A Novel Highly Resilient Nanocomposite Hydrogel with Low Hysteresis and Ultrahigh Elongation

Summary: A series of high clay content Laponite XLS/polyacrylamide (PAAm) nanocomposite hydrogels (S‐M gels) with excellent resilience, low elastic hysteresis, and ultrahigh elongation, have been successfully synthesized. Based on our results, it is concluded that the mechanical properties of nanocomposite hydrogels probably depend to a great extent on the hydrophilicity and flexibility of the macromolecules. Moreover, it is found that the transparency during the in‐situ polymerization of S‐M gels does not change, which is quite different from clay/poly(N‐isopropylacrylamide) nanocomposite hydrogels.

Formation of nanocomposite hydrogels using Clay‐S by in‐situ polymerization.     

Synthesis and Characterization of Chitosan Grafted Oligo(L‐lactic acid)

Chitosan grafted oligo(L ‐lactic acid) copolymers with different length of side chain were prepared through the reaction of terminal aldehyde group of oligo(L ‐lactic acid) (OLLA) and amino groups of chitosan. The mean molecular mass of the grafting OLLA chain was ca. 600 ～ 5 000. The graft copolymers are soluble in DMSO, DMF and acetic acid. The synthesis method and structure described here provide chitosan‐g‐OLLA copolymers with broad applicability.

Structure of chitosan‐g‐oligo(L ‐lactic acid).     

A Catalytic Approach to Functional Poly(1,4‐ketone)s Bearing Pendant Monosaccharide Fragments

Summary: Novel alternating polyketone‐based polymers bearing pendant saccharide units that are accessible by polymerization catalysis are presented. The materials were synthesized by polymerization of carbon monoxide and α‐olefins containing protected glucose or N‐acetyl glucosamine residues. The dicationic Pd^II bis(phoshine) complex [Pd(dppp)(NCCH₃)₂](BF₄)₂ was used as a catalyst precursor. An O‐deacetylation of the copolymers afforded materials with amphiphilic character.

Structure of the poly(1,4‐ketone) copolymers synthesized here.     

Facile Fabrication of pH‐Responsive and Size‐Controllable Polymer Vesicles From a Commercially Available Hyperbranched Polyester

A novel pH‐responsive polymer vesicle obtained by the aqueous self‐assembly of carboxy‐terminated hyperbranched polyesters is reported. The synthesis is very simple, just a one‐step esterification of the commercially available hydroxy‐terminated hyperbranched polyester of Boltorn Hx (x = 20, 30, 40) with succinic anhydride. The vesicle size can be controlled from 200 nm to 10 µm by simply adjusting the solution pH as well as the degrees of branching (or generation).

     

Supramolecular Dynamics as Origin for Thermally Induced Insoluble‐to‐Soluble‐to‐Insoluble Transitions of Copolymers in Water

The synthesis of cationic mono‐(6‐O‐(1‐vinylimidazolium))‐ß‐cyclodextrin with toluenesulfonate as the corresponding anion is described. Free‐radical copolymerization of the resulting host–guest complex with N‐isopropylacrylamide or N,N‐diethylacrylamide yielded copolymers showing a temperature‐controlled solubility window in water. The impact of different anionic guests and salt concentrations on solubility behavior was investigated via turbidity measurements.

     

Construction of Glycosylated Surfaces for Poly(propylene) Beads with a Photoinduced Grafting/Chemical Reaction Sequence

Surface modification of commercial PPBs with different saccharides is described. Surface‐glycosylated PPBs were prepared through reaction between the hydroxyl groups of poly(HEMA) and acetylated saccharides such as α‐glucose pentaacetate, β‐galactose pentaacetate, and lactose octaacetate. The modified PPBs were characterized by XPS and water contact angle measurement. It was found that the grafting degree of poly(HEMA) increases with UV irradiation time, monomer concentration, and water content in solvent. The binding degree of monosaccharides is higher than that of disaccharides. The glycosylated PPBs can selectively recognize lectins, indicating potential for protein isolation.

     

Influence of the Position of the Connecting Spacer of the Chromophore on the Nonlinear Optical Response

A new chromophore, C1 , based on a similar DπA‐structure as in the FTC ‐chromophore but with a hydroxyalkyl spacer perpendicular to the direction of the dipole moment was synthesized. Both chromophores and the CLD ‐chromophore were used to prepare high T_g nonlinear optical vinyl polymers. The influence of the position of the spacer on the DπA‐system on the NLO response of the resulting polymers was investigated.

     

Multifunctional Poly(2‐oxazoline) Nanoparticles for Biological Applications

New multifunctional copoly(2‐oxazoline) nanoparticles were prepared for cell studies. The polymer contains double‐bond side chains as potential reaction sites for “thio”‐click reactions as well as a fluorescein label covalently bound to the polymer backbone. Using the nanoprecipitation technique, spherical nanoparticles of 200–800 nm were obtained. Confocal laser scanning microscopy measurements revealed the cellular uptake of the nanoparticles.

