Thermal and mechanical properties of random copolymers of diisopropyl fumarate with 1‐adamantyl and bornyl acrylates with high glass transition temperatures

We report the thermal, optical, and mechanical properties of random copolymers produced by radical copolymerizations of diisopropyl fumarate (DiPF) with 1‐adamantyl acrylate (AdA) and bornyl acrylate (BoA). The effects of a methylene spacer included in the main chain and bulky ester alkyl groups in the side chain on the copolymer properties are discussed. The produced copolymers are characterized by NMR and UV–vis spectroscopies, size exclusion chromatography, thermogravimetric analysis, differential scanning calorimetry, and dynamic mechanical analysis (DMA). The copolymerization rate and the molecular weight of the copolymers increase with an increase in the acrylate content in feed during the copolymerization (M_w = 25–110 × 10³). The onset temperature of decomposition (T_d5) and the glass transition temperature (T_g) of the copolymers also increase according to the content of the acrylate units (T_d5 = 296–329 °C and 281–322 °C, T_g = 80–133 °C and 91–106 °C for the copolymers of DiPF with AdA and BoA, respectively). Transparent and flexible copolymer films are obtained by a casting method and their optical properties such as transparency and refractive indices are investigated (n_D = 1.478–1.479). The viscoelastic data of the copolymers are collected by DMA measurements under temperature control. The storage modulus decreases at a temperature region over the T_g value of the copolymers, depending on the structure and amount of the acrylate units. The sequence structure of the copolymers is analyzed based on monomer reactivity ratios and composition in order to discuss the copolymer properties related to chain rigidity and sequence length distribution. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 288–296     

Synthesis,micelle formation,and bulk properties of poly(ethylene glycol)‐b‐poly(pentafluorostyrene)‐g‐polyhedral oligomeric silsesquioxane amphiphilic hybrid copolymers

The synthesis, micelle formation, and bulk properties of semifluorinated amphiphilic poly(ethylene glycol)‐b‐poly(pentafluorostyrene)‐g‐cubic polyhedral oligomeric silsesquioxane (PEG‐b‐PPFS‐g‐POSS) hybrid copolymers is reported. The synthesis of amphiphilic PEG‐b‐PPFS block copolymers are achieved using atom transfer radical polymerization (ATRP) at 100 °C in trifluorotoluene using modified poly(ethylene glycol) as a macroinitiator. Subsequently, a proportion of the reactive para‐F functionality on the pentafluorostyrene units was replaced with aminopropylisobutyl POSS through aromatic nucleophilic substitution reactions. The products were fully characterized by ¹H‐NMR and GPC. The products, PEG‐b‐PPFS and PEG‐b‐PPFS‐g‐POSS, were subsequently self‐assembled in aqueous solutions to form micellar structures. The critical micelle concentrations (cmc) were estimated using two different techniques: fluorescence spectroscopy and dynamic light scattering (DLS). The cmc was found to decrease concomitantly with the number of POSS particles grafted per copolymer chain. The hydrodynamic particle sizes (R_h) of the micelles, calculated from DLS data, increase as the number of POSS molecules grafted per copolymer chain increases. For example, R_h increased from ～60 nm for PEG‐b‐PPFS to ～80 nm for PEG‐b‐PPFS‐g‐POSS25 (25 is the average number of POSS particles grafted copolymer chain). Static light scattering (SLS) data confirm that the formation of larger micelles by higher POSS containing copolymers results from higher aggregation numbers (N_agg), caused by increased hydrophobicity. The R_g/R_h values, where R_g is the radius of gyration calculated from SLS data, are consistent with a spherical particle model having a core‐shell structure. Thermal characterization by differential scanning calorimetry (DSC) reveals that the grafted POSS acts as a plasticizer; the glass transition temperature (T_g) of the PPFS block in the copolymer decreases significantly with increasing POSS content. Finally, the rhombohedral crystal structure of POSS in PEG‐b‐PPFS‐g‐POSS was verified by wide angle X‐ray diffraction measurements. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 152–163, 2010     

