Least-squares finite element method for radiation heat transfer in graded index medium

To avoid the complicated and time-consuming computation of curved ray trajectories, a least-squares finite element method based on discrete ordinate equation is extended to solve the radiative transfer problem in a multi-dimensional semitransparent graded index medium. Four cases of radiative heat transfer are examined to verify this least-squares finite element method. Linear and nonlinear graded index are considered. The predicted dimensionless net radiative heat fluxes are determined by the least-squares finite element method and compared with the results obtained by other methods. The results show that the least-squares finite element method is stable and has a good accuracy in solving the multi-dimensional radiative transfer problem in a semitransparent graded index medium, while the Galerkin finite element method sometimes suffers from nonphysical oscillations.     

Finite element method for radiation heat transfer in multi-dimensional graded index medium

In graded index medium, ray goes along a curved path determined by Fermat principle, and curved ray-tracing is very difficult and complex. To avoid the complicated and time-consuming computation of curved ray trajectories, a finite element method based on discrete ordinate equation is developed to solve the radiative transfer problem in a multi-dimensional semitransparent graded index medium. Two particular test problems of radiative transfer are taken as examples to verify this finite element method. The predicted dimensionless net radiative heat fluxes are determined by the proposed method and compared with the results obtained by finite volume method. The results show that the finite element method presented in this paper has a good accuracy in solving the multi-dimensional radiative transfer problem in semitransparent graded index medium.     

Discontinuous finite element method for radiative heat transfer in semitransparent graded index medium

To avoid the complicated and time-consuming computation of curved ray trajectories, a discontinuous finite element method based on discrete ordinate equation is extended to solve the radiative transfer problem in a multi-dimensional semitransparent graded index medium. Two cases of radiative heat transfer in two-dimensional rectangular gray semitransparent graded index medium enclosed by opaque boundary are examined to verify this discontinuous finite element method. Special layered and radial graded index distributions are considered. The predicted dimensionless net radiative heat fluxes and dimensionless temperature distributions are determined by the discontinuous finite element method and compared with the results obtained by the curved Monte Carlo method in references. The results show that the discontinuous finite element method has a good accuracy in solving the multi-dimensional radiative transfer problem in a semitransparent graded index medium.     

Radiative transfer equation for graded index medium in cylindrical and spherical coordinate systems

In graded index medium, the ray goes along a curved path determined by Fermat principle, and the curved ray-tracing is very difficult and complex. To avoid the complicated and time-consuming computation of curved ray trajectory, the methods not based on ray-tracing technique need to be developed for the solution of radiative transfer in graded index medium. For this purpose, in this paper the streaming operator along a curved ray trajectory in original radiative transfer equation for graded index medium is transformed and expressed in spatial and angular ordinates and the radiative transfer equation for graded index medium in cylindrical and spherical coordinate systems are derived. The conservative and the non-conservative forms of radiative transfer equation for three-dimensional graded index medium are given, which can be used as base equations to develop the numerical simulation methods, such as finite volume method, discrete ordinates method, and finite element method, for radiative transfer in graded index medium in cylindrical and spherical coordinate systems.     

Gauss–Newton reconstruction method for optical tomography using the finite element solution of the radiative transfer equation

The radiative transfer equation can be utilized in optical tomography in situations in which the more commonly applied diffusion approximation is not valid. In this paper, an image reconstruction method based on a frequency domain radiative transfer equation is developed. The approach is based on a total variation output regularized least squares method which is solved with a Gauss–Newton algorithm. The radiative transfer equation is numerically solved with a finite element method in which both the spatial and angular discretizations are implemented in piecewise linear bases. Furthermore, the streamline diffusion modification is utilized to improve the numerical stability. The approach is tested with simulations. Reconstructions from different cases including domains with low-scattering regions are shown. The results show that the radiative transfer equation can be utilized in optical tomography and it can produce good quality images even in the presence of low-scattering regions.     

