A new phase in the system lithium-aluminum: Characterization of orthorhombic Li2Al

Investigation of the Li rich part of the binary Li-Al system revealed the existence of a new phase, orthorhombic Li₂Al, which is isostructural to Li₂Ga and Li₂In. The crystal structure was determined from single crystal X-ray diffraction data (Cmcm, a=4.658(2) Å, b=9.767(4) Å, c=4.490(2) Å, Z=4). Refinement of atomic position site occupancies yielded a composition Li_1.92Al_1.08 (64 at% Li) indicating a small homogeneity range, Li_2−xAl_1+x. Li₂Al is the peritectic decomposition product of the stoichiometric compound Li₉Al₄, which is stable below 270±2 °C. Li₂Al itself decomposes peritectically to Li₃Al₂ and Li rich melt at 335±2 °C. The discovery of Li₂Al (Li_2−xAl_1+x) settles a long standing inconsistency in the Li-Al phase diagram which was based on the assumption that Li₉Al₄ possesses a high temperature modification.     

K2Mo4O13 phases prepared by hydrothermal synthesis

Hydrothermal synthesis in the K-Mo oxide system was investigated as a function of the pH of the reaction medium. Four compounds were formed, including two K₂Mo₄O₁₃ phases. One is a new low-temperature polymorph, which crystallizes in the orthorhombic, space group Pbca, with Z=8 and unit cell dimensions a=7.544(1) Å, b=15.394(2) Å, c=18.568(3) Å. The other is the known triclinic K₂Mo₄O₁₃, whose structure was re-determined from single crystal data; its cell parameters were determined as a=7.976(2) Å, b=8.345(2) Å, c=10.017(2) Å, α=107.104(3)°, β=102.885(3)°, γ=109.760(3)°, which are the standard settings of the crystal lattice. The orthorhombic phase converts endothermically into triclinic phase at ca. 730 K with a heat of transition of 8.31 kJ/mol.     

High-pressure transitions in MgAl2O4 and a new high-pressure phase of Mg2Al2O5

Phase transitions in MgAl₂O₄ were examined at 21-27 GPa and 1400-2500 °C using a multianvil apparatus. A mixture of MgO and Al₂O₃ corundum that are high-pressure dissociation products of MgAl₂O₄ spinel combines into calcium-ferrite type MgAl₂O₄ at 26-27 GPa and 1400-2000 °C. At temperature above 2000 °C at pressure below 25.5 GPa, a mixture of Al₂O₃ corundum and a new phase with Mg₂Al₂O₅ composition is stable. The transition boundary between the two fields has a strongly negative pressure-temperature slope. Structure analysis and Rietveld refinement on the basis of the powder X-ray diffraction profile of the Mg₂Al₂O₅ phase indicated that the phase represented a new structure type with orthorhombic symmetry (Pbam), and the lattice parameters were determined as a=9.3710(6) Å, b=12.1952(6) Å, c=2.7916(2) Å, V=319.03(3) Å³, Z=4. The structure consists of edge-sharing and corner-sharing (Mg, Al)O₆ octahedra, and contains chains of edge-sharing octahedra running along the c-axis. A part of Mg atoms are accommodated in six-coordinated trigonal prism sites in tunnels surrounded by the chains of edge-sharing (Mg, Al)O₆ octahedra. The structure is related with that of ludwigite (Mg, Fe²⁺)₂(Fe³⁺, Al)(BO₃)O₂. The molar volume of the Mg₂Al₂O₅ phase is smaller by 0.18% than sum of molar volumes of 2MgO and Al₂O₃ corundum. High-pressure dissociation to the mixture of corundum-type phase and the phase with ludwigite-related structure has been found only in MgAl₂O₄ among various A²⁺B³⁺₂O₄ compounds.     

