Interaction forces measured between poly(N-isopropylacrylamide) grafted surface and hydrophobic particle

The interaction forces between poly(N-isopropylacrylamide) (PNIPAAm)-grafted surfaces and colloidal particles in an aqueous solution were investigated using an atomic force microscope. Measurements were conducted between smooth silicon wafers on which PNIPAAm was terminally grafted and silica particles hydrophobized with a silanating reagent in an aqueous electrolyte solution under controlled temperature. Below the lower critical solution temperature (LCST) of PNIPAAm, there were large repulsive forces between the surfaces, both on approach and separation of the surfaces. On the other hand, above LCST, attractive forces were observed both in approaching and in separating force curves. When surface hydrophobicity of the particles increased, the maximum attractive force tended to increase. The changes of hydration state of the grafted PNIPAAm chains depending on temperature are considered to greatly alter the interaction force properties. The role of the intermolecular interaction between the PNIPAAm chains and the hydrophobic particles in the interaction forces is discussed.     

Direct observation of the phase transition for a poly(N-isopropylacryamide) layer grafted onto a solid surface by AFM and QCM-D

The temperature-induced structural changes of a thermo-responsive poly(N-isopropylacrylamide) (PNIPAM) layer grafted onto a silica substrate were investigated in aqueous solution using an atomic force microscope (AFM) and a quartz crystal microbalance with dissipation (QCM-D). A PNIPAM layer was grafted onto the silicon wafer surface by free radical polymerization of NIPAM to obtain a high molecular weight polymer layer with low-grafting density overall. By AFM imaging, the transition of the grafted PNIPAM chains from a brush-like to a mushroom-like state was clearly visualized: The surface images of the plate were featureless at temperatures below the LCST commensurate with a brush-like layer, whereas above the LCST, a large number of domain structures with a characteristic size of approximately 100 nm were seen on the surface. Both frequency and dissipation data obtained using QCM-D showed a significant change at the LCST. Analysis of these data confirmed that the observed PNIPAM structural transition was caused by a collapse of the brush-like structure as a result of dehydration of the polymer chains.     

End‐grafting copolymers of styrene and 4‐vinylpyridine on an interacting solid surface

Copolymers of styrene and 4‐vinylpyridine with a styrene fraction f varying from 1 to 0 were grafted onto a silicon substrate in the melt. The grafting reaction and the stability of the grafted chains were investigated by Fourier transform infrared and X‐ray photoelectron spectroscopy. The thickness and surface morphology of the grafted copolymer layers were characterized with ellipsometry and atomic force microscopy (AFM). The copolymer chains were successfully grafted to the surface of the silicon substrate by a reaction between the hydroxyl groups of the nitroxide moiety at the end of the copolymers and the silanol groups on the surface of the silicon wafer. A measurement of the thickness of the grafted copolymer layers showed that the ratio of grafted‐layer thickness to the unperturbed chain radius of gyration decreased with the increasing fraction of 4‐vinylpyridine in the copolymer; this indicated that the grafted layer was strongly attracted to the substrate. In addition, an accelerated grafting process was observed at grafting times ranging from 48 to 72 h for pure poly(4‐vinylpyridine) and copolymers with f values of 0.3 and 0.5. AFM observation revealed that the grafted layers densely and homogeneously covered the silicon substrate. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1332‐1343, 2005     

Orientation of Antibodies on a 3-Aminopropyltriethoxylsilane-Modified Silicon Wafer Surface

An antibody can be specifically oxidized with periodate (NaIO₄) on the carbohydrate side chains at its C-terminal. Rabbit anti-hepatitis B surface antigen (anti-HBsAg) IgG antibodies were bound to the silicon wafer surface by covalent bonds between aldehydes generated on the carbohydrate side chains of the antibodies and the reactive amine groups of 3-aminopropyltriethoxylsilane(APTES)-modified silicon wafer surfaces. A control experiment was also performed by direct attachment of antibodies to glutaraldehyde-treated silicon surfaces. Two different coupling antibody strategies were investigated in this paper. Atomic force microscopy was used to observe the orientation of the site-directed and random attachment of rabbit anti-HBsAg IgG antibodies and the conservation of their antigen-binding capacity (AgBC) was assessed using an enzyme immunoassay (EIA).     

Reversible Addition‐fragmentation Chain Transfer Polymerization Grafted from Silicon Surface to Prepare Poly(methyl methacrylate) Brushes

通过共价键锚固链转移剂4-氰基-4-二硫代苯甲酰基戊酸琥珀酯于硅片表面,然后采用可逆加成-断裂链转移（RAFT）自由基聚合方法制备了聚甲基丙烯酸甲酯（PMMA）高分子刷. 聚合动力学研究表明,在反应进行2小时后,PMMA的厚度随聚合时间的增大而几乎呈线性增大,具有明显的活性聚合特征. 用椭圆偏光仪、X-光电子能谱（XPS）、原子力显微镜（AFM）及接触角测试对硅片表面的PMMA高分子刷进行了表征.     

