Deformation texture prediction: from the Taylor model to the advanced Lamel model

The paper reports on a recent effort to develop a statistical (or Monte-Carlo) model for quantitative deformation texture prediction which is yet fast enough for implementation in every Gauss point of an FE simulation of a metal-forming process. The principles of Taylor-type models for the prediction of deformation textures of polycrystalline materials are reminded. This includes the full-constraints Taylor theory (every grain of a polycrystal undergoes the same plastic deformation), classical Relaxed Constraints Taylor theory (one or two of the components of the local velocity gradient tensor need not be the same for all grains) and multi-grain models (LAMEL model; mentioning of GIA model). The primal–dual structure of the equations relating strain rates with slip rates, and those relating stresses and resolved shear stresses on slip systems, is made clear. It is then possible to describe the basic philosophy and the mathematical implementation of a new model, called “advanced Lamel model” (ALAMEL). This model is more generally applicable than the previously developed LAMEL model, which is only valid for rolling. Both take interactions between neighbouring grains into account. Finally, quantitative comparisons are given between experimentally observed rolling textures and the predictions of the new model, as well as of other models: full-constraints and relaxed constraints Taylor, LAMEL, GIA, visco-plastic self-consistent and crystal plasticity finite element (CPFEM) models. This was done for IF steel (one thickness reduction) and for two aluminium alloys: AA1200 (five thickness reductions) and AA5182 (one thickness reduction). It was found that for AA1200, the new model is on average the best; for the two other cases, it is among the best models, but the LAMEL or CPFEM models are better. These results suggest that in spite of all simplifications, the ALAMEL model captures (and identifies) the domination mechanisms controlling the development of deformation textures in cubic metals.     

A screw dislocation nucleated from a triple junction

Dislocation mechanism is still considered to be an effective way in plastic deformation of nanocrystalline materials. The possible nucleation of a screw dislocation from the triple junction is explored. The nucleation of a screw dislocation is found to be rather difficult from the triple junction with well-bonded grain boundaries due to the small singularity (0 to −1/3) introduced by the elasticity anisotropy. For the triple junction with a free sliding grain boundary, the stress singularity is higher than −0.5 and dislocations can be spontaneously nucleated for grain sizes less than 100 nm.     

Effects of lattice misorientations on strain heterogeneities in FCC polycrystals

It is well documented that the highly heterogeneous deformation behaviour and lattice rotation typically observed within grains in a polycrystal are attributed to microstructural features such as grain structure, topology, size, etc. In this work, the effects of low- and high-angle grain boundaries on the mechanical behaviour of FCC polycrystals are investigated using a micro-mechanical model based on crystal plasticity theory. The constitutive framework relies on dislocation mechanics concepts to describe the plastic deformation behaviour of FCC metallic crystals and is validated by comparing the measured and predicted local and macroscopic deformation behaviour in a thin Al-0.5% Mg polycrystal tensile specimen containing a relatively small number of surface grains. Comparisons at the microscopic (e.g. local slip distribution) and macroscopic (e.g. average stress-strain response) levels elucidate the role of low-angle grain boundaries, which are found to have a profound effect on both the local and average deformation behaviour of FCC polycrystals with a small number of grains. However, this effect diminishes when the number of grains increases and becomes negligible in bulk polycrystals. In light of the widely accepted view that high-angle grain boundaries strongly influence the mechanical behaviour of very fine-grained metals, this work has shown that low-angle grain boundaries can also play an equally important role in the deformation behaviour of polycrystals with a relatively small number of grains.     

