PEG-linked geminal dicationic ionic liquids as selective, high-stability gas chromatographic stationary phases

It is known that room-temperature ionic liquids (RTILs) have wide applicability in many scientific and technological fields. In this work, a series of three new dicationic room-temperature ionic liquids functionalized with poly(ethylene glycol) (PEG) linkages were synthesized and characterized via a linear solvation model. The application of these ILs as new GC stationary phases was studied. The efficient separation of several mixtures containing compounds of different polarities and 24 components of a flavor and fragrance mixture indicated comparable or higher resolving power for the new IL stationary phases compared to the commercial polysiloxane and poly(ethylene glycol)-based stationary phases. In addition, the selectivities of the IL stationary phases could be quite unique. The separation of a homologous alkane and alcohol mixture displayed the “dual nature” of these ionic liquids as GC stationary phases. The thermal stability study showed the column robustness up to 350 °C. The high separation power, unique selectivity, high efficiency and high thermal stability of the new dicationic ionic liquids indicate that they may be applicable as a new type of robust GC stationary phase.     

Ionic liquids: solvents and sorbents in sample preparation

The applications of ionic liquids (ILs) and IL‐derived sorbents are rapidly expanding. By careful selection of the cation and anion components, the physicochemical properties of ILs can be altered to meet the requirements of specific applications. Reports of IL solvents possessing high selectivity for specific analytes are numerous and continue to motivate the development of new IL‐based sample preparation methods that are faster, more selective, and environmentally benign compared to conventional organic solvents. The advantages of ILs have also been exploited in solid/polymer formats in which ordinarily nonspecific sorbents are functionalized with IL moieties in order to impart selectivity for an analyte or analyte class. Furthermore, new ILs that incorporate a paramagnetic component into the IL structure, known as magnetic ionic liquids (MILs), have emerged as useful solvents for bioanalytical applications. In this rapidly changing field, this Review focuses on the applications of ILs and IL‐based sorbents in sample preparation with a special emphasis on liquid phase extraction techniques using ILs and MILs, IL‐based solid‐phase extraction, ILs in mass spectrometry, and biological applications.     

短孔道介孔分子筛Zr-Ce-SBA-15固载酸性离子液体催化合成双酚F

通过化学键接的方式,将酸性离子液体(ILs)分别负载于两种不同的硅基载体上,成功制备了SBA-15-ILs(SILs)与Zr-Ce-SBA-15-ILs(ZCSILs)等两种固载化酸性离子液体。 通过傅里叶变换红外光谱仪(FT-IR)、热重分析仪(TG-DTG)、X射线衍射仪(XRD)、N₂吸附-脱附比表面仪(BET)、透射电子显微镜(TEM)、扫描电子显微镜(SEM)与有机元素分析仪(OEA)等对所制备催化剂的物化性能进行了表征,并进一步研究了其在甲醛-苯酚合成二羟基二苯基甲烷(双酚F,BPF)中的催化活性。 结果表明:短孔道的ZCSILs具有较高比表面积、较多的离子液体负载量和相对优异的催化活性。 当m(催化剂)/m(甲醛)=0.36,n(苯酚)/n(甲醛)=30,反应时间90 min、反应温度90 ℃时,BPF收率可达95.6%,对4,4′-BPF的选择性达到44.8%,且所制备的ZCSILs重复使用5次后,依然显示优异的催化活性。     

Effect of ionic liquid additives to mobile phase on separation and system efficiency for HPLC of selected alkaloids on different stationary phases

The silica-based stationary phases with favorable physical characteristics are the most popular in liquid chromatography. However, there are several problems with silica-based materials: severe peak tailing in the chromatography of basic compounds, non-reproducibility for the same chemistry columns, and limited pH stability. Ionic liquids (ILs) as mobile phase components can reduce peak tailing by masking residual free silanol groups. The chromatographic behavior of some alkaloids from different classes was studied on C18, phenyl, and pentafluorophenyl columns with different kinds and concentrations of ionic liquids as additives to aqueous mobile phases. Ionic liquids with different alkyl substituents on different cations or with different counterions as eluent additives were investigated. The addition of ionic liquids has great effects on the separation of alkaloids: decrease in band tailing, increase in system efficiency, and improved resolution. The retention, separation selectivity, and sequence of alkaloid elution were different when using eluents containing various ILs. The increase of IL concentration caused an increase in silanol blocking, thus conducted to decrease the interaction between alkaloid cations and free silanol groups, and caused a decrease of alkaloids retention, improvement of peak symmetry, and increase of theoretical plate number in most cases. The effect of ILs on stationary phases with different properties was also examined. The different properties of stationary phases resulted in differences in analyte retention, separation selectivity, peak shape, and system efficiency. The best shape of peaks and the highest theoretical plate number for most investigated alkaloids in mobile phases containing IL was obtained on pentafluorophenyl (PFP) phase.     

