Amplifying Characteristics of Er3+/Yb3+ Co-Doped Parallel-Cascaded Double Microring Resonators

Abstract

In terms of the coupled mode theory, formulas of the transfer function and the output power gain are presented for an Er³⁺/Yb³⁺ co-doped parallel-cascaded double microring resonator. Around the pump wavelength of 0.98 μm and the central signal wavelength of 1.55 μm, analysis is performed for the dependence of the output power gain on the pump power, signal power, dopant concentration, amplitude coupling ratio, and ring spacing. The results show that the output power gain of this device is much larger than that of the Er³⁺/Yb³⁺ co-doped waveguide amplifier with identical waveguide lengths. In the case of the amplitude coupling ratio κ = 0.064, ring spacing L₂ = 10π R, pump power P_p0 = 8 mW, signal power P_s0 = 37.2 μW, Er³⁺ ion concentration N_Er = 1 × 26 m^?3, and Yb³⁺ ion concentration N_Yb = 3 × 27 m^?3, the device can produce higher signal power gain from 11.9 dB even up to 70 dB.     

A numerical method for solving gain characteristics of Er/Yb codoped waveguide amplifiers

By means of the interpolation and iteration methods to deal with the rate equations and the light propagation equations for the Er³⁺/Yb³⁺ codoped waveguide amplifier (EYCDWA), the gain characteristics in the forward, backward, and bidirectional pumped styles are analyzed. In order to obtain high gain, some parameters such as waveguide length, dopant concentration, pump power, and signal power are optimized. The results show that the pump power and signal power are about 50 mW and 1 mW, respectively, the gain is about 6.5 dB for the 2.0 cm-long EYCDWA with an Er³⁺ ion concentration of 1.5 × 10²⁶ m^–3 and Yb³⁺ ion concentration of 1.9 × 10²⁷ m^–3. Moreover, the upconversion is investigated for the designed device.     

Wavelength tunable linear cavity cladding pump Er<Superscript>3+</Superscript>/Yb<Superscript>3+</Superscript>co-doped fiber laser operating in L-band

We have demonstrated a novel tunable linear cavity Er³⁺/Yb³⁺ co-doped fiber laser, which utilizes amplified spontaneous emission as a secondary pump source so that it can operate in L-band. The tuning wavelength range can be up to 34 nm, from 1588.6 to 1622.6 nm, and the output power excursion of the laser at different wavelengths can be less than 0.4 dB by using a two sections of high-birefringence fiber loop mirror as the wavelength filter. The high output power of 200 mW is realized by using the cladding-pump.     

Numerical analysis of amplification characteristics of ErxY2 − xSiO5

The gain characteristics of Er_xY_2 − xSiO₅ waveguide amplifiers have been investigated by solving rate equations and propagation equations. The gain at 1.53 μm as a function of waveguide length, Er³⁺ concentration and pump power is studied pumping at three different wavelengths of 654 nm, 980 nm and 1480 nm, respectively. The optimum Er³⁺ concentrations of 1 × 10²¹ cm^− 3-2 × 10²¹ cm^− 3 with the high gain are obtained for all three pump wavelengths. Pumping at 654 nm wavelength is shown to be the most efficient one due to weak cooperative upconversion. A maximum 16 dB gain at 1 mm waveguide length under a 30 mW pump with Er³⁺ concentration of 1 × 10²¹ cm^− 3 is demonstrated pumping at 654 nm wavelength.     

Optical character of Er/Yb co-doped P2O5-CaO-Na2O-Al2O3-AgO phosphate glass

The up-conversion (UC) and near infrared (NIR) luminescence of Er³⁺/Yb³⁺ co-doped phosphate glass are investigated. In the UC emission range, the 523 nm, 546 nm green emissions and the 659 nm red emission are observed. With the increasing pump power, the intensity ratios of I₅₂₃/I₆₅₉, I₅₄₆/I₆₅₉ and I₅₂₃/I₅₄₆ increase gradually. The phenomenon is reasonably interpreted by theoretical analysis based on steady state rate equations. The emission cross section of the infrared emission at 1546 nm is larger (about 6.7 × 10^− 21 cm²), which is suitable for making fiber amplifier.     