Recoverable creep deformation and transient local stress concentration due to heterogeneous grain-boundary diffusion and sliding in polycrystalline solids

Numerical simulations are used to investigate the influence of heterogeneity in grain-boundary diffusivity and sliding resistance on the creep response of a polycrystal. We model a polycrystal as a two-dimensional assembly of elastic grains, separated by sharp grain boundaries. The crystal deforms plastically by stress driven mass transport along the grain boundaries, together with grain-boundary sliding. Heterogeneity is idealized by assigning each grain boundary one of two possible values of diffusivity and sliding viscosity. We compute steady state and transient creep rates as functions of the diffusivity mismatch and relative fractions of grain boundaries with fast and slow diffusion. In addition, our results show that under transient conditions, flux divergences develop at the intersection between grain boundaries with fast and slow diffusivity, which generate high local stress concentrations. The stress concentrations develop at a rate determined by the fast diffusion coefficient, and subsequently relax at a rate determined by the slow diffusion coefficient. The influence of the mismatch in diffusion coefficient, loading conditions, and material properties on the magnitude of this stress concentration is investigated in detail using a simple model problem with a planar grain boundary. The strain energy associated with these stress concentrations also makes a small fraction of the plastic strain due to diffusion and sliding recoverable on unloading. We discuss the implications of these results for conventional polycrystalline solids at high temperatures and for nanostructured materials where grain-boundary diffusion becomes one of the primary inelastic deformation mechanisms even at room temperature.     

An experimental study on grain deformation and interactions in an Al-0.5%Mg multicrystal

Heterogeneous plastic deformation behavior of a coarse-grained Al-0.5%Mg multicrystal was investigated experimentally at the individual grain level. A flat uniaxial tensile specimen consisting of a single layer of millimeter-sized grains was deformed quasi-statically up to an axial strain of 15% at room temperature. The initial local crystallographic orientations of the grains and their evolutions after 5, 12, and 15% plastic strains were measured by electron backscattered diffraction pattern analysis in a scanning electron microscope. The local in-plane plastic strains and rigid body rotations of the grains were measured by correlation of digital optical video images of the specimen surface acquired during the tensile test. It is found that both intergranular and intragranular plastic deformation fields in the aluminum multicrystal specimen under uniaxial tension are highly heterogeneous. Single or double sets of slip-plane traces were predominantly observed on the electro-polished surfaces of the millimeter-sized grains after deformation. The active slip systems associated with these observed slip-plane traces were identified based on the grain orientation after deformation, the Schmid factor, and grain interactions in terms of the slip-plane trace morphology at grain boundaries. It is found that the aluminum multicrystal obeys neither the Sachs nor the Taylor polycrystal deformation models but deforms heterogeneously to favor easy slip transmission and accommodation among the grains.     

Grain boundary interface mechanics in strain gradient crystal plasticity

Interactions between dislocations and grain boundaries play an important role in the plastic deformation of polycrystalline metals. Capturing accurately the behaviour of these internal interfaces is particularly important for applications where the relative grain boundary fraction is significant, such as ultra fine-grained metals, thin films and micro-devices. Incorporating these micro-scale interactions (which are sensitive to a number of dislocation, interface and crystallographic parameters) within a macro-scale crystal plasticity model poses a challenge. The innovative features in the present paper include (i) the formulation of a thermodynamically consistent grain boundary interface model within a microstructurally motivated strain gradient crystal plasticity framework, (ii) the presence of intra-grain slip system coupling through a microstructurally derived internal stress, (iii) the incorporation of inter-grain slip system coupling via an interface energy accounting for both the magnitude and direction of contributions to the residual defect from all slip systems in the two neighbouring grains, and (iv) the numerical implementation of the grain boundary model to directly investigate the influence of the interface constitutive parameters on plastic deformation. The model problem of a bicrystal deforming in plane strain is analysed. The influence of dissipative and energetic interface hardening, grain misorientation, asymmetry in the grain orientations and the grain size are systematically investigated. In each case, the crystal response is compared with reference calculations with grain boundaries that are either ‘microhard’ (impenetrable to dislocations) or ‘microfree’ (an infinite dislocation sink).     

