Nucleophilic substitution of chlorobis(4-methoxyphenyl)methane: reactivity of carbenium ions in ILs-trifluoroethanol mixtures

The ionization of chlorobis(4-methoxyphenyl)methane (1-Cl) was performed in 1:1 mixtures of TFE/ILs (ILs = [emim][Tf₂N], [bmim][Tf₂N], [bpy][Tf₂N]), and TFE/CH₃CN. The decay of the immediately formed carbenium ion 1⁺ was followed by stopped flow, showing that the lifetime of this intermediate significantly decreases on going from CH₃CN to [emim][Tf₂N]. Ab initio calculations suggest an increase in the electrophilicity of the carbenium ion in ILs.     

Polar Substituent Effects in the Solvolysis of Acyclic Tertiary Chlorides Polar Effects VI

The influence of twenty substituents R on the solvolysis rates and products of tertiary chlorides R - CH₂CH₂C(CH₃)₂Cl (7) has been studied. H, CH₃, (CH₃)₂NCH₂, ClCH₂, Cl, CN and NO₂ exert an inductive effect only, as the good correlation of the rates with the corresponding inductive substituent constants σ shows. Bulkier alkyl groups, i.e. isopropyl and t-butyl, lower the rate due to a Baker-Nathan effect, while the n-electron donors CH₃S, CH₃O, HO and (CH₃)₂N and the σ-electron donors (CH₃)₃Sn and HOCH₂ cause rate increases based on σ constants. These accelerations are attributed to C,C-hyperconjugative and inductomeric effects which arise in the transition state for ionization. A comparison of the reactivity of the acyclic chlorides 7 and the corresponding 1-R-substituted 3-bromoadamantanes 1a shows that polar substituent effects are more strongly transmitted in the rigid bicyclic compounds 1a than in the flexible acyclic compounds 7.     

Fluorinated lignands in HPLC

Summary The chromatographic behaviour of C₆F₅(CH₂)₃SiCl₃, C₆H₅(CH₂)₃SiCl₃, CF₃(CF₂)₇CH₂CH₂SiCl₃ and n-C₁₀H₂₁SiCl₃ as well as the bonding of these ligands to silica is described. Phases with partially fluorinated ligands show entirely different chromatographic characteristics to analogous phases, where hydrogen replaces fluorine. The silica with the pentafluorophenyl-3-n-propyl-C₆F₅(CH₂)₃-ligand has higher k-values and a better selectivity for aromatic hydrocarbons than that with phenyl-3-n-propyl C₆H₅(CH₂)₃-groups, whereas the phase with the fluorinated carbon chain is less useful than the silica modified with n-decyltrichlorosilane n-C₁₀H₂₁SiCl₃. The first effect can be explained by complex formation, and the second may be due to a different contact area between the ligand and the solute. The normal hydrocarbon chains hinder each other sterically and expose many adsorption sites, in contrast the perfluorinated chains are sterically fixed and are the first example of real brushes in HPLC.     

Über die Synthese von 1,3-Dihydro-3-(2-dimethylaminoäthyl)-1-(3-thienyl)-benzimidazol-2-onen

The synthesis of 1-(3-thienyl)-benzimidazol-2-ones (3 a and4), described in an earlier paper¹, has been further investigated. The Na-salt of3 a is converted to a benzimidazolone substituted in position 3 (3 b). Dehydrogenation of the thiophene nucleus of3 a with chloranil yields5 a, which undergoes substitution in position 3 with Cl(CH₂)₂N(CH₃)₂ to give5 b. Monochlorination of5 a yields5 c, the structure of which is confirmed by¹H-NMR-spectroscopy.5 d is obtained by reaction of the Na-salt of5 c with Cl(CH₂)₂N(CH₃)₂.      