A deficiency problem of the least squares finite element method for solving radiative transfer in strongly inhomogeneous media

The accuracy and stability of the least squares finite element method (LSFEM) and the Galerkin finite element method (GFEM) for solving radiative transfer in homogeneous and inhomogeneous media are studied theoretically via a frequency domain technique. The theoretical result confirms the traditional understanding of the superior stability of the LSFEM as compared to the GFEM. However, it is demonstrated numerically and proved theoretically that the LSFEM will suffer a deficiency problem for solving radiative transfer in media with strong inhomogeneity. This deficiency problem of the LSFEM will cause a severe accuracy degradation, which compromises the performance of the LSFEM too much and makes it not a good choice to solve radiative transfer in strongly inhomogeneous media. It is also theoretically proved that the LSFEM using the one dimensional linear element is equivalent to a second order form of radiative transfer equation discretized by the central difference scheme.     

Finite element approach for radiative transfer in multi-layer graded index cylindrical medium with Fresnel surfaces

Because the optical plane defined by the incidence and reflection direction at a cylindrical surface has a complicated relation with the local azimuthal angle and zenith angle in the traditional cylindrical coordinate system, it is difficult to deal with the specular reflective boundary condition in the solution of the traditional radiative transfer equation for cylindrical system. In this paper, a new radiative transfer equation for graded index medium in cylindrical system (RTEGCN) is derived based on a newly defined cylindrical coordinate system. In this new cylindrical coordinate system, the optical plane defined by the incidence and reflection direction is just the isometric plane of the local azimuthal angle, which facilitates the RTEGCN in dealing with cylindrical specular reflective boundaries. A least squares finite element method (LSFEM) is developed for solving radiative transfer in single and multi-layer cylindrical medium based on the discrete ordinates form of the RTEGCN. For multi-layer cylindrical medium, a radial basis function interpolation method is proposed to couple the radiative intensity at the interface between two adjacent layers. Various radiative transfer problems in both single and multi-layer cylindrical medium are tested. The results show that the present finite element approach has good accuracy to predict the radiative heat transfer in multi-layer cylindrical medium with Fresnel surfaces.     

多维梯度折射率介质内辐射传递的扩散近似

推导多维梯度折射率介质内稳态辐射传递的扩散近似方程.使用有限元法对扩散近似进行离散和求解,利用两个二维半透明介质的稳态辐射传递问题验证该扩散近似的精度及适用性.算例考虑介质为均匀折射率及梯度折射率两种情况.利用扩散近似分别求解辐射平衡时的边界热流、介质内温度场分布,并与辐射传递方程的求解结果进行对比分析.结果表明:介质折射率变化、散射特性、光学厚度及散射反照率均直接影响扩散近似的精度;在光学厚及强散射条件下,该扩散近似可以作为一种快速算法应用于梯度折射率介质稳态辐射传递的求解.     

Finite element method for modeling radiative transfer in semitransparent graded index cylindrical medium

Both Galerkin finite element method (GFEM) and least squares finite element method (LSFEM) are developed and their performances are compared for solving the radiative transfer equation of graded index medium in cylindrical coordinate system (RTEGC). The angular redistribution term of the RTEGC is discretized by finite difference approach and after angular discretization the RTEGC is formulated into a discrete-ordinates form, which is then discretized based on Galerkin or least squares finite element approach. To overcome the RTEGC-led numerical singularity at the origin of cylindrical coordinate system, a pole condition is proposed as a special mathematical boundary condition. Compared with the GFEM, the LSFEM has very good numerical properties and can effectively mitigate the nonphysical oscillation appeared in the GFEM solutions. Various problems of both axisymmetry and nonaxisymmetry, and with medium of uniform refractive index distribution or graded refractive index distribution are tested. The results show that both the finite element approaches have good accuracy to predict the radiative heat transfer in semitransparent graded index cylindrical medium, while the LSFEM has better numerical stability.     

求解辐射传递的非结构混合有限体积／有限元法

本文给了一种适用于任意非结构网格的有限体积/有限元法的混合算法用于求解多维半透明吸收、发射、散射性灰矩形介质内的辐射传递.该方法使用有限元法进行角度离散,有限体积法进行空间离散.与基于辐射传递离散坐标方程的方法不同的是,该方法在迭代求解的过程中,针对每一个空间体元,所有角度方向的辐射强度同时耦合求出.通过两个算例验证了该解法的正确性.     

矩形介质内辐射换热的有限元法

利用有限单元法离散求解辐射传递方程和能量控制方程.分别计算了边界为黑体和灰体条件下矩形吸收、发射、各向同性散射介质内的平均入射强度和温度分布,并同蒙特卡罗法(M-C法)计算结果进行了比较.     