Numerical investigation of gain characteristics of Er3+/Yb3+ co-doped fiber amplifiers

In this work, a model for analyzing the gain characteristics of heavily Er³⁺/Yb³⁺ co-doped compact fiber amplifier is presented. Four-level rate equations and finite-difference beam propagation method are applied to simulate the optical field evolution along the active fiber. Based on this model, the influences of ion concentration, fiber length and pump power on the gain characteristics of Er³⁺/Yb³⁺ co-doped phosphate glass fiber amplifiers are theoretically investigated. Numerical results show that for a fiber length of 3.6 cm the internal gain can reach 27.2 dB with N _Er = 2.6 × 10²⁶ ions/m³ and N _Yb = 1.2 × 10²⁷ ions/m³ when pumped with 224 mW at 980 nm. The gain per centimeter is 7.56 dB/cm. The results can provide useful information to optimize the gain performance of these compact fiber amplifiers.     

Upconverted VUV luminescence of Nd and Er doped into LiYF4 crystals under XeF-laser excitation

The upconverted VUV (185 nm) and UV (230 and 260 nm) luminescence due to 5d-4f radiative transitions in Nd³⁺ ions doped into a LiYF₄ crystal has been obtained under excitation by 351/353 nm radiation from a XeF excimer laser. The maximum upconversion efficiency, defined as the ratio of intensity for 5d-4f luminescence to overall intensity for 5d-4f and 4f-4f luminescence from the ⁴D_3/2 Nd³⁺ level, has been estimated to be about 70% under optimal focusing conditions for XeF laser radiation. A redistribution of intensity between three main components of 5d-4f Nd³⁺ luminescence is observed under changing the excitation power density, which favors the most long-wavelength band (260 nm) at higher excitation density level. The effect is interpreted as being due to excited state absorption of radiation emitted. The upconverted VUV and UV luminescence from the high-lying ²F(2)_7/2 4f level of Er³⁺ doped into a LiYF₄ crystal has also been obtained under XeF-laser excitation the most intense line being at 280 nm from the spin-allowed transition to the ²H(2)_11/2 4f level of Er³⁺, but the efficiency of upconversion for Er³⁺ emission is low, less than 5%.     

Broadband Er-Yb co-doped superfluorescent fiber source

In this paper, extensive experimental results on broad-band double cladding Er³⁺-Yb³⁺ co-doped superfluorescent fiber sources (SFSs), characterizing their output power, mean wavelength, and bandwidth (BW) stability with variations of pump power, pump wavelength, and fiber temperature, have been reported. For a 55-cm fiber, SFS power from 3.7755 (maximum BW condition of more than 80 nm) to 9.1837 mW (maximum power condition, BW is about 34 nm) has been achieved. The SFS mean wavelength dependence on pump wavelength is highly pump temperature sensitive, and can be reduced to zero in a chosen pump temperature field. The intrinsic variation of the SFS mean wavelength λ_m with fiber temperature is also measured, and a linear variation from 15 to 45 °C with a slop of −0.053 nm/°C for L_f = 100 cm and −0.04 nm/°C for L_f = 55 cm is found.     

Up-conversion photoluminescence characteristics of Yb3+:Er3+:Tm3+ co-doped borosilicate glasses

Yb3+:Er3+:Tm3+ co-doped borosilicate glasses are prepared.Their strong up-conversion photoluminescence spectra in a range from ultra-violet to near-infrared,which are excited by a 978-nm laser diode,are measured,and the mechanisms of energy transfer among Yb3+,Er3+ and Tm3+ ions are discussed.The results show that there is an unexpected wavelength at 900-nm emission from Yb3+ Stark splitting levels to pump Tm3+ ions and there exists an optimum pump power.The concentration of the Tm3+ dopant gives rise to a prominent effect on the intensity of visible and near-infrared emissions for the Yb3+:Er3+:Tm3+ co-doped borosilicate glasses.     

Spectral beam combining of fiber lasers based on a transmitting volume Bragg grating

Based on the principle of spectral beam combining using a transmitting volume Bragg grating, a simple experimental setup was designed, in which an approach to control the incidence angles of beams using a focusing lens is presented. The experimental results for the spectral beam combining of two fiber lasers are reported. The gain media used in this experiment were large-mode area Er³⁺/Yb³⁺ co-doped double-clad fibers, pumped by semiconductor lasers. The output powers of the two fiber lasers were 0.39 and 0.53 W, respectively. With a grating diffraction efficiency of about 60%, a maximum combined power of 0.64 W with an absolute combining efficiency of about 69.6% was achieved.     