Transition metal tetramolybdate dihydrates MMo4O13·2H2O (M=Co,Ni) having a novel pillared layer structure

Hydrothermal synthesis in the M/Mo/O (M=Co,Ni) system was investigated. Novel transition metal tetramolybdate dihydrates MMo₄O₁₃·2H₂O (M=Co,Ni), having an interesting pillared layer structure, were found. The molybdates crystallize in the triclinic system with space group P−1, Z=1 with unit cell parameters of a=5.525(3) Å, b=7.058(4) Å, c=7.551(5) Å, α=90.019(10)°, β=105.230(10)°, γ=90.286(10)° for CoMo₄O₁₃·2H₂O, and a=5.508(2) Å, b=7.017(3) Å, c=7.533(3) Å, α=90.152(6)°, β=105.216(6)°, γ=90.161(6)° for NiMo₄O₁₃·2H₂O The structure is composed of two-dimensional molybdenum-oxide (2D Mo-O) sheets pillared with CoO₆ octahedra. The 2D Mo-O sheet is made up of infinite straight ribbons built up by corner-sharing of four molybdenum octahedra (two MoO₆ and two MoO₅OH₂) sharing edges. These infinite ribbons are similar to the straight ones in triclinic-K₂Mo₄O₁₃ having 1D chain structure, but are linked one after another by corner-sharing to form a 2D sheet structure, like the twisted ribbons in BaMo₄O₁₃·2H₂O (or in orthorhombic-K₂Mo₄O₁₃) are.     

Synthesis, crystal structure and magnetic properties of U2Co6Al19

The new compound U₂Co₆Al₁₉ was prepared by reaction of the elemental components in an arc-melting furnace followed by a heat treatment at 1050°C for 500 h. Its chemical composition was checked by energy-dispersive X-ray analyses and its crystal structure was determined by single crystal X-ray diffraction experiments. It crystallizes with four formula units in the monoclinic space group C2/m in a unit cell of dimensions a=17.4617(3)Å, b=12.0474(2)Å, c=8.2003(1)Å, β=103.915(1)°. The crystal structure of U₂Co₆Al₁₉ can be regarded as a superstructure of NdCo_4−xGa₉ structure type. This complex structure consists of a three-dimensional Co-Al framework delimiting tunnels where the U atoms reside. The shortest U-U distances are found in the c direction with alternating values of 3.98(1) and 4.22(1) Å. Temperature-dependent magnetization shows a first peak at 12.5 K and a weak ferromagnetic character below the temperature T_C=8 K. Magnetization at 1.9 K reaches almost saturation in 5 T with the moment of 0.36 μ_B/U atom. The complex magnetic behavior of U₂Co₆Al₁₉ may be ascribed to a canted spin structure resulting from an antiparallel arrangement of the magnetic moments not fully compensated at low temperature. At higher temperature, the compound displays simple paramagnetic behavior.     

NaAlF4: Preparation, crystal structure and thermal stability

The compound NaAlF₄ has been obtained in the form of thin fibrous crystals or fine colorless powder by condensation at 18 °C of vapors arising over chiolite Na₅Al₃F₁₄ or NaCaAlF₆, heated up to 800 °C. Thermal stability has been investigated by the methods of thermal analysis and high temperature X-ray diffraction. When heated in air, NaAlF₄ is stable up to 390-400 °C, then there is an exothermal solid state decay into Na₅Al₃F₁₄(s) and AlF₃(s). At higher temperature Na₅Al₃F₁₄(s) decays into Na₃AlF₆(s) and NaAlF₄(g). The crystal structure (space group Cmcm, a=3.6124(1) Å, b=14.9469(7) Å, c=5.2617(3) Å, V=284.10 Å³) has been determined by X-ray powder diffraction method. In the crystal structure of NaAlF₄ the octahedrons [AlF₆] are joined through vertices and form corrugated layers, sodium ion layers being located between them. The distances between the atoms of Al-F are in the range 1.791-1.814 Å, and those for Na…F are in the range 2.297-2.439 Å. In spite of limited thermal stability of the crystal form, the compound NaAlF₄ is the main component of the gas mixture over solid and molten salts in the ternary system NaF-AlF₃-CaF₂ and participates in chemical transformations between the phases at high temperature.     

