Poly(ether‐imide) and related sepiolite nanocomposites: investigation of physical,thermal, and mechanical properties

Novel poly(ether‐imide) and sepiolite nanocomposites were synthesized based on a unique diamine monomer with the aim of improving physical and mechanical properties of final polyimide films. The diamine was polycondensed with 4,4′‐(hexafluoroisopropylidene) diphthalic anhydride to produce related poly(ether amic acid) prepolymer. Pure poly(ether‐imide) and nanocomposite films were prepared via thermal imidization process of poly(ether amic acid). Coexistence of ether, pyridine, and phenylene functional groups in the diamine chemical structure resulted in flexible polyimide films with significant thermal, physical, and mechanical properties. Thermal stability, glass‐transition temperature, dimensional stability, and tensile properties of polymer and nanocomposites were studied and compared. Morphology of nanocomposites was also investigated using scanning and transmission electron microscopic methods to study the distribution and dispersion behavior of sepiolite nanofibers in the polyimide matrix. By introduction of sepiolite nanoparticles, overall improvement of properties was observed in respect to pure polyimides. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis and properties of segmented aromatic poly(ether sulfone)-amide and poly(ether sulfone)-imide copolymers

New segmented aromatic poly(ether sulfone)-amide and poly(ether sulfone)-imide copolymers were synthesized by the chain extension of α,w-diamine-terminated poly(ether sulfone) oligomer with both aromatic dicarboxylic acid chlorides and tetracarboxylic dianhydrides, respectively. Crystallization of the poly(ether sulfone)unit was suppressed by the introduction of amide or imide linkage along the polymer backbone, giving amorphous copolymers that were +eadily soluble in various organic solvents. The copolymers had somewhat higher glass transition temperatures than the parent poly(ether sulfone). They afforded transparent and tough films by solution casting. © 1992 John Wiley & Sons, Inc.     

High strength toughened epoxy nanocomposite based on poly(ether sulfone)‐grafted multi‐walled carbon nanotube

Hydroxyl terminated poly(ether sulfone) (PES) has been grafted on multi‐walled carbon nanotube (MWCNT). The grafting reaction was confirmed by different characterization techniques such as Fourier transform infrared spectroscopy, Raman spectroscopy, thermogravimetric analysis, and transmission electron microscopy. The extent of the grafting was found to be around 58 wt%. Hybrid nanocomposite of epoxy with the modified MWCNT was also prepared. Effect of grafting on the mechanical, thermal, and viscoelastic properties was studied. Dynamic mechanical studies show an increase in the storage modulus for the nanocomposite prepared using PES‐grafted MWCNT compared with neat epoxy system. PES‐grafted MWCNT–epoxy nanocomposite induces a significant increase in both tensile strength (26%) and fracture toughness (125%) of the epoxy matrix. Field emission scanning electron micrographs of fractured surfaces were examined to understand the toughening mechanism. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis and properties of new block copolymers based on poly(ether sulfone) and polyimides

New poly(ether sulfone)-polyimide block copolymers were synthesized from α,ω-diamineterminated poly(ether sulfone) oligomer, aromatic diamines, and aromatic tetracarboxylic dianhydrides by low-temperature solution polymerization and subsequent thermal imidization. The block copolymers were insoluble in organic solvents. The multiblock copolymers obtained by the two-pot method showed microphase separation, while the random block copolymers by the one-pot method had single phase morphology. The mechanical properties of the block copolymers were greatly improved by the introduction of polyimide into the poly(ether sulfone). © 1993 John Wiley & Sons, Inc.     

Synthesis and characterization of novel heat resistant poly(amide imide)s

A series of new poly(amide imide)s was prepared from new diacid containing sulfone, ether, amide and imide groups with various aromatic diamines. The diacid was synthesized via four steps, starting from reaction of 4-aminophenol with 4-nitrobenzoyl chloride in the presence of propylene oxide afforded N-(4-hydroxy phenyl)-4-nitrobenzamide. In the second step, reduction of nitro group resulted in preparation of 4-amino-N-(4-hydroxy phenyl) benzamide. In the next step for the preparation of diamine, the reaction of 4-amino-N-(4-hydroxy phenyl) benzamide with bis-(4-chlorophenyl) sulfone in the presence of K₂CO₃ was achieved. The prepared sulfone ether amide diamine was reacted with two moles of trimellitic anhydride to synthesize related sulfone ether amide imide diacid. The precursors and final monomer were characterized by FT-IR, H-NMR and elemental analysis. Direct polycondensation reaction of the sulfone ether amide imide diacid with different diamines in the presence of triphenyl phosphite afforded five different poly (sulfone ether amide imide amide)s. The obtained polymers were fully characterized and their physical properties including thermal behavior, thermal stability, solubility, and inherent viscosity were studied.     

