Synthesis and miscibility studies of [60]fullerenated poly(2‐hydroxyethyl methacrylate)

[60]Fullerenated poly(2‐hydroxyethyl methacrylate)s containing 0.6–3.0 wt % C₆₀ were synthesized. These polymers are soluble in methanol and N,N‐dimethylformamide (DMF). [60]Fullerenated poly(2‐hydroxyethyl methacrylate)s with higher C₆₀ contents are only sparingly soluble in DMF and virtually insoluble in other organic solvents. A loading of 1.2 wt % C₆₀ in poly(2‐hydroxyethyl methacrylate) does not greatly affect its miscibility with poly(N‐vinyl‐2‐pyrrolidone), poly(1‐vinylimidazole), and poly(4‐vinylpyridine). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1157–1166, 2002     

Ultratrace analysis of uracil and 5‐fluorouracil by molecularly imprinted polymer brushes grafted to silylated solid‐phase microextraction fiber in combination with complementary molecularly imprinted polymer‐based sensor

Main inborn errors of metabolism diagnosable through uracil (Ura) analysis and the therapeutic monitoring of toxic 5‐fluorouracil (5FU) in dihydro pyrimidine dehydrogenase (DPD) deficient patients require a sensitive, reproducible, selective and accurate method. In this work, an artificial receptor in the format of molecularly imprinted polymer (MIP) brush ‘grafted to’ the surface of sol–gel immobilized on cost‐effective homemade solid‐phase microextraction (SPME) fibers, individually imprinted with either of Ura and 5FU, was used in combination with a voltammetric sensor duly modified with the same MIP. This combination provided up to 10‐ and 8.4‐fold preconcentrations of Ura and 5FU, respectively, which was more than sufficient for achieving stringent detection limits in the primitive diagnosis of uracil disorders and fluoropyrimidine toxicity in DPD‐deficient patients. The proposed method permits the assessment of Ura and 5FU plasma concentrations with detection limits pf 0.0245 and 0.0484 ng mL^?1 (RSD = 1.0–2.5%, S/N = 3), respectively, without any problems of non‐specific false‐positives and cross‐reactivities in complicated matrices of biological samples. Copyright © 2008 John Wiley & Sons, Ltd.     

Preparation of amphiphilic statistical copolymers of 2‐hydroxyethyl methacrylate with 2‐diethylaminoethyl methacrylate,precursors of water‐soluble copolymers

Statistical copolymers of 2‐hydroxyethyl methacrylate (HEMA) and 2‐diethylaminoethyl methacrylate (DEA) were synthesized at 50 °C by free‐radical copolymerization in bulk and in a 3 mol L^?1 N,N′‐dimethylformamide solution with 2,2′‐azobisisobutyronitrile as an initiator. The solvent effect on the apparent monomer reactivity ratios was attributed to the different aggregation states of HEMA monomer in the different solvents. The copolymers obtained were water‐insoluble at a neutral pH but soluble in an acidic medium when the molar fraction of the DEA content was higher than 0.5. The quaternization of DEA residues increased the hydrophilic character of the copolymers, and they became water‐soluble at a neutral pH when the HEMA content was lower than 0.25. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2427–2434, 2002     

Thermosensitive molecularly imprinted poly(1‐vinyl‐2‐pyrrolidone/methyl methacrylate/N‐vinylcaprolactam) for selective extraction of imatinib mesylate in human biological fluid

The efficiency of a molecularly imprinted polymer as a selective packing material for the solid‐phase extraction of imatinib mesylate sorption was investigated. The molecularly imprinted polymer was prepared using N,N′‐methylenebisacrylamide as a cross‐linker agent, N‐vinylcaprolactam as a thermo‐sensitive monomer, 1‐vinyl‐2‐pyrrolidone and methyl methacrylate as functional monomers, azobisisobutyronitrile as an initiator and imatinib mesylate as a template. The drug‐imprinted polymer was identified by Fourier transform infrared spectroscopy, thermogravimetric analysis, elemental analysis, and scanning electron microscopy. It was found that this polymer can be used for determination of trace levels of imatinib mesylate with a recovery percentage that could reach over 90%. Furthermore, the synthesized molecularly imprinted polymer indicated higher selectivity towards imatinib mesylate than other compounds. From isotherm study, the equilibrium adsorption data of imatinib mesylate by imprinted polymer were analyzed by Langmuir, Freundlich, and Temkin isotherm models. The developed method was used for determination of imatinib mesylate in human fluid samples by high performance liquid chromatography with excellent results.     