The carbenium ion - oxonium ion exchange processes related to vinyl and ring-opening polymerization

It has previously been proposed (Ref. 1) that in the cationic vinyl polymerizations, proceeding with termination due to the collapse of ion pairs, addition of bases increases “livingness”, because of the fast convertion of the otherwise dead (within the time of polymerization) covalent species into the onium ions; these, in turn, fast convert into carbenium ions, the actually propagating species. Equilibria between carbenium ions (CH₃OCH₂⁺A⁻ has been used as a model) and their onium counterparts ((CH₃)₂O taken as a model base) as well as between covalent species (CH₃OCH₂OSO₂CF₃) and the corresponding oxonium ion (with a (CH₃)₂O ligand) have been studied by dynamic ¹H and ¹⁹F NMR. Total ionization of methoxymethyl triflate (CH₃OCH₂OSO₂CF₃) has been shown to increase indeed from 10⁴ (-10°C) to 10⁶ (-70°C) times when 1,0 mol·L⁻¹ of (CH₃)₂O is added. Although this model system better describes polymerization of cyclic acetals than that of vinyl ethers, it shows at least qualitatively the importance of bases in ionization of covalent species, which may be responsible for reinitiation in the cationic polymerization of vinyl ethers.     

Carboxylic Acids and Their Anions. Acid and Ligand Properties

Calculated deprotonation energies of acids RCOOH (R = H, Me, CMe₃, CH₂Cl, CHCl₂, CCl₃, CH₂F, CHF₂, and CF₃) correlate satisfactorily with experimental pK _a values. The enhancing acid strength over this series is associated with the enhancing stabilization of the anionic forms, under the action of solvent inclusive. Carboxylate anions are characterized by a high proton affinity, excess electron density on the oxygen atoms, and low ionization energies of the highest occupied molecular orbitals. The anions of halogenated acids are slightly weaker donors than the anions of nonhalogenated acids. However, the fluorine derivatives have very low unoccupied ^* molecular orbitals favorable for -dative interaction with metal ions, which can provide additional stabilization of fluorocarboxylate coordination compounds.     

Radical addition of alkylbenzenes to α,α-dichlorovinyl compounds

Conclusions Toluene and p-xylene react with ,-dichloroolefins CCl₂=CHCH₂R (R = Cl, OCH₃, CH₂CH₃, and CH₂-CH₂ Cl) with tert-butyl peroxide initiation, to form adducts predominantly with the structure HCCl₂CH(CH₂C₆H₄X)-CH₂ R (X =p–CH₃), which corresponds to the orientation of the addition of the benzyl radicals to the -carbon atom of the chloroolefin with the formation of the more stable radicals. The formation of compounds CCl₂ = CHCH(CH₂C₆H₅)CH₂CH₂Y (Y = H and Cl) was also noted.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 8, pp. 1809–1812, August, 1976.     

Reaction of α,α,ω-trichloro- and α,α,α,ω-tetrachloroalkanes with alkali metal acylates in aprotic solvents

Polychloroalkanes and -alkenes R(CH₂)_nCl (R=CHCl₂CH₂, CCl₂=CH, n=1, 3) in dipolar aprotic solvents — dimethylformamide (DMF), dimethylsulfoxide (DMSO), hexamethylphosphoramide (HMPA) — at 130–150°C react selectively at the CH₂Cl group with salts of carboxylic acids RCO₂K(Na) to form dichloroesters RCO₂· (CH₂)_nR (R=CHCl₂CH₂, CCl₂=CH). In tetrachloroalkanes CCl₃CH₂(CH₂)_nCl (n = 1, 3, 5) under the same conditions the selectivity of the CCl₃ and CH₂Cl groups relative to the nucleophile RCO₂K(Na) is altered — unsaturated esters RCO₂(CH₂)_nCH=CCl₂ are formed in one stage with yields of 75–90%. Under the selected conditions, high conversion of polychloroalkanes to esters is attained 3 to 5 times more rapidly than in acid media. The structure of the ester obtained has been confirmed by their PMR spectra.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 12, pp. 2790–2793, December, 1990.     

