Synthesis and characterization of sodium titanates Na2Ti3O7 and Na2Ti6O13

Na₂Ti₃O₇ and Na₂Ti₆O₁₃ were synthesized by sol-gel method in order to obtain pure phases. Different heat-treatments were applied on powders and pellets of these materials. The effects were studied by XRD, dilatometry, TGA-DTA, SEM and electrochemical impedance spectroscopy. Pure Na₂Ti₃O₇ was obtained at 973 K. Sintering at 1373 K caused a partial decomposition into Na₂Ti₆O₁₃. The Na₂Ti₃O₇ powder sintered at 1273 K showed polygonal microstructure. Na₂Ti₃O₇ pellets sintered at 1323 K for 10 h exhibited large structures. This latter microstructure decreased the electrical conductivity of Na₂Ti₃O₇. Pure Na₂Ti₆O₁₃ was obtained at 873 K. Sintering at 1073 K caused a partial decomposition into TiO₂ (rutile). Na₂Ti₆O₁₃ pellets sintered at 1323 K for 10 h exhibited common shrinkage behavior. This shrinkage process increased the electrical conductivity of this material. The presence of TiO₂ resulted in a oxygen partial pressure dependence of the electrical conductivity.     

Preparation, crystal structure and thermal expansion of a new bismuth barium borate, BaBi2B4O10

Single crystals of a new compound, BaBi₂B₄O₁₀ were grown by cooling a melt with the stoichiometric composition. The crystal structure of the compound has been solved by direct methods and refined to R₁=0.049 (wR=0.113) on the basis of 1813 unique observed reflections (|F_o|>4σ|F_o|). It is monoclinic, space group P2₁/c, a=10.150(2), b=6. 362(1), c=12.485(2) Å, β=102.87(1)^o, V=786.0(2) Å³, Z=4. The structure is based upon anionic thick layers that are parallel to (001). The layers can be described as built from alternating novel borate [B₄O₁₀]⁸⁻_∞ chains and bismuthate [Bi₂O₅]⁴⁻_∞ chains extended along b-axis. The borate chains are composed of [B₃O₈]⁷⁻ triborate groups of three tetrahedra and single triangles with a [BO₂]⁻ radical. The borate chains are interleaved along the c-axis with rows of the Ba²⁺ cations so that the Ba atoms are located within the layers. The layers are connected by two nonequivalent Ba-O bonds as well as by two equivalent Bi-O bonds with bond valences in the range of 0.2-0.3 v.u.Thermal expansion of BaBi₂B₄O₁₀ studied by high-temperature X-ray powder diffraction in the temperature range of 20-700 °C (temperature step 30-35 °C) is highly anisotropic. While the b and c unit-cell parameters increase almost linearly on heating, temperature dependencies of a parameter and β monoclinic angle show nonlinear behavior. As a result, on heating orientation of thermal expansion tensor changes, and bulk thermal expansion increases from 20×10⁻⁶ °C⁻¹ at the first heating stage up to 57×10⁻⁶ °C⁻¹ at 700 °C that can be attributed to the increase of thermal mobility of heavy Bi³⁺ and Ba²⁺ cations.     

High-pressure synthesis and crystal structure of the lithium borate HP-LiB3O5

The new lithium borate HP-LiB₃O₅ was synthesized under high-pressure/high-temperature conditions of 6 GPa and 1050 °C in a multianvil press with a Walker-type module. The compound crystallizes in the space group Pnma (no. 62) with the lattice parameters a=829.7(2), b=759.6(2), and c=1726.8(4) pm (Z=16). The high-pressure compound HP-LiB₃O₅ is built up from a three-dimensional network of BO₄ tetrahedra and BO₃ groups, which incorporates Li⁺ ions in channels along the b-axis. Band assignments of measured IR- and Raman spectra were done via quantum-mechanical calculations. Additionally, the thermal behavior of HP-LiB₃O₅ was investigated.     

