Photonic generation of microwave signal using a dual-wavelength single-longitudinal-mode distributed Bragg reflector fiber laser

In this paper, a novel all-optical microwave generation technique based on a dual-wavelength single-longitudinal-mode (SLM) distributed Bragg reflector (DBR) fiber laser is proposed and demonstrated. By exploiting spatial hole burning (SHB) effect, this laser could provide stable dual-wavelength SLM operation with a wavelength separation of 0.088 nm corresponding to the microwave signal at 10.484 GHz with a 3 dB bandwidth of 28 kHz. By appropriately adjusting the pump power, dual-wavelength oscillation could be maintained at different temperatures. We have theoretically analyzed the mechanism for microwave generation of the proposed DBR laser, and the calculated microwave frequency is in good agreement with our experimental results. Furthermore, experimental observation shows both of the laser wavelengths and generated microwave signals have good stability at room temperature.     

Experimental analysis of true left-handed behaviour and transmission properties of composite metamaterials

We report the true left-handed transmission of a composite metamaterial (CMM) consisting of periodically stacked split-ring resonator (SRR) and wire elements. The negative permeability (μ < 0) gap is demonstrated explicitly by comparing SRR and closed-ring resonator structures. We confirm experimentally that the plasma cut-off frequency of the CMM is determined by the combined dielectric response of SRR and wire elements, and it is much lower than that of the wire-only medium. This is crucial to identify the left-handed transmission bands of the CMM. We further investigate the effect of intralayer and interlayer disorder on the transmission spectrum of CMM arising from misaligned fabrication and stacking of the SRR layers. We found that the intralayer disorder affects the μ < 0 gap of SRRs and the left-handed transmission band of CMM significantly, whereas the SRR transmission is rather immune to interlayer disorder.     

Localization and antilocalization in InSb and InAs antidot lattices

We report on the observation of localization, antilocalization and Altshuler–Aronov–Spivak (AAS) oscillations in antidot lattices patterned on high-mobility InSb/InAlSb and InAs/AlGaSb heterostructures. In addition, the antidot lattices display ballistic commensurability features. The strength of the localization peak in InSb antidot lattices decreases exponentially with temperature, with a high characteristic temperature of 25 K between 0.4 and 50 K. Analysis of the AAS oscillations enables the extraction of phase and spin coherence lengths in InAs.     

Diffractive multi-beam surface micro-processing using 10 ps laser pulses

A high repetition rate picosecond laser system is combined with a spatial light modulator (SLM) for diffractive multiple beam processing. The effect of the zero order beam is eliminated by adding a Fresnel zone lens (FZL) to defocus the un-diffracted beam at the processing plane. Chromatic dispersion, which is evident with a large bandwidth femtosecond pulses leading to the problem of distorted hole shape is eliminated due to the much narrower spectral bandwidth, 0.1 nm at 10 ps pulselength, resulting in highly uniform intensity spots, independent of diffraction angle. In addition, high-throughput processing is demonstrated by combining the high power laser output, 2.5 W at λ ≈ 1064 nm and fast repetition rate, f ≈ 20 kHz with P > 1.2 W diffracted into 25 parallel beams. This has the effect of creating an “effective” repetition rate of 500 kHz without restrictive scan speeds.     

The microwave induced resistance response of a high mobility 2DEG from the quasi-classical limit to the quantum Hall regime

Microwave induced resistance oscillations (MIROs) were studied experimentally over a very wide range of frequencies ranging from 20 GHz up to 4 THz, and from the quasi-classical regime to the quantum Hall effect regime. At low frequencies regular MIROs were observed, with a periodicity determined by the ratio of the microwave to cyclotron frequencies. For frequencies below 150 GHz the magnetic field dependence of MIROs waveform is well described by a simplified version of an existing theoretical model, where the damping is controlled by the width of the Landau levels. In the THz frequency range MIROs vanish and only pronounced resistance changes are observed at the cyclotron resonance. The evolution of MIROs with frequency is presented and discussed.     

