Elasto‐plastic Hardening and Shakedown of Masonry Arch Joints

The behavior of joints made of sand–lime mortar, such as used in a wide variety of structures from ancient times through the early twentieth century, can be clearly distinguished from the behavior of joints made with hydraulic cement mortar. Experiments on confined mortar specimens have confirmed that the weaker and more ductile sand–lime mortar can be accurately modeled as a Drucker–Prager material with a compression cap and exponential hardening on the cap portion of the yield surface. Joints of sand–lime mortar subject to axial thrust and moment are found experimentally to yield under very small loads, and to follow a linear hardening rule beyond the yield point. This behavior can be replicated analytically using a Drucker–Prager constitutive law with exponential hardening. The yield surface and hardening function for an entire mortar joint are representable by Maier's theory of piecewise linear yield function and interacting yield planes. As a consequence, an arch jointed with sand–lime mortar is found to shake down under moving loads above the yield limit and below the collapse load. The shakedown behavior of a sand–lime mortar jointed masonry arch is confirmed experimentally.Sommario. II comportamento dei giunti realizzati con malta di calce, del tipo di quelli utilizzati in unampia varietà di strutture dall antichità sino allinizio di questo secolo, può essere chiaramente distinto dal comportamento dei giunti realizzati con malta idraulica. Esperimenti condotti su provini confinati di malta hanno infatti evidenziato che il comportamento della malta di calce, meno resistente e più duttile, può essere accuratamente modellato con un materiale di Drucker–Prager, adottando un troncamento della resistenza a compressione ed un incrudimento esponenziale della superficie di snervamento nella porzione troncata. Si è rilevato sperimentalmente che i giunti di malta di calce, soggetti a sforzo assiale e momento flettente, raggiungono lo snervamento sotto carichi molto modesti, e quindi seguono una legge di incrudimento lineare oltre il punto di snervamento. Questo comportamento può essere riprodotto analiticamente utilizzando la legge costitutiva di Drucker–Prager con incrudimento esponenziale. La superficie di snervamento e la funzione di incrudimento per un giunto di malta sono rappresentabili mediante la teoria di Maier delle funzioni di snervamento lineari a tratti e dei piani di snervamento interagenti. Di conseguenza, un arco con giunti di malta di calce perviene alladattamento plastico (shakedown) sotto carichi mobili superiori al limite di snervamento ed inferiori al carico di collasso. Tale raggiungimento della condizione di adattamento plastico di archi di muratura con giunti di malta di calce è confermato sperimentalmente.     

On the Quasi‐Steadiness Hypothesis as Applied to Gas Exhaustion from a Receiver

A semiempirical method of determining the stabilization time for a quasisteady mode of gas exhaustion from a receiver after sudden opening of the nozzle and the time evolution of the real flow rate at the stage of the transitional process are considered. The numerical solution of the equations of exhaustion gas dynamics in a twodimensional formulation and the results of model experiments demonstrated that the method can be used to estimate the conditions of applicability of the quasisteadiness hypothesis and to determine the discharge coefficient of the nozzle with controlled accuracy.     

Evolution of the Diffusion Mixing Layer of Two Gases upon Interaction with Shock Waves

A mathematical model of mechanics of a twovelocity twotemperature mixture of gases is developed. Based on this model, evolution of the mixing layer of two gases with different densities under the action of shock and compression waves is considered by methods of mathematical simulation in the onedimensional unsteady approximation. In the asymptotic approximation of the full model, a solution of an initialboundary problem is obtained, which describes the formation of a diffusion layer between two gases. Problems of interaction of shock and compression waves with the diffusion layer are solved numerically in the full formulation. It is shown that the layer is compressed as the shock wave traverses it; the magnitude of compression depends on shockwave intensity. As the shock wave passes from the heavy gas to the light gas, the mixing layer becomes overcompressed and expands after shockwave transition. The wave pattern of the flow is described in detail. The calculated evolution of the mixinglayer width is in good agreement with experimental data.     

One Singularly Perturbed Problem of Turbulent Gas Dynamics

The problem of the interaction of a Prandtl–Mayer wave with a shear layer is solved using the small parameter method for the case where the flow vorticity in the shear layer is small. A direct expansion is constructed and its inadequacy at large distances from the vortex layer is proved. The strained coordinate method is used to obtain a uniformly adequate expansion. It is shown that for certain velocity distributions in the shear layer, the characteristics in the reflected simple wave resulting from the interaction intersect each other and a shock arises in the flow. There coordinates of the shock origin and the function describing the shock shape are obtained.     