Sol–gel synthesis of Zn-thiourea-SiO2 thin films from (EtO)3Si(CH2)3NHC(S)NHPh as molecular precursor

In order to study new and convenient sol–gel syntheses to homogeneous nanocomposites systems based on zinc sulphide clusters embedded in films of silica glass, a thiourea-functionalized silane ((EtO)₃Si(CH₂)₃NHC(S)NHPh, SilTu) was investigated as starting precursor. Electrospray ionization mass spectrometry (ESI-MS), FT-IR and NMR spectroscopies clearly evidence that SilTu coordinates Zn²⁺ ions in solution through the thiourea function. Both zinc acetate (Zn(CH₃COO)₂) and zinc chloride (ZnCl₂) were used as zinc source. The SilTuZn²⁺ complex is also stable under sol–gel conditions. Alcoholic solutions of SilTu, zinc acetate and tetraethoxysilane Si(OEt)₄ (TEOS) were used to prepare the thin films by dip-coating. Transparent, homogeneous and crack-free layers were obtained under annealing up to 600 °C. The samples were investigated by X-ray photoelectron spectroscopy (XPS) and secondary ion mass spectrometry (SIMS). Beside ZnS formation, the presence of oxygenated zinc species was observed inside the silica matrix.     

1-ethynyl-3-chloromethyltetramethyldisiloxane and some of its reactions

Conclusions The cohydrolysis of CH CSi(CH₃)₂OC₂H₅ with ClSi(CH₃)₂CH₂Cl gave the previously unknown 1-ethynyl-3-chloromethyltetramethyldisiloxane. The bromomagnesium derivatives of the latter were reacted with CH₂O, CH₃COCH₃, Br₂, and ClSi(CH₃)₃. In addition, the compound was subjected to hydrosilylation, entered into the diene condensation with hexachlorocyclopentadiene, and reacted with NaI, morpholine, and piperidine.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 8, pp. 1877–1880, August, 1976.     

An ab initio study of the electronic and steric structure of Cl<Subscript>2</Subscript>ZX molecules (Z = P and As)

The electronic and steric structure of the Cl₂ZX molecules [Z = P and As, X = C₂H₅, N(CH₃)₂, and OCH₃] was examined by RHF/6-31G(d) and MP2/6-31G(d) calculations. The data on the electron distribution at the Cl atoms are compared with the published ³⁵Cl NQR data. The main reason for a decrease in the NQR frequency of the molecules with X = N(CH₃)₂ and OCH₃ as compared to the ethyl-substituted compounds is an increase in the population of the 3p components of their p _z(p _σ) orbitals. With X = N(CH₃)₂, electron distribution at two Cl atoms differs significantly.     

Perfluormthyl-Element-Liganden. XVII. Adduktbildung von MenE(CF3)3−n-Liganden mit BX3-Verbindungen (Me = CH3; E = P,As, Sb; n = 0–3; X = H,CH3, Hal)

Perfluoromethyl-Element-Ligands. XVII. Formation of Adducts of Me_nE(CF₃)_3?n Ligands with BX₃ Compounds (Me = CH₃; E = P, As, Sb; n = 0–3; X = H, CH₃, Hal) The ligands Me_nE(CF₃)_3?n (Me = CH₃; E = P, As, Sb; n = 0–3) have been prepared (partly using new methods) and studied by n.m.r. spectroscopy (¹H, ¹⁹F, ³¹P, ¹³C). In order to deduce their relative donor strength their reactions with the Lewis acids “BH₃”, BMe₃, BMe₃, Me₂BBr, and BX₃ (X = F, Cl, Br) have been studied. Control of adduct formation occurs by n.m.r. spectroscopy (¹H, ¹⁹F). The following series of decreasing basicity or acidity are obtained:      

Luminophore-immobilized mesoporous silica for selective Hg sensing

Novel mesoporous silica-immobilized rhodamine (MSIR) and silica particle-immobilized rhodamine (SPIR) anchored by a tren (N(CH₂CH₂NH₂)₃) were synthesized. The binding and adsorption abilities of both MSIR and SPIR for metal cations were investigated with fluorophotometry and ion chromatography, respectively. Both MSIR and SPIR show selectivity for Hg²⁺ ion over other metal cations because the Hg²⁺ ion selectively induces a ring opening of the rhodamine fluorophores. The sensitivity of the MSIR for Hg²⁺ ion is greater than that of the SPIR and the MSIR adsorbs 70% of Hg²⁺ ion while the SPIR does only 40%. The MSIR can be also easily recovered by treatment of a solution of TBA⁺OH⁻. For the application of Hg²⁺ detection in the environmental field, the MSIR-coated glass plate is also developed and exhibits an excellent function in visual and fluorescence changes with Hg²⁺ ion.     