Breadth of glass transition temperature in styrene/acrylic acid block,random, and gradient copolymers: Unusual sequence distribution effects

Block, random, and gradient copolymers of styrene (S) and acrylic acid (AA) are synthesized by conventional or controlled radical polymerization, and their glass transition temperature (T_g) behaviors are compared. The location and breadth of the T_gs are determined using derivatives of differential scanning calorimetry heating curves. Each S/AA random copolymer exhibits one narrow T_g, consistent with a single phase of limited compositional nanoheterogeneity. Block copolymers exhibit two narrow T_gs originating from nanophase separation into ordered domains with nearly pure S or nearly pure AA repeat units. Each gradient copolymer exhibits a T_g response with a ～50–56 °C breadth that extends beyond the upper T_g of the block copolymers. For copolymers of similar composition, the maximum value in the gradient copolymer T_g response is consistent with that of a random copolymer, which has an enhanced T_g relative to poly(acrylic acid) due to more effective hydrogen bonding when AA units are separated along the chain backbone by S units. These results indicate that gradient copolymers with ordered nanostructures can be rationally designed, which exhibit broad glass transitions that extend to higher temperature than the T_gs observed with block copolymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2842–2849, 2007     

Dynamic mechanical and dielectric properties of epoxidized SBS triblock copolymer

The morphological and dynamic properties of epoxidized styrene–butadiene–styrene block copolymers were studied and compared with their parent styrene–butadiene–styrene block copolymer (SBS). Two peaks were observed in the mechanical loss (tan δ) curve which can be attributed to segmental motion of epoxidized polybutadiene (EPPB) and polystyrene. Analysis by DSC thermograms also showed the linear increase of glass transition temperature for EPPB domain with the epoxy group content. Phase separated structures of epoxidized SBS as observed by TEM suggests a considerable degree of mixing occurred between phases after 80 mol % of the double bonds in SBS were epoxidized. The interfacial region displays a third peak and causes much steeper drop in modulus at higher temperature than T_g of EPPB. Parallel dielectric relaxation measurements were also made in the frequency range of 30 Hz–1 KHz as a function of temperature. In each dielectric constant (?′) curve, there is a maximum near the T_g of EPPB determined from the dielectric loss tangent curve. The shift in T_g of EPPB versus epoxy group content was consistent with that measured by the thermal and dynamic mechanic analysis. These findings indicated an 8°C shift in glass transition temperature as the epoxy group content in EPPB increased 10%.     

Thermal properties of poly(methyl methacrylate-co-butyl acrylate-co-acrylic acid) modified with divinyl benzene and vinyltrimethoxysilane

The effect of butyl acrylate (BA), divinyl benzene (DVB) and vinyltrimethoxysilane (TMVS) on the thermal properties of poly(methyl methacrylate-co-butyl acrylate-co-acrylic acid) was investigated. Glass transition temperature (T_g), melting temperature (T_m) and specific heat capacity of the copolymers were investigated using Differential Scanning Calorimetry. Thermal stability of the copolymers which is associated with the degradation temperature (T_d) was studied by Thermogravimetric Analysis. Polyacrylates with T_g ranges between -19°Cand 19°C were obtained. With the incorporation of >7 wt% of DVB, the T_g of the copolymer increases from about ?17°C to ?10°C even though they have not undergone UV irradiation. Gel content results prove that crosslinking has occurred in the copolymers. With increasing amount of TMVS from 0 wt% to 7 wt%, the T_m of the copolymers prepared at acidic pH is about 40-60°C higher than that at the alkaline pH. However, the addition of TMVS gives no significant effect to the T_g and T_d of the copolymer films. The thermal stability of the copolymer has improved with increasing amount of BA and DVB, with DVB being more effective. The highest T_d of 425°C with 8% of DVB has been obtained. Consequently, a polyacrylate copolymer with a T_g of about ?13°C, a T_m of 170 °C and a T_d of about 424°C has been successfully synthesized. Hence, the soft polyacrylate with its relatively high T_m and T_d could serve as a superb material especially to be applied in the areas that require high melting temperature and good thermal stability.     

