Novel fiber reinforced bismaleimide/diallyl bisphenol A/microcapsules composites

Three kinds of poly(urea‐formaldehyde) (PUF) microcapsules filled with epoxy resins (MCEs) were applied to bismaleimide (BMI)/O,O′‐diallyl bisphenol A (BA) system to develop novel fiber reinforced BMI/BA/MECs composites. The effects of MCEs on the mechanical properties, the hot‐wet resistance, and the dynamic mechanical properties of fiber reinforced BMI/BA composites were investigated. The morphologies of fiber reinforced BMI/BA/MCEs composites were characterized by scanning electron microscope (SEM) and optical microscope (OM). Results indicate that the appropriate contents of MCEs can significantly improve the mechanical properties and the hot‐wet resistance of fiber reinforced BMI/BA composites. In this study, MCEs may decrease the storage modulus of fiber reinforced BMI/BA composite but they have no significant influence on the glass transition temperature (T_g) of the composite. Copyright © 2010 John Wiley & Sons, Ltd.     

Completely biodegradable composites of poly(propylene carbonate) and short,lignocellulose fiber Hildegardia populifolia

The composites of biodegradable poly(propylene carbonate) (PPC) reinforced with short Hildegardia populifolia natural fiber were prepared by melt mixing followed by compression molding. The mechanical properties, thermal properties, and morphologies of the composites were studied via static and dynamic mechanical measurements, thermogravimetric analysis, and scanning electron microscopy (SEM) techniques, respectively. Static tensile tests showed that the stiffness and tensile strength of the composites increased with an increasing fiber content. However, the elongation at break and the energy to break decreased dramatically with the addition of short fiber. The relationship between the experimental results and the compatibility or interaction between the PPC matrix and fiber was correlated. SEM observations indicated good interfacial contact between the short fiber and PPC matrix. Thermogravimetric analysis revealed that the introduction of short Hildegardia populifolia fiber led to a slightly improved thermooxidative stability of PPC. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 666–675, 2004     

Blends of isotactic polypropylene and natural terpene resins. I. Phase structure,thermal, and dynamic‐mechanical properties

This article discusses the influence of two natural terpene resins (NTR), poly(α‐pinene) (PαP A115) and poly(d‐limonene) (PL C115), on morphology, miscibility, thermal, and dynamic‐mechanical properties of their blends with isotactic polypropylene (iPP). The NTR have interesting physical and chemical properties, and they are approved for food contact application. From the results of differential scanning calorimetry and dynamic‐mechanical thermal analysis it was deduced that both the resins were completely miscible with the amorphous iPP up to the composition investigated here (70/30 wt %). Scanning electron microscopy (SEM) analysis instead showed that the 70/30 iPP/PαP A115 blend and 80/20 and 70/30 iPP/PL C115 blends contained very small domains homogeneously distributed into the matrix. It is hypothesized that the domains are likely formed by the terpene‐rich phase, and the matrix by the iPP‐rich phase (besides the crystallized iPP phase). The iPP‐rich phase and the NTR‐rich phase would have the glass transition temperatures so close that they cannot be resolved by DSC and DMTA. Finally, for the iPP/PαP A115 system an upper critical solution temperature (UCST) is proposed. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 867–878, 1999     

Short carbon fiber reinforced aromatic polydisulfide derived from cyclic (4,4′‐oxybis(benzene)disulfide) via ring‐opening polymerization

Morphology, mechanical and thermal properties of short carbon fiber reinforced poly(arylene disulfide) synthesized by ring‐opening reaction of cyclic(arylene disulfide) oligomers were studied. These macrocyclic oligomers were prepared from 4,4′‐oxybis(benzenethiol) by oxidation coupling cyclization. Ring‐opening polymerization (ROP) was carried out by in situ melt molding in air. Oxidation reaction during the ROP was detected using the Raman spectrum technique. Three‐point bending tests were performed to determine the flexural properties of neat polymers and the composites. The results showed that the flexural strength and modulus of poly(arylene disulfide)/carbon fiber composites were greatly enhanced with the carbon fiber addition. The maximum weight loss peak temperatures of the composites increased with increasing short carbon fiber content. Good adhesion between carbon fiber and the matrix was observed using scanning electron microscopy (SEM) technique. Copyright © 2005 John Wiley & Sons, Ltd.     