Numerical investigation of grain boundary effects on elevated-temperature deformation and fracture

A three-dimensional (3D) polycrystal intergranular model that accounts for grain boundary deformation and intergranular weakening at elevated temperatures is presented. The effects of grain boundaries on the accumulated slip deformation of grain interiors and lattice rotation have been investigated through a comparison between results from a model including grain boundary region (GBM) and a model representing only the grain interiors not the grain boundary region directly (NGBM). It is found that the presence of grain boundaries seems to suppress the grain interior slip deformation, and this suppressive role is reduced with increased relative thickness of the grain boundaries. In addition, grain boundaries promote the lattice rotation of individual grains in shear bands but suppress that of individual grains within non-shear bands. Mutual rotation of grains in both shear and non-shear bands is caused by the introduction of grain boundary regions. Rate-dependence of high-temperature plasticity could be more accurately captured by the GBM than by the NGBM. By considering creep damage of grain boundary, when the damage variable reaches a critical value, the corresponding grain boundary element is eliminated to describe dynamic intergranular fracture processes. The volume-averaged stress–strain curve by a model considering grain boundary damage (DGBM) showed better agreement with experimental results than that by a model not considering grain boundary damage (GBM).     

Stress distribution near grain boundary in anisotropic bicrystals and tricrystals

The rate dependent crystallographic finite element program was implemented in ABAQUS as a UMAT for the analysis of the stress distributions near grain boundary in anisotropic bicrystals and tricrystals, taking the different crystallographic orientations into consideration. The numerical results of bicrystals model with the different crystallographic orientations shows that there is a high stress gradient near the grain boundaries. The characteristics of stress structures are dependent on the crystallographic orientations of the two grains. The existing of triple junctions in the tricrystals may result in the stress concentrations, or may not, depending on the crystallographic orientations of the three grains. The conclusion shows that grain boundary with different crystallographic orientations can have different deformation, damage, and faUure behaviors. So it is only on the detail study of the stress distribution can the metal fracture be understood deeply.     

Multiscale modelling of the plastic anisotropy and deformation texture of polycrystalline materials

A hierarchical multilevel method is presented for the plastic deformation of polycrystalline materials with texture-induced anisotropy. It is intended as a constitutive material model for finite element codes for the simulation of metal forming processes or for the prediction of forming limits. It consists of macroscopic models of which the parameters are to be identified using the results of two-level (meso/macro) or three-level (micro/meso/macro) models. A few such two-level models are presented, ranging from the full-constraints Taylor model to the crystal-plasticity finite element models, including the grain interaction models GIA, LAMEL and ALAMEL. Validation efforts based on experimental cold rolling textures obtained for steel and aluminium alloys are shortly discussed. An assessment is also given of the assumptions of the LAMEL and ALAMEL models concerning stress and strain rate heterogeneity at grain boundaries, based on the results of a crystal plasticity finite element study. Finally a recent three-level model which also looks at the microscopic level (dislocation substructure) is discussed.     

Constitutive modeling for nanocrystalline metals based on cooperative grain boundary mechanisms

In nanocrystalline metals, the plastic deformation is accommodated primarily at the grain boundaries. Yang and Wang (J. Mech. Phys. Solids, 2003) suggested a deformation model based on clusters consisting of nine grains and incorporating both the Ashby-Verrall mechanism and a 30° rotation of closely linked pairs of grains. In the present article, the insertion and rotation processes are considered together as a cooperative deformation mechanisms, and the degree to which each process contributes is determined by the application of the principle of maximum plastic work. Plane strain and three-dimensional constitutive relations based on this concept are derived for which a general stress state drives the orientation evolution of various grain clusters under the Reuss assumption. Detailed calculation shows that the strain rate depends linearly on the stress, with the values of the coefficients in this linear relationship dictated by the microscopic energy dissipation. The deformation contributed to the overall response by the grain boundary mechanism is discussed in the spirit of the Hashin-Shtrikman bounds.     

Three-dimensional local stress analysis on grain boundaries in polycrystalline material

In order to understand the initiation behavior of microstructurally small cracks in a stress corrosion cracking condition, it is important to know the tensile normal stress acting on the grain boundary (normal GB stress). The local stress in a polycrystalline body is enhanced by the inhomogeneity which stems from the shape and orientation of each grain. The stress in a three-dimensional polycrystalline body consisting of 100 grains with random orientation, under a remote uniform tensile stress condition, is evaluated by the finite element method. It was revealed that the local stress on the polycrystalline body is inhomogeneous under uniform applied stress and becomes large at those grain boundaries that are perpendicular to the load axis, though there is large fluctuation. It was also shown that the normal GB stress tends to be large near the triple points due to the deformation constraint caused by adjacent grains. Finally, the maximum stress on the surface of a large component caused by the inhomogeneity was evaluated by using Gumbel statistics.     