Statistical copolymers of methyl methacrylate and 2‐methacryloyloxyethyl ferrocenecarboxylate: Monomer reactivity ratios,thermal and electrochemical properties

Statistical copolymers of methyl methacrylate (MMA) with 2‐methacryloyloxyethyl ferrocenecarboxylate (MAEFC) were prepared by free radical polymerization. The reactivity ratios were estimated using the Fineman‐Ross, inverted Fineman‐Ross, Kelen‐Tüdos, and extended Kelen‐Tüdos graphical methods. Structural parameters of the copolymers were obtained by calculating the dyad monomer sequence fractions and the mean sequence length. The glass‐transition temperature (T_g) values of the copolymers were measured and examined by means of several theoretical equations, allowing the prediction of these T_g values. The thermal degradation behavior of the copolymers was also studied and compared with the respective homopolymers. Cyclic voltammetry was employed to study the electrochemical properties of the copolymers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and characterization of well‐defined block and statistical copolymers based on lauryl methacrylate and 2‐(acetoacetoxy)ethyl methacrylate using RAFT‐controlled radical polymerization

Four well‐defined diblock copolymers and one statistical copolymer based on lauryl methacrylate (LauMA) and 2‐(acetoacetoxy)ethyl methacrylate (AEMA) were prepared using reversible addition‐fragmentation chain transfer (RAFT) polymerization. The polymers were characterized in terms of molecular weights, polydispersity indices (ranging between 1.12 and 1.23) and compositions by size exclusion chromatography and ¹H NMR spectroscopy, respectively. The preparation of the block copolymers was accomplished following a two‐step methodology: First, well‐defined LauMA homopolymers were prepared by RAFT using cumyl dithiobenzoate as the chain transfer agent (CTA). Kinetic studies revealed that the polymerization of LauMA followed first‐order kinetics demonstrating the “livingness” of the RAFT process. The pLauMAs were subsequently used as macro‐CTA for the polymerization of AEMA. The glass transition (T_g) and decomposition temperatures (ranging between 200 and 300 °C) of the copolymers were determined using differential scanning calorimetry and thermal gravimetric analysis, respectively. The T_gs of the LauMA homopolymers were found to be around ?53 °C. Block copolymers exhibited two T_gs suggesting microphase separation in the bulk whereas the statistical copolymer presented a single T_g as expected. Furthermore, the micellization behavior of pLauMA‐b‐pAEMA block copolymers was investigated in n‐hexane, a selective solvent for the LauMA block, using dynamic light scattering. pLauMA‐b‐pAEMA block copolymers formed spherical micelles in dilute hexane solutions with hydrodynamic diameters ranging between 30 and 50 nm. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5442–5451, 2008     

Properties of polystyrene and polymethyl methacrylate copolymers of polyhedral oligomeric silsesquioxanes: A molecular dynamics study

Molecular dynamics simulations were carried out on copolymers of both styrene and methyl methacrylate with polyhedral oligomeric silsesquioxane (POSS) derivatives to identify the origin of the property changes imparted upon the chemical incorporation of POSS. Simulations were carried out on these hybrid copolymers and the parent homopolymers to elucidate the effect of the T₈, T₁₀, and T₁₂ POSS cages. These POSS comonomers were derivatized with a single polymerizable function and 7, 9, and 11 nonpolymerizable hydrocarbon moieties, respectively. Glass transition temperatures (T_g) were computed from specific volume versus temperature plots. The packing of POSS units around the polymer backbone was analyzed via their radial distribution functions. The effect of POSS on polymer motion was analyzed through the mean square displacement function. The improvements in the elastic moduli upon incorporation of POSS were computed by employing the static deformation method. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 234–248, 2006     

Synthesis of Diblock Copolymers With Cellulose Derivatives. 2. Characterization and Thermal Properties of Cellulose Triacetate-Block-Oligoamide-15

Well-defined A-block-B type cellulose derivatives consisting of cellulose triacetate (CTA) and oligoamide-15 were synthesized. Chemical structures of the diblock copolymers were characterized by MALDI-TOF MS, ¹H-NMR, and GPC. Influence of length of CTA and oligoamide-15 segments on their thermal properties was investigated by means of differential scanning calorimetry (DSC). All diblock copolymers displayed T _g, T _c, and T _m transition temperatures. Their T _g and T _m values increased with the increase of molecular weight of CTA segment. The crystallinity of diblock copolymers increased after isothermal crystallization at 200 °C. Its X-ray analysis revealed that the diblock copolymer had CTA II crystal structure. Thermal analysis supported microphase separation between CTA and oligoamide-15 segments at room temperature, because T _g and T _m values of polyamide-15 are −7 °C and 170–180 °C, respectively.     