Nanoclay modified silica phenolic composites: mechanical properties and thermal response under simulated atmospheric re‐entry conditions

Ablative nanocomposites based on nanoclay‐dispersed addition curable propargylated phenolic novolac (ACPR) resin, reinforced with chopped silica fiber, were investigated for their thermal response behavior under simulated heat flux conditions corresponding to typical atmospheric re‐entry conditions. Organically modified nanoclay (Cloisite 30B) was incorporated to different extents (1–10%) in the ACPR resin matrix containing silica fiber to form the composite. The composites displayed optimum mechanical properties at around 3 wt% of nanoclay loading. The resultant composites were evaluated for their ablative characteristics as well as mechanical, thermal and thermo‐physical properties. The reinforcing effect of nanoclay was established and correlated to the composition. The mechanical properties of the composites and its pyrolysed product improved at moderate nanoclay incorporation. Plasma arc jet studies revealed that front wall temperature is lowered by 20°C and that at backwall by 10–13°C for the 3 wt% nanoclay‐incorporated composites due to impedance by nanoclay for the heat conduction. Nanoclay diminished the coefficient of thermal expansion by almost 50% and also reduced the flammability of the composites. The trend in mechanical properties was correlated to the microstructural morphology of the composites. The nanomodification conferred better strength to the pyrolysed composites. Copyright © 2014 John Wiley & Sons, Ltd.     

Biodegradable polyester/modified mesoporous silica composites for effective bone repair with self‐reinforced properties

A series novel composites based on poly(_L‐lactide) (PLLA) oligomer modified mesoporous silica (MCM41) homogeneous dispersed into poly(_L‐lactide‐co‐trimethylene carbonate‐co‐glycolide) (PLTG) terpolymer has been successfully prepared. The structure of PLTG terpolymer was characterized by ¹H NMR. The structure and properties of modified and unmodified MCM41 were attested by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analyzer (TGA), X‐ray diffraction (XRD), N₂ adsorption–desorption, scanning electron microscope (SEM), and transmission electron microscope (TEM), which demonstrated that the MCM41 was successfully grafted by the PLLA oligomer. The effect of different concentration of modified MCM41 in PLTG matrix on thermal properties, mechanical properties, and hydrophilicity was investigated by TGA, differential scanning calorimetry (DSC), mechanical testing, contact angle measurement, and SEM. The results of mechanical tests showed that 5 wt% of modified MCM41 nanoparticles gave rise to optimal reinforcing effect. The tensile strength, Young's modulus, and elongation at break of the PLTG/PLLA‐MCM41 (5%) composites were 33.2 Mpa, 1.58 Gpa, and 268.7%, respectively, which were all higher than the PLTG/MCM41 (5%) composites and pristine PLTG matrix, which were due to good interfacial adhesion between the PLTG matrix and MCM41 nanoparticles. TGA and DSC have shown that 5% modified MCM41 in the PLTG increased the temperature of composite degradation and T_g. Water contact angle measurement showed the hydrophilicity of the composites increases with the increase of modified MCM41 content. The live/dead assay showed that the modified MCM41 existing on the PLTG matrix presents very excellent cytocompatibility. Therefore, the novel composite material represents promising way for bone tissue engineering application.     

