Volumetric and Viscometric Studies in Binary Liquid Mixtures of 2-Methyl-2-propanol with Some Ketones at Different Temperatures

Densities, ??, and viscosities, ??, of binary mixtures of 2-methyl-2-propanol with acetone (AC), ethyl methyl ketone (EMK) and acetophenone (AP), including those of the pure liquids, were measured over the entire composition range at 298.15, 303.15 and 308.15?K. From these experimental data, the excess molar volume $V_{\mathrm{m}}^{\mathrm{E}}$ , deviation in viscosity ????, partial and apparent molar volumes ( $\overline{V}_{\mathrm{m},1}^{\,\circ }$ , $\overline{V}_{\mathrm{m},2}^{\,\circ }$ , $\overline{V}_{\phi ,1}^{\,\circ}$ and $\overline{V}_{\phi,2}^{\,\circ} $ ), and their excess values ( $\overline{V}_{\mathrm{m},1}^{\,\circ \mathrm{E}}$ , $\overline{V}_{\mathrm{m,2}}^{\,\circ \mathrm{ E}}$ , $\overline {V}_{\phi \mathrm{,1}}^{\,\circ \mathrm{ E}}$ and $\overline{V}_{\phi \mathrm{,2}}^{\,\circ \mathrm{ E}}$ ) of the components at infinite dilution were calculated. The interaction between the component molecules follows the order of AP > AC > EMK.     

Synergistic extraction of europium and americium into nitrobenzene by using hydrogen dicarbollylcobaltate and bis(diphenylphosphino)methane dioxide

Extraction of microamounts of europium and americium by a nitrobenzene solution of hydrogen dicarbollylcobaltate (H⁺B^?) in the presence of bis(diphenylphosphino)methane dioxide (DPPMDO, L) has been investigated. The equilibrium data have been explained assuming that the species $ {\text{HL}}^{ + } $ , $ {\text{HL}}_{2}^{ + } $ , $ {\text{ML}}_{2}^{3 + } $ , $ {\text{ML}}_{3}^{3 + } $ and $ {\text{ML}}_{4}^{3 + } $ (M³⁺ = Eu³⁺, Am³⁺) are extracted into the organic phase. The values of extraction and stability constants of the species in nitrobenzene saturated with water have been determined. It was found that the stability constants of the corresponding complexes $ {\text{EuL}}_{n}^{3 + } $ and $ {\text{AmL}}_{n}^{3 + } $ , where n = 2, 3 and L is DPPMDO, in water–saturated nitrobenzene are comparable, whereas in this medium the stability of the cationic species $ {\text{AmL}}_{4}^{3 + } $ (L = DPPMDO) is somewhat higher than that of $ {\text{EuL}}_{4}^{3 + } $ with the same ligand L.     

Acid–Base Properties of the \mathrm{Fe}(\mathrm{CN})_{6}^{3-}/\mathrm{Fe}(\mathrm{CN})_{6}^{4-} Redox Couple in the Presence of Various Background Mineral Acids and Salts

The acid?Cbase behavior of $\mathrm{Fe}(\mathrm{CN})_{6}^{4-}$ was investigated by measuring the formal potentials of the $\mathrm{Fe}(\mathrm{CN})_{6}^{3-}$ / $\mathrm{Fe}(\mathrm{CN})_{6}^{4-}$ couple over a wide range of acidic and neutral solution compositions. The experimental data were fitted to a model taking into account the protonated forms of $\mathrm{Fe}(\mathrm{CN})_{6}^{4-}$ and using values of the activities of species in solution, calculated with a simple solution model and a series of binary data available in the literature. The fitting needed to take account of the protonated species $\mathrm{HFe}(\mathrm{CN})_{6}^{3-}$ and $\mathrm{H}_{2}\mathrm{Fe}(\mathrm{CN})_{6}^{2-}$ , already described in the literature, but also the species $\mathrm{H}_{3}\mathrm{Fe}(\mathrm{CN})_{6}^{-}$ (associated with the acid?Cbase equilibrium $\mathrm{H}_{3}\mathrm{Fe}(\mathrm{CN})_{6}^{-}\rightleftharpoons \mathrm{H}_{2}\mathrm{Fe}(\mathrm{CN})_{6}^{2-} + \mathrm{H}^{+}$ ). The acidic dissociation constants of $\mathrm{HFe}(\mathrm{CN})_{6}^{3-}$ , $\mathrm{H}_{2}\mathrm{Fe}(\mathrm{CN})_{6}^{2-}$ and $\mathrm{H}_{3}\mathrm{Fe}(\mathrm{CN})_{6}^{-}$ were found to be $\mathrm{p}K^{\mathrm{II}}_{1}= 3.9\pm0.1$ , $\mathrm{p}K^{\mathrm{II}}_{2} = 2.0\pm0.1$ , and $\mathrm{p}K^{\mathrm{II}}_{3} = 0.0\pm0.1$ , respectively. These constants were determined by taking into account that the activities of the species are independent of the ionic strength.     