双相不锈钢循环微变形行为的原位试验研究

对双相不锈钢开展拉伸和应力循环控制下的原位试验研究,选择特征区域对其局部微变形行为的产生、分布和演化进行了研究和讨论．结果表明：双相不锈钢在较低的载荷作用下内部出现明显的应变梯度,随着拉伸载荷或循环周次的增长,其局部微应变不断增加,最大应变在奥氏体相、小晶粒、狭窄晶粒和不平整的晶界区不断汇集,同一时刻的局部最大微应变远大于宏观应变;循环载荷作用下双相不锈钢在微观尺度产生了局部微棘轮变形效应,微棘轮应变随着循环周次的增加不断累积,其增长速度逐渐降低并趋于饱和;随着循环周次的增加,最大微棘轮变形区逐渐扩展、联通形成大塑性变形带,晶粒走向呈45°方向时,变形带贯穿两相向垂直加载方向发展,而晶粒呈树根状走向时,由于受到两相交互和铁素体的阻碍作用,微棘轮变形带主要集中在奥氏体中沿着奥氏体晶粒走向发展．     

X-ray microdiffraction and strain gradient crystal plasticity studies of geometrically necessary dislocations near a Ni bicrystal grain boundary

We compare experimental measurements of inhomogeneous plastic deformation in a Ni bicrystal with crystal plasticity simulations. Polychromatic X-ray microdiffraction, orientation imaging microscopy and scanning electron microscopy, were used to characterize the geometrically necessary dislocation distribution of the bicrystal after uniaxial tensile deformation. Changes in the local crystallographic orientations within the sample reflect its plastic response during the tensile test. Elastic strain in both grains increases near the grain boundary. Finite element simulations were used to understand the influence of initial grain orientation and structural inhomogeneities on the geometrically necessary dislocations arrangement and distribution and to understand the underlying materials physics.     

Multiscale strain measurements of plastically deforming polycrystalline titanium: Role of deformation heterogeneities

The purpose of this work was to characterize the spatial distribution of residual deformation at the mesoscale (a few grains) and at the macroscale (hundreds of grains) in titanium subjected to cyclic tensile loading. Using ex situ digital image correlation, we compared the axial residual strain fields obtained at optical magnifications ranging from 3.2× to 50×. To compare the results obtained at different optical magnifications, numerous images at higher magnification had to be assembled to encompass the same field-of-view observed at lower magnifications. The strain fields at the highest optical magnification revealed deformation patterns that were not detectable at lower magnifications. These deformation patterns appeared as inclined slip bands near grain boundaries and grain boundary triple points, with the bands sometimes crossing into neighboring grain interiors. Measurements made at optical magnifications greater than 10× captured an underlying deformation pattern, however, considerably more detail within grains was obtained at 50× magnification. The strain fields obtained at 10× and 50× magnifications were subsequently used to estimate the length scale of a representative volume element (RVE) based on the standard deviation of the average residual strain. The estimated RVE length scale was nearly three times the average grain diameter if extracted from the 50× results. The estimate of the RVE length scale was smaller at lower magnification which was due to a homogenizing effect caused by the low measurement resolution. Thus, care must be taken when experimentally obtaining RVE length scale estimates.     

Geometrically necessary dislocations in viscoplastic single crystals and bicrystals undergoing small deformations

In this study we develop a gradient theory of small-deformation single-crystal plasticity that accounts for geometrically necessary dislocations (GNDs). The resulting framework is used to discuss grain boundaries. The grains are allowed to slip along the interface, but growth phenomenona and phase transitions are neglected. The bulk theory is based on the introduction of a microforce balance for each slip system and includes a defect energy depending on a suitable measure of GNDs. The microforce balances are shown to be equivalent to nonlocal yield conditions for the individual slip systems, yield conditions that feature backstresses resulting from energy stored in dislocations. When applied to a grain boundary the theory leads to concomitant yield conditions: relative slip of the grains is activated when the shear stress reaches a suitable threshold; plastic slip in bulk at the grain boundary is activated only when the local density of GNDs reaches an assigned threshold. Consequently, in the initial stages of plastic deformation the grain boundary acts as a barrier to plastic slip, while in later stages the interface acts as a source or sink for dislocations. We obtain an exact solution for a simple problem in plane strain involving a semi-infinite compressed specimen that abuts a rigid material. We view this problem as an approximation to a situation involving a grain boundary between a grain with slip systems aligned for easy flow and a grain whose slip system alignment severely inhibits flow. The solution exhibits large slip gradients within a thin layer at the grain boundary.     