新型八边形谐振环金属线复合周期结构左手材料奇异性质研究

通过实验及仿真研究了基于C环的新型八边形开口谐振环金属线复合周期结构左手材料.以金属铜八边形谐振环(SRRs)为基本单元的周期结构负磁导率材料,与闭口环(CSRRs)结果对比发现八边形谐振环能产生很好的谐振效果即能产生负磁导率;复合结构仿真结果显示,八边形谐振环金属线复合结构实现负折射具有可行性.设计、制作并实验和仿真研究了两种尺寸的八边形谐振环金属线复合周期结构左手材料,实验结果显示,分别在9.8—15GHz和9.5—15GHz出现良好负折射效应,表明小尺寸材料负折射频段较宽但整体能量透过率较小.通过与尺寸相近的传统C环样品实验对比发现八边形样品损耗较大,但其负折射区域能量分布比例较大,具有一定的优越性.该研究对新型周期结构左手材料的研究、设计和研制具有重要的科学意义,在国防、通信等领域也具有广阔的应用前景.     

The electrodeposition of copper onto UHV-prepared GaAs(0 0 1) surfaces

Synchrotron surface X-ray diffraction has been used to investigate in situ the morphology and epitaxy of monolayer amounts of copper electrodeposited from aqueous electrolyte onto ultra-high vacuum prepared, smooth, Ga- or As-terminated GaAs(0 0 1) surfaces. The fcc lattice of the epitaxial Cu islands is rotated by 5° and tilted by about 9° with respect to the GaAs substrate lattice, leading to eight symmetry equivalent domains of Cu islands terminated by {1 1 1} facets.     

Microwave dielectric properties of (1 − x)(Mg0.95Co0.05)TiO3–x(Na0.5La0.5)TiO3 ceramic system

The microstructures and the microwave dielectric properties of the (1 − x)(Mg_0.95Co_0.05)TiO₃–x(Na_0.5La_0.5)TiO₃ ceramic system were investigated. Two-phase system was confirmed by the XRD patterns and the EDX analysis. A co-existed second phase (Mg_0.95Co_0.05)Ti₂O₅ was also detected. The microwave dielectric properties are strongly related to the density and the matrix of the specimen. A new microwave dielectric material 0.88(Mg_0.95Co_0.05)TiO₃–0.12(Na_0.5La_0.5)TiO₃, possessing an excellent combination of dielectric properties: ε_r  22.36, Q × f  110,000 GHz (at 9 GHz), τ_f  2.9 ppm/°C), is proposed as a candidate dielectric for GPS patch antennas.     

Structure and properties of the one-dimensional cobalt oxide CaCo2O4

We have studied crystal structure and transport properties of the quasi one-dimensional cobalt oxide CaCo₂O₄. The CaCo₂O₄ phase crystallizes in calcium-ferrite type structure, which consists of a corner- and edge-shared CoO₆ octahedron network including one-dimensional double chains. Large thermoelectric power (S  150 μV/K at 390 K) with metallic temperature dependence of S, moderate resistivity (ρ  2.9 × 10⁻¹ Ω cm at 390 K) with carrier localization at low temperature, and normal thermal conductivity (κ  6.3 W/Km at 390 K) were observed. The phonon mean-free path was calculated from the observed data, as a function of temperature. The long phonon mean-free path (l  24 Å at 300 K) implies that the thermal conductivity could be suppressed by impurity scattering of phonons with partial element substitution.     

Optical and structural properties of InGaAs/InP double quantum wells grown by molecular beam epitaxy with polycrystalline GaAs and GaP decomposition sources

We report successful growth of high-quality InGaAs/InP double quantum wells (DQWs) with safer and more cost-effective decomposition source molecular beam epitaxy (MBE). The transmission electron microscopy (TEM) images and double crystal X-ray diffraction (TCXD) measurement reveal the formation of abrupt interfaces between InGaAs and InP layers. In the case of optical quality, the line width of 12 K-photoluminescence of the DQWs is 8.2 meV, which is comparable to that of single quantum well grown by MBE with PH₃ cracker and more complex instrument (4 meV).     