Ionogels, ionic liquid based hybrid materials

The current interest in ionic liquids (ILs) is motivated by some unique properties, such as negligible vapour pressure, thermal stability and non-flammability, combined with high ionic conductivity and wide electrochemical stability window. However, for material applications, there is a challenging need for immobilizing ILs in solid devices, while keeping their specific properties. In this critical review, ionogels are presented as a new class of hybrid materials, in which the properties of the IL are hybridized with those of another component, which may be organic (low molecular weight gelator, (bio)polymer), inorganic (e.g. carbon nanotubes, silica etc.) or hybrid organic-inorganic (e.g. polymer and inorganic fillers). Actually, ILs act as structuring media during the formation of inorganic ionogels, their intrinsic organization and physicochemical properties influencing the building of the solid host network. Conversely, some effects of confinement can modify some properties of the guest IL, even though liquid-like dynamics and ion mobility are preserved. Ionogels, which keep the main properties of ILs except outflow, while allowing easy shaping, considerably enlarge the array of applications of ILs. Thus, they form a promising family of solid electrolyte membranes, which gives access to all-solid devices, a topical industrial challenge in domains such as lithium batteries, fuel cells and dye-sensitized solar cells. Replacing conventional media, organic solvents in lithium batteries or water in proton-exchange-membrane fuel cells (PEMFC), by low-vapour-pressure and non flammable ILs presents major advantages such as improved safety and a higher operating temperature range. Implementation of ILs in separation techniques, where they benefit from huge advantages as well, relies again on the development of supported IL membranes such as ionogels. Moreover, functionalization of ionogels can be achieved both by incorporation of organic functions in the solid matrix, and by encapsulation of molecular species (from metal complexes to enzymes) in the immobilized IL phase, which opens new routes for designing advanced materials, especially (bio)catalytic membranes, sensors and drug release systems (194 references).     

Characterization of hexacationic imidazolium ionic liquids as effective and highly stable gas chromatography stationary phases

Polycationic ionic liquids (ILs) are an attractive class of ILs with great potential applicability as gas chromatography stationary phases. A family of hexacationic imidazolium ILs derived from the cycloalkanol family was chemically first prepared in a straightforward manner and then applied for analytical separation purposes. Four tuneable engineering vectors, namely cation ring size structure, anion nature, spatial disposition of cycloalkanol substituents and O‐substitution, were considered as experimental parameters for the design of the desired ionic liquids. A total number of five new phases based on a common benzene core respectively exhibited column efficiencies around to 2500 plates/m, broad operating temperature ranges and also, even more importantly, good thermal stabilities (bleeding temperature between 260 and 365°C), finding variations in the selectivity and analytes elution orders depending on the IL structures. Their solvation characteristics were evaluated using the Abraham solvation parameter model, establishing clear correlations between their cation structure and retention capability with respect to certain analytes. The study of relationships between the ILs structure and solvation parameters gives us an idea of the IL stationary phase to be used for specific separations.     

The preparation of sol-gel materials doped with ionic liquids and trialkyl phosphine oxides for yttrium(III) uptake

A new material (IL923SGs) composed of ionic liquids and trialkyl phosphine oxides (Cyanex 923) for Y(III) uptake was prepared via a sol-gel method. The hydrophobic ionic liquid 1-octyl-3-methylimidazolium hexafluorophosphate (C₈mim⁺PF₆⁻) was used as solvent medium and pore templating material. The extraction of Y(III) by IL923SGs was mainly due to the complexation of metal ions with Cyanex 923 doped in the solid silica. Ionic liquid was stably doped into the silica gel matrix providing a diffusion medium for Cyanex 923, and this will result in higher removal efficiencies and excellent stability for metal ions separation. IL923SGs were also easily regenerated and reused in the subsequent removal of Y(III) in four cycles.     