Thermodynamic Analysis of Homologous α-Amino Acids in Aqueous Potassium Fluoride Solutions at Different Temperatures

Partial molal volumes ( $V_{\phi} ^{0}$ ) and partial molal compressibilities ( $K_{\phi} ^{0}$ ) for glycine, L-alanine, L-valine and L-leucine in aqueous potassium fluoride solutions (0.1 to 0.5?mol?kg^?1) have been measured at T=(303.15,308.15,313.15 and 318.15) K from precise density and ultrasonic speed measurements. Using these data, Hepler coefficients ( $\partial^{2}V_{\phi} ^{0}/\partial T^{2}$ ), transfer volumes ( $\Delta V_{\phi} ^{0}$ ), transfer compressibilities ( $\Delta K_{\phi} ^{0}$ ) and hydration number (n _H) have been calculated. Pair and triplet interaction coefficients have been obtained from the transfer parameters. The values of $V_{\phi} ^{0}$ and $K_{\phi} ^{0}$ vary linearly with increasing number of carbon atoms in the alkyl chain of the amino acids. The contributions of charged end groups ( $\mathrm{NH}_{3}^{+}$ , COO^?), CH₂ group and other alkyl chains of the amino acids have also been estimated. The results are discussed in terms of the solute?Ccosolute interactions and the dehydration effect of potassium fluoride on the amino acids.     

Free ions Pr IV (4\text{ f }^{2}) and Tm IV (4\text{ f }^{12}): intermediate versus LS coupling scheme

The intermediate and LS-coupling schemes for the free lanthanide ions $\text{ Pr }^{3+}$ Pr 3 + and $\text{ Tm }^{3+}$ Tm 3 + have been compared by the matrix elements of the tensor operator ${{\varvec{U}}}^{({\varvec{k}})}, \text{ k } = 2, 4, 6$ U ( k ) , k = 2 , 4 , 6 . The necessary eigenvectors and eigenvalues have been computed with the aid of four parameters, $\text{ F }_{2}, \text{ F }_{4}, \text{ F }_{6}$ F 2 , F 4 , F 6 , and $\zeta _{4\mathrm{f}}$ ζ 4 f , known from free-ion spectra of the same ions. It has been found that both coupling types for each ion lead to close values of ${\vert }{{\varvec{U}}}^{({\varvec{k}})}{\vert }^{2}$ | U ( k ) | 2 only for transitions from the ground level to certain lower-lying energy levels within the $4\text{ f }^\mathrm{N}$ 4 f N configuration.     

A thermodynamic study of complexation of 18-crown-6 with Zn2+, Tl+, Hg2+ and {\text{UO}}^{{{\text{2 + }}}}_{{\text{2}}} cations in acetonitrile-dimethylformamide binary media and study the effect of anion on the stability constant of (18C6-Na+) complex in methanol solutions