Synthesis and structural investigation of the compounds containing HF2 anions: Ca(HF2)2, Ba4F4(HF2)(PF6)3 and Pb2F2(HF2)(PF6)

Three new compounds Ca(HF₂)₂, Ba₄F₄(HF₂)(PF₆)₃ and Pb₂F₂(HF₂)(PF₆) were obtained in the system metal(II) fluoride and anhydrous HF (aHF) acidified with excessive PF₅. The obtained polymeric solids are slightly soluble in aHF and they crystallize out of their aHF solutions. Ca(HF₂)₂ was prepared by simply dissolving CaF₂ in a neutral aHF. It represents the second known compound with homoleptic HF environment of the central atom besides Ba(H₃F₄)₂. The compounds Ba₄F₄(HF₂)(PF₆)₃ and Pb₂F₂(HF₂)(PF₆) represent two additional examples of the formation of a polymeric zigzag ladder or ribbon composed of metal cation and fluoride anion (MF⁺)_n besides PbF(AsF₆), the first isolated compound with such zigzag ladder. The obtained new compounds were characterized by X-ray single crystal diffraction method and partly by Raman spectroscopy. Ba₄F₄(HF₂)(PF₆)₃ crystallizes in a triclinic space group P1¯ with a=4.5870(2) Å, b=8.8327(3) Å, c=11.2489(3) Å, α=67.758(9)°, β=84.722(12), γ=78.283(12)°, V=413.00(3) Å³ at 200 K, Z=1 and R=0.0588. Pb₂F₂(HF₂)(PF₆) at 200 K: space group P1¯, a=4.5722(19) Å, b=4.763(2) Å, c=8.818(4) Å, α=86.967(10)°, β=76.774(10)°, γ=83.230(12)°, V=185.55(14) ų, Z=1 and R=0.0937. Pb₂F₂(HF₂)(PF₆) at 293 K: space group P1¯, a=4.586(2) Å, b=4.781(3) Å, c=8.831(5) Å, α=87.106(13)°, β=76.830(13)°, γ=83.531(11)°, V=187.27(18) Å³, Z=1 and R=0.072. Ca(HF₂)₂ crystallizes in an orthorhombic Fddd space group with a=5.5709(6) Å, b=10.1111(9) Å, c=10.5945(10) Å, V=596.77(10) Å³ at 200 K, Z=8 and R=0.028.     

Ba14Zn5−xAl22+x: a new polar intermetallic compound with a novel 2D network

A new ternary, intermetallic compound, Ba₁₄Zn_5−xAl_22+x, was synthesized by heating the pure elements at 900°C. This compound crystallizes in the monoclinic space group I2/m, Z=2, with a=10.474(2) Å, b=6.0834(14) Å, c=34.697(8) Å and β=90.814(4)°. The crystal structure of Ba₁₄Zn_5−xAl_22+x consists of [Zn_5−xAl_22+x] slabs that are built with a novel, two-dimensional (2D) network of Zn and Al atoms involving eight-membered rings sandwiched between two layers of trigonal bipyramids interconnected by three-center bonding. Tight-binding, linear muffin-tin orbital (TB-LMTO-ASA) calculations have been performed to understand the relationship between composition and orbital interactions in the electronegative element framework. This new structure is closely related to the high-pressure, cubic Laves-type structure of BaAl₂ as well as the ambient pressure binary compound, Ba₇Al₁₃. The degree of valence electron charge transfer from the electropositive Ba atoms is related to the Al:Ba molar ratio in the Ba-Zn-Al system.     

Subsolidus phase relations and crystal structures of the mixed-oxide phases in the In2O3-WO3 system

Subsolidus phase relationships in the In₂O₃-WO₃ system at 800-1400°C were investigated using X-ray diffraction. Two binary-oxide phases—In₆WO₁₂ and In₂(WO₄)₃—were found to be stable over the range 800-1200°C. Heating the binary-oxide phases above 1200°C resulted in the preferential volatilization of WO₃. Rietveld refinement was performed on three structures using X-ray diffraction data from nominally phase-pure In₆WO₁₂ at room temperature and from nominally phase-pure In₂(WO₄)₃ at 225°C and 310°C. The indium-rich phase, In₆WO₁₂, is rhombohedral, space group (rhombohedral), with Z=1, a=6.22390(4) Å, α=99.0338(2)° [hexagonal axes: a_H=9.48298(6) Å, c=8.94276(6) Å, a_H/c=0.9430(9)]. In₆WO₁₂ can be viewed as an anion-deficient fluorite structure in which 1/7 of the fluorite anion sites are vacant. Indium tungstate, In₂(WO₄)₃, undergoes a monoclinic-orthorhombic transition around 250°C. The high-temperature polymorph is orthorhombic, space group Pnca, with a=9.7126(5) Å, b=13.3824(7) Å, c=9.6141(5) Å, and Z=4. The low-temperature polymorph is monoclinic, space group P2₁/a, with a=16.406(2) Å, b=9.9663(1) Å, c=19.099(2) Å, β=125.411(2)°, and Z=8. The structures of the two In₂(WO₄)₃ polymorphs are similar, consisting of a network of corner sharing InO₆ octahedra and WO₄ tetrahedra.     