非规则形状介质内辐射-导热耦合传热的间断有限元求解

采用间断有限元法(discontinuous finite element method,DFEM)求解非规则形状介质内的辐射导热耦合传热问题,得到了典型非规则形状介质内辐射导热耦合传热问题的高精度数值结果.和传统连续型有限元方法不同,DFEM将计算区域划分成相互独立的离散单元,形函数的构造、未知量的加权近似以及控制方程的求解均在每一个离散单元上进行.通过在单元之间施加迎风格式的数值通量,DFEM保证了整个计算区域的连续性,因此这种方法兼具良好的几何灵活性和局部守恒性.推导了辐射传输方程和能量扩散方程的射导热耦合传热问题,得到了典型非规则形状介质内辐射导热耦合传热的高精度数值结果.     

用射线踪迹法解黑表面矩形介质耦合换热

本文用射线踪迹-节点分析法研究了二维黑体表面矩形、各向同性散射半透明介质内辐射与导热瞬态耦合换热。采用全隐格式的有限差分法离散二维瞬态微分能量方程,用辐射传递系数来表示辐射源项,结合谱带模型并采用射线踪迹法求解辐射传递系数。采用Patankar线性化方法将辐射源项及不透明边界条件线性化,并采用附加源项法处理边界条件,运用ADI方法求解名以上的线性化方程组,从而解得二维矩形介质内的瞬态温度分布。     

一维瞬态辐射传输的有限元法模拟

随着超短脉冲激光的快速发展,吸收散射性介质内的瞬态辐射传输引起了人们的广泛关注.本文基于离散坐标法和最小二乘有限元法(LSFEM),提出了模拟多维吸收散射性介质内瞬态辐射传输的数值模型.该模型有效地克服了在标准Galerkin有限元法(GFEM)中发生的伪振荡现象,在时间步长较大的情况下仍然可以得到光滑无振荡的解.而且,最小二乘法产生的求解系数矩阵是对称正定的,与GFEM中的系数矩阵相比,仅需要存储一半的非零系数,可以应用许多高效的迭代求解方法进行求解.为了检验模型,本文研究了一维吸收散射性介质内瞬态辐射传输问题,其结果与蒙特卡洛法(MCM)和积分模型法(IE)的结果进行了比较,结果证实:本文的方法可以精确、高效地模拟参与性介质内的瞬态辐射传输.     

Prediction of radiative heat transfer in 3D complex geometries using the unstructured control volume finite element method

In this paper, a 3D algorithm for the treatment of radiative heat transfer in emitting, absorbing, and scattering media is developed. The numerical approach is based on the utilization of the unstructured control volume finite element method (CVFEM) which, to the knowledge of the authors, is applied for the first time to simulate radiative heat transfer in participated media confined in 3D complex geometries. This simulation makes simultaneously the use of the merits of both the finite element method and the control volume method. Unstructured 3D triangular element grids are employed in the spatial discretization and azimuthal discretization strategy is employed in the angular discretization. The general discretization equation is presented and solved by the conditioned conjugate gradient squared method (CCGS). In order to test the efficiency of the developed method, several 3D complex geometries including a hexahedral enclosure, a 3D equilateral triangular enclosure, a 3D L-shaped enclosure and 3D elliptical enclosure are examined. The results are compared with the exact solutions or published references and the accuracy obtained in each case is shown to be highly satisfactory. Moreover, this approach required a less CPU time and iterations compared with those of even parity formulation of the discrete ordinates method.     

Least-squares finite element formulations for one-dimensional radiative transfer

We present least-squares-based finite element formulations for the numerical solution of the radiative transfer equation in its first-order primitive variable form. The use of least-squares principles leads to a variational unconstrained minimization problem in a setting of residual minimization. In addition, the resulting linear algebraic problem will always have a symmetric positive definite coefficient matrix, allowing the use of robust and fast iterative methods for its solution. We consider space-angle coupled and decoupled formulations. In the coupled formulation, the space-angle dependency is represented by two-dimensional finite element expansions and the least-squares functional minimized in the continuous space-angle domain. In the decoupled formulation the angular domain is represented by discrete ordinates, the spatial dependence represented by one-dimensional finite element expansions, and the least-squares functional minimized continuously in space domain and at discrete locations in the angle domain. Numerical examples are presented to demonstrate the merits of the formulations in slab geometry, for absorbing, emitting, anisotropically scattering mediums, allowing for spatially varying absorption and scattering coefficients. For smooth solutions in space-angle domain, exponentially fast decay of error measures is demonstrated as the p-level of the finite element expansions is increased. The formulations represent attractive alternatives to weak form Galerkin finite element formulations, typically applied to the more complicated second-order even- and odd-parity forms of the radiative transfer equation.     