Synthesis of novel cyclic olefin polymers with excellent transparency and high glass‐transition temperature via gradient copolymerization of bulky cyclic olefin and cis‐cyclooctene

Novel cyclic olefin polymers (COPs) with excellent transparency and high glass‐transition temperature (T_g) synthesized from bulky norbornene derivative, exo‐1,4,4a,9,9a,10‐hexahydro‐9,10(1',2')‐benzeno‐l,4‐methanoanthracene (HBMN), and cis‐cyclooctene (COE) by ring‐opening metathesis copolymerization utilizing the “first‐generation Grubbs” catalyst, RuCl₂(PCy₃)₂(CHPh), and subsequent hydrogenation was reported herein. To get amorphous copolymers, it was of great importance to control the feed ratios and the polymerization time for gradient copolymerization. All these copolymers showed very high T_gs (141.1–201.2 °C), which varied with the content of HBMN. The films of the gradient copolymers with only one T_g were highly transparent. On the contrary, all the block copolymers synthesized through sequential addition showed two thermal transition temperatures, T_g and melt temperature (T_m), and the films of these block copolymers were opaque. The mechanical performances of the COPs were also investigated. It is the first report that transparent COP could be prepared from bulky norbornene derivative and monocyclic olefin. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3240–3249     

Effects of chain microstructure of butadiene-isoprene copolymers on their glass transition and crystallization

<正>A series of butadiene-isoprene copolymers(BIR) with various compositions were synthesized with a neodymiumbased catalyst system.The microstructure,composition and sequence of copolymers were characterized by FTIR and ~(13)C-NMR spectroscopy.The crystallization behavior of the BIR copolymers was investigated by DSC analysis.The results demonstrate that the content of cis-1,4 configuration in both butadiene(Bd) and isoprene(Ip) units are around 98%when Bd content in feed(f_(Bd)) covering the range from 55.7 mol%to 96.0 mol%.The reactivity ratios of Bd and Ip were determined to be 1.40 and 0.48 respectively.The random copolymers of Bd and Ip show only one glass transition temperature(T_g) from -107.4℃to -80.5℃,which is dependent on the composition and fits nicely with Fox equation.The sequence distribution followed the first-order Markov statistical model.It is found that the copolymer chains with higher Bd content contain longer polybutadiene(PBd) segments,and the sequence length of PBd segments(N_(Bd)) exhibits great influence on the crystallization behavior of the copolymer.The copolymers with N_(Bd)≥11.8 could crystallize at low temperatures(-71℃to-43℃).The crystallization temperature and enthalpy values decreased gradually with decreasing N_(Nd).The copolymers with N_(Bd)≤7.9 are amorphous even at very low temperatures(0℃to-150℃) due to the short PBd segments.     

Synthesis and properties of poly(isobutyl methacrylate‐co‐butanediol dimethacrylate‐co‐methacryl polyhedral oligomeric silsesquioxane) nanocomposites

