Synthesis and photoelectric characterization of semiconductor CdSe microrod array by a simple electrochemical synthesis method

It is reported here that the microrod array of CdSe on indium doped tin oxide coated conducting glass (ITO) substrate has been developed by a simple electrochemical synthesis method. The electrodeposition of CdSe was also investigated by cyclic voltammetric technique. The sample was characterized by XRD, EDX, FESEM and UV-vis spectroscopic. The X-ray diffraction investigation demonstrates that the CdSe microrod is a uniform hexagonal CdSe crystal. EDX shows that the high purity CdSe is obtained. Field emission scanning electron microscope (FESEM) results show that the microrods’ length, diameter, and direction of growth are nearly uniform and perpendicular to the ITO substrate. UV-vis absorption spectrum study shows the presence of direct transition with the band gap energy 2.13 eV. Photoelectrochemical solar cells are constructed using CdSe microrod array as the photocathode in polysulphide electrolyte and their power output characteristics are studied.     

VLS synthesis of disordered CdSe nanowires and optical properties of an individual CdSe nanowire

Disordered CdSe nanowires have been successfully grown on silicon substrates by Au-catalyzed vapor–liquid–solid (VLS) mechanism. Scanning electron microscopy (SEM) reveals that the as-prepared products consist of a large quantity of 1D nanowire disordered predominantly perpendicular to the surface of the substrate. A plausible formation mechanism of disordered CdSe nanowires is proposed here. X-ray diffraction (XRD) and high-resolution transmission electron microscopy (HRTEM) confirm on their hexagonal wurtzite crystallite structure. An intense red near-band edge emission (702 nm) is observed based on room temperature photoluminescence measurements of individual nanowire. This kind of CdSe nanostructures may be used in optoelectronics devices in the near future.     

Polyol-thermal synthesis of silver nanowires for Hg<Superscript>2+</Superscript> sensing detection

This study demonstrates a facile but effective polyol-thermal reaction method for the synthesis of silver nanowires in autoclaves (160–180 °C). By this approach, the generated silver nanowires show an average diameter of ~40 nm and length up to tens of micrometers with a high yield and potential for large-scale production. To achieve shape- and size-controlled Ag nanowires, several experimental parameters were investigated and optimized, including surface controller(s), molar ratio of surfactant(s) to silver ions, temperature, and concentration of reactants. The structure and composition of silver nanowires were characterized by transmission electron microscopy (TEM), high-resolution TEM (HRTEM), scanning electron microscopy (SEM), and X-ray diffraction (XRD) techniques. In particular, the twinned crystal structure observed in both spherical particles and nanowires was analyzed by HRTEM technique, and the possible formation and growth mechanisms were discussed. The optical property of the as-prepared product was measured by ultraviolet–visible (UV–vis) spectroscopy. The sensing detection of metal ions (e.g., Hg²⁺) using the obtained silver nanowires in aqueous media was finally investigated.     

Electrosynthesis and characterization of Fe doped CdSe thin films from ethylene glycol bath

The CdSe and Fe doped CdSe (Fe:CdSe) thin films have been electrodeposited potentiostatically onto the stainless steel and fluorine doped tin oxide (FTO) glass substrates, from ethylene glycol bath containing (CH₃COO)₂·Cd·2H₂O, SeO₂, and FeCl₃ at room temperature. The doping concentration of Fe is optimized by using (photo) electrochemical (PEC) characterization technique. The deposition mechanism and Fe incorporation are studied by cyclic voltammetry. The structural, surface morphological and optical properties of the deposited CdSe and Fe:CdSe thin films have been studied by X-ray diffraction, scanning electron microscopy (SEM) and optical absorption techniques respectively. The PEC study shows that Fe:CdSe thin films are more photosensitive than that of undoped CdSe thin films. The X-ray diffraction analysis shows that the films are polycrystalline with hexagonal crystal structure. SEM studies reveal that the films with uniformly distributed grains over the entire surface of the substrate. The complete surface morphology has been changed after doping. Optical absorption study shows the presence of direct transition and a considerable decrease in bandgap, E_g from 1.95 to 1.65 eV.     

