Theoretical investigation of structural stability and lattice vibrations of U6Fe16Si7 and its interstitial carbide U6Fe16Si7C

A series of lattice inversion pair potentials are used to evaluate the phase stability and site preference for uranium intermetallics U₆Fe₁₆Si₇ and its interstitial carbide U₆Fe₁₆Si₇C. The calculated preferentially occupation site of the Si atom is found to be the 4a site. Interstitial C atom can only be located on the 4b site. Calculated lattice constants are found to agree with a report in the literature. It is noted that the total and partial phonon densities of states are first evaluated for the U₆Fe₁₆Si₇ and U₆Fe₁₆Si₇C compounds. The analysis for the inverted potentials explains qualitatively the contributions of different atoms to the vibrational modes.     

Enhanced quantum yield of yellow photoluminescence of Dy ions in nonlinear optical Ba2TiSi2O8 nanocrystals formed in glass

Transparent crystallized glasses consisting of nonlinear optical Ba₂TiSi₂O₈ nanocrystals (diameter: ∼100 nm) are prepared through the crystallization of 40BaO-20TiO₂-40SiO₂-0.5Dy₂O₃ glass (in the molar ratio), and photoluminescence quantum yields of Dy³⁺ ions in the visible region are evaluated directly by using a photoluminescence spectrometer with an integrating sphere. The incorporation of Dy³⁺ ions into Ba₂TiSi₂O₈ nanocrystals is confirmed from the X-ray diffraction analyses. The total quantum yields of the emissions at the bands of ⁴F_9/2→⁶H_15/2 (blue: 484 nm), ⁴F_9/2→⁶H_13/2 (yellow: 575 nm), and ⁴F_9/2→⁶H_11/2 (red: 669 nm) in the crystallized glasses are ∼15%, being about four times larger compared with the precursor glass. It is found that the intensity of yellow (575 nm) emissions and the branching ratio of the yellow (575 nm)/blue (484 nm) intensity ratio increase largely due to the crystallization. It is suggested from Judd-Ofelt analyses that the site symmetry of Dy³⁺ ions in the crystallized glasses is largely distorted, giving a large increase in the yellow emissions. It is proposed that Dy³⁺ ions substitute Ba²⁺ sites in Ba₂TiSi₂O₈ nanocrystals.     

Atomistic simulation on the site preference and mechanical properties of Th3Co4+xAl12−x and U3Co4+xAl12−x

An atomistic study is presented on the phase stability, site preference and lattice constants of the actinide intermetallic compounds Th₃Co_4+xAl_12−x and U₃Co_4+xAl_12−x. Calculations are based on a series of interatomic pair potentials related to the actinides and transition metals, which are obtained by a strict lattice inversion method. The lattice constants of Th₃Co_4+xAl_12−x and U₃Co_4+xAl_12−x are calculated for different values of x. The site preference of Co atoms at Al sites is also evaluated and the order is given as 6h, 4f, 2b and 12k for Th₃Co_4+xAl_12−x, and 6h, 4f, 12k and 2b for U₃Co_4+xAl_12−x. In addition, some simple mechanical properties such as the elastic constants and bulk modulus are investigated for the actinide compounds with complex structures.     

Synthesis and Structure of Ba8Cu3In4N5 with Nitridocuprate Groups and One-Dimensional Infinite Indium Clusters

Single crystals of the quaternary compound Ba₈Cu₃In₄N₅ were prepared by heating Ba, Cu, and In in a Na flux at 1023 K under 7 MPa of N₂, and by slow cooling from this temperature. The crystal structure was analyzed by single-crystal X-ray diffraction. It crystallizes in an orthorhombic cell (space group Immm (No. 71), Z=2) with a=4.0781(6), b=12.588(2), and c=19.804(3) Å at 298 K. The structural formula is expressed as Ba₈[CuN₂]₂ [CuN]In₄. Nitridocuprates of one-dimensional chains ¹_∞[CuN_2/2] and isolated units ⁰[CuN₂], and one-dimensional indium clusters ¹_∞[In₂In_4/2] are contained in the structure. A split-site model applied for the arrangement of ¹_∞[CuN_2/2] chains suggested that there is a short-bond, long-bond alternation of the Cu-N bondings. The electrical resistivity of Ba₈Cu₃In₄N₅ was 3.44 mΩ·cm at 298 K. A metallic temperature dependence of the resistivity was observed down to 10 K.     