X-ray powder diffraction studies and thermal behaviour of NaK2B9O15, Na(Na.17K.83)2B9O15, and (Na.80K.20)K2B9O15

The crystal structures of NaK₂B₉O₁₅ (, , , β=94.080(1)°, R_p=0.047, R_wp=0.059, R_B=0.026), Na(Na_.17K_.83)₂B₉O₁₅ (, , , β=94.228(2)°, R_p=0.053, R_wp=0.068, R_B=0.026), and (Na_.80K_.20)K₂B₉O₁₅ (, , , β=94.071(1)°, Z=4, R_p=0.041, R_wp=0.052, R_B=0.023) were refined in the monoclinic space groups P2₁/c(Z=4) using X-ray powder diffraction data and the Rietveld method. These nonaborates are isostructural to K₃B₉O₁₅. Their crystal structure consists of a three-dimensional open framework built up from three crystallographically independent triborate groups. The alkali metal cations are located on three different sites in the voids of the framework. High-temperature X-ray diffraction studies show that NaK₂B₉O₁₅ decomposes at about 700 °C in accordance with the peritectic reaction NaK₂B₉O₁₅↔K₅B₁₉O₃₁+liquid. The thermal expansion of NaK₂B₉O₁₅ and Na(Na_.17K_.83)₂B₉O₁₅ is highly anisotropic. A similarity of the thermal and compositional (Na-K substitution) deformations of NaK₂B₉O₁₅ is revealed: heating of NaK₂B₉O₁₅ by 1 °C leads to the same deformations of the crystal structure as increasing the amount of K atoms in (Na_1−xK_x)₃B₉O₁₅ by 0.04 at% K.     

Gd4B4O11F2: Synthesis and crystal structure of a rare-earth fluoride borate exhibiting a new “fundamental building block” in borate chemistry

A new gadolinium fluoride borate Gd₄B₄O₁₁F₂ was yielded in a Walker-type multianvil apparatus at 7.5 GPa and 1100 °C. Gd₄B₄O₁₁F₂ crystallizes monoclinically in the space group C2/c with the lattice parameters a=1361.3(3) pm, b=464.2(2) pm, c=1374.1(3) pm, and β=91.32(3)° (Z=4). The crystal structure exhibits a structural motif not yet reported from borate chemistry: two BO₄-tetrahedra (□) and two BO₃-groups (?) are connected via common corners, leading to the fundamental building block 2?2□:?□□?. In the two crystallographically identical BO₄-tetrahedra, a distortion resulting in a very long B-O-bond is found.     

Crystal structures of the novel hydrated borates Ba2B5O9(OH), Sr2B5O9(OH) and Li2Sr8B22O41(OH)2

Three novel hydrated borates Ba₂B₅O₉(OH) (1), Sr₂B₅O₉(OH) (2) and Li₂Sr₈B₂₂O₄₁(OH)₂ (3) have been synthesized hydrothermally and their structures determined. Compounds (1) and (2) are isostructural, crystallizing in space group P2₁/c and having lattice parameters of a=6.6330(13) Å, b=8.6250(17) Å, c=14.680(3) Å, β=93.46(3)° and a=6.4970(13) Å, b=8.4180(17) Å, c=14.177(3) Å, β=94.35(3)°, respectively. Compound (3) crystallizes in P-1 with lattice parameters of a=6.4684(13) Å, b=8.4513(17) Å, c=14.881(3) Å, α=101.21(3)°, β=93.96(3)°, γ=90.67(3)°. While similar in their axis lengths, (3) differs greatly in structure and formulation from (1) and (2). The structure of (1) and (2) is contrasted to that of the well-known mineral hilgardite (Ca₂B₅O₉Cl·H₂O).     

High-pressure synthesis and crystal structure of the mixed-valent titanium borate Ti5B12O26

The new titanium borate was synthesized under high-pressure/high-temperature conditions in a Walker-type multianvil apparatus at 7.5 GPa and 1350 °C. Ti₅B₁₂O₂₆ is built up exclusively from corner-sharing BO₄-tetrahedra and shows a structural relation to the Zintl phase NaTl. Consisting of B₁₂O₂₆-clusters as fundamental building blocks, the structure of Ti₅B₁₂O₂₆ can be described via two interpenetrating diamond structures as in NaTl, where each atom corresponds to one B₁₂O₂₆-cluster. The tetragonal titanium borate crystallizes with eight formula units in the space group I4₁/acd and exhibits lattice parameters of a=1121.1(2) pm and c=2211.5(4) pm. Ti₅B₁₂O₂₆ is a mixed-valent compound with Ti^III and Ti^IV cations. The environment of the titanium cations, as well as charge distribution calculations, leads us to the assumption that Ti^III and Ti^IV are located on different crystallographic sites.     