The equilibrium constants and thermodynamic parameters for complex formation of 18-crown-6(18C6) with Zn²⁺, Tl⁺, Hg²⁺ and $ {\text{UO}}^{{{\text{2 + }}}}_{{\text{2}}} $ cations have been determined by conductivity measurements in acetonitrile(AN)-dimethylformamide(DMF) binary solutions. 18-crown-6 forms 1:1 complexes [M:L] with Zn²⁺, Hg²⁺ and $ {\text{UO}}^{{{\text{2 + }}}}_{{\text{2}}} $ cations, but in the case of Tl⁺ cation, a 1:2 [M:L₂] complex is formed in most binary solutions. The thermodynamic parameters ( $ \Delta {\text{H}}^{ \circ }_{{\text{c}}} $ and $ \Delta {\text{S}}^{ \circ }_{{\text{c}}} $ ) which were obtained from temperature dependence of the equilibrium constants show that in most cases, the complexes are enthalpy destabilized but entropy stabilized and a non-monotonic behaviour is observed for variations of standard enthalpy and entropy changes versus the composition of AN/DMF binary mixed solvents. The obtained results show that the order of selectivity of 18C6 ligand for these cations changes with the composition of the mixed solvent. A non-linear relationship was observed between the stability constants (logK_f) of these complexes with the composition of AN/DMF binary solutions. The influence of the $ {\text{ClO}}^{ - }_{{\text{4}}} $ , $ {\text{NO}}^{ - }_{{\text{3}}} $ and $ {\text{Cl}}^{ - } $ anions on the stability constant of (18C6-Na⁺) complex in methanol (MeOH) solutions was also studied by potentiometry method. The results show that the stability of (18C6-Na⁺) complex in the presence of the anions increases in order: $ {\text{ClO}}^{ - }_{{\text{4}}} $  >  $ {\text{NO}}^{ - }_{{\text{3}}} $  >  $ {\text{Cl}}^{ - } $ .     

A mathematical approach to chemical equilibrium theory for gaseous systems—III: \hbox {Q}_\mathrm{p}, \hbox {Q}_\mathrm{c}, and \hbox {Q}_{\mathrm{x}}

The reaction quotient Q can be expressed in partial pressures as $\hbox {Q}_\mathrm{P}$ or in mole fractions as $\hbox {Q}_{\mathrm{x}}$ . $\hbox {Q}_\mathrm{P}$ is ostensibly more useful than $\hbox {Q}_{\mathrm{x}}$ because the related $\hbox {K}_{\mathrm{x}}$ is a constant for a chemical equilibrium in which T and P are kept constant while $\hbox {K}_{\mathrm{P}}$ is an equilibrium constant under more general conditions in which only T is constant. However, as demonstrated in this work, $\hbox {Q}_{\mathrm{x}}$ is in fact more important both theoretically and technically. The relationships between $\hbox {Q}_{\mathrm{x}}$ , $\hbox {Q}_\mathrm{P}$ , and $\hbox {Q}_{\mathrm{C}}$ are discussed. Four examples of applications are given in detail.     

Three–step method to determine the eutectic composition of binary and ternary mixtures

A three-step method to determine the eutectic composition of a binary or ternary mixture is introduced. The method consists in creating a temperature–composition diagram, validating the predicted eutectic composition via differential scanning calorimetry and subsequent T-History measurements. To test the three-step method, we use two novel eutectic phase change materials based on \(\mathrm{Zn}(\hbox {NO}_3)_2\cdot 6\mathrm{H}_{2}{\mathrm O}\) and \(\mathrm{NH}_4\mathrm{NO}_3\)   respectively \(\mathrm{Mn}(\hbox {NO}_3)_2\cdot 6\mathrm{H}_{2}{\hbox {O}}\) and \(\mathrm{NH}_4\mathrm{NO}_3\) with equilibrium liquidus temperatures of 12.4 and 3.9  \(\,^{\circ }\mathrm {C}\) respectively with corresponding melting enthalpies of 135 J \(\mathrm{g}^{-1}\) (237 J \(\mathrm{cm}^{-3}\) ) respectively 133 J \(\mathrm{g}^{-1}\) (225 J \(\mathrm{cm}^{-3}\) ). We find eutectic compositions of 75/25 mass% for \(\mathrm{Zn}(\hbox {NO}_3)_2\cdot \mathrm{6H}_{2}{\mathrm{O}}\) and \(\mathrm{NH}_4\mathrm{NO}_3\) and 73/27 mass% for \(\mathrm{Mn}(\hbox {NO}_3)_2\cdot 6\mathrm{H}_{2}{\mathrm{O}}\) and \(\mathrm{NH}_4\mathrm{NO}_3\) . Considering a temperature range of 15 K around the phase change, a maximum storage capacity of about 172 J \(\mathrm{g}^{-1}\) (302 J \(\mathrm{cm}^{-3}\) ) respectively 162 J \(\mathrm{g}^{-1}\) (274 J \(\mathrm{cm}^{-3}\) ) was determined for \(\mathrm{Zn}(\hbox {NO}_3)_2\cdot \mathrm{6H}_{2}{\mathrm{O}}\) and \(\mathrm{NH}_4\mathrm{NO}_3\) respectively \(\mathrm{Mn}(\hbox {NO}_3)_2\cdot \mathrm{6H}_{2}{\mathrm{O}}\) and \(\mathrm{NH}_4\mathrm{NO}_3\) .     