Hydrophilic nanocomposites based on polyurethane/poly(2‐hydroxyethyl methacrylate) semi‐IPNs and modified/unmodified nanosilica for biomedical applications

Nanocomposites based on sequential semi‐interpenetrating polymer network (semi‐IPN) of cross‐linked polyurethane and linear poly(2‐hydroxyethyl methacrylate) with 0.25 and 3 wt % of nanosilica filler were prepared and investigated. The unmodified silica, carboxyl‐modified, and amino‐modified silica were used in an attempt to control the microphase separation of the polymer matrix by polymer–filler interactions. A variety of experimental techniques were used to study morphology, thermal transitions, mechanical properties, and polymer dynamics of the nanocomposites. Special attention was paid to the investigation of the hydration properties of the nanocomposites in the perspective of biomedical applications. The results show that the good hydration properties of the semi‐IPN matrix are preserved in the nanocomposites. Effects of water on polymer dynamics were found to be particularly pronounced for the secondary β_sw,_PHEMA and the β_PU relaxations, in agreement with interpretations in terms of hydrogen bonding interactions with specific groups in the structure of the two polymers. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 397–408     

Precipitation polymerization of 2‐hydroxyethyl methacrylate in supercritical carbon dioxide

We report the successful precipitation polymerization of 2‐hydroxyethyl methacrylate (HEMA) in supercritical carbon dioxide (scCO₂) at pressures ranging from 15 to 27 MPa utilizing 2, 2′‐azobisisobutyronitrile (AIBN) as a free radical initiator. The effects of the reaction pressure, initiator concentration, monomer concentration, reaction temperature, and reaction time were investigated. Analyses by scanning electron microscopy (SEM) indicated that in all reaction conditions, polymerization in the absence of stabilizer led to the formation of large aggregates of partially coalesced particles, with diameters of approximate 1–10 µm. Analyses by gel permeation chromatography (GPC) indicated that for the reaction pressure, initiator concentration, monomer concentration, reaction temperature, and reaction time studied there are appreciable effect on product molecular weight. Copyright © 2011 John Wiley & Sons, Ltd.     

Radiation synthesis and uranyl‐ion adsorption of poly(2‐hydroxyethyl methacrylate/maleic acid) hydrogels

A new kind of copolymeric hydrogel adsorbent containing hydrophilic groups that both provides swelling in water and chelates with uranyl ions was synthesized, and its adsorptive ability for recovering uranium from aqueous media was investigated. The uranyl adsorption capacities of poly(2‐hydroxyethyl methacrylate/maleic acid) hydrogels were determined with a polarographic technique to be 3.2–4.8 (mg UO/g dry gel) from a 15‐ppm uranyl nitrate solution at pH, 6 depending on the molar content of maleic acid in the hydrogel. Adsorption studies showed that other stimuli, the temperature, and the ionic strength of the solution also have important roles in the uranyl‐ion adsorption capacity of these hydrogels. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 277–283, 2001     

Hydrogen bonding and hydrophobic interactions between [60]fullerenated poly(2‐hydroxyethyl methacrylate) and poly(1‐vinylimidazole) or poly(4‐vinylpyridine)

Miscible blends of poly(2‐hydroxyethyl methacrylate) (PHEMA) and poly(1‐vinylimidazole) (PVI) have been formed in methanol/water (3/2 v/v) solutions. The incorporation of 0.6 wt % C₆₀ into PHEMA leads to hydrophobic interactions and enhanced hydrogen bonding in miscible blends of [60]fullerenated poly(2‐hydroxyethyl methacrylate) (FPHEMA) with PVI. The incorporation of 2.6 wt % C₆₀ into PHEMA increases its tendency to form interpolymer complexes with PVI. Interpolymer complexes are formed when FPHEMA samples containing 0.6, 1.4, and 2.6 wt % C₆₀ are blended with poly(4‐vinylpyridine). The yields of the complexes increase with increasing C₆₀ content in FPHEMA. Calorimetry and Fourier transform infrared spectroscopy studies suggest the importance of hydrophobic interactions in C₆₀‐containing blends and complexes. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4316–4327, 2002     

Construction of a TiO2–Fe3O4‐decorated molecularly imprinted polymer nanocomposite for tartrazine degradation: Response surface methodology modeling and optimization

