Curved ray tracing method for one-dimensional radiative transfer in the linear-anisotropic scattering medium with graded index

The curved ray tracing method (CRT) is extended to radiative transfer in the linear-anisotropic scattering medium with graded index from non-scattering medium. In this paper, the CRT is presented to solve one-dimensional radiative transfer in the linear-anisotropic scattering gray medium with a linear refractive index and two black boundaries. The predicted temperature distributions and radiative heat flux at radiative equilibrium are determined by the proposed method, and numerical results are compared with the data in references. The results show that the CRT has a good accuracy for radiative transfer in the linear-anisotropic scattering medium with graded index and the dimensionless emissive power and dimensionless radiative heat flux depend on the dimensionless refractive index gradient. It can also be seen that the dimensionless refractive index gradient has important effects on the temperature discontinuity at the boundaries.     

On the foundations of thermal radiation inside refractive media

In the effective geometry approach, the electromagnetic field experiences matter as a Gordon spacetime, which causes the appearing properties of light quanta to be modified. For problems involving time and space variations of the refractive index, we discuss and derive, in the geometrical optics limit, radiative transfer theory as a kinetic theory for photons in the Gordon spacetime.     

Refractive index imaging from radiative transfer equation-based reconstruction algorithm: Fundamentals

We present the first reconstruction algorithm for refractive index imaging, which is based on the radiative transfer equation (RTE). An objective function is iteratively minimized to find a solution to the problem of inversion of the refractive index field. The function describes the discrepancies of the emerging light measurements on the surface of the sample to be probed with predicted data from the corresponding numerical model. The unknown refractive index field is updated within each reconstruction iteration according to a search direction on the index distribution given by the adjoint model to the RTE. In this paper, emphasis is placed on the theoretical aspects. Preliminary tests are demonstrated on generic phantoms.     

On the derivation of vector radiative transfer equation for polarized radiative transport in graded index media

Light transport in graded index media follows a curved trajectory determined by Fermat's principle. Besides the effect of variation of the refractive index on the transport of radiative intensity, the curved ray trajectory will induce geometrical effects on the transport of polarization ellipse. This paper presents a complete derivation of vector radiative transfer equation for polarized radiation transport in absorption, emission and scattering graded index media. The derivation is based on the analysis of the conserved quantities for polarized light transport along curved trajectory and a novel approach. The obtained transfer equation can be considered as a generalization of the classic vector radiative transfer equation that is only valid for uniform refractive index media. Several variant forms of the transport equation are also presented, which include the form for Stokes parameters defined with a fixed reference and the Eulerian forms in the ray coordinate and in several common orthogonal coordinate systems.     

Temperature field of radiative equilibrium in a two-dimensional graded index medium with gray boundaries

In this paper, a numerical method is presented for the study of the radiative transfer in a two-dimensional graded index semitransparent medium with diffuse gray boundaries. The numerical method is a combination of the linear refractive index bar model, the discrete curved ray-tracing technique and the pseudo source adding method (LRIB-CRTP). In the traditional ray-tracing technique, it is difficult to deal with the diffuse gray boundary while solving the radiative transfer. Using the pseudo source adding method, the diffuse gray boundary of the medium can be treated as a black boundary. We have also studied the radiative equilibrium temperature field of the medium and analyzed the influence of some parameters involved. The results show that the directional discrete number is important for the medium having a large absorption coefficient. The results also show that the refractive index distribution greatly influences the temperature field, whereas the linear absorption coefficient distribution has little influence on the temperature field.     

Radiative intensity solution and thermal emission analysis of a semitransparent medium layer with a sinusoidal refractive index

The radiative intensity in a sinusoidal refractive index semitransparent medium layer is solved by the curved ray-tracing method in combination with the pseudo-source adding method. One boundary of the medium layer is an opaque diffuse substrate wall. The other boundary is a semitransparent specular or diffuse surface, from which the medium thermal emission emerges. With considering a linear temperature distribution, the radiative intensity formulae are, respectively, deduced under the two boundary conditions. On the basis of the radiative intensity solutions, the directional and hemispherical emission of the medium layer with a specular surface as well as the hemispherical emission of that with a diffuse surface are calculated. The influences of the optical thickness, sinusoidal refractive index distribution and linear temperature distribution on the thermal emission are investigated. The results show that the effects of refractive index and temperature distribution are significant and are different under the two reflecting modes of the surface.     