Photoelectrochemistry of silicon in HF solution

Photoelectrochemical, photoelectrocatalytic, and electrochemical processes of silicon anodic oxidation and hydrogen evolution in aqueous HF solution are discussed in terms of thermodynamic stability of Si, oxides SiO, SiO₂, and Si surface hydrides. It is shown that photoelectrochemical oxidation of n-type low-resistivity silicon to SiO₂ is catalyzed by Si $^{+}$ photo-hole formation, whereas in the case of p-type Si, the feasibility of this reaction is predetermined by p-type conductivity. It is suggested that anodic oxidation of Si goes through the stage of SiO oxide formation and its subsequent oxidation to SiO₂. Such mechanism accounts for chemical inertness of Si phase in HF solutions as well as for selective, anisotropic, and isotropic etching of Si within E ranges from $-0.5$ to 0.35 V, $0.35-0.8~V,$ and $E > 0.8$ V, respectively. Hydrogen evolution reaction on Si surface proceeds at very large overpotential ( $\geq 0.5$ V) through the stage of surface Si hydride formation: $\mathrm {Si + H_{2}O + e^{-} \rightarrow (SiH)_{surf} + OH^{-}}$ (the rate determining step) and $\mathrm {(SiH)_{surf} + H_{2}O + e^{-} \rightarrow Si + H_{2} + OH^{-}}$ . Illumination-related effects of surface reactions relevant to selective and anisotropic etching and nano/micro-structuring of Si surface are discussed.     

Solvent extraction of microamounts of strontium and barium into nitrobenzene by using synergistic mixture of hydrogen dicarbollylcobaltate and dicyclohexano-18-crown-6

Extraction of microamounts of strontium and barium by a nitrobenzene solution of hydrogen dicarbollylcobaltate (H⁺B^?) in the presence of dicyclohexano-18-crown-6 (DCH18C6, L) has been investigated. The equilibrium data have been explained assuming that the complexes HL⁺, $ {\text{HL}}_{ 2}^{ + } $ , ML²⁺ and $ {\text{ML}}_{ 2}^{ 2+ } $ (M²⁺ = Sr²⁺, Ba²⁺) are extracted into the organic phase. The values of extraction and stability constants of the species in nitrobenzene saturated with water have been determined. It was found that in the mentioned medium the stability constants of the complexes BaL²⁺ and $ {\text{BaL}}_{2}^{2 + }, $ where L = DCH18C6, are somewhat higher than those of the species SrL²⁺ and $ {\text{SrL}}_{2}^{2 + } $ with the same ligand L.     

Transport of Water by Group 1 and 2 Ions with t-Butyl Alcohol as Reference Substance: Comparison with Raffinose and Dioxan