Osmium(IV) Binuclear Nonelectrolytic Oxo-Bridged Carboxylates. Molecular Structure of [Os2 IV(μ-O)(μ-O2CCCl3)2Cl4(PPh3)2] · CH2Cl2

The reactions between trans-[Os^VIO₂Cl₂L₂] (L = PPh₃, AsPh₃, SbPh₃) and carboxylic acids RCO₂H (R = CH₃, C(CH₃)₃, CH₂Cl, CCl₃, CF₃) are studied. The resulting binuclear compounds were found to have the general formula [Os₂ ^IV(-O)(-O₂CR)₂Cl₄(L)₂] (L = PPh₃; R = CH₃, C(CH₃)₃, CH₂Cl, CCl₃, CF₃, and L = AsPh₃; R = CH₃, CH₂Cl, CCl₃, CF₃). X-ray diffraction analysis revealed that the [Os₂ ^IV(-O)(-O₂CCCl₃)₂Cl₄(PPh₃)₂] · CH₂Cl₂ complex crystallizes in a triclinic system with space group P ; a = 10.747(2) Å, b = 19.291(4) Å, c = 24.614(5) Å, = 100.08(3)°, = 90.63(3)°, = 97.05(3)°, V = 4983.5(17) ų, Z = 4. The Os(-O)Os angle is 142.2(7)°. The interaction of trans-[Os^VIO₂Cl₂(SbPh₃)₂] with all the acids under study is attended by intramolecular redox reaction resulting in SbCl₂Ph₃.     

Ethylene polymerization with homogeneous Ziegler-Natta catalysts: theoretical study on the role of ion pairs in the polymerization mechanism

The thermodynamics of the reaction of an ethylene molecule with the Cp₂TiCH₃Cl/Al(CH₃)₂Cl system (Cp = η₅-C₅H₅), as a model for olefin polymerization with homogeneous Ziegler-Natta catalysts, was investigated via quantum mechanical DFT calculations. The comparison of the calculated energies for three possible titanium-olefin coordinated intermediates, the ionic complex Cp₂TiCH₃(C₂H₄)⁺/Al(CH₃)₂Cl, the bimetallic complex Cp₂TiCH₃(C₂H₄)^δ+ · Al(CH₃)₂Cl and the olefin-separated ion pair Cp₂TiCH/C₂H₄/Al(CH₃)₂Cl, shows that the most feasible polymerization mechanism occurs via olefin-separated ion pair.     

New versatile organyltellurium(IV) halides: Synthesis and X-ray structural features of the telluronium tellurolate salts [PhTe(CH3)2]2[TeX6] (X = Cl, Br) and [Ph3Te][PhTeX4] (X = Cl, Br, I)

TeX₄ (X = Cl, Br) react in HCl/HBr with [Ph(CH₃)₂Te]X (X = Cl, Br) to give [PhTe(CH₃)₂]₂[TeCl₆] (1) and [PhTe(CH₃)₂]₂[TeBr₆] (2). The reaction of PhTeX₃ (X = Cl, Br, I) in cooled methanol with [(Ph)₃Te]X (X = Cl, Br, I) leads to [Ph₃Te][PhTeCl₄] (3), [Ph₃Te][PhTeBr₄] (4) and [Ph₃Te][PhTeI₄] (5). In the lattices of the telluronium tellurolate salts 1 and 2, octahedral TeCl₆ and TeBr₆ dianions are linked by telluronium cations through Te?Cl and Te?Br secondary bonds, attaining bidimensional (1) and three-dimensional (2) assemblies. The complexes 3, 4 and 5 show two kinds of Te?halogen secondary interactions: the anion-anion interactions, which form centrosymmetric dimers, and two identical sets of three telluronium-tellurolate interactions, which accomplish the centrosymmetric fundamental moiety of the supramolecular arrays of the three compounds, with the tellurium atoms attaining distorted octahedral geometries. Also phenyl C-H?halogen secondary interactions are structure forming forces in the crystalline structures of compounds 3, 4 and 5.     

