Determination of low-molecular-mass organic acids in any type of beer samples by coelectroosmotic capillary electrophoresis

A separation and determination of a mixture of 19 low-molecular-mass organic acids usually present in beer samples was developed using coelectroosmotic capillary zone electrophoresis. A polycation (hexadimetrine bromide, HDB) has been added to the electrolyte, which dynamically coats the inner surface of the capillary and causes a fast anodic electroosmotic flow. The main factors affecting reversal of the EOF such as type of modifier and concentration and influence of organic solvents were studied. Three types of modifiers, two alkylammonium salts (cethyltrimethylammonium bromide and tetradecyltrimethylammonium bromide) and a polycation (HDB) were investigated. The composition of the running buffer results on a 25% 2-propanol, 0.001% HDB and 50 mM sodium phosphate. The different instrumental parameters affecting the capillary electrophoretic separation were also optimized resulting on a -15 kV voltage with a hydrodynamic injection for 7 s with a UV detection at 210 nm. The applicability of the present method has been demonstrated for the determination of organic acids in different beer samples.     

Effects of addition of anionic and cationic surfactants to poly(N-isopropylacrylamide) microgels with and without acrylic acid groups

The interaction of the anionic surfactant sodium dodecyl sulfate (SDS) and the cationic surfactant hexadecyl trimethyl ammonium bromide with poly(N-isopropylacrylamide) (PNIPAAM) microgels with and without poly(acrylic acid) (PAA) was investigated by means of dynamic light scattering (DLS), zeta potential, and turbidimetry measurements. The DLS results show that the PNIPAAM microgels with PAA will contract when an anionic or cationic surfactant is added to the suspension, while the PNIPAAM microgels without PAA expand in the presence of an ionic surfactant. A collapse of the PNIPAAM microgels is observed when the temperature is increased. From the zeta potential measurements, it is observed that the charge density of PNIPAAM microgels in the presence of an ionic surfactant is significantly affected by temperature and the attachment of the negatively charged PAA groups. The turbidity measurements clearly indicate that the interaction between PNIPAAM and SDS is more pronounced than that of the cationic surfactant.     

Solution properties of hydrophobically modified acrylamide-based polysulfobetaines in the presence of surfactants

Polymer–surfactant interactions in aqueous solutions of a acrylamide-based, hydrophobically modified polysulfobetaine (ADS) containing 3-[N-(2-methacryloxylethyl)-N,N-dimethylammonio]-propane sulfonate and stearyl methylacrylate, with sodium dodedyl sulfate (SDS), N-dodecyl-N,N,N-trimethylammonium bromide (DTAB), and Triton X-100 were studied using surface tension, rheology, Rayleigh light scattering, and dynamic laser light scattering techniques. The purpose of this study was to highlight the influences of the surfactant structure and the nature of the surfactant head group on the polymer–surfactant interactions. The results show that the interaction and association between ADS and surfactants are distinctly varied depending on surfactant type and surfactant concentration. SDS produced the strongest interactions with ADS, while DTAB and Triton X-100 interact with ADS to a lesser degree, which is attributed to surfactant structure and the nature of the surfactant head group. For SDS and DTAB, there are two driving forces for the complexation of the polymer and surfactants, resulting from the electrostatic interaction and the hydrophobic association. However, for the nonionic surfactant Triton X-100, only hydrophobic association predominated in the interaction between ADS and the surfactant. The mechanism and reconstruction of the polymer–surfactant complexes have been evaluated and discussed.     

Interactions between zwitterionic and conventional anionic and cationic surfactants