Phase stability and chemical composition dependence of the thermoelectric properties of the type-I clathrate Ba8AlxSi46−x (8≤x≤15)

Phase stability of the type-I clathrate compound Ba₈Al_xSi_46−x and the thermoelectric property dependence on chemical composition are presented. Polycrystalline samples were prepared by argon arc melting and annealing. Results of powder X-ray diffraction and electron microprobe analysis show that the type-I structure is formed without framework deficiency for 8≤x≤15. Lattice constant a increases linearly with the increase of x. Thermoelectric properties were measured for x=12, 14 and 15. The Seebeck coefficients are negative, with the absolute values increasing with x. The highest figure of merit zT=0.24 was observed for x=15 at T=1000 K, with carrier electron density n=3×10²¹ cm⁻³. A theoretical calculation based on the single parabolic band model reveals the optimum carrier concentration to be n∼4×10²⁰ cm⁻³, where zT∼0.7 at T=1000 K is predicted.     

Local structure of Cu in Cs8Na16Cu5Ge131 type II clathrate

We have used X-ray absorption spectroscopy (XAS) to investigate the local structure of Cu and Ge in the Cs₈Na₁₆Cu₅Ge₁₃₁ type II clathrate. We show that the local structure parameters for Ge (coordination number and distances) are consistent with those derived on the basis of XRD investigation of Cs₈Na₁₆Ge₁₃₆. The EXAFS data suggest that Cu either randomly substitutes for Ge on the clathrate framework or preferentially on the 96g site but not preferentially on the 32e or 8a sites (Wyckoff notation). Furthermore, we find that the Cu-Ge distance is smaller than the Ge-Ge distance by 0.13 Å, indicating a local distortion around the Cu atoms. The estimated degrees of disorder for Cu-Ge and Ge-Ge interactions indicate the Cu-Ge clathrate framework to be relatively stiff, while those for Na-Ge and Cs-Ge interactions corroborate previous observations of strong thermal disorder of the alkali guests in these materials. Our XAS results offer insight into the site substitution of Cu in this material, information unattainable from X-ray diffraction due to the lack of scattering contrast between Cu and Ge.     

Yb3Cu6Sn5, Yb5Cu11Sn8 and Yb3Cu8Sn4: crystal structure of three ordered compounds

Yb₃Cu₆Sn₅, Yb₅Cu₁₁Sn₈ and Yb₃Cu₈Sn₄ compounds were prepared in sealed Ta crucibles by induction melting and subsequent annealing. The crystal structures of Yb₃Cu₆Sn₅ and Yb₅Cu₁₁Sn₈ were determined from single crystal diffractometer data: Yb₃Cu₆Sn₅, isotypic with Dy₃Co₆Sn₅, orthorhombic, Immm, oI28, a=4.365(1) Å, b=9.834(3) Å, c=12.827(3) Å, Z=2, R=0.019, 490 independent reflections, 28 parameters; Yb₅Cu₁₁Sn₈ with its own structure, orthorhombic, Pmmn, oP48, a=4.4267(6) Å, b=22.657(8) Å, c=9.321(4) Å, Z=2, R=0.047, 1553 independent reflections, 78 parameters. Both compounds belong to the BaAl₄-derived defective structures, and are closely related to Ce₃Pd₆Sb₅ (oP28, Pmmn). The crystal structure of Yb₃Cu₈Sn₄, isotypic with Nd₃Co₈Sn₄, was refined from powder data by the Rietveld method: hexagonal, P6₃mc, hP30, a=9.080(1) Å, c=7.685(1) Å, Z=2, R_wp=0.040. It is an ordered substitution derivative of the BaLi₄ type (hP30, P6₃/mmc). All compounds show strong Cu-Sn bonds with a length reaching 2.553(3) Å in Yb₅Cu₁₁Sn₈.     

Crystal structure, characterization and thermoelectric properties of the type-I clathrate Ba8−ySryAl14Si32 (0.6≤y≤1.3) prepared by aluminum flux