离子液体在CO_2捕集中的应用进展

离子液体具有蒸汽压极低、热稳定性好、热容低和可以根据目标需求进行设计等特性,能克服传统CO2捕集工艺的诸多不足,因而成为目前CO2捕集溶剂的研究热点。本文主要综述了普通离子液体、功能化离子液体、支撑型离子液体膜、聚合型离子液体和离子液体复配溶液在CO2捕集方面的应用研究进展,评述了各种方法的优势和缺点,并在此基础上提出...     

Evaluation of new ionic liquids as high stability selective stationary phases in gas chromatography

Two ionic liquids (ILs), namely (S,S)-1-butyl-3-(2'-hydroxy-cyclohexyl)-3H-imidazol-1-ium tetrafluoroborate and (S,S)-1-butyl-3-(2'-acetyl-cyclohexyl)-3H-imidazol-1-ium tetrafluoroborate have been employed as stationary phases in capillary gas chromatography. These new phases exhibit a column efficiency of 1,600 and 2,100 plates m(-1) for IL 1 and IL 2, respectively, a wide operating temperature range and good thermal stability (bleeding temperature of 250 °C for IL 1 and 160 °C for IL 2). Inverse gas chromatography (GC) analyses were used to study the solvation properties of these ILs through a linear solvation energy model. The application of these ILs as new GC stationary phases was studied. These stationary phases exhibited unique selectivity for many organic substances, such as alkanes, ketones, esters, and aromatic compounds. The efficient separation of several mixtures containing compounds of different polarities and the good separation of fatty acid methyl esters (FAMEs) and cis/trans isomers indicate that these ILs may be applicable as a new type of GC stationary phases.     

Anion-selective electrodes based on ionic liquid membranes: effect of ionic liquid anion on observed response

A systematic study of the behavior of ion-exchanger anion-selective electrodes prepared from seven different trihexyltetradecylphosphonium ionic liquids (ILs) was performed. The effective ion-exchange capacity of prepared ion-selective electrodes (ISEs) increased with decreasing IL anion lipophilicity, and analyte anion response slopes became more Nernstian concomitantly. With ILs having the most lipophilic constituent anions, incorporation of tridodecylmethylammonium chloride into membranes significantly enhanced responses toward all ions. However, ILs based on bis(trifluoromethylsulfonyl)imide and dodecylsulfate maintained sub-Nernstian responses upon such addition apparently due to their ability to coordinate cations. Electrodes prepared with high IL content displayed regions of super-Nernstian response, which could be eliminated by reducing percent of IL in the membrane; percentages at which optimal linear range was achieved also followed a trend with decreasing constituent IL anion lipophilicity. While selectivities of all electrodes followed the Hofmeister pattern, selectivity coefficient ranges generally were narrower than observed with traditionally plasticized ISEs, and selectivities for more hydrophilic analytes were improved slightly in ILs containing the most hydrophilic constituent anions.     

Cation electrochemical stability in chloroaluminate ionic liquids

The electrochemical stability of 10 organic cations, which can be used in ionic liquids (IL), was investigated as solutes in acetonitrile (ACN). The stability of three of the salts, BenMe2EtNCl (salt III), 1-butyl-2-methyl pyrrolidium chloride (salt VI), and its structural isomer, BuMe2ProNCl (salt VII), were also compared in chloroaluminate ILs. The chloroaluminate ILs of salts VI and VII are investigated for the first time. The NaCl-neutralized ILs of salts VI and VII have melting points of 43.2 and 3.7 degrees C, respectively. The benzyl-substituted cation, salt III, was more easily reduced in ACN or as the neutral chloroaluminate IL than the alkyl-substituted cation, salt VII, due to the better leaving ability of the benzyl group. Mass spectroscopy measurements before and after electrolysis on the benzyl-substituted solutions confirmed that reduction involves the loss of an alkyl group. In ACN, salt VI was found to be the most difficult to reduce (1 mA/cm2 at -2.09 V) due to its cyclic structure. However, in the chloroaluminate IL, the pyrrolidinium cation was more easily reduced than salt III or its isomer, salt VII, resulting in an insoluble black deposit. This is consistent with the mass spectrometry data, which do not show formation of low-molecular-weight products, as in the reduction of salts III and VII. The IL of salt VII was the most stable in the presence of sodium. Sodium ions could be reduced and reoxidized with a maximum Coulombic efficiency of 94.1% versus 87.2% for salt VI. Reduction of the pyrrolidinium cation produces insoluble products, most likely through opening of the cyclic ring, and an inferior medium for sodium ion reduction compared to the benzyl- and butyl-substituted cations, even though reduction of the cation occurs at a more negative potential in acetonitrile.     