超声辅助制备表面修饰纳米Ca2B6O11及表征

纳米材料的制备及其应用于润滑油摩擦性能研究,对于改善油品的性能和延长设备的使用寿命具有重要的意义。首次采用超声辅助法合成了球型、粒径分布均匀的纳米硼酸钙润滑油添加剂并对其进行了表征。XRD结合热分析发现样品在室温下为非晶态,750℃结晶,且原料配比对晶态没有影响。SEM和TEM分析证明在超声波辅助下可以得到50 nm的超微粒子,而不用超声波的样品粒径为200~300 nm。在超声和搅拌下将2%的添加剂均匀分散在润滑油中,得到成品油。静置观察评价了润滑油的分散性和稳定性。在重负荷车辆与工业齿轮油中试验检验了润滑油的的润滑性能。结果表明,纳米硼酸钙添加剂具有良好的分散性、稳定性和抗磨减摩性能。     

Synthesis, structure and properties of new chain cuprates, Na3Cu2O4 and Na8Cu5O10

Na₃Cu₂O₄ and Na₈Cu₅O₁₀ were prepared via the azide/nitrate route from stoichiometric mixtures of the precursors CuO, NaN₃ and NaNO₃. Single crystals have been grown by subsequent annealing of the as prepared powders at 500 °C for 2000 h in silver crucibles, which were sealed in glass ampoules under dried Ar. According to the X-ray analysis of the crystal structures (Na₃Cu₂O₄: P2₁/n, Z=4, a=5.7046(2), b=11.0591(4), c=8.0261(3) Å, β=108.389(1)°, 2516 independent reflections, R₁(all)=0.0813, wR₂ (all)=0.1223; Na₈Cu₅O₁₀: Cm, Z=2, a=8.228(1), b=13.929(2), , β=111.718(2)°, 2949 independent reflections, R₁(all)=0.0349, wR₂ (all)=0.0850), the main feature of both crystal structures are CuO₂ chains built up from planar, edge-sharing CuO₄ squares. From the analysis of the Cu-O bond lengths, the valence states of either +2 or +3 can be unambiguously assigned to each copper atom. In Na₃Cu₂O₄ these ions alternate in the chains, in Na₈Cu₅O₁₀ the periodically repeated part consists of five atoms according to Cu^II-Cu^II-Cu^III-Cu^II-Cu^III. The magnetic susceptibilities show the dominance of antiferromagnetic interactions. At high temperatures the compounds exhibit Curie-Weiss behaviour (Na₃Cu₂O₄: , , Na₈Cu₅O₁₀: , , magnetic moments per divalent copper ion). Antiferromagmetic ordering is observed to occur in these compounds below 13 K (Na₃Cu₂O₄) and 24 K (Na₈Cu₅O₁₀).     

Synthesis, structure and magnetic properties of Na6Co2O6

Na₆Co₂O₆ was synthesized via the azide/nitrate route by reaction between NaN₃, NaNO₃ and Co₃O₄. Stoichiometric mixtures of the starting materials were heated in a special regime up to 500°C and annealed at this temperature for 50 h in silver crucibles. Single crystals have been grown by subsequent annealing of the reaction product at 500°C for 500 h in silver crucibles, which were sealed in glass ampoules under dried Ar. According to the X-ray analysis of the crystal structure (, Z=1, a=5.7345(3), b=5.8903(3), c=6.3503(3) Å, α=64.538(2), β=89.279(2), γ=85.233(2)°, 1006 independent reflections, R₁=8.34% (all data)), cobalt is tetrahedrally coordinated by oxygen. Each two CoO₄ tetrahedra are linked through a common edge forming Co₂O₆^6- anions. Cobalt ions within the dimers, being in a high spin state (S=2), are ferromagnetically coupled (J=17 cm^-1). An intercluster spin exchange (zJ′=−4.8 cm^-1) plays a significant role below 150 K and leads to an antiferromagnetically ordered state below 30 K. Heat capacity exhibits a λ-type anomaly at this temperature and yields a value of 19.5 J/mol K for the transition entropy, which is in good agreement with the theoretical value calculated for the ordering of the ferromagnetic-coupled dimers. In order to construct a model for the spin interactions in Na₆Co₂O₆, the magnetic properties of Na₅CoO₄ have been measured. This compound features isolated CoO₄ tetrahedra and shows a Curie-Weiss behavior (μ=5.14 μ_B, Θ=−20 K) down to 15 K. An antiferromagmetic ordering is observed in this compound below 10 K.     