Dual-shunt branch circuit and harmonic suppressed device application

The morphological manipulation, structural characterization, and optical properties of different CdSe nanocrystals were reported. Several different CdSe nanostructures, including nanowires, tetrapod crystals, and nanoparticles were grown by varying the volume ratio of triethylenetetraamine (TETA) and water (WA) in their mixed solution. By manipulating the growth driving force (i.e., the degree of supersaturation) and kinetics of the process (i.e., growth rate), the morphology and crystal structure of CdSe nanocrystals can be tailored. Growth driving force changed their morphology from nanowires to tetrapod structures and from the latter structure to nanoparticles. Moreover, kinetics of the process altered their crystal structure from wurtzite to zinc blende. The optical property of CdSe nanocrystals was investigated using UV-vis spectroscopy. The absorption edge of CdSe nanostructures showed a blue shift. CdSe nanocrystals prepared under optimized conditions showed good microstructural and optical properties for solar cell application.     

Fluorescence spectra of colloidal self-assembled CdSe nano-wire on substrate of porous Al_2O_3/Au nanoparticles

We present a self-assembly method to prepare array nano-wires of colloidal CdSe quantum dots on a substrate of porous Al_2 O_3 film modified by gold nanoparticles. The photoluminescence(PL) spectra of nanowires are in situ measured by using a scanning near-field optical microscopy(SNOM) probe tip with 100-nm aperture on the scanning near-field optical microscope. The results show that the binding sites from the edge of porous Al_2 O_3 nanopores are combined with the carboxyl of CdSe quantum dots' surface to form an array of CdSe nanowires in the process of losing background solvent because of the gold nanoparticles filling the nano-holes of porous Al_2 O_3 film. Compared with the area of nonself-assembled nano-wire, the fluorescence on the Al_2 O_3/Au/CdSe interface is significantly enhanced in the self-assembly nano-wire regions due to the electron transfer conductor effect of the gold nanoparticles' surface. In addition, its full width at half maximum(FWHM) is also obviously widened. The method of enhancing fluorescence and energy transfer can widely be applied to photodetector, photocatalysis, optical display, optical sensing, and biomedical imaging, and so on.     

A comparative study of conventional type II and inverted core–shell nanostructures based on CdSe and ZnS

The objective of this work is to investigate structural, morphological and optical properties of conventional CdSe/ZnS core–shell and inverted ZnS/CdSe core–shell nanostructures for opto-electronic device applications. For this purpose both nanostructures were synthesized using chemical bath deposition technique in thin film form. The structural properties were studied using X-ray diffraction technique with Rietveld refinement and transmission electron microscopy (TEM). The surface morphology of synthesized thin film was illustrated in the form 2D and 3D images using atomic force microscopy (AFM). The optical properties were explained using UV–Vis absorption spectroscopy and photo luminescence (PL) spectroscopy in in situ monitoring process. A comparison of estimated particle size from XRD, high resolution AFM and TEM images was resulted in good agreement as 2.1, 2.4 and 2.1 nm respectively for conventional CdSe/ZnS core–shell and as 2.5, 2.5 and 2.2 nm respectively for inverted ZnS/CdSe core–shell nanostructures.     

Catalytic and seeded shape-selective synthesis of II–VI semiconductor nanowires

We demonstrate catalytic and seeded shape-selective growth of CdSe nanostructures by a steady-state vapor-transport process. By varying the powder and sample temperatures, we observe a transition from a regime where catalytic growth is dominant to a metal-free self-induced nucleation regime. We then show that the best structural and optical quality are obtained by using CdSe colloidal nanocrystals as seeds for metal-free growth, as indicated by electron microscopy, X-ray diffraction and photoluminescence.     