Critical micelle concentration (cmc) values have been determined for the mixed zwitterionic/anionic surfactant systems of N-dodecyl-N,N-dimethyl-3-ammonio-1-propanesulfonate (ZW3-12)/sodium dodecyl sulfate (SDS), N-dodecyl-N,N-(dimethylammonio)butyrate (DDMAB)/SDS, N-octyl-N,N-dimethyl-3-ammonio-1-propanesulfonate (ZW3-08)/sodium octyl sulfate (SOS), and the zwitterionic/cationic systems of ZW3-12/dodecyltrimethylammonium bromide (DTAB), DDMAB/DTAB. Conductivity studies and nuclear magnetic resonance (NMR) spectroscopy were the methods employed for cmc determinations. The degree of nonideality of the interaction in the micelle (beta(m)), for each system, was determined according to Rubingh's nonideal solution theory. Evidence was found for the existence of strong interactions between zwitterionic and anionic surfactants in each of the zwitterionic/anionic systems. The ZW3-08/SOS and DDMAB/SDS systems behaved synergistically at all mole fractions studied while the ZW3-12/SDS system exhibited synergistic behavior above mole fractions of 0.30. Greater negative deviations from ideal behavior were demonstrated in the DDMAB/SDS system than in the other two zwitterionic/anionic systems. The zwitterionic/cationic systems of ZW3-12/DTAB and ZW3-08/OTAB displayed only slight deviations from ideal behavior, therefore indicating near ideal mixing.     

Effect of the phase state of the lipid bilayer on the structure and characteristics of the polycation-(anionic liposome) complex

Interaction of the cationic polymer poly-N-ethyl-4-vinylpyridinium bromide with bilayer vesicles (liposomes) composed of zwitterionic dipalmitoylphosphatidylcholine and anionic cardiolipin (the molar fraction of the negatively charged cardiolipin groups is 0.2) is studied. The composition and characteristics of the polycation-liposome complex are shown to be controlled by the phase state of the lipid membrane. Liposomes whose membranes exist in their LC state (“liquid” liposomes) keep their integrity in the complex with polycation. The adsorbed polycation can be completely removed from the liposomal membrane by the addition excess amounts of a competing polyanion. The adsorption of polycation on the surface of liposomes whose membranes exist the gel state (“solid” liposomes) leads to the formation of defects in the membrane, and the polycation’s adsorption with such liposomes becomes irreversible. The defects that form are also preserved when solid liposomes on whose surface the polycation is sorbed are transformed into the liquid state. Moreover, the reversible contact between polycation and liquid liposomes becomes irreversible once the liposomal membranes bound to the polycation transform into the solid state.     

PHOTOPHYSICAL STUDY OF THE SCHIFF BASES OF 5'-DEOXYPYRIDOXAL AND n-HEXYLAMINE IN CATIONIC MICELLES

Abstract-The absorption and fluorescence spectra of the Schiff bases formed between 5'-deoxypyridoxal and n-hex-ylamine in aqueous media containing different concentrations of the cationic surfactant hexadecyltrimethylammonium bromide were recorded at 25°C. The quantum yields of fluorescence of the different zwitterionic and enol forms of the chemical species of the Schiff bases occumng in media of pH 4.5–8.5 were determined. Also, the fluorescence quenching resulting from the presence of the surfactant and that of iodide ion were analyzed. From the results obtained it follows that the zwitterionic forms do not interact with the cationic surfactant, whereas the enol forms do interact with it.     

Complexation and competitive interpolyelectrolyte reactions involving a poly(<Emphasis Type="Italic">N</Emphasis>-oxyethyl-4-vinylpyridinium) cation

The interaction of a poly(N-oxyethyl-4-vinylpyridinium) cation with a polymethacrylate anion and DNA in aqueous and water-salt solutions has been studied by fluorescence quenching techniques with the use of pyrenyl-labeled polycarboxylic acid and the intercalating dye ethidium bromide. The presence of an OH group in each positively charged repeating unit of the polycation affects the stability of polyelectrolyte complexes against sodium chloride in a different manner. In the case of DNA, the destabilization of complexes is insignificant in the studied pH range (5.5–9.0). As regards the polymethacrylate anion, the complexes are stabilized and the transition from neutral to weakly acidic solutions causes an appreciable stabilization of the complex owing to formation of a system of hydrogen bonds between OH groups of a polycation and COOH groups of polycarboxylic acid. Despite a much higher stability of complexes based on a weakly ionized poly(methacrylic acid) against salt, in weakly acidic solutions, polycations predominantly bind to highly charged DNA, thus indicating the prevailing role of electrostatic interactions in complexation. The results of this study can be especially useful for designing pH responsive polyelectrolyte systems based on charged biopolymers (including polysaccharides) with controlled stability in water-salt solutions.     