Unexpected selective enhancement of the thermal stability of aromatic polyimide materials by cerium dioxide nanoparticles

The unusual effect of selective enhancement of the thermal stability of aromatic polyimide materials was established through the introduction of cerium dioxide nanoparticles into these polymers as nanofiller. Depending on the chemical structure of the polymers, a marked increase or a substantial decrease in the thermal stability of the nanocomposite material was registered by thermal analysis, as compared with that of unfilled polymer material. The positive effect was registered only for the composite materials based on the matrix polyimides containing the sulfur atoms located in the sulfonic groups arranged in the elementary units. The results of the thermogravimetric examination are compared with the data obtained during the mechanical tests of the same samples. The possible reasons for the alteration of the thermal stability of polymers by ceria nanoparticles are discussed. The effect above can be of substantial practical interest providing new options for the design of polyimide nanocomposite materials with enhanced thermal stability.     

Poly(lactic acid)/(styrene‐ethylene‐butylene‐styrene)‐g‐maleic anhydride copolymer/sepiolite nanocomposites: Investigation of thermo‐mechanical and morphological properties

In this study, sepiolite nanoclay is used as reinforcing agent for poly(lactic acid) (PLA)/(styrene‐ethylene‐butylene‐styrene)‐g‐maleic anhydride copolymer (SEBS‐g‐MA) 90/10 (w/w) blend. Effects of sepiolite on thermal behavior, morphology, and thermomechanical properties of PLA/SEBS‐g‐MA blend were investigated. Differential scanning calorimetry results showed 7% improvement in crystallinity at 0.5 wt% of sepiolite. The nanocomposite exhibited approximately 36% increase in the tensile modulus and 17% increase in toughness as compared with the blend matrix at 0.5 and 2.5 wt% of sepiolite respectively. Field emission scanning electron microscopy and transmission electron microscopy images exhibited sepiolite‐induced morphological changes and dispersion of sepiolite in both PLA and SEBS‐g‐MA phases. Dynamic mechanical analysis and wide angle X‐ray diffraction present evidences in support of the reinforcing nature of sepiolite and phase interaction between the filler and the matrix. This study confirms that sepiolite can improve tensile modulus and toughness of PLA/SEBS‐g‐MA blend.     

Synthesis,characterization, and thermal properties of novel arylene sulfone ether polyimides and polyamides

A new aromatic sulfone ether diamine was synthesized by nucleophilic aromatic substitution reaction of 5‐amino‐1‐naphthol with bis(4‐chlorophenyl) sulfone in the presence of potassium carbonate in a polar aprotic solvent. Polycondensation reactions of the obtained diamine with pyromellitic dianhydride (PMDA), benzophenonetetracarboxylic dianhydride (BTDA), and hexafluoroisopropylidene diphthalic anhydride (6FDA) resulted in preparation of thermally stable poly(sulfone ether imide)s. Poly(sulfone ether amide)s also were prepared by reaction of the diamine with terephthaloyl chloride (TPC) and isophthaloyl chloride (IPC). The prepared monomer and polymers were characterized by conventional methods. Physical and mechanical properties of polymers, including thermal stability, thermal behavior, solution viscosity, solubility behavior, and modulus, also were studied. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1487–1492, 2000     

Influence of imide functionalized organo‐modified Mg‐Al layered double hydroxide on the thermal and mechanical properties of new aliphatic‐aromatic poly (amide‐imide)