Formation and structural refinements of tunneled intergrowth phases in the Ga2O3-In2O3-SnO2-TiO2 system

Over 100 samples were prepared as (Ga,In)₄(Sn,Ti)_n−4O_2n−2, n=6, 7, and 9 by solid-state reaction at 1400 °C and characterized by X-ray diffraction. Nominally phase-pure beta-gallia-rutile intergrowths were observed in samples prepared with n=9 (0.17?x?0.35 and 0?y?0.4) as well as in a few samples prepared with n=6 and 7. Rietveld analysis of neutron time-of-flight powder diffraction data were conducted for three phase-pure samples. The n=6 phase Ga_3.24In_0.76Sn_1.6Ti_0.4O₁₀ is monoclinic, P2/m, with Z=2 and a=11.5934(3) Å, b=3.12529(9) Å, c=10.6549(3) Å, β=99.146(1)°. The n=7 phase Ga_3.24In_0.76Sn_2.4Ti_0.6O₁₂ is monoclinic, C2/m, with Z=2 and a=14.2644(1) Å, b=3.12751(2) Å, c=10.6251(8) Å, β=108.405(1)°. The n=9 phase Ga_3.16In_0.84Sn₄TiO₁₆ is monoclinic, C2/m, with Z=2 a=18.1754(2) Å, b=3.13388(3) Å, c=10.60671(9) Å, β=102.657(1)°. All of the structures are similar in that they possess distorted hexagonal tunnels parallel to the [010] vector.     

Hexatungstate subunit as building block in the hydrothermal synthesis of organic-inorganic hybrid materials: synthesis, structure and optical properties of Co2(bpy)6 (W6O19)2 (bpy=4,4′-bipyridine)

A hydrothermal reaction of WO₃, CoCl₂ and 4,4′-bipyridine, yields a novel organic-inorganic hybrid compound, Co₂(bpy)₆(W₆O₁₉)₂, at 170°C. X-ray single crystal structure determination reveals a two-dimensional covalent structure belonging to monoclinic crystal system, space group C2/c, with cell parameters a=19.971(4) Å, b=11.523(2) Å, c=16.138(3) Å, β=96.49(3)°, V=3690.0 Å³ and Z=2. The hexatungstate, [W₆O₁₉]²⁻, acts as a building block in bidentate fashion to bridge the Co(II) centers in the crystal structure. The title compound is found to have an optical energy gap of 2.2 eV from UV-Vis-NIR reflectance spectra.     

Phase equilibria in the CdI2-Ag2Se system

The phase diagram of the system CdI₂-Ag₂Se is studied by means of X-ray diffraction, differential thermal analysis and measurements of the density of the material. The unit cell parameters of the intermediate phase 2CdI₂·3Ag₂Se were determined a = 0.6387 Å, b = 4.311 Å, c = 4.044 Å; α = 113.72°, β = 90.27° and γ = 94.85°. The intermediate phase 2CdI₂·3Ag₂Se has a polymorphic transition at 125 °C. It melts incongruently at 660 °C.     

Synthesis crystal structure and ionic conductivity of Ca0.5Bi3V2O10 and Sr0.5Bi3V2O10

Two new compounds Ca_0.5Bi₃V₂O₁₀ and Sr_0.5Bi₃V₂O₁₀ have been synthesized in the ternary system: MO-Bi₂O₃-V₂O₅ system (M=M²⁺). The crystal structure of Sr_0.5Bi₃V₂O₁₀ has been determined from single crystal X-ray diffraction data, space group and Z=2, with cell parameters a=7.1453(3) Å, b=7.8921(3) Å, c=9.3297(3) Å, α=106.444(2)°, β=94.088(2)°, γ=112.445(2)°, V=456.72(4) Å³. Ca_0.5Bi₃V₂O₁₀ is isostructural with Sr_0.5Bi₃V₂O₁₀, with, a=7.0810(2) Å, b=7.8447(2) Å, c=9.3607(2) Å, α=106.202(1)°, β=94.572(1)°, γ=112.659(1)°, V=450.38(2) Å³ and its structure has been refined by Rietveld method using powder X-ray data. The crystal structure consists of infinite chains of (Bi₂O₂) along c-axis formed by linkage of BiO₈ and BiO₆ polyhedra interconnected by MO₈ polyhedra forming 2D layers in ac plane. The vanadate tetrahedra are sandwiched between these layers. Conductivity measurements give a maximum conductivity value of 4.54×10⁻⁵ and 3.63×10⁻⁵ S cm⁻¹ for Ca_0.5Bi₃V₂O₁₀ and Sr_0.5Bi₃V₂O₁₀, respectively at 725 °C.     