MRI dynamic range and its compatibility with signal transmission media

As the number of MRI phased array coil elements grows, interactions among cables connecting them to the system receiver become increasingly problematic. Fiber optic or wireless links would reduce electromagnetic interference, but their dynamic range (DR) is generally less than that of coaxial cables. Raw MRI signals, however, have a large DR because of the high signal amplitude near the center of k-space. Here, we study DR in MRI in order to determine the compatibility of MRI multicoil imaging with non-coaxial cable signal transmission. Since raw signal data are routinely discarded, we have developed an improved method for estimating the DR of MRI signals from conventional magnitude images. Our results indicate that the DR of typical surface coil signals at 3 T for human subjects is less than 88 dB, even for three-dimensional acquisition protocols. Cardiac and spine coil arrays had a maximum DR of less than 75 dB and head coil arrays less than 88 dB. The DR derived from magnitude images is in good agreement with that measured from raw data. The results suggest that current analog fiber optic links, with a spurious-free DR of 60–70 dB at 500 kHz bandwidth, are not by themselves adequate for transmitting MRI data from volume or array coils with DR 90 dB. However, combining analog links with signal compression might make non-coaxial cable signal transmission viable.     

From Zn microspheres to hollow ZnO microspheres: A simple route to the growth of large scale metallic Zn microspheres and hollow ZnO microspheres

Large scale metallic Zn microspheres and hollow ZnO microspheres are synthesized by thermal evaporation and vapor transport by heating a ZnO/graphite mixture at 1000 °C. Firstly, metallic Zn microspheres are fabricated with diameters in the range of 1–10 μm. The Zn microspheres are then annealed at 600 °C in air, which form hollow semiconducting ZnO microspheres. EDX and XRD spectra reveal that the oxidized material is indeed ZnO. Room temperature photoluminescence spectra of the oxidized material show a sharp peak at 380 nm and a wider broad peak centered at 490 nm. This growth mechanism is discussed and further investigated for other metallic and metal oxide microstructures.     

Field emission and room temperature ferromagnetism properties of triangle-like ZnO nanosheets

Triangle-like ZnO nanosheets have been synthesized via conventional thermal evaporation method at a low temperature of 550 °C using CuO as catalyst. The obtained samples were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), energy dispersive X-ray spectroscopy (EDX) and photoluminescence (PL) spectra. The great influences of Cu catalyst on the morphology of the obtained ZnO nanostructures were investigated. The field emission measurements confirmed that the ZnO nanosheets possessed good performance with a turn-on field of 3.1 V μm⁻¹ and a field enhancement factor of 3250, which have promising application as a competitive cathode material in FE microelectronic devices. Room temperatures ferromagnetism has been observed in the triangle-like ZnO nanosheets, although the products consist of only nonmagnetic elements.     

The effect of relative plasma plume delay on the properties of complex oxide films grown by multi-laser, multi-target combinatorial pulsed laser deposition

We report the effects of relative time delay of plasma plumes on thin garnet crystal films fabricated by dual-beam, combinatorial pulsed laser deposition. Relative plume delay was found to affect both the lattice constant and elemental composition of mixed Gd₃Ga₅O₁₂ (GGG) and Gd₃Sc₂Ga₃O₁₂ (GSGG) films. Further analysis of the plasmas was undertaken using a Langmuir probe, which revealed that for relative plume delays shorter than 200 μs, the second plume travels through a partial vacuum created by the first plume, leading to higher energy ion bombardment of the growing film. The resulting in-plane stresses are consistent with the transition to a higher value of lattice constant normal to the film plane that was observed around this delay value. At delays shorter than 10 μs, plume propagation was found to overlap, leading to scattering of lighter ions from the plume and a change in stoichiometry of the resultant films.     

Catalyst-free synthesis and luminescence of aligned ZnO nanorods

Quasi-aligned undoped ZnO nanorods with diameter in the range 100–300 nm and length of several micrometers have been grown catalyst-free on Si(1 0 0) wafer in a one-step process by direct heating of Zn powders. All nanowires are single crystals and are aligned vertically to the substrate surface with c-axis preferred orientation. XRD, HRTEM and Raman studies revealed that the ZnO nanorods have wurtzite phase, are highly crystalline and well aligned with the lattice parameters a=0.32 nm and c=0.52 nm. The PL spectra measured at different temperatures are dominated by excitonic emission at 380 nm and less intense below band gap emission band centered at 520 nm.     