A new dicarboxylic acid modified Mg‐Al LDH (DLDH) containing imide groups was prepared and its effects on the thermal and mechanical properties of the new synthesized aliphatic‐aromatic poly (amide‐imide) (PAI) were investigated via preparation of PAI/nanocomposite films by solution casting method. The results of X‐ray diffraction (XRD), field emission‐scanning electron microscopy (FE‐SEM) and transmission electron microscopy (TEM) showed a uniform dispersion for LDH layers into the PAI matrix. For comparison, the effects of polyacrylic acid‐co‐poly‐2‐acrylamido‐ 2‐methylpropanesulfonic acid (PAMPS‐co‐PAA) modified Mg‐Al LDH (ALDH) on the PAI properties were also studied. The thermogravimetric analysis (TGA) results exhibited that the temperature at 5 mass% loss (T₅) increased from 277 °C to 310 °C for nanocomposite containing 2 mass% of DLDH, while T₅ for nanocomposite containing 2 mass% of ALDH increased to 320 °C, along with the more enhancement of char residue compared to the neat PAI. According to the tensile test results, with 5 mass% DLDH loading in the PAI matrix, the tensile strength increased from 51.6 to 70.8 MPa along with an increase in Young's modulus. Also the Young's modulus of PAI nanocomposite containing 5 mass% ALDH reduced from 1.95 to 0.81 GPa.     

Preparation and properties of poly(vinyl alcohol)/silica nanocomposites derived from copolymerization of vinyl silica nanoparticles and vinyl acetate

Nanocomposites of poly(vinyl alcohol)/silica nanoparticles (PVA-SNs) were prepared by in-situ radical copolymerization of vinyl silica nanoparticles functionalized by vinyltriethoxysilane (VTEOS) and vinyl acetate with benzoyl peroxide (BPO, i.e., initiator), subsequently saponified via direct hydrolysis with NaOH solution. The resulting vinyl silica nanoparticles, PVA-SNs were characterized by means of fourier transformation spectroscopy (FTIR), transmission electron microscopy (TEM) and the elemental analysis method. Effects of silica nanoparticles on viscosity and alcoholysis of PVA-SNs were studied by a ubbelohode capillary viscometer and the back titration method. The morphological structure of PVA-SN films was investigated by scanning electron microscopy (SEM). Differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and tensile test were used to determine the thermal and mechanical properties of PVA-SN films. The results indicated that the content of vinyl groups on the surface of the vinyl silica nanoparticles was up to 3.02 mmol/g and vinyl silica nanoparticles had been successfully copolymerized with vinyl acetate. Furthermore, compared to pure PVA, silica nanoparticles bonded with polymer matrix in a low concentration affected the viscosity and alcoholysis of the PVA-SNs materials. At the same time, it resulted in the improvement of the thermal and mechanical properties of the PVA-SN materials due to a strong interaction between silica nanoparticles and the polymer matrix via a covalent bond. It could be found that the optical clarity of the membrane was changed through UV-Vis absorption spectrum due to the introduction of silica nanoparticles.     

Synthesis and properties of amine‐containing poly(arylene ether sulfone) as an anion‐exchange matrix

Poly(arylene ether sulfone) (PSF), showing good thermal stability and excellent mechanical properties, was synthesized as an anion‐exchange matrix. It was synthesized by the condensation polymerization between bisphenol A and 4,4′‐dichlorodiphenylsulfone. 1°‐Amine‐containing poly(arylene ether sulfone) (1°‐APSF) was synthesized by the reduction reaction of a nitrated PSF. Then, it was transferred to 3°‐amine‐containing poly(arylene ether sulfone) (3°‐APSF) by the alkylation of the amine of 1°‐APSF. The properties of PSF, 1°‐APSF, and 3°‐APSF were investigated by Fourier transform infrared, ¹H NMR spectroscopy, differential scanning calorimetry, and thermogravimetric analysis. The introduction of the 3°‐amine group into PSF increased the glass‐transition temperature but decreased thermooxidative stability. The ion‐exchange capacities of 1°‐APSF and 3°‐APSF were shown to be 2.24 and 2.86 mequiv/g, respectively. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4281–4287, 2002     

Synthesis and characterization of silver—poly(methylmethacrylate) nanocomposites

The optical properties of silver nanoparticles embedded in poly(methylmethacrylate) (PMMA) was investigated as well as the influence of silver nanoparticles on the thermal properties of polymer matrix. The average size and particle size distribution of silver nanoparticles was determined using transmission electron microscopy. The obtained transparent nanocomposite films were optically characterized using UV-Vis and FTIR spectroscopy. Thermal stability of polymer matrix was improved upon incorporation of small amount of silver nanoparticles. Also, silver nanoparticles have pronounced effect on thermo-oxidative stability of PMMA matrix. The glass transition temperatures of nanocomposites are lower compared to the pure polymer.     