The title compound was prepared as single crystals using an aluminum flux technique. Single crystal and powder X-ray diffraction indicate that this composition crystallizes in the clathrate type-I structure, space group Pm3?n. Electron microprobe characterization indicates the composition to be Ba_8−ySr_yAl_14.2(2)Si_31.8(2) (0.77<y<1.3). Single-crystal X-ray diffraction data (90 and 12 K) were refined with the Al content fixed at the microprobe value (12 K data: R₁=0.0233, wR₂=0.0441) on a crystal of compositions Ba. The Sr atom preferentially occupies the 2a position; mixed Al/Si occupancy was found on all framework sites. These refinements are consistent with a fully occupied framework and nearly fully occupied cation guest sites as found by microprobe analysis. Temperature dependent electrical resistivity and thermal conductivity have been measured from room temperature to 1200 K on a hot-pressed pellet. Electrical resistivity reveals metallic behavior. The negative Seebeck coefficient indicates transport processes dominated by electrons as carriers. Thermal conductivity is between 22 and 25 mW/cm K. The sample shows n-type conductivity with a maximum figure of merit, zT of 0.3 at 1200 K. A single parabolic band model predicts a five-fold increase in zT at 800 K if carrier concentration is lowered.     

Relations of crystal structure to magnetic properties in the quasi-one-dimensional compound PbNi1.88Mg0.12V2O8

The crystal structure of the quasi-one-dimensional oxide PbNi_1.88Mg_0.12V₂O₈ has been studied by Rietveld analysis of combined high-resolution neutron and X-ray powder diffraction data at 300 K and at low temperatures. The (Ni/Mg)O₆ octahedral units share a common edge and form spiral chains along the c-axis of the tetragonal unit cell, without deviating the I4₁cd (Z=8) symmetry upon cooling. DC magnetic susceptibility measurements show that the system undergoes a magnetic phase transition below T_N≅3.4 K. Rietveld analysis of the medium resolution neutron powder diffraction data confirms that impurity-induced antiferromagnetic order (with propagation vector, ) takes over from the Haldane ground state of the parent compound. The power-law [β=0.31(3)] temperature evolution of the strongest magnetic Bragg peak intensity indicates three-dimensional Ising-type magnetic interactions, while the reduced magnitude of the Ni²⁺ moment [〈μ〉=0.98(3) μ_B] suggests important zero-point spin fluctuations. Structural considerations are consistent with small changes in the interatomic distances around the bridging tetrahedral VO₄ entities separating the chains. However, no bulk structural phase transition concurrent to the Néel ordering is found. We show that the modification of intra- and inter-chain Ni-Ni distances upon cooling promotes the magnetic coupling of the end-of-chain liberated S=1/2 spins and leads to antiferromagnetic ordering.     

Preparation of the cubic-type La2O3 phase by thermal decomposition of LaI3

Cubic lanthanum oxide was prepared by the oxidation of lanthanum iodide at 700 °C in air atmosphere. The oxide was characterized by X-ray fluorescence analysis, X-ray diffraction, and Fourier-transformed infrared spectroscopy. The cubic La₂O₃ is most likely a single lanthanum oxide phase containing periodate hydrate and hydroxycarbonate species. The cubic lanthanum oxide is found to be chemically stable even if they are dispersed in water because of the presence of hydroxycarbonate and periodate hydrate species which inhibit the bulk hydroxylation.     

Microwave-Assisted Elemental-Direct-Reaction Route to Nanocrystalline Copper Sulfides Cu9S8 and Cu7S4

Non-stoichiometric copper sulfides Cu₉S₈ and Cu₇S₄ nanocrystallites were synthesized by the reaction between elements S and Cu under microwave radiation for several minutes. The products were analyzed by using XRD, TEM, XPS, ICP and PL.     

The new hydrides CeNiGeH1.6 and CeCuGeH1.0 crystallizing in the derivative hexagonal ZrBeSi-type structure

The ternary germanides CeNiGe and CeCuGe absorb hydrogen in the temperature range 393-473 K. X-ray powder diffraction and transmission electron microscopy show that the hydride CeNiGeH_1.6(1) adopts the hexagonal ZrBeSi-type whereas CeCuGeH_1.0(1) crystallizes in a superstructure of this type. Magnetization, electrical resistivity and thermopower measurements reveal that CeNiGeH_1.6(1) is an intermediate valence compound having a Kondo temperature ≅220(10) K smaller than that observed ≅600(20) K for CeNiGe. On the contrary, a transition from ferromagnetism to non-magnetic ordering above 1.8 K is evidenced during the hydrogenation of CeCuGe.     

