Enhanced optical limiting properties in suspensions of CdO nanowires

Optical limiting (OL) properties of CdO nanowires in water and ethanol were investigated by using nanosecond laser pulses at 532 nm. Experimental results show that suspension of CdO nanowires in ethanol exhibits better OL property than solution of C₆₀ in toluene and suspension of CdO nanowires in water. The dominant mechanism for the observed enhanced optical limiting in ethanol suspensions of CdO nanowires is due to nonlinear scattering.     

Influence of annealing temperature on microstructure and optical properties of sol-gel derived tungsten oxide films

Tungsten oxide (WO₃) thin films have been extensively studied for their interesting physical properties and a variety of potential applications in electrochromic devices. In order to explore the possibility of using these in electrochromic devices, a preliminary and thorough study of the optical properties of the host materials is an important step. Based on this, the influence of annealing temperature on the structural, surface morphological, optical and electrochromic properties has been investigated in the present work. The host material, WO₃ films, has been prepared from an ethanolic acetylated peroxotungstic acid sol containing 5 wt.% oxalic acid dehydrate (OAD) by sol-gel technique. The monoclinic structure and textured nature change of the films with the temperature increasing have been investigated by X-ray diffraction analysis. The surface morphology evolution of the films has been characterized by SEM. The shift in absorption edge towards the higher wavelength region observed from optical studies may be due to the electron scattering effects and the optical band filling effect that reveals the crystallization of the film. The amorphous film shows better optical modulation (ΔT = 76.9% at λ = 610 nm), fast color-bleach kinetics (t_c ∼ 4 s and t_b ∼ 9 s) and good reversibility (Q_b/Q_c = 90%), thereby rendering it suitable for smart window applications.     

Nonlinear optical properties of Au/ZnO nanoparticle arrays

The triangular-shaped Au/ZnO nanoparticle arrays were fabricated on fused quartz substrate using nanosphere lithography. The structural characterization of the Au/ZnO nanoparticle arrays was investigated by atomic force microscopy. The absorption peak due to the surface plasmon resonance of Au particles at the wavelength of about 570 nm was observed. The nonlinear optical properties of the nanoparticle arrays were measured using the z-scan method at a wavelength of 532 nm with pulse duration of 10 ns. The real and imaginary part of third-order nonlinear optical susceptibility, Re χ⁽³⁾ and Im χ⁽³⁾, were determined to be 1.15 × 10⁻⁶ and −5.36 × 10⁻⁷ esu, respectively. The results show that the Au/ZnO nanoparticle arrays have great potential for future optical devices.     

Influence of post-annealing on the properties of Sc-doped ZnO transparent conductive films deposited by radio-frequency sputtering

Sc-doped ZnO transparent conductive films are deposited on glass substrates by radio-frequency sputtering. The influence of post-annealing on the structural, morphologic, electrical, and optical properties of the films is investigated by energy dispersion X-ray spectroscopy, X-ray diffraction, Hall measurement, and optical transmission spectroscopy. The experimental results show that these films are polycrystalline with a preferred [0 0 1] orientation. The lowest resistivity of 2.6 × 10⁻⁴ Ω cm is obtained from the film annealed at 500 °C. The average optical transmittance of the films is over 90%. These results suggest that Sc-doped ZnO is a good candidate for fabricating high performance transparent conductive films.     

Nonlinear optical properties of periodic gold nanoparticle arrays

Periodic Au nanoparticle arrays were fabricated on silica substrates using nanosphere lithography. The identical single-layer masks were prepared by self-assembly of polystyrene nanospheres with radius R = 350 nm. The structural characterization of nanosphere masks and periodic particle arrays was investigated by atomic force microscopy. The nonlinear optical properties of the Au nanoparticle arrays were determined using a single beam z-scan method at a wavelength of 532 nm with laser duration of 55 ps. The results show that periodic Au nanoparticle arrays exhibit a fast third-order nonlinear optical response with the nonlinear refractive index and nonlinear absorption coefficient being n₂ = 6.09 × 10⁻⁶ cm²/kW and β = −1.87 × 10⁻⁶ m/W, respectively.     