Properties of a nanocomposite polymer electrolyte from an amorphous comb-branch polymer and nanoparticles

Three fully amorphous comb-branch polymers based on poly(styrene-co-maleic anhydride) as a backbone and poly(ethylene glycol) methyl ether of different molecular weights as side chains were synthesized. SiO₂ nanoparticles of various contents and the salt LiCF₃SO₃ were added to these comb-branch polymers to obtain nanocomposite polymer electrolytes. The thermal and transport properties of the samples have been characterized. The maximum conductivity of 2.8×10^–4 S cm^–1 is obtained at 28 °C. In the system the longer side chain of the comb-branch polymer electrolyte increases in ionic conductivity after the addition of nanoparticles. To account for the role of the ceramic fillers in the nanocomposite polymer electrolyte, a model based on a fully amorphous comb-branch polymer matrix in enhancing transport properties of Li⁺ ions is proposed.     

Sulfonated carbon nanotubes/sulfonated poly(ether sulfone ether ketone ketone) composites for polymer electrolyte membranes

A series of composite membranes consisting of sulfonated carbon nanotubes (sCNTs) and sulfonated poly(ether sulfone ether ketone ketone) were successfully fabricated via the solution casting method. The chemical structure, as well as the long‐term stability of the sCNTs in different solvents, was investigated by Fourier transform infrared (FTIR) analysis and solubility experiment, respectively. The morphology, tensile strength, proton conductivity, and methanol permeability of the composite membranes were also investigated. The scanning electron microscope (SEM) observation indicated the good dispersion of the carbon nanotubes in polymer matrix as well as the strong interfacial bonding between the sulfonated poly(ether sulfone ether ketone ketone) (SPESEKK) matrix and sCNTs. The addition of either pristine carbon nanotubes or modified carbon nanotubes significantly enhanced the tensile strength of the SPESEKK membrane. The proton conductivity of the SPESEKK membrane increased while the methanol permeability decreased as the sCNTs content increased, showing a strong interaction between the modified nanotubes and SPESEKK. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis and characterization of hyperbranched aromatic poly(ether imide)s with terminal amino groups

We synthesized an AB₂‐type monomer, 4‐{4‐[di(4‐aminophenyl)methyl]phenoxy}phthalic acid, which contained one phthalic acid group and two aminophenyl functionalities. The direct self‐polycondensation of the AB₂‐type monomer in the presence of triphenylphosphite as an activator afforded a hyperbranched poly(ether imide) with a large number of terminal amino groups. This polymer was characterized with ¹H NMR and IR spectroscopy. The degree of branching of the hyperbranched poly(ether imide) was approximately 56%, as determined by a combination of model compound studies and an analysis of ¹H NMR spectroscopy integration data. The terminal amino groups underwent functionalization readily. The solubility and thermal properties of the resulting polymers depended on the nature of the chain end groups. In addition, the hyperbranched poly(ether imide) was grafted with polyhedral oligomeric silsesquioxane (POSS). Transmission electron microscopy analysis revealed that the grafted POSS molecules aggregated to form a nanocomposite material. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3726–3735, 2003     

Effect of sepiolite fiber on the structure and properties of the sepiolite/silica aerogel composite

Sepiolite fiber-reinforced silica aerogel composites for thermal insulators were prepared by dispersing sepiolite fiber in silica sol, aging, solvent exchanging, and drying in supercritical fluid. The surface treated sepiolite fiber and sepiolite/silica aerogel composite were characterized by scanning electron microscope; transmission electron microscope and Fourier transform infrared spectroscopy. The influence of surface treated sepiolite fiber on the mechanical and thermal properties of the aerogel composite was studied. The results indicate the hydroxyl groups on silica sol particles surface able to condense with the hydroxyls of sepiolite fibers with forming Si–O–Si between sepiolite fibers and aerogel matrix in the sol–gel process, which achieves excellent interfacial interaction in the sepiolite/silica aerogel composite, so the mechanical properties of the aerogel composite have been improved effectively without sacrificing much thermal insulating performance.     