Measurement of the transport of water with respect to the second solvent component in a binary aqueous mixture gives the Washburn number, $ w_{\text{W}} = (n_{\text{W}} )_{ + } t_{ + } - (n_{\text{W}} )_{ - } t_{ - } $ , in a transport number determination, where the ions move in opposite directions, and give the Erdey–Grúz number, $ \Upsigma n_{\text{W}} = (n_{\text{W}} )_{ + } + (n_{\text{W}} )_{ - } $ , in a diffusion experiment, where the ions move in the same direction. Here n _W and t are the number of water molecules and transport number, respectively, of the anion or cation. Combination of the results of these two experiments allows unambiguous determination of values for the solvent transport numbers, $ n_{\text{W}} $ , of the individual ions. While the values of $ n_{\text{W}} $ depend on the cosolvent, at high dilutions of the second component the highest value of $ n_{\text{W}} $ found, $ N_{\text{W}} $ , should approach the number of water molecules transported by the ion in pure water, $ N_{\text{W}}^{0} $ . New data for alkali-metal, alkaline-earth metal, hydrogen and halide ions in dilute mixtures of t-butyl alcohol with water are presented. Values of $ N_{\text{W}} $ rounded to whole numbers thus found are: 12 (Li⁺), 10 (Na⁺), 6 (K⁺), 5 (Rb⁺), 5 (Cs⁺), 1 (H⁺), 13 (Ca²⁺), 16 (Sr²⁺) and 15 (Ba²⁺). Factors influencing preferential solvation are briefly discussed. Detailed recalculations of $ n_{\text{W}} $ in the raffinose–water system from literature data also allows resolution of a problem with the Onsager Relations.     

Effect of size of tetraalkylammonium counterions on the temperature dependent micellization of AOT in aqueous medium

Different tetraalkylammonium, viz. N⁺(CH₃)₄, N⁺(C₂H₅)₄, N⁺(C₃H₇)₄, N⁺(C₄H₉)₄ along with simple ammonium salts of bis (2-ethylhexyl) sulfosuccinic acid have been prepared by ion-exchange technique. The critical micelle concentration of surfactants with varied counterions have been determined by measuring surface tension and conductivity within the temperature range 283–313 K. Counterion ionization constant, α, and thermodynamic parameters for micellization process viz., $\Delta G_m^{\text{0}} $ , $\Delta H_m^{\text{0}} $ , and $\Delta S_m^{\text{0}} $ and also the surface parameters, Γ_max and A_min, in aqueous solution have been determined. Large negative $\Delta G_m^{\text{0}} $ of micellization for all the above counterions supports the spontaneity of micellization. The value of standard free energy, $\Delta G_m^{\text{0}} $ , for different counterions followed the order $${\text{N}}^{\text{ + }} \left( {{\text{CH}}_{\text{3}} } \right)_4 >{\text{NH}}_{\text{4}}^{\text{ + }} >{\text{Na}}^{\text{ + }} >{\text{N}}^{\text{ + }} \left( {{\text{C}}_{\text{2}} {\text{H}}_5 } \right)_{\text{4}} {\text{ $>$ N}}^{\text{ + }} \left( {{\text{C}}_{\text{3}} {\text{H}}_{\text{7}} } \right)_4 >{\text{N}}^{\text{ + }} \left( {{\text{C}}_{\text{4}} {\text{H}}_{\text{9}} } \right)_4 $$ , at a given temperature. This result can be well explained in terms of bulkiness and nature of hydration of the counterion together with hydrophobic and electrostatic interactions.     

Solvent extraction of strontium and barium into nitrobenzene by using hydrogen dicarbollylcobaltate in the presence of dicyclohexano-24-crown-8

Extraction of microamounts of strontium and barium by a nitrobenzene solution of hydrogen dicarbollylcobaltate (H⁺B^?) in the presence of dicyclohexano-24-crown-8 (DCH24C8, L) has been investigated. The equilibrium data have been explained assuming that the complexes HL⁺, $ {\text{HL}}_{2}^{ + }, $ ML²⁺ and $ {\text{ML}}_{ 2}^{2 + } $ (M²⁺ = Sr²⁺, Ba²⁺) are extracted into the organic phase. The values of extraction and stability constants of the species in nitrobenzene saturated with water have been determined. It was found that in water–saturated nitrobenzene, the stability constants of the complexes BaL²⁺ and $ {\text{BaL}}_{ 2}{^{2 + }}, $ where L = DCH24C8, are somewhat higher than those of the corresponding species SrL²⁺ and $ {\text{SrL}}_{ 2}{^{2 + }} $ with the same ligand L.     