Lignocellulosic composite

Banana pseudostem fiber which is a lignocellulosic material, relatively inexpensive, and abundantly available was assessed in terms of its fiber‐matrix adhesion and dispersion in composites. Different types of adhesives were used. The mechanical and water absorption properties were investigated. Overall, for the produced composites, the incorporation of sawdust‐urea‐formaldehyde resin into prehydrolyzed banana fiber resulted in the best mechanical properties. Good adhesion‐fiber interaction is believed to be responsible for the good ultimate performance. The superior reinforcing characteristics of sawdust resin were shown by scanning electron microscopy (SEM), which revealed better fiber‐matrix adhesion. Water absorption tests revealed that the presence of the adhesives affected the amount of water absorbed. Copyright © 2004 John Wiley & Sons, Ltd.     

Improved mechanical properties of epoxy‐based composites with hyperbranched polymer grafting glass‐fiber

A glass‐fiber, grafted by hyperbranched polymer with hydroxyl group (GF‐HBPH), reinforced epoxy‐based composite was evaluated for mechanical properties and compared with the neat epoxy and silanized glass‐fiber, GF‐APS. The epoxy/GF‐HBPH composites were studied by attenuated total internal reflectance infrared spectroscopy, ¹H nuclear magnetic resonance spectroscopy, thermal gravimetric analysis, mechanical properties analysis, and field emission‐scanning electron microscopy. The results showed that the incorporation of GF‐HBPH could simultaneously enhance the mechanical properties of the epoxy composites. Field emission‐scanning electron microscopy images of the fracture surfaces of the test specimens were used to support the results and conclusions. Copyright © 2016 John Wiley & Sons, Ltd.     

Novel propargyl‐substituted azo‐coupled phenolic resins

Novel propargyl that contains phenolic resins via azo‐coupling reaction was synthesized. Peculiarities of curing process were investigated by differential scanning calorimetry analysis. Polymerization of resins with azo groups was estimated to be affected by radicals obtained at resin decomposition causing 10°C peak shift to lower temperatures in comparison with resin containing only propargyl group. At the same time, polymerization of triple propargyl bond was shown to not proceed at radical initiation until Cleisen rearrangement and chromene formation. Thermogravimetric analysis revealed increase of thermal stability by 170–190°C and char yield by up to 20% for modified resins in comparison with original novolac resin. Heat deflection temperature estimated by dynamic mechanical analysis was also shown to be increased by at least 110°C for modified resins in comparison with novolac resin. All the synthesized resins are soluble in acetone and used for preparation of unidirectional glass fiber‐based composites. Flexural strength and modulus for modified resins‐based composites were shown to increase by at least 25% and 10% correspondingly in comparison with novolac‐based composite. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis and properties of sulfur‐contained poly(silylene arylacetylene)s

Poly(silylene arylacetylene) (PSA) is a kind of poly(arylacetylene) silicon‐containing resins with excellent heat resistance and good mechanical performances. In this article, the sulfur atom is introduced into the main chain of the PSA molecule to obtain a sulfur‐containing poly(silylene arylacetylene), named S‐PSA. By Williamson and Sonogashira reactions, bis(4‐ethynylphenyl)sulfide and bis(4‐ethynylphenyl)sulfone were synthesized. Thereafter, through Grignard reagent way, the poly(silylene ethynylene phenylene sulfide phenylene ethynylene) (PSESE) and poly(silylene ethynylene phenylene sulfone phenylene ethynylene) (PSESO₂E) were synthesized from bis(4‐ethynylphenyl)sulfide, bis(4‐ethynylphenyl)sulfone, and methylphenyl dichlorosilane. Poly(silylene ethynylene phenylene sulfoxide phenylene ethynylene) (PSESOE) was synthesized by the oxidation of PSESE. The structures and properties of these resins were characterized and the mechanical properties of the T300 reinforced composites were tested. The results show that the novel S‐PSA resins have excellent heat resistance and good mechanical properties, and could be used as resin matrices for high‐performance composites in high‐tech fields. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2324–2332     

Mechanical characterization of polymethyl methacrylate composites reinforced with surface-coated carbon fibers