Modification of photonic properties in porphyrin-infiltrated opal crystals

Structural, optical and magnetic properties of porphyrin-infiltrated opal hybrid structures were investigated. Bulk samples of synthetic opal were grown by sedimentation technique from colloidal solution of SiO₂ spheres of diameter 250 nm. The structure of the samples was examined by atomic force microscopy. The photonic properties of crystals were investigated by optical measurements in transmission and reflection modes. The stop band was observed in the region 510–550 nm. The photonic properties of synthetic opal crystals were modified by infiltration with aqueous basic solution of iron–porphyrin (FeTPPS) of concentration 1.0 mM. In hybrid samples the absorption bands typical of FeTPPS were observed in the vicinity of the opal stop band. Magnetic properties of FeTPPS-infiltrated opal samples have been studied at 5–300 K in magnetic fields up to 5 T. The FeTPPS-infiltrated opal crystals can be considered as the structures perspective for magnetophotonic devices.     

Nucleation, growth and morphology of Co thin films on Ag(1 1 0)

Scanning tunneling microscopy (STM) experiments reveal that Co growth on Ag(1 1 0), at coverages of Co < 1 ML and low substrate temperatures (150 K), involves a concomitant insertion of Co into the top Ag layer and exchange of Ag out onto the surface. At 300 K, coverages of Co > 1 ML gives rise to a 3D nanocluster growth on the surface, with the clusters covered by Ag. Depending slightly on coverage, the clusters have a typical diameter of 3 nm and a height of 0.4 nm. Upon annealing to 500 K, major changes are observed in the morphology of the surface. STM and AES show that there is a reduction of the number of Co islands on the surface, partly due to subsurface Co cluster migration and partly due to sintering into larger clusters.     

The pure rotational spectrum of ZnS (XΣ)

The pure rotational spectrum of ZnS (X¹Σ⁺) has been measured using direct-absorption millimeter/sub-millimeter techniques in the frequency range 372–471 GHz. This study is the first spectroscopic investigation of this molecule. Spectra originating in four zinc isotopologues (⁶⁴ZnS, ⁶⁶ZnS, ⁶⁸ZnS, and ⁶⁷ZnS) were recorded in natural abundance in the ground vibrational state, and data from the v = 1 state were also measured for the two most abundant zinc species. Spectroscopic constants have been subsequently determined, and equilibrium parameters have been estimated. The equilibrium bond length was calculated to be r_e  2.0464 Å, which agrees well with theoretical predictions. In contrast, the dissociation energy of D_E  3.12 eV calculated for ZnS, assuming a Morse potential, was significantly higher than past experimental and theoretical estimates, suggesting diabatic interaction with other potentials that lower the effective dissociation energy. Although ZnS is isovalent with ZnO, there appear to be subtle differences in bonding between the two species, as suggested by their respective force constants and bond length trends in the 3d series.     

Quantum confinement and interface structure of Si nanocrystals of sizes 3–5 nm embedded in a-SiO2

Spectroscopic ellipsometry and Monte Carlo simulations are employed to answer the fundamental question whether the energy gaps of Si nanocrystals with sizes in the range of 3–5 nm, which are embedded in amorphous silica, follow or deviate from the quantum confinement model, and to examine their interfacial structure. It is shown that the optical properties of these nanocrystals are well described by the Forouhi–Bloomer interband model. Analysis of the optical measurements over a photon-energy range of 1.5–5 eV shows that the gap of embedded nanocrystals with a mean size of 3.9 nm follows closely quantum confinement theory. A large band gap expansion (0.65 eV) compared to bulk Si is observed. The Monte Carlo simulations reveal a non-abrupt interface and a large fraction of interface oxygen bonds. This, in conjunction with the experimental observations, indicates that oxygen states and the chemical disorder at the interface have a negligible influence on the optical properties of the material in this size regime.     

Transmission grating spectrograph with on-line recording of XUV soft X-ray spectra from laser produced plasmas

The setting up and on-line operation of a transmission grating spectrograph in the XUV soft X-ray region is described. The detector was a microchannel plate–image intensifier combination, and the output of the image intensifier was coupled to a CCD camera–frame grabber system through an imaging lens. The spectrograph could be operated in the 5–20 Å range with 0.6 Å spectral resolution and in the 5–50 Å range with 1 Å resolution, respectively. The high sensitivity of the detector enables single shot operation, which is useful for several laser plasma interaction studies.