Density functional study on structures, stabilities, and electronic properties of size-selected Pd n Si q (n = 1–7 and q = 0, +1, −1) clusters

The density functional theory (DFT) calculations within the framework of generalized gradient approximation have been employed to systematically investigate the geometrical structures, stabilities, and electronic properties of Pd _n Si ^q (n = 1–7 and q = 0, +1, ?1) clusters and compared them with the pure ${\text{Pd}}_{n + 1}^{q}$ (n = 1–7 and q = 0, +1, ?1) clusters for illustrating the effect of doping Si atom into palladium nanoclusters. The most stable configurations adopt a three-dimensional structure for both pure and Si-doped palladium clusters at n = 3–7. As a result of doping, the Pd _n Si clusters adopt different geometries as compared to that of Pd _n+1. A careful analysis of the binding energies per atom, fragmentation energies, second-order difference of energies, and HOMO–LUMO energy gaps as a function of cluster size shows that the clusters ${\text{Pd}}_{4}^{ + }$ , ${\text{Pd}}_{4}$ , ${\text{Pd}}_{8}^{ - }$ , ${\text{Pd}}_{5} {\text{Si}}^{0, + , - }$ , and ${\text{Pd}}_{7} {\text{Si}}^{0, + , - }$ possess relatively higher stability. There is enhancement in the stabilities of palladium frameworks due to doping with an impurity atom. In addition, the charge transfer has been analyzed to understand the effect of doped atom and compared further.     

Positive ions of SiH4: Jahn-Teller-like distortions for {{\rm SiH}_{4}^{+}} and eventually molecular collapse on further ionisation.

We have recently studied by quantum-chemical calculations some fifteen tetrahedral and octahedral molecules. These seemingly disparate numerical tabulations were, it was demonstrated, pulled together by comparison with model semiclassical scaling laws for (i) nuclear–nuclear repulsion energy at the equilibrium geometry and (ii) total energies likewise. Here, we again appeal to such model scaling predictions, but now for positive ions of SiH₄. We then report Hartree-Fock equilibrium geometries and MP2 corrections. For ${{\rm SiH}_{4}^{+}}$ , we assumed the symmetry to be C_2v , by analogy with ${{\rm CH}_{4}^{+}}$ for which experimental confirmation of this symmetry is available. Larger distortions, but still for C_2v symmetry, are found from our quantum-chemical studies in the case of ${{\rm SiH}_{4}^{2+}}$ . But for ${{\rm SiH}_{4}^{3+}}$ there is a marked tendency to return to a configuration quite close to tetrahedral symmetry. But non-convergence is found for ${{\rm SiH}_{4}^{4+}}$ . Finally relations to the admittedly simplistic semiclassical geometry scaling predictions of Lawes and March are conjectured.     

Densities and Volumetric Properties of Butyl Acrylate + 1-Butanol, or +2-Butanol, or +2-Methyl-1-propanol, or +2-Methyl-2-propanol Binary Mixtures at Temperatures from 288.15 to 318.15 K

The densities, ρ, of binary mixtures of butyl acrylate with 1-butanol, 2-butanol, 2-methyl-1-propanol, and 2-methyl-2-propanol, including those of the pure liquids, were measured over the entire composition range at temperatures of (288.15, 293.15, 298.15, 303.15, 308.15, 313.15, and 318.15) K and atmospheric pressure. From the experimental data, the excess molar volume $ V_{\text{m}}^{\text{E}} $ V m E , partial molar volumes $ \overline{V}_{\text{m,1}} $ V ¯ m,1 and $ \overline{V}_{\text{m,2}} $ V ¯ m,2 , and excess partial molar volumes $ \overline{V}_{\text{m,1}}^{\text{E}} $ V ¯ m,1 E and $ \overline{V}_{\text{m,2}}^{\text{E}} $ V ¯ m,2 E , were calculated over the whole composition range as were the partial molar volumes $ \overline{V}_{\text{m,1}}^{^\circ } $ V ¯ m,1 ° and $ \overline{V}_{\text{m,2}}^{^\circ } $ V ¯ m,2 ° , and excess partial molar volumes $ \overline{V}_{\text{m,1}}^{{^\circ {\text{E}}}} $ V ¯ m,1 ° E and $ \overline{V}_{\text{m,2}}^{{^\circ {\text{E}}}} $ V ¯ m,2 ° E , at infinite dilution,. The $ V_{\text{m}}^{\text{E}} $ V m E values were found to be positive over the whole composition range for all the mixtures and at each temperature studied, indicating the presence of weak (non-specific) interactions between butyl acrylate and alkanol molecules. The deviations in $ V_{\text{m}}^{\text{E}} $ V m E values follow the order: 1-butanol < 2-butanol < 2-methyl-1-propanol < 2-methyl-2-propanol. It is observed that the $ V_{\text{m}}^{\text{E}} $ V m E values depend upon the position of alkyl groups in alkanol molecules and the interactions between butyl acrylate and isomeric butanols decrease with increase in the number of alkyl groups at α-carbon atom in the alkanol molecules.     