     

Single‐Chain‐Particles of Poly(N‐isopropylacrylamide)

Spherical single‐chain‐particles of poly(N‐isopropylacrylamide) were prepared in aqueous solution above the lower critical solution temperature upon the addition of sodium dodecyl sulfate. The size of the single‐chain‐particles was investigated by means of transmission electron microscopy and viscosity measurements of the corresponding solutions, indicating the absence of inter‐chain entanglements among the single‐chain‐particles.

Schematic of the preparation of PNIPAM single‐chain‐globules in solution.     

Oligomerization of Electron‐Deficient Vinyl Monomers Through an Ate‐Complex Mechanism: A New Role for B(C6F5)3 Lewis Acid

The Lewis acid B(C₆F₅)₃ in combination with hydrosilanes exhibits remarkable activity in the oligomerization of sulfone‐ and phosphonate‐based monomers. This process opens new routes to high‐tech silicone‐based materials, i.e., thermoplastic elastomers and heat‐resistant polysiloxanes.

     

pH‐Responsive Self‐Assembly by Molecular Recognition on a Macroscopic Scale

Macroscopic pH‐responsive self‐assembly is successfully constructed by polyacrylamide(pAAm)‐based gels carrying dansyl (Dns) and β‐cyclodextrin (βCD) residues, which are represented as Dns‐gel and βCD‐gel, respectively. Dns‐gel and βCD‐gel assemble together at pH ≥ 4.0, but disassemble at pH ≤ 3.0. The adhesion strengths for pairs of Dns‐gel/βCD‐gel increase with increasing pH. The fluorescence study on the model system of pAAm modified with 1 mol% Dns moieties (pAAm/Dns) reveals that Dns residues are protonated at a lower pH, which results in the reduction in binding constant (K) for Dns residues and βCD.

     

Direct Observation of α‐Chloro‐p‐quinodimethane as the Real Monomer in the Gilch Polymerization Leading to Poly(p‐phenylene vinylene)s

It is the general consensus that in Gilch polymerizations the 1,4‐bis(chloromethylene)benzene starting material first changes into p‐quinodimethane intermediates which then act as the real monomers. However, direct observation of these intermediates has not been possible so far. This is because usually the p‐quinodimethane auto‐initiates its rapid radical polymerization instantaneously, keeping its concentration extremely low throughout the whole process. Here it is shown that, when the reaction is carried out at very low temperatures, the formation of p‐quinodimethane still proceeds but chain growth is suppressed. Hence, the concentration of the active monomer reaches a level sufficient for NMR analysis.

     

Hybrid Nonlinear Optical Materials Containing Imidazole Chromophore through the Sol‐Gel Process

A new sol‐gel hybrid film based on heterocyclic chromophore, namely 2‐[4′‐(N‐ethyl‐N‐hydroxyethyl)amino phenyl azo]‐4,5‐dicyanoimidazole (IZ), has been synthesized and characterized. The hybrid system possesses a high chromophore loading density up to 65 wt.‐% without observing a phase separation. The initial decomposition temperatures of the chromophore and hybrid material were determined to be 260 and 272 °C, respectively. Poled films show a fairly high and stable nonlinear optical (NLO) response, even at an elevated temperature.

     

Directed Diffusion Approach for Preparing Atomistic Models of Crosslinked Epoxy for Use in Molecular Simulations

A directed diffusion approach is used to create atomistic models of crosslinked epoxy. In polymerization‐based approaches for preparing epoxy model structures, conversions higher than 95% are difficult to achieve due to very slow diffusion of unreacted monomers and crosslinkers in the partially formed network. This problem is overcome by creating very long bonds in the polymerization stage, and then relaxing these to equilibrium values by using a directed‐diffusion‐based relaxation strategy. The method minimizes the use of custom code by relying on the in‐built functionality in LAMMPS package (S. Plimpton, J. Comput. Phys. 1995 , 117, 1). The approach allows for near‐complete conversion (≈99%) and the thermal and volumetric properties of the structures so prepared show good agreement with experimental data.

     

Organosilicon‐Assisted Transformation of Living Anionic into Living Cationic Polymerization

A novel method is described for transforming an anionic polymerization process into a cationic polymerization process assisted by organosilyl groups. The reaction of the p‐tolyldimethylsilyl end group of polystyrene and trifluoromethanesulfonic acid produced a silyl triflate end group that served as a macroinitiator for the living cationic polymerization of isobutyl vinyl ether. The Si O linkage in the block copolymers underwent specific cleavage by reaction with tetrabutylammonium fluoride.