Rapid thermal annealing effects on the structural and optical properties of ZnO films deposited on Si substrates

The structural and optical properties of ZnO films deposited on Si substrate following rapid thermal annealing (RTA) have been investigated by X-ray diffraction (XRD), atomic force microscopy (AFM), and photoluminescence (PL) measurements. After RTA treatment, the XRD spectra have shown an effective relaxation of the residual compressive stress, an increase of the intensity and narrowing of the full-width at half-maximum (FWHM) of the (0 0 2) diffraction peak of the as-grown ZnO film. AFM images show roughening of the film surface due to increase of grain size after RTA. The PL spectrum reveals a significant improvement in the UV luminescence of ZnO films following RTA at 800 °C for 1 min.     

Determination of the optimal wavelength for temperature independent detection of commercial gasoline with a polymer cladding optical fiber

An influence of temperature variations on transmission of a polymer cladding silica core (PCS) optical fiber was investigated in a wide spectral range covering the first (1710 nm) and the second (1170 nm) vibrational overtone bands of gasoline absorption. Thermo-induced changes of the fiber background transmittance have strong dependence on wavelength. A narrow wavelength band around 1214 nm was found to be almost free from the thermal effects while maintaining sufficient sensitivity for gasoline detection.     

Strong nonlinear optical refractive effect of self-assembled multilayer films containing tetrasulfonated iron phthalocyanine

Multilayer films containing anionic iron phthalocyanine tetrasulfonate (FePcTsNa₄) and cationic poly(diallydimethyl ammonium chloride) were prepared using electrostatic self-assembled layer-by-layer technique. The growth of the film was monitored by ultraviolet-visible absorption spectroscopy, and the morphology of the film was characterized by atomic force microscopy. Polarized visible spectra showed that macrocycles of FePcTsNa₄ in the film presented a flat orientation relative to the plane of the solid substrates. The third-order nonlinear optical properties of the film were studied by using Z-scan technique with laser duration of 21 ps at the wavelength of 532 nm. The FePcTsNa₄/PDDA film exhibited strong self-focusing effect with n₂ value of 4.13 × 10⁻¹⁵ m²/W, which is 4 orders larger than that of FePcTsNa₄ aqueous solution.     

Z-Scan studies of KYW, KYbW, KGW, and Ba(NO3)2 crystals

We present the studies of nonlinear refraction and nonlinear absorption in promising crystals which are extensively used in Raman lasers or as solid-state laser host materials: Ba(NO₃)₂, KGW, KYW, and KYbW. The single-beam z-scan technique with 1 ps laser pulses at 790 and 395 nm has been applied for the study. Nonlinear refraction-index intensity-coefficients and two-photon absorption coefficients have been determined for the crystals. The considerable enhancement of nonlinear refraction is observed in the crystals at 395 nm.     

Optical limiting behavior of Sudan III dye doped polymer

The optical limiting performance of Sudan III dye doped into ethylene propylene diene polymethylene polymer (EPDM) is investigated using 532 nm, 10 ns pulses from a frequency-doubled Nd-YAG laser. The optical limiting behavior is investigated by transmission measurement through the sample at different concentrations. Our results show that the optical limiting efficiency is concentration dependent.     

Thickness dependence of structural, electrical and optical properties of indium tin oxide (ITO) films deposited on PET substrates

Without intentionally heating the substrates, indium tin oxide (ITO) thin films of thicknesses from 72 nm to 447 nm were prepared on polyethylene terephthalate (PET) substrates by DC reactively magnetron sputtering with pre-deposition substrate surfaces plasma cleaning. The dependence of structural, electrical, and optical properties on the films thickness were systematically investigated. It was found that the crystal grain size increases, while the transmittance, the resistivity, and the sheet resistance decreases as the film thickness was increasing. The thickest film (∼447 nm) was found of the lowest sheet resistance 12.6 Ω/square, and its average optical transmittance (400-800 nm) and the 550 nm transmittance was 85.2% and 90.4%, respectively. The results indicate clearly that dependence of the structural, electrical, and optical properties of the films on the film thickness reflected the improvement of the film crystallinity with the film thickness.     