Influence of sodium sulfate or sodium sulfite on the solubilization of benzylalcohol in cationic micellar solutions

The enthalpy of benzylalcohol (BzOH) solution has been determined as a function of alcohol concentration in aqueous trimethyltetradecylammonium bromide (TTAB) solutions in the presence of sodium sulfite or sodium sulfate up to high salt concentration. The electrolytes studied do not seem to induce TTAB sphere-torod transition at least up to 0.6 mol/kg of salt. Comparison with the enthalpic behavior of BzOH in sodium dodecylsulfate solutions and with that of 1-pentanol in both cationic and anionic micellar solutions suggests that the solubilization of BzOH in TTAB solutions is specifically favored by intramolecular interactions between alcohol molecules within the cationic micelles. The replacement of the bromide counterions by the sulfite or sulfate ions has been studied using potentiometry with an ionselective electrode in the case of trimethylhexadecylammonium bromide (CTAB). No difference could be detected between the effects of either divalent anions on the rate of change of the bromide ion-condensation with the salt/surfactant concentration ratioR. The degree of counter-ion condensation on micellar surface depends not only on theR values, but also on the total surfactant concentration.     

A study of the interaction of dodecyl sulfobetaine with cationic and anionic surfactant in mixed micelles and monolayers at the air/water interface

The miscibility and interactions between components in mixed adsorbed films and micelles containing zwitterionic (dodecyl sulfobetaine--DSB) and cationic (dodecyltrimethylammonium bromide) or anionic (sodium dodecyl sulfonate) surfactant, respectively, have been investigated. The molecular interactions have been quantified by the values of the excess free energy of adsorption (DeltaGS,Exc) and micelle formation (DeltaGM,Exc). The obtained results indicate nonideal behavior of the investigated mixtures since the values of DeltaGS,Exc and DeltaGM,Exc) are negative. Moreover, it has been found that DSB interact more strongly with anionic surfactant as compared to cationic surfactant owing to different structure of mixed monolayers and micelles.     

Modification of the electroosmotic flow and separation selectivity of anions in electrochromatography with pseudo-stationary phases of C14-alkyldimethylammoniopropane sulfonate zwitterionic surfactants by addition of salts to the background electrolyte

The effects of salts (NaCl, NaClO4, MgCl2, CeCl3) added to background electrolyte (BGE) solutions (10 mmol L(-1) sodium phosphate, pH 7.2) on electroosmotic flow (EOF) and the separation selectivity of anions (chloride, bromide, iodide, nitrite, nitrate, chlorate, thiocyanate, iodate, chromate, and molybdate ion) by capillary electrochromatography using the zwitterionic surfactant 3-(N,N-dimethylmyristylammonio)propane sulfonate (C14N3S) as a pseudo-stationary phase were investigated. There are two mechanisms affecting the separations: 1. the cations and anions of the added salts interact with the zwitterionic surfactant to varying degrees, thus changing the overall retention of the analytes; and 2. they change the EOF and the resulting apparent mobilities. It was shown that a BGE containing perchlorate and a low concentration of zwitterionic surfactant (2 mmol L(-1)) gave a stable and reproducible EOF and the concentration of perchlorate could be used to manipulate the separation selectivity for polarizable anions, such as iodide and thiocyanate. These effects are discussed in terms of measured association constants describing the interaction of anions and cations with the zwitterion.     

Encapsulation of Bromothymol Blue into a Polysiloxane Network Matrix in Presence of Surfactants

Bromothymol blue (BTB) pH indicator was encapsulated into polysiloxane network using the sol-gel process. Transparent monolithic disks of entrapped BTB were obtained in the presence of cetyl trimethyl ammonium bromide (CTAB) or dodecyl dimethyl amino oxide (Genaminox LA, GLA) surfactant. Ultraviolet visible spectra showed that the encapsulated BTB retains its structure in terms of its response to pH. The kinetic studies reveal that there was a faster response to pH in the case of GLA surfactant than in the case of CTAB. It is found that the co-entrapment of cationic surfactant CTAB or zwitterionic surfactant GLA with TEOS has shifted the equilibrium of the BTB to the ionized form due to the electrostatic interaction between the surfactant and the BTB anion and therefore the base form becomes more pronounced (e.g., shift from yellow to red) than that of sol-gel matrix without surfactant.     