Synthesis and properties of new block copolymers based on poly(ether sulfone) and aramids

New poly(ether sulfone)–aramid block copolymers were synthesized from an α, ω-diamineterminated poly(ether sulfone) oligomer, aromatic diamines, and aromatic dicarboxylic acid chlorides by the low-temperature solution polycondensation in N-methyl-2-pyrrolidone. By the introduction of aramid into the poly(ether sulfone), the glass transition temperatures of the block copolymers rose and the mechanical properties were significantly improved. Microphase separation, which often takes place in many block copolymers, did not occur in the present block copolymers. © 1993 John Wiley & Sons, Inc.     

Preparation and Characterization of Poly Vinyl Alcohol/Poly Vinyl Pyrrolidone/Clay Based Nanocomposite by Gamma Irradiation

A series of PVA/PVP/clay nanocomposite were prepared by gamma irradiation with different clay contents of (0.15, 0.3, 1, 1.5, 3 and 5 wt%). The gelation content and swelling behavior were investigated. The morphology and structure of PVA/PVP/clay nanocomposite and dispersion of the clay nanoparticles in the polymeric matrix were examined by infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM). The introduction of clay into polymeric matrix was investigated by X-ray diffraction pattern (XRD) and Transmission electron microscope (TEM). It is observed that, the increase of the clay content causes a decrease in the swelling percent. The thermal stability studies confirmed that the introduction of clay lead to an increase in the thermal stability. The TEM results showed that the clay nanoparticles are interchelated or exfoliated in the polymeric matrix. Some desirable characteristics such as relatively good swelling and excellent barrier capability against microbe penetration suggested that PVA/PVP/clay nanocomposite can be a good candidate as a wound dressing.     

Poly(aryl ether)s containing o‐terphenyl subunits. II. Random poly(ether sulfone)s

The synthesis of a new A₂X‐type difluoride monomer, N‐2‐pyridyl‐4′,4″‐bis‐(4‐fluorobenzenesulfonyl)‐o‐terphenyl‐3,6‐dimethyl‐4,5‐dicarboxylic imide ( 3 ), is described. The monomer 3 was incorporated into a series of copoly(aryl ether sulfone)s by polymerization of 4,4′‐isopropylidenediphenol and 4,4′‐difluorophenylsulfone. The incorporation of monomer 3 had an observable effect on both the glass‐transition temperature of poly(aryl ether sulfone)s and the tendency for macrocyclic oligomers to form during polymerization. Replacement of the pyridyl imide group via a transimidization reaction with propargyl amine proceeded quantitatively and without polymer degradation. The acetylene containing copoly(aryl ether sulfone) could be crosslinked by simple thermal treatment, resulting in an increase in the glass‐transition temperature and solvent resistance. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 9–17, 2000     

Synthesis and Properties of Novel Thermoplastic Poly(ester-ether-imide) Elastomers Derived from 4,4′-bis(N-trimellitimide)-diphenylether Unit with Excellent Thermal Stability

The novel poly(ester-ether-imide)s (PEEIs) were synthesized by 1, 6-hexanediol (HD), poly(tetramethylene glycol) (PTMG1000) and imide dicarboxylic acid was prepared from 1,2,4-trimellitic anhydride (TMA) and 4,4′-oxydianiline (ODA) by the traditional chemical two-step method. The structures of synthesized imide dicarboxylic acid and poly(ester-ether-imide)s were confirmed by FT-IR and ¹H-NMR spectroscopy, respectively. The intrinsic viscosities, thermal properties, dynamic mechanical properties, mechanical properties and solubility of these polymers were characterized. The results indicate that these polymers have good solubility, exhibit excellent thermal stability owing to the introduction of imide units, and the tensile strength of PEEIs increases with increasing the number of imide groups while maintaining the good elasticity of the polymers.