Transcritical Flow over a Ramp in an Open Channel

Steady free-surface flows over an elongated obstacle located on the channel bottom are studied theoretically and experimentally. For determining the free-surface shape and the main flow parameters, the first and second shallow-water approximations are used. In the second approximation, a solution describing a smooth transition from the subcritical to superctitical flow is found. A mathematical model of the hydraulic jump behind the ramp is constructed. The results of the mathematical modeling are compared with experimental data.     

Two Theoretical Elasticity Micromechanics Models

This study is concerned with the Composite Spheres (Cylinders) Model and the Generalized Self Consistent Method (GSCM). A detailed examination of the two models proves the two models are the same in the limited cases where they both give solutions. In this process of comparison between the two models, a new solution is found for the shear property of a closed cell foam type idealization.     

Design of a Beam with Controllable Force Elements

A method for solving the problem of design of an intellectual structure formulated for the pair optimal position of actuators, optimal control of actuators is developed. In the method proposed, physical and logical objects are treated as equivalent.     

Effect of Allowance for Small‐Scale Perturbations of the Carrier Phase on Properties of the System of Equations of a Two‐Fluid Flow with Incompressible Phases

The effect of the fluctuating components of kinetic energy and stress tensor of the carrier phase, which were previously obtained by the cell technique, on the properties of the system of equations of a gas–liquid flow with incompressible phases is considered. It is shown that the characteristic properties of this system and also the possibility of modeling the Zuber–Findlay empirical relation are determined by the tensor of fluctuating stresses of the carrier phase.     

“Thermal layer” effect in MHD: Interaction of a parallel shock with a layer of decreased density

Interaction of a parallel fast MHD shock with a layer of decreased density is discussed using ideal MHD approach. This is an extrapolation of gas dynamic thermal layer effect on ideal MHD. Computer simulations show that a magnetic field of a moderate intensity ( 1) may change the character of the flow for intermediate Mach numbers (M 5) and a new raking regime may occur which is not observed in the absence of a magnetic field. Self similar precursor analogous to that in gas dynamics may develop in the case of highM and low density in the layer but magnetic forces essentially decrease its growth rate. This problem appears in connection with cosmical shock propagation where planetary magnetic tails play the role of the thermal layer, and it may also be observed in the laboratory when the shock is strong enough to heat the walls ahead of it.This article was processed using Springer-Verlag T_EX Shock Waves macro package 1.0 and the AMS fonts, developed by the American Mathematical Society.     

High‐Velocity Penetration of Plane Shaped‐Charge Jets into Nonlinear Media

This paper reports results of metallographic analysis of metal samples cut from targets penetrated by plane shapedcharge jets. It is shown that the plastic deformation due to penetration has a turbulent nature and, in some cases, it occurs in metals with fractal structure formed after passage of the shock wave running ahead of the jet. A penetration model is proposed that takes into account the nonlinear behavior of the target material and the fractality of its structure.     

Effectiveness of Acidizing of the Vellbore Zone Taking into Account the Capillary Locking of Formation Water

The results of calculations of immiscible fluid flow to an operating well are compared for various formation parameters and states of the wellbore zone. Steadystate and unsteady filtration regimes are considered. The calculations show that acidizing of the wellbore zone increases the well flow rate.     

Impulsive Tension of Hexane and Glycerol under Shock‐Wave Loading

The strength of hexane and glycerol was measured under impulsive tension produced by interaction of a triangular compression pulse with a free surface. The tests were performed for strain rates of 10⁴–10⁵ sec^–1. It is established that the strength of hexane is equal to 14 MPa and does not depend on the strain rate, whereas the strength of glycerol increases from 57 to 142 MPa with an order of magnitude increase in the strain rate. The possibility of using the model of homogeneous nucleation to interpret the data obtained is discussed.     

Plane Problem of Vibrations of an Elastic Floating Plate under Periodic External Loading

The Wiener–Hopf technique is used to construct an analytical solution of the problem of vibrations of a semiinfinite elastic floating plate under periodic external loading. The solution is obtained in explicit form ignoring draft. The dependences of the amplitudes of surface waves and iceplate deflection on the loading distribution and frequency, ice thickness, and liquid depth are studied numerically. It is established that for some types of acting load, no waves propagate in the plate and liquid and the plate vibrations are standing waves localized near the loading region. An example of such vibrations is given and a condition for the occurrence of localized vibrations is found.     