Monte Carlo discrete curved ray-tracing method for radiative transfer in an absorbing-emitting semitransparent slab with variable spatial refractive index

A Monte Carlo discrete curved ray-tracing method is developed to analyze the radiative transfer in one-dimensional absorbing-emitting semitransparent slab with variable spatial refractive index, in which the Monte Carlo method is combined with the discrete curved ray-tracing method. A problem of radiative equilibrium with linear variable spatial refractive index is taken as an example to examine the accuracy of the proposed method. The temperature distributions and the dimensionless radiative heat flux are determined by the proposed method and compared with the data in references, which are obtained by other different methods. The results show that the Monte Carlo discrete curved ray-tracing method has a good accuracy in solving the radiative transfer in one-dimensional semitransparent slab with variable spatial refractive index.     

Discrete curved ray-tracing method for radiative transfer in an absorbing-emitting semitransparent slab with variable spatial refractive index

A discrete curved ray-tracing method is developed to analyze the radiative transfer in one-dimensional absorbing-emitting semitransparent slab with variable spatial refractive index. The curved ray trajectory is locally treated as straight line and the complicated and time-consuming computation of ray trajectory is cut down. A problem of radiative equilibrium with linear variable spatial refractive index is taken as an example to examine the accuracy of the proposed method. The temperature distributions are determined by the proposed method and compared with the data in references, which are obtained by other different methods. The results show that the discrete curved ray-tracing method has a good accuracy in solving the radiative transfer in one-dimensional semitransparent slab with variable spatial refractive index.     

Discrete transfer method applied to radiative transfer in a variable refractive index semitransparent medium

Application of the discrete transfer method (DTM) has been extended to the analysis of radiative heat transfer in a variable refractive index participating medium. To validate the DTM formulation, radiative heat transfer in an absorbing, emitting and isotropically scattering planar medium was considered. The participating medium was assumed to be in radiative equilibrium. For both constant and variable refractive indices of the medium, the DTM results were compared with those available in the literature. The DTM was found to provide accurate results.     

气溶胶粒子散射和吸收特性对复折射率依赖性的数值研究

利用米散射理论数值计算分析了尺度参数为0.1~100时球形典型气溶胶粒子的散射和吸收特性对复折射率的依赖性关系。气溶胶粒子复折射率的实部和虚部是一个有机的整体,粒子复折射率的实部和虚部可以分别影响其散射和吸收特性。若实际大气气溶胶粒子大多是成核模态和积聚模态的小粒子,基于气溶胶的散射和吸收特性可以获得其复折射率的唯一解。但是,如果大气中存在大量的粗模态粒子时,气溶胶散射和吸收特性对其复折射率的依赖性较为复杂,只有选择有限的合适复折射率库区间,才有可能获得更合适的有效复折射率。     

半透明介质相变中的辐射变物性问题

半透明介质相变传热在许多工程领域引起关注,其实质是变物性条件下伴随相变的辐射-导热瞬态耦合传热问题,其难点在于相变过程中的辐射变物性问题,尤其是折射率的时空演变问题.本文首次研究相变过程中的变折射率问题.假设相变介质存在固相-糊状-液相区,固/糊界面、液/糊界面假定为半透明漫反射.采用多层辐射传递模型模拟相变介质内的辐...     

Benchmark numerical solutions for radiative heat transfer in two-dimensional medium with graded index distribution

In graded index media, the ray goes along a curved path determined by Fermat principle. Generally, the curved ray trajectory in graded index media is a complex implicit function, and the curved ray tracing is very difficult and complex. Only for some special refractive index distributions, the curved ray trajectory can be expressed as a simple explicit function. Two important examples are the layered and the radial graded index distributions. In this paper, the radiative heat transfer problems in two-dimensional square semitransparent with layered and radial graded index distributions are analyzed. After deduction of the ray trajectory, the radiative heat transfer problems are solved by using the Monte Carlo curved ray-tracing method. Some numerical solutions of dimensionless net radiative heat flux and medium temperature are tabulated as the benchmark solutions for the future development of approximation techniques for multi-dimensional radiative heat transfer in graded index media.     