Using trihydroxy polyether polyol (PPG), diphenylmethane diisocyanate (MDI) as soft segment and hard segment, carbon fiber (CF) as reinforcement, and self-crosslinking CF/polymethyl methacrylate (PMMA) composite was prepared by prepolymer method. In this study, starch and octanoyl chloride were esterified to obtain esterified starch (SE). The fiber is then melt blended with PMMA matrix to prepare PMMA composite. Fourier-transform infrared spectroscopy (FTIR) and SEM were used to analyze and characterize the composites produced. The results show that the composite material was prepared by separately modifying the fiber with NaOH and SE, respectively. The mechanical properties of the composite materials prepared by the modified fiber are improved, and the fiber and the PMMA matrix showed better compatibility. The mechanism of comodified fiber enhanced the mechanical properties of its composites.     

碳纳米管改性聚苯硫醚熔纺纤维的结构与性能研究

将多壁碳纳米管(MWCNTs)和聚苯硫醚(PPS)经过熔融挤出后制备成复合材料切片,并采用熔融纺丝法制得碳纳米管改性聚苯硫醚复合纤维.采用扫描电镜(SEM)、拉曼光谱、示差扫描量热分析(DSC)、动态机械分析(DMA)以及力学性能测试等表征手段研究了复合纤维中碳管的分散状态,与基体的界面作用,复合纤维的结晶性能以及力学性能,从而探讨了聚苯硫醚/碳纳米管复合纤维体系的微观结构与宏观性能之间的关系.研究表明,聚苯硫醚分子结构与碳纳米管之间具有的π-π共轭作用使碳管较为均匀的分散在基体中,界面结合较为紧密.同时熔融纺丝过程中的拉伸作用使碳管进一步解缠并使碳管沿纤维拉伸方向取向.另一方面,拉曼光谱显示拉伸作用有效地增强了界面作用,有利于外界应力的传递.碳管的良好分散以及强的界面作用使复合纤维力学性能得到大幅度的提高,当碳管含量达到5 wt%时,复合纤维的模量有了明显的提高,拉伸强度较纯PPS纤维提高了近220%.     

Synergistic effect of polyfunctional silane coupling agent and styrene acrylonitrile copolymer on the water‐resistant and mechanical performances of glass fiber–reinforced polyamide 6

Adverse effects of a high‐water absorption rate on properties of a glass fiber–reinforced polyamide 6 (GF‐PA6) composite significantly reduce performance and limit application in humid environments. In this paper, a polyfunctional silane (PFS) coupling agent with amino (–NH₂) and imino (–NH) groups and styrene acrylonitrile copolymer (SAN) were added to a composite, GF‐PA6, to prepare GF‐PA6/SAN/PFS composites via melt blending in a twin‐screw extruder. The effects of SAN and PFS content on the static and dynamic mechanical properties of the composites before and after water absorption were investigated in detail. The microstructure of the fracture surface was analyzed by a scanning electron microscope (SEM). The results show that the addition of SAN and PFS could effectively inhibit water absorption of the GF‐PA6 composites. The alkoxyl groups on PFS reacted chemically with the nitrile groups of SAN, which enriched SAN on the interface between the fiber and matrix during the extrusion and mixing process to improve the effect of water prevention. Therefore, the mechanical properties of the wet state were notably improved while preventing water from permeating the interface by only the addition of a small amount of SAN and PFS. Dynamic mechanical analysis (DMA) results showed that the addition of PFS improved the compatibility of PA6 with SAN and enhanced the interface adhesion between fiber and PA6. In terms of test result of the comprehensive performance, 10 phr SAN with 0.6 phr PFS was the best dosage.     