正负离子表面活性剂与两性表面活性剂的相互作用

本文研究正负离子表面活性剂与两性表面活性剂混合水溶液的表面性质, 以及两性表面活性剂对正负离子裘面活性剂溶解度的影响。结果表明: (1) 两性表面活性剂的加溶作用,有助于正负离子表面活性剂的溶解; (2) 加入两性表面活性剂的量适当, 混合溶液基本保持原正负离子表面活性剂的表面活性; (3) 正负离子表面活性剂与两性表面活性剂在表面层和胶团中分子间的相互作用比正负离子表面活性剂与非离子表面活性剂分子间的相互作用稍强HC-FC正负; 离子表面活性剂与两性表面活性剂混合体系在表面层中有可能形成双分子或多分子层结构。     

The Influence on Interfacial Tension of the Combination of Anionic and Cationic Surfactants: Alkyl Sulfonate/Alkyltrimethylammonium Bromide

Mioellization of aqueous mixture of sodium octyl sulfonate ( C₈As )/ cetyltrimethylammonium bromide (CTAB) and sodium dodecyl sulfonate (C₁₂As)( CTAB in the presence of sodium bromide has been studied by surface tension measurement. Nonideal solution theory has been used to calculate the molecular interaction parameters (β^M and β^s). The oil-aqueous interfacial tensions of C₁₂As/ CTAB, C₈As/CTAB, C₁₂As/dodecyl trimethylammonium bromide (DTAB) systems were also measured. We studied the influence of the surfactant concentration, surfactant molar fraction ratio, hydrocarbon chain length, added NaCl and alcohol concentration on the interfacial tension.     

SANS studies of the effects of surfactant head group on aggregation properties in water/glycol and pure glycol systems

Aggregation in mixed water-glycol and pure glycol solvents has been investigated with four related surfactants, bearing common C12 tails: anionic, sodium dodecylsulfate (SDS); cationic, dodecyltrimethylammonium bromide (C12TAB); zwitterionic C12-amidopropyldimethylamine betaine (betaine) and nonionic, octaethyleneglycol monododecyl ether (C12E8). The solvent media were water, water/ethylene glycol, and water/propylene glycol mixtures, as well as pure ethylene glycol (EG) and propylene glycol (PG), spanning relative dielectrics epsilon(r) from 79 to 30. Results from small-angle neutron scattering (SANS) experiments, employing deuterated solvents, were consistent with the presence of ellipsoidal, or cylindrical micelles, depending on solvent and surfactant type. In pure EG and PG solvents the ionic and zwitterionic surfactants exhibit only weak aggregation, with much smaller micelles than normally found in water. However, interestingly, pure EG is identified as a solvent in which nonionic C12E8 aggregates strongly, mirroring the behavior in water. In contrast when the solvent is changed to PG (epsilonr=30) aggregation of C12E8 is only minimal. Hence, aggregation is shown to be strongly dependent on surfactant type and identity of the glycol solvent.     

Employment of a useful liquid membrane electrode system to characterise the micelles of bile salts and other detergents in pure and mixed states

Ion-pairs or coacervates (formed by the reaction between cationic and anionic surfactants) dissolved in nitrobenzene can behave as surfactant-ion registering devices to respond to both surfactant cation and anion. The complexes of cetyltrimethyl ammonium bromide with sodium dodecyl sulfate, sodium salts of deoxycholic and chenodeoxycholic acids, and Aerosol Orange T have been used in nitrobenzene to generate such useful liquid membranes. The complex of dimethyldioctadecyl ammonium bromide and sodium cholate has been used to study the cholate ion behaviour since its complex with cetyltrimethyl ammonium bromide is water soluble. The electrochemical behaviours of the liquid membranes have been found to be fairly good and reproducible. The membrane potential measurements have been used to determine the critical micelle concentrations of the surfactants in pure as well as in mixed states to evaluate surfactant—surfactant interaction in the micelles of the latter.     