Chain termination catalyzed by 1,4-benzoquinones in the oxidation of 9,10-dihydrophenanthrene

Chain termination has been found to be catalyzed by 2,6-R-1,4-benzoquinones (R= H, CH₃, C(CH₃)₃, Cl) in the oxidation of 9,10-dihydrophenanthrene. The mechanism of this effect was elaborated. The oxidation chain termination stoichiometric coefficients at 50°C were found: f = 16 (H), 24 (CH₃). 31 (C(CH₃)₃),9 (Cl).Institute of Bioorganic Chemistry and Petroleum Chemistry, National Academy of Sciences of Ukraine, 1 Murmanskaya St. 252660 Kiev-96, Ukraine. Translated from Teoreticheskaya i Éksperimental'naya Khimiya Vol, 32. No. 1, pp. 32–35. January–February, 1996. Original article submitted April 17, 1995.     

Anion-molecular interaction through CH3 groups: Model ab initio studies

3-21G, 6–31G and 6–31 +G calculations have been performed on Cr…H₃CCl and LiCl…H₃CCl complexes with two different configurations each. Optimized geometries, stabilization energies, CH force constants and harmonic vibrational frequencies for CH₃Cl and its complexes are reported. Comparison of the calculated frequency shifts of CH-stretching bands of CH₃C1, on complexation, with experimental results of related systems indicate that the interaction of Cl^- with CH₃ group takes place in a linear manner with the CH bond. A lower frequency shift for LiCl…H₃CX with reference to the C1^-…H₃CX complexes is explained on the basis of the reduction of the basicity of Cl^- ion in the presence of counter ion in the former complex considered.     

Synthesis, structures and preliminary biological screening of bis(diphenyl)chlorotin complexes and adducts: Ph2ClSn-CH2-R-CH2-SnClPh2, R = p-C6H4, CH2CH2

The reaction between ClCH₂-R-CH₂Cl, R = p-C₆H₄, and [Ph₃Sn]⁻Li⁺ yields Ph₃Sn-CH₂-R-CH₂-SnPh₃ (1) in high yield. The related known compound R = CH₂CH₂ (1a) is synthesized by the reaction of the di-Grignard reagent BrMg(CH₂)₄MgBr with two equivalents of Ph₃SnCl. Cleavage of a single Sn-Ph group at each tin centre of both compounds using HCl/Et₂O yields the corresponding bis-chlorostannanes Ph₂ClSn-CH₂-R-CH₂-SnClPh₂, R = (CH₂)₄ (2) and R = C₆H₄ (3), respectively. Compounds 1, 2 and 3 are crystalline solid materials and their single crystal X-ray structures are reported. In the solid state both 2 and 3 form self-assembled ladder structures involving alternating intermolecular Cl-Sn?Cl and Cl?Sn-Cl bonded chains at both ends of the distannanes with 5-coordinate tin atoms. Recrystallization of 3 from CH₂Cl₂ in the presence of DMF yields the bis-DMF adduct (4) in which no self-assembled structures were noted. Evaluation of the chlorostannanes 2 and 3 against a suite of bacteria, Staphylococcus aureus, Escherichia coli and Photobacterium phosphoreum is reported and compared to the related mono-chlorostannanes Ph₂(CH₃)SnCl and Ph₂(PhCH₂)SnCl.     

Barriers to internal rotation in neopentylbenzenes substituted on the benzyl group. A 13C NMR band shape study

Two series of neopentylbenzenes with one or two substituents on the benzyl group have been synthesized. In one series the substituents were H, F, Cl, Br, I, OCH₃, OCOCH₃, OSi(CH₃)₃ CH₃ and CH₂CH₃, and in the other OH and R [R ? H, CH₃, CH₂CH₃, (CH₂)₃CH₃, CH(CH₃)₂ and C(CH₃)₃]. Barriers to internal C? C and C? C rotation have been estimated by ¹³C NMR band shape methods. Estimated barriers were found to increase as the size of the substituent increases. The results are discussed in terms of possible initial and transition states, based on summations of results from molecular mechanics (MM) calculations, using the Allinger MMP1 program. Barriers estimated experimentally are compared with results from other systems found in the literature.