Preparation and characterization of carbon nanotubes encapsulated GaN nanowires

A novel two-step catalytic reaction is developed to synthesize gallium nitride nanowires encapsulated inside carbon nanotubes (GaN@CNT). The nanowires are prepared from the reaction of gallium metal and ammonium using metals or metal alloys as a catalyst. After the formation of the nanowires, carbon nanotubes are subsequently grown along the nanowires by chemical vapor deposition of methane. The structural and optical properties of pure GaN nanowires and GaN@CNT are characterized using scanning electron microscopy, transmission electron microscopy, X-ray diffraction, energy dispersive X-ray spectroscopy and Raman spectroscopy. The results show that GaN nanowires are indeed encapsulated inside carbon nanotubes. The field emission studies show that the turn-on field of GaN@CNT is higher than that of carbon nanotubes, but substantially lower than that of pure GaN nanowires. This work provides a wide route toward the preparation and applications of new one-dimensional semiconductor nanostructures.     

One-step synthesis of CdTe branched nanowires and nanorod arrays

Single crystalline CdTe branched nanowires and well-aligned nanorod arrays were simultaneously synthesized by a simple chemical vapor deposition (CVD) technique. X-ray diffraction (XRD), scanning electronic microscopy (SEM), transmission electronic microscopy (TEM) and selected area electronic diffraction (SAED) were used to study the crystalline structure, composition and morphology of different samples. Vapor-liquid-solid (VLS) and vapor-solid (VS) processes were proposed for the formation of the CdTe branched nanowires and nanorod arrays, respectively. As-grown CdTe nanorod arrays show a strong red emission band centered at about 620 nm, which can be well fitted by two Gaussian curves centered at 610 nm and 635 nm, respectively.     

Electrosynthesis and characterization of CdSe thin films: Optimization of preparative parameters by photoelectrochemical technique

CdSe thin films have been electrodeposited potentiostatically onto stainless-steel and fluorine-doped tin oxide-coated glass substrates from an aqueous acidic bath using cadmium acetate ((CH₃COO)₂Cd·2H₂O) as a Cd ion source. Preparative parameters such as deposition potential, solution concentration, bath temperature, pH of the electrolytic bath and deposition time have been optimized by using photoelectrochemical (PEC) technique to obtain well adherent and uniform thin films. The electrodeposits were dark brown in colour. The films have been characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and optical absorption techniques. XRD studies reveal that films are polycrystalline, with hexagonal crystal structure. SEM shows that the films are compact, with spherical grains. Optical absorption studies reveal that the material exhibits a direct optical transition having band gap energy ∼1.72 eV. PEC study shows that the films are photoactive.     

Surface control of CdSe nanocrystals by UV-exposure in air and successive thermal treatment under ultra high vacuum

Colloidal CdSe nanocrystals were synthesized through a solution process. The CdSe nanocrystals coated on Si(1 0 0) wafers were UV-exposed in either an air or argon atmosphere to distinguish the effect of generated ozone from UV-radiation at 365 nm on the removal of surface capping pyridine molecules. The pyridine on the CdSe nanocrystal's surface could be effectively removed by the ozone generated during UV-exposure with an accompanying highly oxidized surface state of the CdSe nanocrystals. For the removal of surface oxides of CdSe nanocrystals, a successive thermal treatment under ultra high vacuum (UHV) was adopted. The optical energy bandgap measured by using UV-vis absorption spectroscopy showed a red shift with treatment with an increase of annealing temperature. The electronic energy structure of UHV-annealed CdSe nanocrystals film was analyzed in situ using X-ray absorption and photoelectron spectroscopy. A great resemblance was found between the values of the optical and electron energy bandgaps of effectively surface-treated CdSe nanocrystals film after UHV-annealing at 400 °C.     