Effect of surface‐grafted ionic groups on the performance of cellulose‐fiber‐reinforced thermoplastic composites

The influence of the surface chemistry of the cellulose fiber and polymer matrix on the mechanical and thermal dynamic mechanical properties of cellulose‐fiber‐reinforced polymer composites was investigated. The cellulose fiber was treated either with a coupling agent or with a coupling‐agent treatment followed by the introduction of quaternary ammonium groups onto the fiber surface, whereas the polymer matrix, with opposite polar groups such as polystyrene incorporated with sulfonated polystyrene and poly(ethylene‐co‐methacrylic acid), was compounded with the fiber. The grafting of the fiber surface was investigated with Fourier transform infrared spectroscopy and X‐ray photoelectron spectroscopy. Experimental results showed that an obvious improvement in the mechanical strength could be achieved for composites with an ionic interface between the fiber and the polymer matrix because of the adhesion enhancement of the fiber and the matrix. The improved adhesion could be ascribed to the grafted ionic groups at the cellulose‐fiber surface. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2022–2032, 2003     

Improvement of interfacial adhesion for plasma‐treated aramid fiber‐reinforced poly(phthalazinone ether sulfone ketone) composite and fiber surface aging effects

Interfacial adhesion between the fiber and the matrix in a composite is a primary factor for stress transfer from the matrix to the fiber. In this study, oxygen plasma treatment method was applied to modify the fiber surface for improving interfacial adhesion of aramid fiber‐reinforced poly(phthalazinone ether sulfone ketone) (PPESK) composite. Composite interfacial adhesion properties were determined by interlaminar shear strength (ILSS) using a short‐beam bending test. The composite interfacial adhesion mechanism was discussed by SEM. The changes of chemical composition and wettability for plasma‐treated fiber surfaces stored in air as long as 10 days were investigated by XPS and dynamic contact angle analysis (DCAA), respectively. Results indicated that oxygen plasma treatment was an effective method for improving interfacial adhesion; plasma‐treated fiber surface suffered aging effects during storage in air. Copyright © 2008 John Wiley & Sons, Ltd.     

The thermal and dielectric properties of high performance cyanate ester resins/microcapsules composites

Novel high performance bisphenol A dicyanate ester (BADCy) resins/poly(urea-formaldehyde) microcapsules filled with epoxy resins (MCEs) composites have been prepared. The effects of different contents of MCEs on the thermal and dielectric properties of cured BADCy were investigated using dynamic mechanical analyzer (DMA), thermalgravimetric analyzer (TGA) and broadband dielectric analyzer. The dielectric properties of BADCy/MCEs treated in hot water and hot air were also discussed. The morphologies of BADCy/MCEs composites were characterized by scanning electron microscopy (SEM). Results indicate that the appropriate content of MCEs can improve or maintain the thermal stability, the low dielectric constant and dielectric loss of cured BADCy mainly owing to higher conversion of cyanate ester (-OCN) groups. After aged in hot water and hot air, respectively, BADCy/MCEs composites with small content of MCEs can retain the low dielectric constant and dielectric loss.     

Mechanical properties and morphological structures of short glass fiber reinforced PP/EPDM composite

The mechanical properties and crystal morphological structures of short glass fiber (SGF) reinforced dynamically photo-irradiated polypropylene (PP)/ethylene-propylene-diene terpolymer (EPDM) composites were studied by mechanical tests, wide-angle X-ray diffraction (WAXD), optical microscopy, scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and thermogravimetric analyzer (TGA). The mechanical properties of PP/EPDM composites, especially the tensile strength were greatly strengthened by dynamically photo-irradiation and the incorporation of SGF. The results from the WAXD, SEM, DSC, and TGA measurements reveal: (i) the formation of β-type crystal of PP in the PP/EPDM/SGF composite; (ii) the fiber length in dynamically photo-irradiated PP/EPDM/SGF composites are general longer than that in corresponding unirradiated samples. The size of EPDM phase in the photo-irradiated composites reduces obviously whereas the droplet number increases; (iii) photo-irradiation improves the interface adhesion between SGF and polymer matrix; (iv) the melting and crystallization temperatures of the photo-irradiated composites are not affected greatly by increasing the SGF content; (v) the thermal analysis results show that the incorporation of SGF into PP/EPDM plays an important role for increasing its thermal stability.     