Luminescence properties of hierarchical CaMoO4 microspheres derived by ionic liquid-assisted process

Hierarchical calcium molybdate (CaMoO₄) nanostructured microspheres were synthesized via a facile room-temperature route assisted by an ionic liquid, 1-n-butyl-3-methylimidazolium chloride. The product was characterized by means of X-ray powder diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). It was found that micro-scaled CaMoO₄ powders were assembled by nanoparticles with diameters ranging from 10 to 20 nm. The optical absorbance, photoluminescence emission (PL), and luminescence excitation (PLE) were investigated. The PL spectra excited at 273 nm have a strong green emission band maximum at 511 nm, which is attributed to the charge-transfer transitions within the MoO₄²⁻ complex, and the luminescence intensity indicated a good luminescence quality of the CaMoO₄ materials. By varying the amount of this assisted agent, we found that the ionic liquid played a crucial role as a surfactant in the formation of CaMoO₄ materials with uniform hierarchical structure, which may be beneficial to the luminescence performance. This study presented a promising preparation strategy towards other luminescent materials.     

Ultra fast third-order non-linear response of amino-triazole donor-acceptor derivatives by optical Kerr effect

We report the study of the temporal dependence of the non-linear optical response of novel organic materials in solution. The experimental results of the optical Kerr gate using 70 fs pulses show a quasi-instantaneous response for three derivatives of an amino-triazole donor-acceptor system. The non-linearity of the compounds is identified as arising from the electronic contribution to the third-order non-linear susceptibility. The non-linear parameters of each sample were obtained using the optical Kerr response of CS₂ as reference.     

Optimization of a laser mitigation process in damaged fused silica

One of the major concerns encountered in high power laser is the laser-induced damage of optical components. This is a main issue of the development of the Europe's biggest laser, known as Laser Méga Joule (LMJ) especially in the section where the beam wavelength is 351 nm. This study deals with the development of a laser treatment process to improve the laser damage resistance of silica optical components. First, by irradiating the component at 355 nm in the nanosecond regime, defects of the silica optic are revealed and evolve as damage. Next, the damaged sites are irradiated with a CO₂ laser at a 10.6 μm wavelength in order to melt and evaporate the silica in the damage neighborhood. In this study, we performed a variation of the CO₂ laser parameters to obtain the most efficient stabilization. To check this stabilization, damage resistance tests were performed with an UV laser representative of the LMJ (at 355 nm/2.5 ns). The results show that we can stabilize weak points and thereby make the component resistant to subsequent UV laser irradiation.     

Room-temperature deposition of transparent conducting Al-doped ZnO films by RF magnetron sputtering method

Transparent conductive Al-doped zinc oxide (AZO) films with highly (0 0 2)-preferred orientation were deposited on quartz substrates at room temperature by RF magnetron sputtering. Optimization of deposition parameters was based on RF power, Ar pressure in the vacuum chamber, and distance between the target and substrate. The structural, electrical, and optical properties of the AZO thin films were investigated by X-ray diffraction, Hall measurement, and optical transmission spectroscopy. The 250 nm thickness AZO films with an electrical resistivity as low as 4.62 × 10⁻⁴ Ω cm and an average optical transmission of 93.7% in the visible range were obtained at RF power of 300 W, Ar flow rate of 30 sccm, and target distance of 7 cm. The optical bandgap depends on the deposition condition, and was in the range of 3.75-3.86 eV. These results make the possibility for light emitting diodes (LEDs) and solar cells with AZO films as transparent electrodes, especially using lift-off process to achieve the transparent electrode pattern transfer.     

Turbo-switched Mach-Zehnder interferometer performance as all-optical signal processing element at 160 Gb/s

Two variations of the active Mach-Zehnder interferometer (MZI) that incorporate the recently proposed turbo-switch effect are introduced to carry out three key functionalities in forthcoming high-speed optical telecommunication networks, namely, all-optical wavelength conversion, photonic XOR gating and optical time-division demultiplexing. Their performance is numerically investigated at 160 Gb/s using a sophisticated semiconductor optical amplifier (SOA) model. The more practical of the two proposed geometries shows error-free operation as XOR Boolean gate, low patterning as wavelength converter, and poor performance as demultiplexer. For comparison, results derived from well-accepted (or typical) schemes are also presented, and the role of the required extra SOAs as distinguishing elements of the new architectures is investigated.     