Poly[isobutyl methacrylate‐co‐butanediol dimethacrylate‐co‐3‐methacrylylpropylheptaisobutyl‐T8‐polyhedral oligomeric silsesquioxane] [P(iBMA‐co‐BDMA‐co‐MA‐POSS)] nanocomposites with different crosslink densities and different polyhedral oligomeric silsesquioxane (MA‐POSS) percentages (5, 10, 15, 20, and 30 wt %) were synthesized by radical‐initiated terpolymerization. Linear [P(iBMA‐co‐MA‐POSS)] copolymers were also prepared. The viscoelastic properties and morphologies were studied by dynamic mechanical thermal analysis, confocal microscopy, and transmission electron microscopy (TEM). The viscoelastic properties depended on the crosslink density. The dependence of viscoelastic properties on MA‐POSS content at a low BDMA loading (1 wt %) was similar to that of linear P(iBMA‐co‐MA‐POSS) copolymers. P(iBMA‐co‐1 wt % BDMA‐co‐10 wt % MA‐POSS) exhibited the highest dynamic storage modulus (E′) values in the rubbery region of this series. The 30 wt % MA‐POSS nanocomposites with 1 wt % BDMA exhibited the lowest E′. However, the E′ values in the rubbery region for P(iBMA‐co‐3 wt % BDMA‐co‐MA‐POSS) nanocomposites with 15 and 30 wt % MA‐POSS were higher than those of the parent P(iBMA‐co‐3 wt % BDMA) resin. MA‐POSS raised the E′ values of all P(iBMA‐co‐ 5 wt % BDMA‐co‐MA‐POSS) nanocomposites in the rubbery region above those of P(iBMA‐co‐5 wt % BDMA), but MA‐POSS loadings < 15 wt % had little influence on glass‐transition temperatures (T_g's) and slightly reduced T_g values with 20 or 30 wt % POSS. Heating history had little influence on viscoelastic properties. No POSS aggregates were observed for the P(iBMA‐co‐1 wt % BDMA‐co‐MA‐POSS) nanocomposites by TEM. POSS‐rich particles with diameters of several micrometers were present in the nanocomposites with 3 or 5 wt % BDMA. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 355–372, 2005     

Preparation,Tg improvement,and thermal stability enhancement mechanism of soluble poly(methyl methacrylate) nanocomposites by incorporating octavinyl polyhedral oligomeric silsesquioxanes

The soluble poly(methyl methacrylate‐co‐octavinyl‐polyhedral oligomeric silsesquioxane) (PMMA–POSS) hybrid nanocomposites with improved T_g and high thermal stability were synthesized by common free radical polymerization and characterized using FTIR, high‐resolution ¹H NMR, ²⁹Si NMR, GPC, DSC, and TGA. The POSS contents in the nanocomposites were determined based on FTIR spectrum, revealing that it can be effectively adjusted by varying the feed ratio of POSS in the hybrid composites. On the basis of the ¹H NMR analysis, the number of the reacted vinyl groups on each POSS molecules was determined to be about 6–8. The DSC and TGA measurements indicated that the hybrid nanocomposites had higher T_g and better thermal properties than the pure PMMA homopolymer. The T_g increase mechanism was investigated using FTIR, displaying that the dipole–dipole interaction between PMMA and POSS also plays very important role to the T_g improvement besides the molecular motion hindrance from the hybrid structure. The thermal stability enhances with increase of POSS content, which is mainly attributed to the incorporation of nanoscale inorganic POSS uniformly dispersed at molecular level. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5308–5317, 2007     

Synthesis of polystyrene-polysiloxane side-chain liquid crystalline block copolymers

The synthesis of a new liquid crystalline block copolymer consisting of a polystyrene block and a side-chain liquid crystalline siloxane block is reported. The synthetic approach described is based on the anionic polymerization of styrene and cyclic trimethyltrivinyltrisiloxane monomers, followed by functionalization of the siloxane block with side chain mesogens. The siloxane block has a T_g well below 25°C and is designed to exhibit a chiral smectic C^* phase at room temperature. These block copolymers are the first side-chain liquid crystalline block copolymers which contain both a high T_g glassy block and a low T_g liquid crystalline block.     

Preparation and properties of new random and block copolyamides derived from 1,3-bis(3-aminopropyl)tetramethyldisiloxane,aromatic diamines,and isophthaloyl chloride

Random and block disiloxane-containing copolyamides were prepared through one- and two-step procedures, respectively, by the low temperature solution polycondensation in chloroform containing triethylamine hydrochloride starting from 1,3-bis(3-aminopropyl)tetramethyldisiloxane, an aromatic diamine [3,4'-diaminodiphenyl ether (ODA) or m-phenylenediamine], and isophthaloyl chloride. The random copolyamides exhibited composition-dependent single glass transition temperature (T_g), and gave transparent and tough films by solution casting or hot pressing. The ODA-based block copolyamides had two T_g's, and the solvent-cast transparent films exhibited microphase separated morphology. The block copolymers gave better quality films than the single-phase random copolymers. © 1992 John Wiley & Sons, Inc.     