Synthesis, structure characterization and fluorescence property of a new fluoride borate crystal, CdZn2KB2O6F

A new fluoride borate crystal, CdZn₂KB₂O₆F, has been synthesized by flux-supported solid-state reaction. The crystal structure has been determined by single-crystal X-ray diffraction. It crystallizes in the trigonal space group with a=5.0381(6) Å, b=5.0381(6) Å, c=15.1550(19) Å, α=90.00°, β=90.00°, γ=120.00°, Z=2. The crystal represents a new structure type in which ZnBO₃ layers are connected through bridging fluorine and cadmium atoms alternately along the c-axis. K⁺ cations are filled in the intralayer open channels to balance charge. IR and Raman spectra further confirm the crystal structure. Photoluminescent measurement reveals that CdZn₂KB₂O₆F exhibits blue fluorescence at room temperature in the solid-state.     

Synthesis, crystal structure and NLO property of a nonmetal pentaborate [C6H13N2][B5O6(OH)4]

A nonmetal pentaborate [C₆H₁₃N₂][B₅O₆(OH)₄] (1) has been synthesized by 1,4-diazabicyclo[2.2.2] octane (DABCO) and boric acid, and characterized by single-crystal X-ray diffraction, FTIR, elemental analysis, and thermogravimetric analysis. Compound 1 crystallizes in the monoclinic system with space group Cc (no. 9), a=10.205(2) Å, b=14.143(3) Å, c=11.003(2) Å, β=113.97(3)°, V=1451.1(5) Å³, Z=4. The anionic units, [B₅O₆(OH)₄]⁻, are interlinked via hydrogen bonding to form a three-dimensional (3D) supramolecular network containing large channels, in which the protonated [C₆H₁₃N₂]⁺ cations are located. Second-harmonic generation (SHG) measurements on the powder samples reveal that 1 exhibits SHG efficiency approximately 0.9 times that of potassium dihydrogen phosphate (KDP).     

A new structure type of RE4B4O11F2: High-pressure synthesis and crystal structure of La4B4O11F2

The first lanthanum fluoride borate La₄B₄O₁₁F₂ was obtained in a Walker-type multianvil apparatus at 6 GPa and 1300 °C. La₄B₄O₁₁F₂ crystallizes in the monoclinic space group P2₁/c with the lattice parameters a=778.1(2) pm, b=3573.3(7) pm, c=765.7(2) pm, β=113.92(3)° (Z=8), and represents a new structure type in the class of compounds with the composition RE₄B₄O₁₁F₂. The crystal structure contains BO₄-tetrahedra interconnected with two BO₃-groups via common vertices, B₂O₅-pyroborate units, and isolated BO₃-groups. The structure shows a wave-like modulation along the b-axis. The crystal structure and properties of La₄B₄O₁₁F₂ are discussed and compared to Gd₄B₄O₁₁F₂.     

Cu3B2O6/CuB2O4单晶的制备及其可见光催化降解亚甲基蓝

以醋酸铜/硝酸铜和硼酸为原料,柠檬酸作发泡剂,采用溶胶-凝胶法制得了高纯度的单晶结构硼酸铜（Cu₃B₂O₆/CuB₂O₄）. 利用X射线衍射（XRD）、扫描电镜（SEM）、高分辨率透射电镜（HRTEM）、热重-差热分析（TGDTA）等对样品进行了表征,并考察了Cu₃B₂O₆/CuB₂O₄在可见光（400 nm<λ<1100 nm）下对亚甲基蓝（MB）溶液的催化降解性能. 结果表明,两种结构的硼酸铜都具有良好的光催化性能. 当亚甲基蓝的初始浓度为50 mg·L^-1,催化剂用量为1 g·L^-1,光照6 h后,CuB₂O₄对亚甲基蓝的光催化降解率为63.36%,Cu₃B₂O₆对亚甲基蓝的光催化降解率为99.52%. 紫外-可见漫反射光谱（UV-Vis DRS）结果表明,Cu₃B₂O₆的中间能态宽度为1.78 eV,小于CuB₂O₄的中间能态宽度（1.95 eV）,且Cu₃B₂O₆的禁带宽度较窄（E_g=2.34 eV）,不仅可以发生价带顶与中间能态的电子跃迁,同时可以发生禁带间的电子跃迁,所以Cu₃B₂O₆比CuB₂O₄具有更高的可见光催化性能.     