The surface modification of carbon fiber for thermoplastic HDPE composites

The interfacial adhesion strength between the fiber and the matrix greatly affects the properties of the carbon fiber (CF)–reinforced composite. The presence of surface functional groups on the fiber and changes in surface roughness were determined by X-ray photoelectron spectroscopy, scanning electron microscopy (SEM), and Raman spectroscopy. The effect of surface modification of CF on the mechanical properties and tribological properties of the composites is enhanced. The performance has been significantly improved. SEM analysis showed that modification had a positive effect on the interface between fiber and matrix. In the paper, the method of CF modification and the treatment of enhanced high-density polyethylene have simple and effective characteristics, which can be widely used and have guiding significance for industrial production.     

Improvement of PBO fiber surface and PBO/PPESK composite interface properties with air DBD plasma treatment

The interface of fibrous composites is a key factor to the whole properties of the composites. In this study, the effects of air dielectric barrier discharge (DBD) plasma discharge power density on surface properties of poly(p‐phenylene benzobisoxazole) (PBO) fiber and the interfacial adhesion of PBO fiber reinforced poly(phthalazinone ether sulfone ketone) (PPESK) composite were investigated by several characterization methods, including XPS, SEM, signal fiber tensile strength, interlaminar shear strength, and water absorption. After the air DBD plasma treatment at a power density of 41.4 W/cm³, XPS analysis showed that some polar functional groups were introduced on the PBO fiber surface, especially the emergence of a new oxygen‐containing group (?O–C = O group). SEM observations revealed that the air DBD plasma treatment had a great influence on surface morphologies of the PBO fiber, while the signal fiber tensile strength results showed only a small decline of 5.9% for the plasma‐treated fiber. Meanwhile, interlaminar shear strength value of PBO/PPESK composite was increased to 44.71 MPa by 34.5% and water absorption of the composite decreased from 0.46% for the untreated specimen to 0.27%. The results showed that the air DBD plasma treatment can effectively improve the properties of the PBO fiber surface and the PBO/PPESK composite interface. Results obtained from the above analyses also showed that both the fiber surface and the composite interface performance would be reduced when an undue plasma discharge power density was applied. Copyright © 2011 John Wiley & Sons, Ltd.     

Glass-fibre reinforced composite materials based on unsaturated polyester resins

The effect of glass-fibre content on the thermal and mechanical properties of cross-linked composites based on unsaturated polyester resins have been investigated by thermogravimetric analysis, differential scanning calorimetry, dynamic mechanical thermal analysis and by measuring the heat distortion temperature (HDT). Two different matrix resins and two different glass mats were used, and the glass-fibre contents varied. Altogether 12 composite systems were tested. The glass- transition temperature of each composite was characteristic to the matrix resin and did not depend on the glass-fibre content, as it was expected. The effect of glass-fibre content on the storage modulus and on HDT has been elucidated. It has been found that up to 12 mass% (6?vol%) glass-fibre content the HDT did not change, above this value it increased with increasing glass-fibre content for each composite, but not at the same extent. This means that matrix-fibre interaction has an important role in the performance of the composites at elevated temperatures. Storage moduli increased with increasing glass-fibre content. The temperatures detected by dynamic mechanical thermal analysis corresponding to the storage modulus of 750?MPa??calculated by Takemori??are above the glass-transition and also increased with higher glass-fibre content in accordance with the real heat-distortion temperature measurements. It may be concluded that the effect of reinforcement on the performance of the composite could be detected more reliably by HDT measurements, since it gives information on the deformation of the composites. Matrix-fibre interaction has an essential role on the performance and on the HDT of the composite materials.