Transient coupled radiative and conductive heat transfer in a semitransparent layer of ceramic

This work considers transient radiative and conductive heat transfer in a semitransparent layer of ceramic, submitted to several thermal and radiative boundary conditions. Each side of the layer is exposed to hot or cold radiative surroundings, while each boundary is heated or cooled by convection. The solution procedure must provide accurate temperature distribution in the layer, so a nodal analysis based on Hottel's zonal method extended by ray tracing method is carried out. A finite difference method with non-uniform space and time increments is used to solve the transient energy equation, including a radiative heat source, coupled to a equation of radiative transfer. Variable spacing was used to concentrate grid points in regions with large temperature gradients. The influence of refractive index, optical thicknesses and conduction-radiation parameters is investigated.     

Zygo interferometer for measuring refractive index of liquids and its application for heavy water analysis

The Zygo interferometer for measuring refractive index of liquids such as heavy water is presented. The accuracy of measurement in the refractive index of liquids is found to be ±0.0002 in the Zygo interferometer. An application of Zygo interferometer for heavy water analysis is also presented. The interferometer is found to be useful for determining the percentage purity of heavy water with an accuracy of ±5% in the purity range of 0–100%.     

Thermal emission characteristics of a graded index semitransparent medium

This paper develops a numerical model for thermal radiative transfer in a two-dimensional semitransparent graded index medium. A piecewise continuous refractive index model, the linear refractive index bar model, is presented. This model is established based on three hypotheses, and has a higher precision than the bar model used previously. This paper also studies the thermal emission from a two-dimensional graded index medium, which is scattering or non-scattering. We find that it can present an obvious pattern of directional distribution at times. The refractive index distribution and absorption coefficient are the two main influential factors. This finding differs from the common belief that thermal sources, such as the incandescent filament of a light bulb, emit a quasi-isotropic light. The finding also suggests that there maybe other important applications of artificial GRIN materials.     

Effect of reflecting modes on combined heat transfer within an anisotropic scattering slab

Under various interface reflecting modes, different transient thermal responses will occur in the media. Combined radiative-conductive heat transfer is investigated within a participating, anisotropic scattering gray planar slab. The two interfaces of the slab are considered to be diffuse and semitransparent. Using the ray tracing method, an anisotropic scattering radiative transfer model for diffuse reflection at boundaries is set up, and with the help of direct radiative transfer coefficients, corresponding radiative transfer coefficients (RTCs) are deduced. RTCs are used to calculate the radiative source term in energy equation. Transient energy equation is solved by the full implicit control-volume method under the external radiative-convective boundary conditions. The influences of two reflecting modes including both specular reflection and diffuse reflection on transient temperature fields and steady heat flux are examined. According to numerical results obtained in this paper, it is found that there exits great difference in thermal behavior between slabs with diffuse interfaces and that with specular interfaces for slabs with big refractive index.     

A note on the interface functions

The functions B₁(τ), D₂(τ), and D₃(τ), which arise in the study of radiative transfer through a planar medium with a relative refractive index different from unity, have been investigated. These functions reduce to exponential integrals when the refractive index of the medium is equal to that of the surroundings. Their behavior has been examined and is presented graphically and in tabular form for various ratios of the interface refractive index. When the interface refractive index ratio is larger than 1.2, these functions can be accurately approximated by an exponential of the form a e^?bτ.     

Influence of the refractive index on the radiative source function of an isotropically scattering medium

The influence of refractive index on the radiative source function is presented for the case of emission from an isothermal, isotropically scattering medium. A closed-form, approximate solution is obtained and results are presented for finite and semi-infinite nonconservative cases. An increase in refractive index causes the source function to increase and that effect is more pronounced at higher scattering albedo and smaller optical depths.