Thermal Degradation and Electrical Properties of Random and Block Piperazine Copolyamides

The thermal degradation of random and block copolymers of terephthaloyl trans-2,5-dimethylpiperazine/isophthaloyl trans-2,5-dimethylpiperazine were investigated in terms of rates, activation energies, degradation products, and electrical properties. The rates of degradation and the nature of the volatile degradation products indicate that both random and block copolymers follow a nearly random free-radical type of cleavage in vacuum with activation energies between 59 and 61 kcal/mole. In the temperature range 390=440°C, the block copolymers are significantly more stable in a vacuum (the rates of degradation are two to four times slower) than the random copolymers. In contrast to the random copolymers, the block copolymers showed only slight frequency dependence of their dielectric constants and dissipation factors between 0.1 and 100 kcps.     

Synthesis of repeating sequence copolymers of lactic,glycolic, and caprolactic acids

Repeating sequence copolymers of poly(lactic‐co‐caprolactic acid) (PLCA), poly(glycolic‐co‐caprolactic acid) (PGCA), and poly(lactic‐co‐glycolic‐co‐caprolactic acid) (PLGCA) have been synthesized by polymerizing segmers with a known sequence in yields of 50–85% with M_ns ranging from 18–49 kDa. The copolymers exhibited well‐resolved NMR resonances indicating that the sequence encoded in the segmers used in their preparation is retained and that transesterification is minimal. The exact sequences allowed for unambiguous assignment of the NMR spectra, and these standards were compared with the data previously reported for random copolymers. The glass transition temperatures (T_gs) of the PLCA and PGCA copolymers were found to depend primarily on monomer ratio rather than sequence. Sequence dependent T_gs were, however, noted for the PLGCA polymers with 1:1:1 L:G:C ratios; poly LGC and poly GLC exhibited T_gs that differed by nearly 8 °C. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Biocompatible polymeric systems: Copolymerization of 4-methacryloyloxy-acetanilide with 2-hydroxyethyl-methacrylate

Soluble copolymers of 4-methacryloyloxy-acetanilide (M), an acrylic derivative of paracetamol, with 2-hydroxyethyl-methacrylate (H) were prepared by free radical polymerization in DMF solution at 50°C, using 2,2′-azobisisobutyronitrile (AIBN) as initiator. The reactivity ratios of both monomers were determined by the application of conventional linearization methods suggested by Fineman-Ross and Kelen-Tudos. The results obtained make clear that this system copolymerizes at random with the reactivity ratios r_m = 2.15 ± 0.05 and r_H = 0.90 ± 0.10. The microstructure of copolymer chains is described on the basis of the first order Markov statistics. The copolymer glass transition temperatures were determined calorimetrically and the variation of T_g with the copolymer composition is discussed according to modern methods, considering the sequence distribution of monomeric units along the copolymer chains. Also the T_g of the corresponding homopolymers were determined giving the values of T_g(M) = 471 K and T_g(H) = 358 K.     

Acrylonitrile–4-vinylpyridine copolymers effect of comonomer sequence distribution on properties

Acrylonitrile–,4-vinylpyridine copolymers were prepared in chloroform solution at 60°C with AIBN as initiator. Copolymer compositions were determined from their 15.01-MHz ¹³C-NMR spectra. Reactivity ratios of r_AN = 0.093 and r_4VP = 0.32 were calculated by the Kelen and Tudos method. The run number, number-average sequence lengths, and monomer sequence distributions were also calculated. The T_g values of the copolymers, their dye uptake, and degree of alkaline hydrolysis were influenced by the overall copolymer composition but particularly by the monomer sequence distribution in the copolymers.