In vitro mineralization of surface-modified porous polycaprolactone scaffolds in simulated body fluid

Porous polycaprolactone (PCL) scaffolds were fabricated by combination of porogen-leaching and freeze-drying processes. Ice particulates were used as porogen materials. The porous PCL scaffolds were modified by potassium hydroxide solution with concentration of 1 mol/L at room temperature for 8 h, subsequently biomineralized in simulated body fluid for 2 h and 8 h, respectively. The microstructure and characteristics of the PCL scaffolds were investigated by scanning electron microscope (SEM) and EDS. The results showed (1) PCL scaffolds had high degree of connectivity and different pore sizes. (2) Plate-like apatite was observed on the surface of the scaffolds after being immersed into SBF for 8 h.     

Influence of the central metal atom on the nonlinear optical properties of MPcs solutions and thin films

Third order nonlinear optical susceptibility (χ^〈3〉) of metallophthalocyanines (MPcs, where M = Co, Cu, Zn, Mg) thin films and solutions was investigated by standard backward degenerate four wave mixing (DFWM) method at 532 nm. Third harmonic generation (THG) measurement at 1064 nm performed on MPcs thin films is also discussed. MPcs thin films were grown by conventional thermal evaporation in high vacuum and solution were dissolved in tetrahydrofuran (THF), in which the studied materials are soluble. In the case of microscopic nonlinearity, we calculated the second order hyperpolarizability (γ) for MPcs solutions. We found that the χ^〈3〉 and the γ values are affected by the nature of the central metal atom. We also found that the value is larger than that measured via THG experiment. The variation in χ^〈3〉 values occurs due to the different resonance contributions.     

Third-order optical nonlinearities of lead-free (Na1−xKx)0.5Bi0.5TiO3 thin films

(Na_1−xK_x)_0.5Bi_0.5TiO₃ (NKBT) (x = 0.1, 0.2, and 0.3) thin films with good surface morphology and rhombohedral perovskite structure were fabricated on quartz substrates by a sol-gel process. The fundamental optical constants (the band gaps, linear refractive indices and absorption coefficients) of the films were obtained through optical transmittance measurements. The nonlinear optical properties were investigated by Z-scan technique performed at 532 nm with a picosecond laser. A two-photon absorption effect closely related with potassium-doping content was found in thin films, and the nonlinear refractive index n₂ increases evidently with potassium-doping. The real part of the third-order nonlinear susceptibility χ⁽³⁾ is much larger than its imaginary part, indicating that the third-order optical nonlinear response of the NKBT films is dominated by the optical nonlinear refractive behavior. These results show that NKBT thin films have potential applications in nonlinear optics.     

Spectroscopic investigation of Tm:TeO2-WO3 glass

We studied the spectroscopic characteristics of telluride glass with the host composition (0.85)TeO₂-(0.15)WO₃, containing 0.25 and 1.0 mol% thulium oxide (Tm₂O₃). By analyzing the absorption spectra with the Judd-Ofelt theory, the average radiative lifetimes of 305±7.5 μs and 1.95±0.02 ms were determined for the ³F₄ and ³H₄ levels, respectively. Measured fluorescence lifetime of the ³F₄ level decreased from 218 to 51 μs for the 0.25 and 1.0 mol% Tm₂O₃ doped samples, respectively, indicating the effect of boosted non-radiative decay at higher doping concentrations. A similar trend was observed for the ³H₄ level, where the fluorescence lifetime decreased from 1.86 ms to 350 μs at these concentrations. The quenching of the 1460 nm (³F₄→³H₄) emission in favor of the 1800 nm (³H₄→³H₆) emission due to cross relaxation was further evident in the fluorescence spectra of the samples. The calculated stimulated emission cross sections (3.73±0.1×10⁻²¹ cm² at 1460 nm and 6.57±0.07×10⁻²¹ cm² at 1808 nm) reveal the potential importance of the Tm³⁺:(0.85)TeO₂-(0.15)WO₃ glass for applications in fiber-optic amplifiers and fiber lasers.