Transient coupled radiative and conductive heat transfer in a semitransparent layer of ceramic

This work considers transient radiative and conductive heat transfer in a semitransparent layer of ceramic, submitted to several thermal and radiative boundary conditions. Each side of the layer is exposed to hot or cold radiative surroundings, while each boundary is heated or cooled by convection. The solution procedure must provide accurate temperature distribution in the layer, so a nodal analysis based on Hottel's zonal method extended by ray tracing method is carried out. A finite difference method with non-uniform space and time increments is used to solve the transient energy equation, including a radiative heat source, coupled to a equation of radiative transfer. Variable spacing was used to concentrate grid points in regions with large temperature gradients. The influence of refractive index, optical thicknesses and conduction-radiation parameters is investigated.     

Hybrid finite volume/ finite element method for radiative heat transfer in graded index media

The rays propagate along curved path determined by the Fermat principle in the graded index medium. The radiative transfer equation in graded index medium (GRTE) contains two specific redistribution terms (with partial derivatives to the angular coordinates) accounting for the effect of the curved ray path. In this paper, the hybrid finite volume with finite element method (hybrid FVM/FEM) (P.J. Coelho, J. Quant. Spectrosc. Radiat. Transf., vol. 93, pp. 89–101, 2005) is extended to solve the radiative heat transfer in two-dimensional absorbing-emitting-scattering graded index media, in which the spatial discretization is carried out using a FVM, while the angular discretization is by a FEM. The FEM angular discretization is demonstrated to be preferable in dealing with the redistribution terms in the GRTE. Two stiff matrix assembly schemes of the angular FEM discretization, namely, the traditional assembly approach and a new spherical assembly approach (assembly on the unit sphere of the solid angular space), are discussed. The spherical assembly scheme is demonstrated to give better results than the traditional assembly approach. The predicted heat flux distributions and temperature distributions in radiative equilibrium are determined by the proposed method and compared with the results available in other references. The proposed hybrid FVM/FEM method can predict the radiative heat transfer in absorbing-emitting-scattering graded index medium with good accuracy.     

Application of the lattice Boltzmann method to transient conduction and radiation heat transfer in cylindrical media

In this paper, the lattice Boltzmann method (LBM) is applied to solve the energy equation of a transient conduction-radiation heat transfer problem in a two-dimensional cylindrical enclosure filled with an emitting, absorbing and scattering media. The control volume finite element method (CVFEM) is used to obtain the radiative information. To demonstrate the workability of the LBM in conjunction with the CVFEM to conduction-radiation problems in cylindrical media, the energy equation of the same problem is also solved using the finite difference method (FDM). The effects of different parameters, such as the grid size, the scattering albedo, the extinction coefficient and the conduction-radiation parameter on temperature distribution within the medium are studied. Results of the present work are compared with those available in the literature. LBM-CVFEM results are also compared with those given by the FDM-CVFEM. In all cases, good agreement has been obtained.     

Multiple size group analysis for transient radiative heating of particle polydispersions

The transient radiative heating of particle polydispersions initially at uniform temperature is numerically analyzed. Due to the different radiative heating characteristics between particles, the temperature evolution of particle changes with particle diameter. To take local thermal nonequilibrium between particles into consideration, the particles are discretized into several size groups. The radiative transfer equation in particle polydispersions and the transient energy equation for each particle group are solved by the discrete ordinates method and an implicit finite difference method, respectively. The effects of the standard deviation of particle diameter and the emissivity of particle surface on the thermal evolution of particle polydispersions are analyzed. The results show that, omitting thermal nonequilibrium of particles will result in significant errors in the calculation of radiative heat transfer, especially when the nonuniformity of particle diameter is large.