Retention characteristics of organic compounds on molten salt and ionic liquid-based gas chromatography stationary phases

The interest of using ionic liquids (ILs) as stationary phases in gas chromatography (GC) has increased in recent years. This is largely due to the fact that new classes of ILs are being developed that are capable of satisfying many of the requirements of GC stationary phases. This review highlights the major requirements of GC stationary phases and describes how molten salts/ILs can be designed to largely meet these needs. The retention characteristics of organic solutes will be discussed for ammonium, pyridinium, and phosphonium-based molten salts followed by imidazolium, pyridinium, pyrollidinium, and phosphonium-based IL stationary phases. The versatility of ILs allows for the development of stationary phases based on dicationic ILs, polymeric ILs, and IL mixtures. To aid in choosing the appropriate IL stationary phase for a particular separation, the reader is guided through the different types of stationary phases available to identify those capable of providing the desired separation selectivity of organic solutes while allowing for flexibility in ranges of temperature used throughout the separation.     

Ethylene glycol‐based ionic liquids via azide/alkyne click chemistry

A facile synthetic route for the preparation of dicationic ethylene glycol based‐ionic liquids (ILs) via the azide/alkyne “click” reaction is presented. The copper(I) catalyzed, microwave‐assisted azide/alkyne “click” reaction between diazido‐ethylene glycols and the corresponding alkyne containing IL‐head group enables a simple preparation of different sets of poly(ethylene glycol)‐based ILs. Beside tetra‐ and hexa(ethylene glycol)‐based ILs, also oligomeric (M_n = 400 g/mol) and polymeric ILs (M_n up to 1550 g/mol) could be prepared in good yield and with full conversion of the ionic head group. The prepared ILs were extensively characterized via NMR spectroscopy and ESI‐time‐of‐flight (TOF) mass spectroscopy, revealing the formation of multiply charged ions in the negative mode. Thermal stability proved to be exceptionally high (up to 300 °C) together with low glass‐transition temperatures. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Syntheses and characterization of few bio-ionic liquids comprising of cholinium cation and plant derived carboxylic acids as anions

Due to the increasing trend to use ionic liquids (ILs) for number of applications, it is of utmost importance to ensure non toxicity of the solvent systems which may contaminate the processed products. The reported toxicity of several imidazolium based ionic liquids posed a need to develop bio based ILs for various applications which are due to their bio-origin are bio compatible, nontoxic and biodegradable. Herein eleven bio-based ionic liquids were prepared using acid moieties available in various plants and characterized. Although some of the ILs were used to separate antibodies such as IgG from rat serum in the form of aqueous biphasic systems but to find their direct application for material preparation and food applications, herein rheological behavior of the ILs were investigated. The choline based IL containing coumarine-3-carboxylate was found to have highest zero shear viscosity while the IL with D-(−)-quinate was found to have the lowest. The viscoelastic behavior of the ionic liquids established anion dependent viscous and liquid like behavior of the ionic liquids. Interestingly the ILs showed viscosity independent ion conductivity. Due to the high conductivity, stable physical state and bio-origin such ILs have the potential for applications in electrochemistry, food and material science.     

Chromium speciation,selective extraction and preconcentration by alumina-functionalised 2-pyridenecarboxyladehyde thiosemicarbazone

A method is proposed and explored for speciation of Cr(III) and Cr(VI), selective extraction and preconcentration in various water samples based on dynamic and static techniques. Three newly designed alumina phases-physically adsorbed-2-pyridenecarboxyladehyde-thiosemicarbazone [Al-2PC-TSC (I–III)] were synthesised and characterised. Stability tests and application of [Al-2PC-TSC (I–III)] as inorganic ion exchangers and chelating solid sorbents for various metal ions were studied and evaluated. The distribution coefficient and separation factors of chromium species versus other interfering metal ions were determined to examine the incorporated selectivity into these alumina phases. Quantitative recovery of Cr(VI) was accomplished by [Al-2PC-TSC (I–III)] at pH = 1.0 while Cr(III) was found to be quantitatively recovered on these sorbents at pH = 7.0 with minimal or no interference between these two species under the studied buffering conditions. Selective solid phase speciation and preconcentration of Cr(III) and Cr(VI) in various real water samples were successfully performed and accomplished via a micro-column, with 200 as a preconcentration factor. Selective speciation of Cr(VI) and Cr(III) via preconcentration from seawater and industrial water samples by alumina phases in pH = 1 was found to give percentage recovery values of Cr(VI) in the range 93.5–97.3 ± 3.0–5.0% and 94.0–97.5 ± 3.0–4.0%, for seawater and industrial water samples, respectively.     