全光纤超短脉冲掺Yb3+光纤环形激光器

讨论了自启动被动锁模掺Yb³⁺光纤环形激光器产生短脉冲的机理，并研制出全光纤结构超短脉冲掺Yb³⁺光纤环形激光器.采用两个976nm半导体激光器级联抽运作为抽运源，高掺杂浓度掺Yb³⁺光纤作为增益介质，利用光纤的非线性偏振旋转效应，得到自启动、十分稳定的ps量级锁模光脉冲.激光器锁模阈值功率260mW，输出功率25mW，锁模光脉冲中心波长1056nm，3dB带宽11.7nm，重复频率20MHz.与其他结构光纤激光器相比，这种全光纤结构具有更高的效率和更好的稳定性. 关键词： 环形光纤激光器 3+光纤')" href="#">高掺杂浓度掺Yb³⁺光纤 自启动 被动锁模     

Infrared-excited bright green and red luminescence in La3Ga5.5Ta0.5O14 doped with erbium and ytterbium

Bright green (at 525 and 550 nm) and red (at 660 nm) luminescence in Er:Yb:La₃Ga_5.5Ta_0.5O₁₄ (LGT) powder synthesized by solid state reaction was obtained by pumping at 936 nm. Yb³⁺-Er³⁺ energy transfer processes accounting for population of the ²H2_11/2, ⁴S_3/2 and ⁴F_9/2 Er³⁺ levels are discussed. The dependence of ratio between the intensities of the green and red luminescence on pump intensity is analyzed. The rather high quantum efficiency (58%) of the (⁴S_3/2, ²H2_11/2) Er³⁺ emitting level recommends LGT doped with erbium and ytterbium for upconversion applications.     

Luminescent properties of (Y,Gd)BO3:Bi,RE (RE=Eu, Tb) phosphor under VUV/UV excitation

Bi³⁺- and RE³⁺-co-doped (Y,Gd)BO₃ phosphors were prepared and their luminescent properties under vacuum ultraviolet (VUV)/UV excitation were investigated. Strong red emission for (Y,Gd)BO₃:Bi³⁺,Eu³⁺ and strong green emission for (Y,Gd)BO₃:Bi³⁺,Tb³⁺ are observed under VUV excitation from 147 to 200 nm with a much broader excitation region than that of single Eu³⁺-doped or Tb³⁺-doped (Y,Gd)BO₃ phosphor. Strong emissions are also observed under UV excitation around 265 nm where as nearly no luminescence is observed for single Eu³⁺-doped or Tb³⁺-doped (Y,Gd)BO₃. The luminescence enhancement of Bi³⁺- and RE³⁺-co-doped (Y,Gd)BO₃ phosphors is due to energy transfer from Bi³⁺ ion to Eu³⁺ or Tb³⁺ ion not only in the VUV region but also in the UV region. Besides, host sensitization competition between Bi³⁺ and Eu³⁺ or Tb³⁺ is also observed. The investigated phosphors may be preferable for devices with a VUV light 147-200 nm as an excitation source such as PDP or mercury-free fluorescent lamp.     

Infrared-to-visible upconversion in Er and Er/Yb activated Sb2O4 nanopowders prepared by sol-gel route

We prepared Er³⁺ doped and Er³⁺/Yb³⁺ codoped Sb₂O₄ nanocrystals by the sol-gel method. The Raman, X-ray diffraction (XRD), transmission electron microscope (TEM), and photoluminescence spectra of the samples were studied. The phonon energy of the Sb₂O₄ nanocrystals is very low (the maximum value being 461 cm⁻¹). The upconversion (UC) red emission of the Er³⁺/Yb³⁺ codoped sample is very strong at 975 nm laser diode excitation. The Sb₂O₄ nanocrystals will be a promising luminous material.     

Effects of pumped styles on power conversion efficiency and gain characteristics of phosphate glass Er3+–Yb3+-co-doped waveguide amplifiers

In order to analyze the power conversion efficiency (PCE) and the gain characteristics of the phosphate glass Er³⁺–Yb³⁺-co-doped waveguide amplifier (EYCDWA), formulas are derived from the rate equations and the light propagation equations under the uniform dopant and the steady-state conditions. In the derivation of these formulas, we have neglected the amplified spontaneous emission (ASE) and have introduced the initial energy transfer efficiency. By using these formulas, the effects of the pump power, signal power and waveguide length on the PCE and the gain characteristics of the EYCDWA are analyzed, and some useful results are obtained in three kinds of pumped styles, i.e. the forward-, backward- and bidirectional pumped styles.     

Energy transfer and infrared-to-visible upconversion luminescence of Er/Yb-codoped halide modified tellurite glasses

We report on the energy transfer and frequency upconversion spectroscopic properties of Er³⁺-doped and Er³⁺/Yb³⁺-codoped TeO₂-ZnO-Na₂O-PbCl₂ halide modified tellurite glasses upon excitation with 808 and 978 nm laser diode. Three intense emissions centered at around 529, 546 and 657 nm, alongwith a very weak blue emission at 410 nm have clearly been observed for the Er³⁺/Yb³⁺-codoped halide modified tellurite glasses upon excitation at 978 nm and the involved mechanisms are explained. The quadratic dependence of fluorescence on excitation laser power confirms the fact that the two-photon contribute to the infrared to green-red upconversion emissions. And the blue upconversion at 410 nm involved a sequential three-photon absorption process.     