Synthesis, structure and properties of new chain cuprates, Na3Cu2O4 and Na8Cu5O10

Na₃Cu₂O₄ and Na₈Cu₅O₁₀ were prepared via the azide/nitrate route from stoichiometric mixtures of the precursors CuO, NaN₃ and NaNO₃. Single crystals have been grown by subsequent annealing of the as prepared powders at 500 °C for 2000 h in silver crucibles, which were sealed in glass ampoules under dried Ar. According to the X-ray analysis of the crystal structures (Na₃Cu₂O₄: P2₁/n, Z=4, a=5.7046(2), b=11.0591(4), c=8.0261(3) Å, β=108.389(1)°, 2516 independent reflections, R₁(all)=0.0813, wR₂ (all)=0.1223; Na₈Cu₅O₁₀: Cm, Z=2, a=8.228(1), b=13.929(2), , β=111.718(2)°, 2949 independent reflections, R₁(all)=0.0349, wR₂ (all)=0.0850), the main feature of both crystal structures are CuO₂ chains built up from planar, edge-sharing CuO₄ squares. From the analysis of the Cu-O bond lengths, the valence states of either +2 or +3 can be unambiguously assigned to each copper atom. In Na₃Cu₂O₄ these ions alternate in the chains, in Na₈Cu₅O₁₀ the periodically repeated part consists of five atoms according to Cu^II-Cu^II-Cu^III-Cu^II-Cu^III. The magnetic susceptibilities show the dominance of antiferromagnetic interactions. At high temperatures the compounds exhibit Curie-Weiss behaviour (Na₃Cu₂O₄: , , Na₈Cu₅O₁₀: , , magnetic moments per divalent copper ion). Antiferromagmetic ordering is observed to occur in these compounds below 13 K (Na₃Cu₂O₄) and 24 K (Na₈Cu₅O₁₀).     

Synthesis, crystal structure, infrared and Raman spectra of Sr4Cu3(AsO4)2(AsO3OH)4·3H2O and Ba2Cu4(AsO4)2(AsO3OH)3

The two new compounds, Sr₄Cu₃(AsO₄)₂(AsO₃OH)₄·3H₂O (1) and Ba₂Cu₄(AsO₄)₂(AsO₃OH)₃(2), were synthesized under hydrothermal conditions. They represent previously unknown structure types and are the first compounds synthesized in the systems SrO/BaO-CuO-As₂O₅-H₂O. Their crystal structures were determined by single-crystal X-ray diffraction [space group C2/c, a=18.536(4) Å, b=5.179(1) Å, c=24.898(5) Å, β=93.67(3)°, V=2344.0(8) Å³, Z=4 for 1; space group P4₂/n, a=7.775(1) Å, c=13.698(3) Å, V=828.1(2) Å³, Z=2 for 2]. The crystal structure of 1 is related to a group of compounds formed by Cu²⁺-(XO₄)³⁻ layers (X=P⁵⁺, As⁵⁺) linked by M cations (M=alkali, alkaline earth, Pb²⁺, or Ag⁺) and partly by hydrogen bonds. In 1, worth mentioning is the very short hydrogen bond length, D···A=2.477(3) Å. It is one of the examples of extremely short hydrogen bonds, where the donor and acceptor are crystallographically different. Compound 2 represents a layered structure consisting of Cu₂O₈ centrosymmetric dimers crosslinked by As1φ₄ tetrahedra, where φ is O or OH, which are interconnected by Ba, As2 and hydrogen bonds to form a three-dimensional network. The layers are formed by Cu₂O₈ centrosymmetric dimers of CuO₅ edge-sharing polyhedra, crosslinked by As1O₄ tetrahedra. Vibrational spectra (FTIR and Raman) of both compounds are described. The spectroscopic manifestation of the very short hydrogen bond in 1, and ABC-like spectra in 2 were discussed.     

Synthesis and characterization of rare-earth doped SrBi2Nb2O9 phase in lithium borate based nanocrystallized glasses

Glass composites comprising of un-doped and samarium-doped SrBi₂Nb₂O₉ nanocrystallites are fabricated in the glass system 16.66SrO-16.66[(1−x)Bi₂O₃-xSm₂O₃]-16.66Nb₂O₅-50Li₂B₄O₇ (0?x?0.5, in mol%) via the melt quenching technique. The glassy nature of the as-quenched samples is established by differential thermal analyses. Transmission electron microscopic studies reveal the presence of about 15 nm sized spherical crystallites of the fluorite-like SrBi_1.9Sm_0.1Nb₂O₉ phase in the samples heat treated at 530 °C. The formation of layered perovskite-type un-doped and samarium-doped SrBi₂Nb₂O₉ nanocrystallites with an orthorhombic structure through the intermediate fluorite phase is confirmed by X-ray powder diffraction and micro-Raman spectroscopic studies. The influence of samarium doping on the lattice parameters, lattice distortions, and the Raman peak positions of SrBi₂Nb₂O₉ perovskite phase is clarified. The dielectric constants of the perovskite SrBi₂Nb₂O₉ and SrBi_1.9Sm_0.1Nb₂O₉ nanocrystals are relatively larger than those of the corresponding fluorite-like phase and the precursor glass.     