We synthesized a novel recoverable and reusable photocatalyst system for tartrazine degradation by one‐step incorporation of Fe₃O₄ and TiO₂ nanoparticles into a molecularly imprinted polymer through a facile precipitation polymerization method. The as‐prepared samples were systematically characterized using X‐ray diffraction, infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, energy‐dispersive spectroscopy, and vibrating sample magnetometry. Benefiting from the positive synergistic effect, tartrazine was almost completely degraded under UV‐C within 180 min by the multicomponent photocatalyst (Fe₃O₄ + TiO₂ + MIP) in comparison with far fewer activities by the corresponding NIP system and the nonmagnetic and bare structures. On the other hand, the central composite design in response surface methodology was applied to optimize the tartrazine photocatalytic degradation process. Twenty experiments were conducted by adjusting three parameters (nanocomposite dosage, initial pH of the reaction solution, and initial dye concentration) in the multiple variable analysis method. A satisfactory correlation between the experimental and predicted values was obtained (R² = 0.956). Additionally, ANOVA analysis with a p value of 1.15 × 10^–5 indicated that the model terms are highly significant. Under the determined optimum conditions, a verification experiment was conducted and shown the adequately approximate value between the predicted (99%) and the experimental (97%) results, which confirmed the validity of the model.     

Magnetic poly(2‐hydroxyethyl methacrylate‐co‐ethylene dimethacrylate) microspheres by dispersion polymerization

Crosslinked poly(2‐hydroxyethyl methacrylate)‐based magnetic microspheres were prepared in a simple one‐step procedure by dispersion polymerization in the presence of several kinds of iron oxides. Cellulose acetate butyrate and dibenzoyl peroxide were used as steric stabilizer and polymerization initiator, respectively, and ethylene dimethacrylate was a crosslinking agent. The resulting product was characterized in terms of particle size, particle size distribution, iron(III) content, and magnetic properties. In the presence of needle‐like maghemite in the polymerization mixture and under suitable conditions, magnetic microspheres with relatively narrow size distribution were formed. An increase in the particle size and, at the same time, a decrease in molecular weight of uncrosslinked polymers resulted, as the continuous phase became richer in 2‐methylpropan‐1‐ol. Coercive force of needle‐like maghemite‐containing particles was higher than that of cubic magnetite‐loaded microspheres. Coercive force increased with the decreasing iron content in the particles. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1161–1171, 2000     

A (−)‐norephedrine‐based molecularly imprinted polymer for the solid‐phase extraction of psychoactive phenylpropylamino alkaloids from Khat (Catha edulis Vahl. Endl.) chewing leaves

A molecularly imprinted polymer (MIP) was prepared using (?)‐norephedrine as the template, methacrylic acid as the functional monomer, ethylene glycol dimethacrylate as the cross‐linker and chloroform as the porogen. The MIP was used as a selective sorbent in the molecularly imprinted solid‐phase extraction (MIP‐SPE) of the psychoactive phenylpropylamino alkaloids, norephedrine and its analogs, cathinone and cathine, from Khat (Catha edulis Vahl. Endl.) leaf extracts prior to HPLC‐DAD analysis. The MIP was able to selectively extract the alkaloids from the aqueous extracts of Khat. Loading, washing and elution of the alkaloids bound to the MIP were evaluated under different conditions. The clean baseline of the Khat extract obtained after MIP‐SPE confirmed that a selective and efficient sample clean‐up was achieved. Good recoveries (90.0–107%) and precision (RSDs 2.3–3.2%) were obtained in the validation of the MIP‐SPE‐HPLC procedure. The content of the three alkaloids in Khat samples determined after treatment with MIP‐SPE and a commercial Isolute C₁₈ (EC) SPE cartridge were in good agreement. These findings indicate that MIP‐SPE is a reliable method that can be used for sample pre‐treatment for the determination of Khat alkaloids in plant extracts or similar matrices and could be applicable in pharmaceutical, forensic and biomedical laboratories. Copyright © 2015 John Wiley & Sons, Ltd.     

Negative‐working photoresist of methacrylate polymers based on the transesterification of the 2‐hydroxyethyl group in the presence of an acid

This article reports a novel crosslinking functionality of the 2‐hydroxyethyl methacrylate unit (HEMA) in the presence of an acid. The polymeric compositions, consisting of a polymer containing the HEMA unit and a photoacid generator, were insolubilized in an aqueous base developer on exposure to UV light and a successive baking process to provide a negative‐working photoresist. A series of poly(benzyl methacrylate‐co‐methacrylic acid‐co‐2‐hydroxyethyl methacrylate) terpolymers with various contents of HEMA were prepared to elucidate the photopolymeric characteristics. The polymer behavior in films was examined by a comparison of the photosensitivity and IR spectroscopic method. Experiments with a model compound were also carried out. On the basis of the results, we found that the resist was insolubilized by crosslinking through the transesterification of HEMA segments due to acid generated from the photoacid generator and subsequent heating. The advantage of using the 2‐hydroxyethyl group is that in the terpolymer, the HEMA unit is transparent at a short‐wavelength region and is a promising crosslinking unit for ArF lithographic photoresists. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1858–1867, 2002     