Comparison between ZnO nanowires grown by chemical vapor deposition and hydrothermal synthesis

Vertically aligned zinc oxide nanowires (NWs) were synthesized by two different techniques: chemical vapor deposition (CVD) and hydrothermal synthesis. To compare the effects of different growth conditions, both F-doped SnO₂ (FTO) coated-glass and silicon wafers were used as substrates. Before NWs growth, all the substrates were covered with a ZnO seed layer film obtained with the same procedure, which acts as nucleation site for the subsequent growth of the nanowires both during CVD and hydrothermal synthesis. We studied the influence of the two synthesis techniques and the growth duration on the final morphology, orientation, and density of the ZnO NWs using electron microscopy and X-ray diffraction, while the NWs optical quality was addressed by UV–Vis spectroscopy. By discussing advantages and disadvantages of both synthesis methods, we finally show that the application purpose often drives the choice of the NWs growth process and the substrate to be used.     

A new large – Scale synthesis of magnesium oxide nanowires: Structural and antibacterial properties

Large-scale one-dimensional magnesium oxide (MgO) nanowires with diameters of 6 nm and lengths of 10 μm have been successfully synthesized by a new facile and simple reaction. This production was performed via a microwave hydrothermal approach at low temperature growth of 180 °C for 30 min. The structure of as synthesized MgO nanowires were investigated by means of X-ray diffraction (X-ray), Fourier Transformation Infrared Spectroscopy (FTIR), Field Emission Scanning Electron Microscopy (FE-SEM), Transmission Electron Microscopy (TEM), Selected Area Electron Diffraction (SAED) and Energy Dispersive X-ray (EDS). The antibacterial behavior of MgO nanowires concentration in solid media against Gram negative and Gram positive for different bacteria has been tested in details. The results show that the MgO nanowires have bacteriostatic activity against Escherichia coli and Bacillus sp. The antibacterial activity increases with increasing MgO nanowires concentration. Furthermore, the presence of one-dimensional MgO nanowires has high antibacterial efficacy and damages the membrane wall of bacteria. Finally, this study offered the prospect of developing ultrafine nanoscale devices utilizing MgO nanowires and implementing their useful potential in biological control.     

Structural and electrical studies of template synthesized copper nanowires

The template strategy combined with electrodeposition technique has been used to produce copper nanowires in the cylindrical pores of track-etched polycarbonate membranes. X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and UV–visible spectroscopy have been used to characterize as-prepared copper nanowires. XRD study shows the face centered cubic crystal structure of copper nanowires. Williamson–Hall (WH) analysis has been used to determine the crystallite size and microstrain induced due to lattice deformation. FESEM results reveal that copper nanowires are continuous, well aligned with uniform diameter and having high aspect ratio. The optical absorption spectra exhibit a strong peak at 568 nm attributed to the surface plasmon resonance. The current–voltage (I–V) characteristics show an ohmic behavior of the fabricated copper nanowires. The increase in resistivity of nanowires than that of bulk counterpart has been attributed to the surface and size effects in nanowires and explained in the light of Fuchs–Sondeimer and Mayadas–Shatzkes models.     

Preparation, conversion, and comparison of the photocatalytic property of Cd(OH)2, CdO, CdS and CdSe

In this paper, we report the hydrothermal preparation of Cd(OH)₂ nanowires and further conversion to CdO nanobelts, CdS nanowires and CdSe nanoparticles through thermal treatment, solvothermal and mixed-solvothermal routes, respectively. The as-obtained products were characterized by means of powder X-ray diffraction (XRD), transmission electron microscopy (TEM), and field emission scanning electron microscopy (FEMSEM). Research showed that four cadmium compounds were good photocatalysts for the degradation of organic dyes such as Safranine T and Pyronine B, under irradiation of 365 nm UV light. The order of catalytic activity of different materials was found to be Cd(OH)₂<CdO<CdS<CdSe.     