New Water‐Stable Ionic Liquids Based on Tetrakis‐(2,2,2‐trifluoroethoxy)borate

Several new ionic liquids (ILs) were prepared from Na[B(tfe)4] (tfe=OCH₂CF₃) via metathesis, including one room temperature IL (RTIL). Prior to synthesis, suitable cations were chosen via predictive quantum‐chemical calculations. Nuclear magnetic resonance monitoring over almost a month showed a total stability of the anion in the presence of water. The temperature‐dependent viscosities and melting points of all the new ILs were determined. The data indicate that [B(tfe)₄]^? ILs may be too viscous for electrochemical applications, but are interesting candidates for lubricant research.     

新型PEG双子温控离子液体中的缩醛反应

制备了具备温控功能的新型PEG双子离子液体(IL200, IL400, IL1000), 考察了该离子液体和甲苯形成“高温均相, 低温两相”体系, 对芳香醛与乙二醇缩合反应的影响, 当离子液体3 mL, 甲苯5 mL, 对甲苯磺酸6 mmol, 苯甲醛5 mmol, 乙二醇15 mmol, 反应时间4 h, 温度80 ℃时, 产率达到92%. 该体系对芳香醛与乙二醇缩合反应有广泛的适用性, 且不经任何处理可多次循环使用.     

含膦和含氮配体功能化离子液体中 RuCl3•3H2O 催化分子氧氧化醇

 无共氧化剂参与条件下, 以氧气为氧化剂, 在含膦或含氮配体功能化离子液体和普通离子液体 (溶剂) 组成的混合体系中, RuCl3•3H2O 能有效催化多种醇的选择氧化, 高选择性地生成相应的醛或酮. 其中, 配位能力较弱的含氮配体功能化离子液体更有利于提高钌催化剂的活性和选择性, 但体系无法有效实现钌催化剂的循环使用. 配体功能化离子液体本身的氧化降解是导致钌催化剂失活的根本原因.     

Ionic Liquids Can Permanently Modify Porous Silicon Surface Chemistry

To develop ionic liquid/porous silicon (IL/pSi) microarrays we have contact pin‐printed 20 hydrophobic and hydrophilic ionic liquids onto as‐prepared, hydrogen‐passivated porous silicon (ap‐pSi) and then determined the individual IL spot size, shape and associated pSi surface chemistry. The results reveal that the hydrophobic ionic liquids oxidize the ap‐pSi slightly. In contrast, the hydrophilic ionic liquids lead to heavily oxidized pSi (i.e., ox‐pSi). The strong oxidation arises from residual water within the hydrophilic ILs that is delivered from these ILs into the ap‐pSi matrix causing oxidation. This phenomenon is less of an issue in the hydrophobic ILs because their water solubility is substantially lower.     

CO2/离子液体体系热力学性质的分子动力学模拟

超临界CO2和离子液体(ILs)是两种绿色溶剂. 离子液体可以溶解超临界CO2, 而超临界CO2不能溶解离子液体. 由此设计构成的CO2/IL二元系统, 同时具备了超临界CO2和离子液体的许多优点: 既可以降低离子液体的粘度, 还便于相分离, 是新型的耦合绿色溶剂. 其物理化学性质对于设计反应、分离等过程非常重要. 因此, 本文以CO2/IL二元系统为研究对象, 通过选择合适的分子力场和系综, 运用分子动力学(MD)模拟方法研究了CO2/[bmim][PF6]、CO2/[bmim][NO3]等体系的热力学性质. 结果表明, CO2对ILs膨胀度的影响非常小, 当CO2摩尔分数为0.5时, ILs膨胀仅为15%. CO2/ILs的扩散系数远小于CO2膨胀甲醇、乙醇溶液的扩散系数. 随着CO2含量的增加, ILs的扩散系数提高, 粘度显著下降, 表明CO2能有效地改善ILs扩散性, 减小其粘度. 因此CO2可用以改善离子液体溶剂体系的传递特性, 增强反应分离过程在其中的进行.