Non-gaussian diffusion modeling in composite porous media by homogenization: Tail effect

In the paper anomalous diffusion appearing in a porous medium composed of two porous components of considerably different diffusion characteristics is examined. The differences in diffusivities are supposed to result either from two medium types being present or from variations in pore size (double porosity media). The long-tail effect is predicted using the homogenization approach based on the application of multiple scale asymptotic developments. It is shown that, if the ratio of effective diffusion coefficients of two porous media is of the order of magnitude smaller or equal O( ²), where is a homogenization parameter, then the macroscopic behaviour of the composite may be affected by the presence of tail-effect. The results of the theoretical analysis were applied to a problem of diffusion in a bilaminate composite. Analytical calculations were performed to show the presence of the long-tail effect in two particular cases.Notations c _i the concentration of chemical species in water within the medium i - D _i the effective diffusion coefficient for the medium i - D _ij ^eff the macroscopic (or effective) diffusion tensor in the composite - ERV the elementary representative volume - h the thickness of the period - l a chracteristic length of the ERV or the periodic cell - L a characteristic macroscopic length - n the volumetric fraction of the material 2 - 1–n the volumetric fraction of the material 1 - N the unit vector normal to - t the time variable - x the macroscopic (or slow) space variable - y the microscopic (or fast) space variable - c _1c ,C _2c ,D _1c ,D _2c the characteristic quantities - T,T _1L ,T _2L ,T _1l ,T _2l the characteristic times - c ₁ ^* ,c ₂ ^* ,D ₁ ^* ,D ₂ ^* ,t ^* the non-dimensional variables - the homogenization parameter - ₁ the domain occupied by the material 1 - ₂ the domain occupied by the material 2 - the interface between the domains 1 and 2 - the total volume of the periodic cell - /x_i the gradient operator - the gradient operator     

Velocity Measurements in a One‐Dimensional Steady Flow by Methods of Emission Tomography

A new method for velocityfield measurements in a onedimensional steady flow is proposed. The method is based on principles of laserinduced fluorescence combined with emission tomography. Results of a numerical experiment are presented.     

The modified Casson＇s equation and its application to pipe flows of shear-thickening fluid

A few additional data from our previous experiments were plotted to emphasize the shear-thickening behavior of deoxy sickle erythrocyte (SS) suspension. A constitutive equation (named as FX equation) was developed and applied to a cylindrical pipe flow of a shear-thickening fluid. A blunt velocity profile and its volume flow rate were calculated. The flow was non-viscous (potential) in the central part of the pipe (i.e. the central core or the central plug-flow), and became more and more viscous towards the wall of the pipe after a specific radial distance, which was determined by a critical shear rate of (named as Fungs shear rate). Furthermore, combining the FX equation with the original Cassons equation, the author obtained a modified Cassons equation by introducing .The English text was polished by Yunming Chen.     

RADAR ECHO DELAY IN THE(Ω,Aμν)-FIELD THEORY

The present work aims to consider the.fourth test of general relativity theory by Shapiro.using radar echo delay in Yu’s(Ω,A_μν)-field theory.     

Quasi-One-Dimensional Model of Heat and Mass Transfer During Sublimation of a Molecular Crystal Plate in a Plane Channel

An unsteady quasi-one-dimensional model is constructed for the process of sublimation of a monocrystalline plate of -diketonate in a uniform flow of an indifferent gas. A method of collocations and least squares is developed for solving heat-transfer problems. In contrast to the previous variants of the method, the algorithm proposed is designed for solving unsteady equations in partial derivatives with a phase transition. Numerical calculations are performed for various regimes of sublimation of chromium -diketonate; the results are in good agreement with the data of a physical experiment.     

Symbolic Sequences Generated by a Special Class of Discrete Systems With Discontinuity and Input

In this paper, we study the symbolic sequences generated by aclass of discrete systems. This class contains the double-modulators, a typical example of discretetime electronic systems with discontinuity and input. First we develop ageneral theory and then we apply it to some examples in order to obtainsets of inadmissible sequences.