Low-temperature flux syntheses and characterizations of two 1-D anhydrous borophosphates: Na3B6PO13 and Na3BP2O8

Two new anhydrous sodium borophosphates with one-dimensional structure, Na₃B₆PO₁₃(1) and Na₃BP₂O₈(2), were synthesized by low-temperature molten salts techniques using boric acid and sodium dihydrogen phosphate as flux, respectively. The crystal structures were solved by means of single-crystal X-ray diffraction (1, orthorhombic, Pnma (no. 62), , , , Z=4; 2 , monoclinic, C2/c (no. 15), , , , β=92.492(5)°, Z=8). Compound 1 is characterized by an infinite chain of containing eight-membered rings in which all vertexes of borate groups contribute to interconnection. Compound 2 reveals an infinite straight chain built of vertex-sharing four-membered rings, and chains in neighboring layers arranged along different orientations. The relations between structures and the synthetic conditions with only traced water are discussed.     

碳包覆Na2Ti6O13纳米管的电化学性能研究

以金红石型TiO2和NaOH为原料,由水热反应制备Na2Ti6O13纳米管.然后,在含有0.1 mol.L-1NaOH的葡萄糖水溶液中反应4 h制得碳包覆的Na2Ti6O13纳米管.X射线衍射(XRD)、扫描电子显微镜(SEM)和透射电子显微镜(TEM)等分析表明,该碳包覆Na2Ti6O13纳米管外径约14～19 nm,内径约2～5 nm,长度为数百纳米,有一层厚度约为2 nm的碳层包覆在纳米管外壁.以其作为锂离子电池负极材料,恒电流充放电测试表明,在50 mA.g-1电流密度下首周可逆容量达到161 mAh.g-1,循环100周后容量保持在147 mAh.g-1.相比于Na2Ti6O13纳米管,提高了20%以上.电流密度升至1600 mA.g-1充放电,碳包覆Na2Ti6O13纳米管可逆容量仍有70 mAh.g-1左右,远高于Na2Ti6O13纳米管,表现出良好的倍率性能.     

Synthesis, structure and magnetic properties of the new mixed-valence vanadate Na2SrV3O9

The new complex oxide Na₂SrV₃O₉ was synthesized and investigated by means of X-ray diffraction, electron microscopy and magnetic susceptibility measurements. This oxide has a monoclinic unit cell with parameters a=5.416(1) Å, b=15.040(3) Å, c=10.051(2) Å, β=97.03(3)°, space group P2₁/c and Z=4. The crystal structure of Na₂SrV₃O₉, as determined from X-ray single-crystal data, is built up from isolated chains formed by square V⁴⁺O₅ pyramids. Neighboring pyramids are linked by two bridging V⁵⁺O₄ tetrahedra sharing a corner with each pyramid. The Na and Sr atoms are situated between the chains. Electron diffraction and HREM investigations confirmed the crystal structure. The temperature dependence of the susceptibility indicates low-dimensional magnetic behavior with a sizeable strength of the magnetic intra-chain exchange J of the order of 80 K, which is very likely due to superexchange through the two VO₄ tetrahedra linking the magnetic V⁴⁺ cations.     

Synthesis and structure of [C6N4H20]0.5[B5O6(OH)4]: A new organically templated pentaborate with white-light-emission

A new organically templated pentaborate [C₆N₄H₂₀]_0.5[B₅O₆(OH)₄] (1a) was prepared by reactions of triethylenetetramine (TETA) with excess boric acid in aqueous solution and characterized by elemental analysis, FTIR, TG-DTA, powder X-ray diffraction and photoluminescence spectroscopy. The structure of 1a was determined by a single-crystal X-ray diffraction. It crystallizes in the monoclinic system with space group P2(1)/c, a=9200(3) Å, b=14.121(5) Å, c=10.330(4) Å, β=91.512(4)°, V=1341.4(9) Å³, and Z=4. The luminescent properties of the compound were studied, and a green-blue luminescence occurs with an emission maximum at 507 nm upon excitation at 430 nm. The photoluminescence of 1a can be modified from green-blue to white by means of a simple heat-treatment process. The white-light-emission of sample 1c makes the pentaborate a good candidate for display and lighting applications in the white LED.     

A new member of sodium titanates,Na2Ti9O19

A new compound of sodium nonatitanate, Na₂Ti₉O₁₉, has been prepared by the hydrothermal reactions of titanium dioxide gel with sodium hydroxide aqueous solution. The crystal has a C-centered monoclinic lattice with the unit-cell dimensions a = 12.2, b = 3.78, c = 15.3Å, and β = 98.0°. It is expected that the structure consists of a framework different from those in tri-, hexa-, hepta-, and octatianates.