Electrogenerated chemiluminescence sensor for glutathione with Ru\left( {bpy} \right)_3^{2+ } -doped silica nanoparticles

An electrogenerated chemiluminescence (ECL) sensor for reduced glutathione was developed based on $ \mathrm{Ru}\left( {\mathrm{bpy}} \right)_3^{2+ } $ -doped silica nanoparticles-modified gold electrode (Ru-DSNPs/Au). These uniform Ru-DSNPs (about 58?+?4 nm) were prepared by a water-in-oil microemulsion method and characterized by transmission electron microscope and scanning electron microscope. With such a unique immobilization method, a considerable $ \mathrm{Ru}\left( {\mathrm{bpy}} \right)_3^{2+ } $ was immobilized three dimensionally on the electrode, which could greatly enhance the ECL response and thus result in an increased sensitivity. The ECL analytical performances of this sensor for reduced glutathione based on the quenched ECL emission of $ \mathrm{Ru}\left( {\mathrm{bpy}} \right)_3^{2+ } $ have been investigated in detail. Under the optimum condition, the ECL intensity was linear with the reduced glutathione concentration in the range of 1.0?×?10^?9 to 1.0?×?10^?4?mol?L^?1 (R?=?0.9971). This method has been successfully applied for the determination of reduced glutathione in serum samples with satisfactory results. The as-prepared ECL sensor for the determination of reduced glutathione displayed good sensitivity and stability.     

Density functional theoretical study of A series of pentazolide compounds \hbox{A}_{\it n}(\hbox{N}_5)_{\rm 6-{\it n}}^{\it q} (A = B, Al, Si, P, and S; n = 1–3; q = +1, 0, −1, −2, and −3)

The structure and the stability of pentazolide compounds $\hbox{A}_{\it n}(\hbox{N}_5)_{\rm 6-{\it n}}^{\it q}$ (A = B, Al, Si, P, and S; n= 1–3; q = +1, 0, ?1, ?2, and ?3), as high energy-density materials (HEDMs), have been investigated at the B3LYP/6-311+G* level of theory. The natural bond orbital analysis shows that the charge transfer plays an important role when the $\hbox{A}_{\it n}(\hbox{N}_5)_{\rm 6-{\it n}}^{\it q}$ species are decomposed to $\hbox{A}_{\it n}(\hbox{N}_5)_{\rm 5-{\it n}}\hbox{N}_3^{\it q}$ and N₂. The more negative charges are transferred from the N₂ molecule after breaking the N₅ ring, the more stable the systems are with respect to the decomposition. Moreover, the conclusion can be drawn that ${\hbox{Al}(\hbox{N}_5)_5^{2-}}$ and ${\hbox{Al}_2(\hbox{N}_5)_4^{2-}}$ are predicted to be suitable as potential HEDMs.     

Heat capacity and density of solutions of calcium and cadmium nitrates in N-methylpyrrolidone at 298.15 K

The heat capacity and density of solutions of calcium and cadmium nitrates in N-methylpyrrolidone (MP) at 298.15 K are studied by calorimetry and densimetry. The obtained data are discussed in relation to certain features of solvation and complex formation in solutions of these salts. The standard partial molar heat capacities and volumes ( $\overline {C_{p^2 }^0 }$ and $\overline {V_2^0 }$ ) of the electrolytes in MP are calculated. The standard heat capacities $\overline {C_{p^i }^0 }$ and volumes $\overline {V_i^0 }$ of Ca²⁺ and Cd²⁺ ions in MP at 298.15 K were determined, along with the contribution from specific interactions to the values of $\overline {C_{p^i }^0 }$ and $\overline {V_i^0 }$ of Cd²⁺ ions in MP solution.