Up-conversion white light of Tm/Er/Yb tri-doped CaF2 phosphors

Tm³⁺/Er³⁺/Yb³⁺ tri-doped CaF₂ phosphors were synthesized using a hydrothermal method. The phosphors were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), and up-conversion (UC) emission spectra. After annealing, the phosphors emitted white light under a 980 nm continuous wave diode laser (CW LD 2 W) excitation. As the excitation power density changed in the range of 20-260 W/cm², the chromaticity coordinates of the UC light of the phosphor Ca_0.885Tm_0.005Er_0.01Yb_0.1F₂ fell well in the white region of the 1931 CIE diagram. For the proportion of red, green and blue (RGB) in white light is strict, key factors for achieving UC white light, such as host materials, rare earth ions doping concentrations, annealing temperatures, as well as the excitation power densities, were investigated and discussed.     

掺钕保偏光纤放大器的研究

对掺钕双包层光纤放大器中抽运光和信号光沿光纤传播的功率分布进行了数值模拟,以808nm半导体激光器为抽运源,掺钕双包层保偏光纤为增益介质,对种子注入主振荡光纤放大器进行了理论分析和实验研究.利用实验室自制的皮秒锁模激光器为种子源,注入1064nm皮秒锁模脉冲,获得了稳定的放大脉冲.小信号时的放大倍数为300（增益为25dB）,获得了平均功率5W的皮秒脉冲.同时利用TDS5104型示波器探测信号光放大前后的波形,并用光谱分析仪得到输出脉冲激光的光谱图. 关键词： 光纤放大器 掺钕保偏光纤 种子注入 反向抽运     

Gain characteristics of 980 nm-pumped Er<Superscript>3+</Superscript>–Tm<Superscript>3+</Superscript>–Pr<Superscript>3+</Superscript>-co-doped fiber

We present a numerical model of Er³⁺–Tm³⁺–Pr³⁺-co-doped fiber amplifier pumped with 980 nm laser for the first time, to the best of our knowledge. The rate and power propagation equations are solved numerically to analyze the effects of the pump power and active ion concentrations on the gains at 1310, 1470, 1530, 1600, 1650 nm windows. The results show that with pump power of 200 mW and when Pr³⁺, Tm³⁺, Er³⁺ concentrations are around 2.0×10²⁴, 3.0×10²⁴, 1.5×10²⁴ (ions/m³), respectively, the signals at 1470, 1530, 1600 nm may be nearly equally amplified with gain of 11–12.0 dB in the active fiber with length of 11.0 m, and the signals at 1310, 1470 and 1600 nm windows may be nearly equally amplified with gain of 12.0 dB in the active gain medium with length of 15.0 m. With pump power of 300 mW, the signals at 1470, 1530, 1600 nm may be nearly equally amplified with a gain of 16.0 dB in the active medium with a length of 15.0 m.     

Enhanced optical activation of Er in Er-doped Al2O3 powders by Y codoping in a sol-gel method

Enhanced photoluminescence (PL) mechanism of Er³⁺-doped Al₂O₃ powders by Y³⁺ codoping at wavelength 1.53 μm has been investigated through PL measurements of 0.1 mol% Er³⁺- and 0-20 mol% Y³⁺-codoped Al₂O₃ powders prepared at a sintering temperature of 900 °C in a non-aqueous sol-gel method. PL intensity and lifetime of Er³⁺-Y³⁺-codoped Al₂O₃ powders composed of γ-(Al,Er,Y)₂O₃ and θ-(Al,Er,Y)₂O₃ phases increased with increasing Y³⁺-codoping concentration. The 10-20 mol% Y³⁺ codoping in 0.1 mol% Er³⁺-doped Al₂O₃ powders intensified the PL intensity by about 20 times, with a PL lifetime prolonged from 3.5 to 5.8 ms. A maximal increase of the optical activity of Er³⁺ in 0.1 mol% Er³⁺-Y³⁺-codoped Al₂O₃ powders about one order was achieved by 10-20 mol% Y³⁺ codoping. It is found that the improved PL properties for Er³⁺-Y³⁺-codoped Al₂O₃ powders are mainly attributed to enhanced optical activation of Er³⁺ in the Al₂O₃ by Y³⁺ codoping, and to the slightly increased radiative quantum efficiency of Er³⁺ in the Al₂O₃.