Salt effect on the complex formation between cationic gemini surfactant and anionic polyelectrolyte in aqueous solution

Salt effect on the interaction of anionic polyelectrolyte sodium carboxymethylcellulose (NaCMC) with cationic gemini surfactant hexamethylene-1,6-bis(dodecyldimethylammonium bromide) [C12H25(CH3)2N(CH2)6N(CH3)2C12H25]Br2 (C12C6C12Br2) has been investigated using turbidimetric titration, steady-state fluorescence, and mobility measurement. It is found that the critical aggregation concentration(cac) for C12C6C12Br2/NaCMC complexes depends little on addition of sodium bromide (NaBr). However, in the presence of nonionic surfactant Triton X-100 (TX100), the critical ionic surfactant mole fraction for the onset of complex formation (Yc) increases markedly with increasing NaBr concentration. These salt effects are supposed as the overall result from competition between the increase of interaction and the screening of interaction. The increase of interaction is referred to as the effect that the larger micelle with higher surface charge density induced by salt has a stronger interaction with oppositely charged polyelectrolyte. The screening of interaction is referred to as the salt screening of electrostatic attraction between the polymer chain and the surfactant. For complex formation between C12C6C12Br2 and NaCMC, the increase of interaction probably compensates the screening of interaction, leading to constant cac values at different salt concentrations. For complex formation between the C12C6C12Br2/TX100 mixed micelle and NaCMC, the screening of interaction probably plays a dominant role, leading to higher suppression of electrostatic binding of micelles to polyelectrolyte.     

Micellization and synergistic interaction of binary surfactant mixtures based on sodium nonylphenol polyoxyethylene ether sulfate

Mixed micelle formation and synergistic interactions of binary surfactant combinations of sodium nonylphenol polyoxyethylene ether sulfate (NPES) with typical surfactants such as sodium dodecyl sulfate (SDS), Triton X-100 (TX100), cetyl trimethyl ammonium bromide (CTAB), and sodium bis(2-ethylhexyl) sulfosuccinate (AOT) at 25 degrees C in the presence of NaCl have been investigated. The critical micelle concentration of the binary mixtures has been quantitatively estimated by steady-state fluorescence measurements. The micellar characteristics such as composition, activity coefficients, and mutual interaction parameters have been estimated following different theoretical treatments. Investigation on the micellization and synergistic interaction of NPES with four kinds of surfactants showed that the behavior of the binary mixture deviated from the ideal state. The analysis revealed that the interaction parameter values (beta) varied with variation of solvent composition. Besides the strong electrostatic attraction between the oppositely charged surfactant NPES-CTAB mixture, the interaction between NPES and SDS also showed far more deviation from ideal behavior than that of TX100 and AOT. The reason for the synergism is also discussed and the results show that an ionic and a nonionic surfactant character existed concurrently in NPES due to the combination of a sulfate group and polyoxyethylene as a hydrophilic moiety. Zeta potential and diffusion coefficient measurements of micelles confirmed the synergistic interaction between the binary surfactants.     