Synthesis and structure of organically templated lanthanum sulfate [C4N3H16][La(SO4)3]·H2O

The first organically templated one-dimensional lanthanum sulfate [C₄N₃H₁₆][La(SO₄)₃]·H₂O has been prepared employing hydrothermal methods in the presence of diethylenetriamine (DETA). The structure was determined by single-crystal X-ray diffraction (XRD). The title compound crystallizes in the triclinic system, space group P-1 (No.2) with cell parameters M=551.30, a=8.2773(7) Å, b=9.5660(6) Å, c=10.4363(6) Å, α=105.661(2)°, β=102.849(3)°, γ=104.376(3)°, V=732.72(9) Å³, Z=2, R=0.0285, wR=0.0778. The structure consists of infinite linear chains. The chains are held together by hydrogen bond interactions involving the hydrogens of the amine and the framework oxygens. The as-synthesized product is characterized by powder XRD, inductive couple plasma analysis and thermogravimetric analysis.     

Synthesis, crystal structure and mono-dimensional thallium ion conduction of TlFe0.22Al0.78As2O7

A new solid solution TlFe_0.22Al_0.78As₂O₇ has been synthesized by a solid-state reaction. The structure of the title compound has been determined from a single-crystal X-ray diffraction and refined to final values of the reliability factors: R(F²)=0.030 and wR(F²)=0.081 for 1343 independent reflections with I>2σ(I). It crystallizes in the triclinic space group P-1, with a=6.296(2) Å, b=6.397(2) Å, c=8.242(2) Å, α=96.74(2)°, β=103.78(2)°, γ=102.99(3)°, V=309.0(2) Å³ and Z=2. The structure can be described as a three-dimensional framework containing (Fe/Al)O₆ octahedra connected through As₂O₇ groups. The metallic units and diarsenate groups share oxygen corners to form a three-dimensional framework with interconnected tunnels parallel to the a, b and c directions, where Tl⁺ cations are located. The ionic conductivity measurements are performed on pellets of the polycrystalline powder. At 683 K, The conductivity value is 5.23×10⁻⁶ S cm⁻¹ and the ionic jump activation energy is 0.656 eV. The bond valence analysis reveals that the ionic conductivity is ensured by Tl⁺ along the [001] direction.     

Synthesis, structural characterization and optical properties of a new cesium aluminum borate, Cs2Al2B2O7

A new borate, Cs₂Al₂B₂O₇, was synthesized by solid-state reaction. It crystallizes in the monoclinic space group P2₁/c with a=6.719(1) Å, b=7.121(1) Å, c=9.626(3) Å, β=115.3(1)°, and Z=2. In the structure, two AlO₄ tetrahedra and two BO₃ planar triangles are connected alternately by corner-sharing to from nearly planar [Al₂B₂O₁₀] rings, which are further linked via common O1 atom to generate layers in the bc plane. These layers then share the O3 atoms lying on a center of inversion to form a three-dimensional framework with Cs atoms residing in the channels. The IR spectrum confirms the presence of both BO₃ and AlO₄ groups and the UV-vis-IR diffuse reflectance spectrum indicates a band gap of about 4.13(2) eV.     