RGDS‐ and SIKVAVS‐Modified Superporous Poly(2‐hydroxyethyl methacrylate) Scaffolds for Tissue Engineering Applications

Three‐dimensional hydrogel supports for mesenchymal and neural stem cells (NSCs) are promising materials for tissue engineering applications such as spinal cord repair. This study involves the preparation and characterization of superporous scaffolds based on a copolymer of 2‐hydroxyethyl and 2‐aminoethyl methacrylate (HEMA and AEMA) crosslinked with ethylene dimethacrylate. Ammonium oxalate is chosen as a suitable porogen because it consists of needle‐like crystals, allowing their parallel arrangement in the polymerization mold. The amino group of AEMA is used to immobilize RGDS and SIKVAVS peptide sequences with an N‐γ‐maleimidobutyryloxy succinimide ester linker. The amount of the peptide on the scaffold is determined using ¹²⁵I radiolabeled SIKVAVS. Both RGDS‐ and SIKVAVS‐modified poly(2‐hydroxyethyl methacrylate) scaffolds serve as supports for culturing human mesenchymal stem cells (MSCs) and human fetal NSCs. The RGDS sequence is found to be better for MSC and NSC proliferation and growth than SIKVAVS.

     

Cross‐Linking and Degradation Properties of Plasma Enhanced Chemical Vapor Deposited Poly(2‐hydroxyethyl methacrylate)

Plasma Enhanced Chemical Vapor Deposition (PECVD) of poly‐2‐hydroxyethyl methacrylate (pHEMA) biocompatible, biodegradable polymer films were produced alone and cross‐linked with ethylene glycol diacrylate (EGDA). Degree of cross‐linking was controlled via manipulation of the EGDA flow rate, which influenced the amount of swelling and the extent of degradation of the films in an aqueous solution over time. Noncross‐linked pHEMA films swelled 10% more than cross‐linked films after 24 h of incubation in an aqueous environment. Increasing degree of film cross‐linking decreased degradation over time. Thus, PECVD pHEMA films with variable cross‐linking properties enable tuning of gel formation and degradation properties, making these films useful in a variety of biologically significant applications.

     

Synthesis and characterization of well‐defined poly(2‐hydroxyethyl methacrylate‐co‐styrene)‐graft‐poly(ε‐caprolactone) by sequential controlled polymerization

A new graft copolymer, poly(2‐hydroxyethyl methacrylate‐co‐styrene) ‐graft‐poly(?‐caprolactone), was prepared by combination of reversible addition‐fragmentation chain transfer polymerization (RAFT) with coordination‐insertion ring‐opening polymerization (ROP). The copolymerization of styrene (St) and 2‐hydroxyethyl methacrylate (HEMA) was carried out at 60 °C in the presence of 2‐phenylprop‐2‐yl dithiobenzoate (PPDTB) using AIBN as initiator. The molecular weight of poly (2‐hydroxyethyl methacrylate‐co‐styrene) [poly(HEMA‐co‐St)] increased with the monomer conversion, and the molecular weight distribution was in the range of 1.09 ～ 1.39. The ring‐opening polymerization (ROP) of ?‐caprolactone was then initiated by the hydroxyl groups of the poly(HEMA‐co‐St) precursors in the presence of stannous octoate (Sn(Oct)₂). GPC and ¹H‐NMR data demonstrated the polymerization courses are under control, and nearly all hydroxyl groups took part in the initiation. The efficiency of grafting was very high. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5523–5529, 2004     

Synthesis of Poly(2‐Hydroxyethyl Methacrylate)‐based Hybrid Nanoparticles via Visible‐Light‐Initiated Radical Polymerization

We report a new, unique process for the design of poly(2‐hydroxyethyl methacrylate) (PHEMA )‐based hybrid materials, which involves the coating of PHEMA on TiO₂ and TiO₂ /Ag nanoparticle surface under visible light. New hybrid materials initiated under different conditions were prepared under visible light, which could be used for the theoretical design of nanohybrid materials. The hybrid materials thus prepared were characterized by Fourier transform infrared spectroscopy (FTIR ), transmission electron microscopy (TEM ), and thermogravimetric analysis (TGA ). The experimental results confirmed the successful synthesis of TiO₂–PHEMA hybrid materials. Compared to other methods, the method reported here involving the direct combination of PHEMA on the TiO₂ surface was simply catalyzed by visible light without the addition of initiators.     