Electrochemical synthesis of copper nanowires in anodic alumina membrane and their impedance analysis

Copper (Cu) nanowires having 20 nm diameter were fabricated by electrodeposition within the pores of anodic alumina membrane (AAM) by using template synthesis method. The morphology and composition of nanowires was characterized by scanning electron microscope (SEM) and energy dispersive X-ray fluorescence (EDXRF). X-ray diffraction (XRD) was utilized for structural characterization. Impedance of nanowires was measured at room temperature by leaving the nanowires embedded in the insulating template membrane and small decrease in impedance was found at higher frequency above 10 kHz.     

CdSe/ZnSe核-壳结构纳米粒子合成新方法

报道用“一步”合成新方法制备了CdSe/ZnSe核-壳结构的发光纳米粒子.该方法是将锌的前驱体注入表面Se富集的CdSe发光纳米粒子溶液中,通过Zn²⁺与Se共价键结合,从而在CdSe发光纳米粒子的表面形成ZnSe壳.分别通过X射线粉末衍射、光电子能谱、透射电镜、紫外-可见吸收光谱和光致发光光谱,对核-壳结构的发光纳米粒子的结构及光学性质进行了表征.结果表明,以较宽带隙的ZnSe在较窄带隙的CdSe纳米粒子表面形成的壳层有效地钝化了CdSe纳米粒子的表面缺陷,明显地提高了室温下CdSe纳米粒子的光致发光效率.X射线粉末衍射表明随着Zn²⁺的不断注入,CdSe/ZnSe的衍射峰逐渐移向ZnSe衍射峰.光电子能谱数据显示,Zn2p的双峰分别位于1020,1040eV附近,通过与体材料ZnO相比,确定为Zn²⁺的光电子发射,说明Zn是以共价键形式存在于CdSe纳米粒子的表面.透射电镜照片显示纳米粒子具有良好的单分散性,核-壳结构的发光纳米粒子直径较CdSe核的直径明显增加.     

Solution-phase synthesis of nanomaterials at low temperature

This paper reviews the solution-phase synthesis of nanoparticles via some routes at low temperatures, such as room temperature route, wave-assisted synthesis (γ-irradiation route and sonochemical route), directly heating at low temperatures, and hydrothermal/solvothermal methods. A number of strategies were developed to control the shape, the size, as well as the dispersion of nanostructures. Using diethylamine or n-butylamine as solvent, semiconductor nanorods were yielded. By the hydrothermal treatment of amorphous colloids, Bi₂S₃ nanorods and Se nanowires were obtained. CdS nanowires were prepared in the presence of polyacrylamide. ZnS nanowires were obtained using liquid crystal. The polymer poly (vinyl acetate) tubule acted as both nanoreactor and template for the CdSe nanowire growth. Assisted by the surfactant of sodium dodecyl benzenesulfonate (SDBS), nickel nanobelts were synthesized. In addition, Ag nanowires, Te nanotubes and ZnO nanorod arrays could be prepared without adding any additives or templates. Supported by the National Basic Research Program of China (Grant No. 2005CB623601) and the National Natural Science Foundation of China (Grant No. 20431020)     

Room temperature synthesis and characterization of CdO nanowires by chemical bath deposition (CBD) method

A chemical synthesis process for the fabrication of CdO nanowires is described. In the present work, transparent and conductive CdO films were synthesized on the glass substrate using chemical bath deposition (CBD) at room temperature. These films were annealed in air at 623 K and characterized for the structural, morphological, optical and electrical properties were studied by means of X-ray diffraction (XRD), scanning electron microscopy (SEM), optical and electrical resistivity. The XRD analysis showed that the as-deposited amorphous can be converted in to polycrystalline after annealing. Annealed CdO nanowires are 60-65 nm in diameter and length ranges typically from 2.5 to 3 μm. The optical properties revealed the presence of direct and indirect band gaps with energies 2.42 and 2.04 eV, respectively. Electrical resistivity measurement showed semiconducting behavior and thermoemf measurement showed n-type electrical conductivity.