High-pressure high-temperature synthesis and crystal structure of the isotypic rare earth (RE)-thioborate-sulfides RE9[BS3]2[BS4]3S3, (RE=Dy-Lu)

Application of high-pressure high-temperature conditions (3.5 GPa at 1673 K for 5 h) to mixtures of the elements (RE:B:S=1:3:6) yielded crystalline samples of the isotypic rare earth-thioborate-sulfides RE₉[BS₃]₂[BS₄]₃S₃, (RE=Dy-Lu), which crystallize in space group P6₃ (Z=2/3) and adopt the Ce₆Al_3.33S₁₄ structure type. The crystal structures were refined from X-ray powder diffraction data by applying the Rietveld method. Dy: a=9.4044(2) Å, c=5.8855(3) Å; Ho: a=9.3703(1) Å, c=5.8826(1) Å; Er: a=9.3279(12) Å, c=5.8793(8) Å; Tm: a=9.2869(3) Å, c=5.8781(3) Å; Yb: a=9.2514(5) Å, c=5.8805(6) Å; Lu: a=9.2162(3) Å, c=5.8911(3) Å. The crystal structure is characterized by the presence of two isolated complex ions [BS₃]^3- and [BS₄]^5- as well as [□(S^2-)₃] units.     

Synthesis, crystal structure, phase transition and thermal behaviour of a new dabcodiium hexaaquanickel(II) bis(sulphate), (C6H14N2)[Ni(H2O)6](SO4)2

A new dabcodiium-templated nickel sulphate, (C₆H₁₄N₂)[Ni(H₂O)₆](SO₄)₂, has been synthesised and characterised by single-crystal X-ray diffraction at 20 and −173 °C, differential scanning calorimetry (DSC), thermogravimetry (TG) and temperature-dependent X-ray powder diffraction (TDXD). The high temperature phase crystallises in the monoclinic space group P2₁/n with the unit-cell parameters: a = 7.0000(1), b = 12.3342(2), c = 9.9940(2) Å; β = 90.661(1)°, V = 862.82(3) Å³ and Z = 2. The low temperature phase crystallises in the monoclinic space group P2₁/a with the unit-cell parameters: a = 12.0216(1), b = 12.3559(1), c = 12.2193(1) Å; β = 109.989(1)°, V = 1705.69(2) Å³ and Z = 4. The crystal structure of the HT-phase consists of Ni²⁺ cations octahedrally coordinated by six water molecules, sulphate tetrahedra and disordered dabcodiium cations linked together by hydrogen bonds. It undergoes a reversible phase transition (PT) of the second order at −53.7/−54.6 °C on heating-cooling runs. Below the PT temperature, the structure is fully ordered. The thermal decomposition of the precursor proceeds through three stages giving rise to the nickel oxide.     

Structure of β-AgAlO2 and structural systematics of tetrahedral MM′X2 compounds

The structure of β-AgAlO₂ has been refined from neutron diffraction data by the Rietveld method. The space group is Pna2₁ with a=5.4306(1) Å, b=6.9802(1) Å, c=5.3751(1) Å, and Z=4. Both cations are tetrahedrally coordinated to oxygen. The tetrahedron around Al is quite regular with distances ranging from 1.75 to 1.77 Å and angles ranging from 107.8 to 111.0°. The tetrahedron around Ag is, however, highly distorted with distances ranging from 2.35 to 2.48 Å and angles ranging from 99.3 to 131.6°. The low bond valence calculated for Ag(I) of 0.895 is attributed to the strong deviation of the O−Ag−O angles from 109.5°. This structure is based on the hexagonal ZnO structure, and we show that the ordered arrangement of M(I) and M(III) cations in this structure directly causes the tetrahedra to distort and tilt.     

Crystal structures and photocatalysis of the triclinic polymorphs of BiNbO4 and BiTaO4

The high-temperature polymorphs of two photocatalytic materials, BiNbO₄ and BiTaO₄ were synthesized by the ceramic method. The crystal structures of these materials were determined by single-crystal X-ray diffraction. BiNbO₄ and BiTaO₄ crystallize into the triclinic system P1¯ (No. 2), with a=5.5376(4) Å, b=7.6184(3) Å, c=7.9324(36) Å, α=102.565(3)°, β=90.143(2)°, γ=92.788 (4)°, V=326.21 (5) Å³, Z=4 and a=5.931 (1) Å, b=7.672 (2) Å, c=7.786 (2) Å, α=102.94 (3)°, β=90.04 (3)° γ=93.53 (3)°, V=344.59 (1) Å³ and Z=4, respectively. The structures along the c-axis, consist of layers of [Bi₂O₂] units separated by puckered sheets of (Nb/Ta)O₆ octahedra. Photocatalytic studies on the degradation of dyes indicate selectivity of BiNbO₄ towards aromatics containing quinonic and azo functional groups.