考虑晶界效应的多晶体有限变形分析

将晶界及其影响区综合考虑，建立了考虑晶界效应的力学模型，结合晶体塑性理论，利用有限变形有限元对多晶体进行数值模拟，数值结果显示了细观层次下晶粒变形场的特点，理论计算同实验定性一致。     

Grain-boundary sliding and separation in polycrystalline metals: application to nanocrystalline fcc metals

In order to model the effects of grain boundaries in polycrystalline materials we have coupled a crystal-plasticity model for the grain interiors with a new elastic-plastic grain-boundary interface model which accounts for both reversible elastic, as well irreversible inelastic sliding-separation deformations at the grain boundaries prior to failure. We have used this new computational capability to study the deformation and fracture response of nanocrystalline nickel. The results from the simulations reflect the macroscopic experimentally observed tensile stress-strain curves, and the dominant microstructural fracture mechanisms in this material. The macroscopically observed nonlinearity in the stress-strain response is mainly due to the inelastic response of the grain boundaries. Plastic deformation in the interior of the grains prior to the formation of grain-boundary cracks was rarely observed. The stress concentrations at the tips of the distributed grain-boundary cracks, and at grain-boundary triple junctions, cause a limited amount of plastic deformation in the high-strength grain interiors. The competition of grain-boundary deformation with that in the grain interiors determines the observed macroscopic stress-strain response, and the overall ductility. In nanocrystalline nickel, the high-yield strength of the grain interiors and relatively weaker grain-boundary interfaces account for the low ductility of this material in tension.     

Micromechanical deformation analysis of beta alloy titanium in elastic and elastic/plastic tension

An experimental analysis was conducted to document micromechanical behavior of a large grain beta alloy titanium in elastic and elastic/plastic tension. The deformation associated with individual grains was measured by microscopic moiré interferometry. After subtracting uniform strains, the multiplied fringe patterns revealed strong anomalies. The anomalous deformation was documented even at the early stage of loading. Slip along grain boundaries was not observed, but strong shear strains developed within the grains near grain boundaries. Paper was presented at the 1994 SEM spring conference on Experimental Mechanics held in Baltimore, MD, on June 6–8.     

The role of heterogeneous deformation on damage nucleation at grain boundaries in single phase metals

The mechanical response of engineering materials evaluated through continuum fracture mechanics typically assumes that a crack or void initially exists, but it does not provide information about the nucleation of such flaws in an otherwise flawless microstructure. How such flaws originate, particularly at grain (or phase) boundaries is less clear. Experimentally, “good” vs. “bad” grain boundaries are often invoked as the reasons for critical damage nucleation, but without any quantification. The state of knowledge about deformation at or near grain boundaries, including slip transfer and heterogeneous deformation, is reviewed to show that little work has been done to examine how slip interactions can lead to damage nucleation. A fracture initiation parameter developed recently for a low ductility model material with limited slip systems provides a new definition of grain boundary character based upon operating slip and twin systems (rather than an interfacial energy based definition). This provides a way to predict damage nucleation density on a physical and local (rather than a statistical) basis. The parameter assesses the way that highly activated twin systems are aligned with principal stresses and slip system Burgers vectors. A crystal plasticity-finite element method (CP-FEM) based model of an extensively characterized microstructural region has been used to determine if the stress–strain history provides any additional insights about the relationship between shear and damage nucleation. This analysis shows that a combination of a CP-FEM model augmented with the fracture initiation parameter shows promise for becoming a predictive tool for identifying damage-prone boundaries.