Oxygen/nitrogen ordering in lanthanum new phase (La3Si8N11O4)

High-resolution ¹⁷O NMR spectra have been collected for crystalline samples of lanthanum new phase, La₃Si₈N₁₁O₄. In conjunction with previously published ²⁹Si and ¹⁵N spectra obtained for this phase, and in the light of the high-quality crystal structure data reported recently, a more detailed interpretation of the NMR spectra is presented than was possible in previous studies. The non-bridging oxygens in the structure are responsible for the single sharp peak seen in the ¹⁷O spectrum at 188 ppm; the remaining oxygens, occupying bridging sites shared with nitrogen, show up only weakly on the ¹⁷O spectrum as a broad diffuse band centered around zero ppm. The peak at −57.3 ppm on the ²⁹Si spectrum is believed to correspond to an overlap of [SiN₄] and [SiON₃] environments, with the −68.2 ppm peak corresponding to an [SiO₂N₂] environment.     

Structural disorder in Ba0.6Sr0.4Al2O4

The structural disorder in Ba_0.6Sr_0.4Al₂O₄ (space group P6₃22) was investigated by X-ray powder diffraction and selected-area electron diffraction (SAED). The initial structural model was determined using direct methods, and it was further modified by the combined use of Rietveld method and maximum-entropy method (MEM). MEM-based pattern fitting method was subsequently applied, resulting in the final reliability indices of R_wp=9.61%, R_p=6.96%, R_B=1.40% and S=1.25. The electron density distribution was satisfactorily expressed by the split-atom model in which the strontium/barium and oxygen atoms were split to occupy the lower symmetry sites. The diffuse scattering in SAED was mainly attributable to the positional disorder of oxygen atoms.     

Eu3+在Ba2TiSi2O8中的发光

The barium titano-silicate phosphors doped with Eu³⁺ were synthesized by high temperature solid state reaction. The structures of as-synthesized samples were characterized by powder XRD. The maximum peaks of emission spectra of Ba₂TiSi₂O₈ and Ba₂TiSi₂O₈∶Eu³⁺ were respectively located at 450 and 618 nm, coming from the transitions of charge-transfer bands of Ti⁴⁺-O^2- and forced electric-dipole transition ⁵D₀-⁷F₂ of Eu³⁺. The luminous mechanisms of Ba₂TiSi₂O₈ and Ba₂TiSi₂O₈∶Eu³⁺ were suggested. The effects of concentration of Eu³⁺ on the luminous performance of Ba₂TiSi₂O₈∶Eu³⁺ were also studied and the results showed that the optimum concentration of Eu³⁺ was 0.12 mol per mole of matrix.     

Synthesis and Characterization of Organically Templated Copper Halides with Zero and One-dimensional Hybrid Structures: (nbq)4Cu4I8 and [(ipq)2(Cu5I7)] n

Two new organically templated copper halides, (nbq)₄Cu₄I₈ (1) and [(ipq)₂(Cu₅I₇)] _n (2) have been synthesized in the presence of nbq⁺ and ibq⁺ (nbq⁺ = N-(n-butyl)-quinolinium, ibq⁺ = N-(iso-pentyl)-quinolinium) acting as structure-directing agents(SDAs). Both of the compounds present hybrid structures with SDAs and inorganic moieties being incorporated. In 1, tetrameric Cu₄I₈ ⁴⁻ anion is composed by edge-sharing CuI₄ tetrahedrons and CuI₃ planar triangles. But the inorganic framework of 2 presents one-dimensional arrangement which results from the tetrahedron CuI₄ and pseudo trigonal pyramid CuI₃ through edge-sharing fashion. Electrostatic interactions between organic counter cations and inorganic moieties could be observed and contribute to the crystal packing. Both compounds are further characterized by IR, UV–Vis, elemental analysis, fluorescence and cyclic voltammetry.     

RBa2Cu4O8(R=Dy,Ho,Er,Tm,Yb)和Y2Ba4Cu7O14.3的化学键参数计算

使用复杂晶体上化学键理论计算了RBa