Forces between glass surfaces in mixed cationic-zwitterionic surfactant systems

We report atomic force microscopy (AFM) measurements of the forces between borosilicate glass solids in aqueous mixtures of cationic and zwitterionic surfactants. These forces are used to determine the adsorption of the surfactant as a function of the separation between the interfaces (proximal adsorption) through the application of a Maxwell relation. In the absence of cationic surfactant, the zwitterionic surfactant N-dodecyl-N,N-dimethyl-3-ammonio-1-propanesulfonate (DDAPS) undergoes little adsorption to glass at concentrations up to about 2/3 critical micelle concentration (cmc). In addition, DDAPS does not have much effect on the forces over the same concentration range. In contrast, the cationic surfactant dodecylpyridinium chloride (DPC) does adsorb to glass and does affect the force between glass surfaces at concentrations much lower than the cmc. In the presence of a small amount of DPC (0.05 mM = cmc/300), the net force between the glass surfaces is quite sensitive to the solution concentration of DDAPS. A model-independent thermodynamic argument is used to show that the surface excess of DDAPS depends on the separation between the glass interfaces when the cationic surfactant is present and that the surface excess of the cationic surfactant is more sensitive to interfacial separation in the presence of the zwitterionic surfactant. The change in adsorption of the zwitterionic surfactant is explained in terms of an intermolecular coupling between the long-range electrostatic force acting on the cationic surfactant and the short-range hydrophobic interaction between the alkyl chains on the cationic and zwitterionic surfactants. The adsorptions of cationic and zwitterionic surfactants in mixtures were measured independently and simultaneously by attenuated total internal reflection infrared spectroscopy (ATR-IR). The adsorption of the zwitterionic surfactant is enhanced by the presence of a small amount of cationic surfactant.     

不同类型表面活性剂与高铁肌红蛋白相互作用

通过UV-Vis吸收光谱、同步荧光光谱、圆二色(CD)光谱等方法对阴离子型表面活性剂——琥珀酸二辛酯磺酸钠(AOT)和十二烷基苯磺酸钠(SDBS)、阳离子型表面活性剂——十六烷基三甲基溴化铵(CTAB)和十二烷基三甲基溴化铵(DTAB)、两性离子型表面活性剂——3-[(3-胆固醇氨丙基)二甲基氨基]-1-丙磺酸(CHAPS)与马心高铁肌红蛋白(metMb)的不同作用机理进行了探讨.结果显示:阴、阳离子型表面活性剂可以与蛋白发生较强烈的作用,且相互作用与表面活性剂的浓度密切相关.AOT和SDBS浓度的升高使得metMb的Soret带发生红移且出现两个新的Q带,伴随着配体金属电荷转移(LMCT)带的消失,蛋白从水合的六配位高自旋复合物(6-cHs)转化成六配位低自旋高铁血红素复合物(6-cLs),低浓度的AOT和SDBS对Tyr和Trp微环境均有影响,能使metMb的二级结构发生变化;而CTAB和DTAB在低浓度时对metMb的血红素中心影响不大,但是对Trp和Tyr的微环境影响很大,高浓度时主要通过静电吸引作用以聚合体形式直接作用于血红素中心,使Soret带发生蓝移,metMb形成五配位高自旋(5-cHs)复合物,血红素从疏水腔中释放出来,metMb的α螺旋含量减少.DTAB由于自身结构的特点,与CTAB作用于蛋白的过程有些区别,形成了一个中间态,但最终也导致血红素的暴露.两性离子型表面活性剂在测定浓度范围内不与metMb发生作用,原因是CHAPS整体呈电中性,其与metMb的阴离子性或者阳离子性位点作用的能力很弱,同时也说明metMb表面带相反电荷的位点相距较远.结果充分证明表面活性剂与蛋白相互作用的方式与表面活性剂的种类、结构及其浓度有关.     

Dilational viscoelasticity of anionic polyelectrolyte/surfactant adsorption films at the water–octane interface

In this article, the interfacial tension and interfacial dilational viscoelasticity of polystyrene sulfonate/surfactant adsorption films at the water–octane interface have been studied by spinning drop method and oscillating barriers method respectively. The experimental results show that different interfacial behaviors can be observed in different type of polyelectrolyte/surfactant systems. Polystyrene sulfonate sodium (PSS)/cationic surfactant hexadecanetrimethyl–ammonium bromide systems show the classical behavior of oppositely charged polyelectrolyte/surfactant systems and can be explained well by electrostatic interaction. In the case of PSS/anionic surfactant sodium dodecyl sulfate (SDS) systems, the coadsorption of PSS at interface through hydrophobic interaction with alkyl chain of SDS leads to the increase of interfacial tension and the decrease of dilational elasticity. For PSS/nonionic surfactant TX100 systems, PSS may form a sub-layer contiguous to the aqueous phase with partly hydrophobic polyoxyethylene chain of TX100, which has little effect on the TX100 adsorption film and interfacial tension.