Water transport in 2‐hydroxyethyl methacrylate copolymer irradiated by γ rays in air and related phenomena

The water transport in 2‐hydroxyethyl methacrylate copolymer (HEMA copolymer) irradiated by γ rays in air is investigated. The sorption data of deionized water transport in HEMA copolymer subjected to various dosages of γ‐ray irradiation are in excellent agreement with the theoretical model that accounts for case I, case II, and anomalous transport. The diffusion coefficient for case I and the velocity for case II satisfy the Arrhenius equation for all dosage levels. The transport process is exothermic and the equilibrium–swelling ratio satisfies the van't Hoff plot. The studies of the glass transition temperature of the irradiated HEMA copolymer, the pH value of deionized water after irradiation treatment, and the quantitative determination of water structures in the HEMA copolymer hydrogel are helpful in analyzing the irradiation effect on water transport in the HEMA copolymer. The effect of irradiation on the optical properties of the HEMA copolymer is also analyzed. The transmittance of a standard specimen with saturated water is lower than that before the water treatment because of the creation of holes. However, because of the formation of color centers, the color of the copolymer becomes yellow to brown and the UV cutoff wavelength of the HEMA copolymer shifts to the longer wavelength side with increasing irradiation dosage. Some of the color centers can be annihilated after water treatment. The buckled pattern on the outer surface is observed when the HEMA copolymer irradiated by a γ ray in air is immersed in the water. This phenomenon is explained by the inhomogeneous distribution of crosslinking density. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 659–671, 2000     

Preparation of magnetic molecularly imprinted polymer nanoparticles by surface imprinting by a sol–gel process for the selective and rapid removal of di‐(2‐ethylhexyl) phthalate from aqueous solution

Magnetic molecularly imprinted polymer nanoparticles for di‐(2‐ethylhexyl) phthalate were synthesized by surface imprinting technology with a sol–gel process and used for the selective and rapid adsorption and removal of di‐(2‐ethylhexyl) phthalate from aqueous solution. The prepared magnetic molecularly imprinted polymer nanoparticles were characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, thermogravimetric analysis, and vibrating sample magnetometry. The adsorption of di‐(2‐ethylhexyl) phthalate onto the magnetic molecularly imprinted polymer was spontaneous and endothermic. The adsorption equilibrium was achieved within 1 h, the maximum adsorption capacity was 30.7 mg/g, and the adsorption process could be well described by Langmuir isotherm model and pseudo‐second‐order kinetic model. The magnetic molecularly imprinted polymer displayed a good adsorption selectivity for di‐(2‐ethylhexyl) phthalate with respect to dibutyl phthalate and di‐n‐octyl phthalate. The reusability of magnetic molecularly imprinted polymer was demonstrated for at least eight repeated cycles without significant loss in adsorption capacity. The adsorption efficiencies of the magnetic molecularly imprinted polymer toward di‐(2‐ethylhexyl) phthalate in real water samples were in the range of 98–100%. These results indicated that the prepared adsorbent could be used as an efficient and cost‐effective material for the removal of di‐(2‐ethylhexyl) phthalate from environmental water samples.     

Copolymerization of 2‐hydroxyethyl methacrylate with a comonomer with spiroacetal moiety

The study reports the synthesis of a copolymer based on 2‐hydroxyethyl methacrylate and 3,9‐divinyl‐2,4,8,10‐tetraoxaspiro[5.5]undecane (U) acquired through radical polymerization in the presence of 2,2′‐azobis(2‐methylpropionitrile). The attempt was to have a solid content as high as 10 wt %. The polymerization process was conducted in the presence of a classic ionic surfactant—sodium lauryl sulfate—and comparatively using two variants of protective colloid β‐cyclodextrin and poly(aspartic acid), respectively. The prepared dispersions were characterized from the viewpoint of their hydrodynamic radius, zeta potential, and conductivity evolution during syntheses. The mean particle size and size distribution and zeta potential and conductivity were also evaluated for the synthesized polymeric particles. The compositions of the polymers were confirmed by FTIR and ¹H NMR spectra, and also, the thermal stability of the polymeric compounds was evaluated. SEM and AFM investigations of the polymer morphology are also presented. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Solvent effect on the free‐radical copolymerization of 2‐hydroxyethyl methacrylate with t‐butyl acrylate

The free‐radical copolymerization of 2‐hydroxyethyl methacrylate with t‐butyl acrylate was carried out at 50 °C in bulk and in 3 mol · L^?1 1,4‐dioxane and N,N′‐dimethylformamide solutions. Differences between the apparent reactivity ratios determined in this work indicated a noticeable solvent effect. This is explained with a qualitative bootstrap effect. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2043–2048, 2001