Temperature-responsive chromatography for the separation of biomolecules

Temperature-responsive chromatography for the separation of biomolecules utilizing poly(N-isopropylacrylamide) (PNIPAAm) and its copolymer-modified stationary phase is performed with an aqueous mobile phase without using organic solvent. The surface properties and function of the stationary phase are controlled by external temperature changes without changing the mobile-phase composition. This analytical system is based on nonspecific adsorption by the reversible transition of a hydrophilic-hydrophobic PNIPAAm-grafted surface. The driving force for retention is hydrophobic interaction between the solute molecules and the hydrophobized polymer chains on the stationary phase surface. The separation of the biomolecules, such as nucleotides and proteins was achieved by a dual temperature- and pH-responsive chromatography system. The electrostatic and hydrophobic interactions could be modulated simultaneously with the temperature in an aqueous mobile phase, thus the separation system would have potential applications in the separation of biomolecules. Additionally, chromatographic matrices prepared by a surface-initiated atom transfer radical polymerization (ATRP) exhibit a strong interaction with analytes, because the polymerization procedure forms a densely packed polymer, called a polymer brush, on the surfaces. The copolymer brush grafted surfaces prepared by ATRP was an effective tool for separating basic biomolecules by modulating the electrostatic and hydrophobic interactions. Applications of thermally responsive columns for the separations of biomolecules are reviewed here.     

The role of few-asperity contacts in adhesion

The surface roughness of a few asperities and their influence on the work of adhesion is of scientific interest. Macroscale and nanoscale adhesion data have seemingly given inconsistent results. Despite the importance of bridging the gap between the two regimes, little experimental work has been done, presumably due to the difficulty of the experiment needed to determine how small amounts of surface roughness might influence adhesion data lying in between the two scales. To investigate the role of few-asperity contacts in adhesion, the pull-off force was measured between different sized atomic-force microscope (AFM) tips (with different roughnesses) and sample surfaces that had well-controlled material properties. There were seventeen tips of four different types, with radii from 200 nm to 60 microm. The samples were unpatterned single crystal silicon with a chemical silicon dioxide surface resulting from a standard silicon wafer clean. Some of the samples were treated with a few angstroms of vapor deposited diphenylsiloxane. We observed that the uncorrected (for surface roughness) pull-off force was independent of the radius of the AFM tip, which was contrary to all continuum-mechanics model predictions. To explain this behavior, we assumed that the interactions between the AFM tip and sample were additive, material properties were constant, and that the AFM tip, asperities, and sample surfaces were of uniform density. Based on these assumptions, we calculated a simple correction due to the measured root mean square (RMS) surface roughness of the AFM tips. The simple correction for the RMS surface roughness resulted in the expected dependence of the pull-off force on radius, but the magnitudes were higher than expected. Commercial and heat-treated AFM tips have minimal surface roughness and result in magnitudes that are more reliable. The relative uncertainty for the pull-off force was estimated to be 10%. In this paper, we derive how the cantilever and tip parameters contribute to the measured pull-off force and show how the corrected results compare with theory. Although much work is still needed, the work presented here should advance the understanding of adhesion between the macroscale and nanoscale regimes.     

Effects of graft densities and chain lengths on separation of bioactive compounds by nanolayered thermoresponsive polymer brush surfaces

We have prepared various poly(N-isopropylacrylamide) (PIPAAm)-grafted silica bead surfaces through surface-initiated atom transfer radical polymerization (ATRP) by changing graft densities and brush chain lengths. The prepared surfaces were characterized by chromatographic analysis using the modified silica beads as chromatographic stationary phases. ATRP initiator (2-(m,p-chloromethylphenyl)ethyltrichlorosilane) density on silica bead surfaces was modulated by changing the feed composition of the self-assembled monolayers (SAMs) of mixed silane coupling agents consisting of ATRP initiator and phenethyltrichlorosilane on the surfaces. IPAAm was then polymerized on SAM-modified silica bead surfaces by ATRP in 2-propanol at 25 degrees C. The chain length of the grafted PIPAAm was controlled by simply changing the ATRP reaction time at constant catalyst concentration. The thermoresponsive surface properties of the PIPAAm-grafted silica beads were investigated by temperature-dependent elution behavior of hydrophobic steroids from the surfaces using Milli-Q water as a mobile phase. On the surfaces grafted with shorter PIPAAm chains, longer retention times for steroids were observed on sparsely grafted PIPAAm surfaces compared to dense PIPAAm brushes at low temperature, because of hydrophobic interactions between the exposed phenethyl groups of SAMs on silica surfaces and steroid molecules. Retention times for steroids on dilute PIPAAm chain columns decreased with temperature similarly to conventional reverse-phase chromatographic modes on octadecyl columns. This effect was due to limited interaction of solutes with the PIPAAm-grafted surfaces. Retention times for steroids on dilute PIPAAm brush surfaces with longer PIPAAm chains became greater above the PIPAAm transition temperature. At low-temperature regions, hydrated and expanded PIPAAm at low temperatures prevented hydrophobic interactions between the phenethyl group of SAMs on the silica bead surfaces and steroid molecules. Retention times for steroids on a dense PIPAAm brush column increased with temperature since solvated polymer segments within the dense brush layer undergo dehydration over a broad range of temperatures. In conclusion, PIPAAm graft density has a crucial influence on the elution behavior of steroids because of the interaction of analytes with silica bead interfaces, and because of the characteristic dehydration of PIPAAm in dense-pack brush surfaces.     

High density cationic polymer brushes from combined “click chemistry” and RAFT‐mediated polymerization

A simple method for preparing cationic poly[(ar‐vinylbenzyl)trimethylammonium chloride)] [poly(VBTAC)] brushes was used by combined technology of “click chemistry” and reversible addition‐fragmentation chain transfer (RAFT) polymerization. Initially, silicon surfaces were modified with RAFT chain transfer agent by using a click reaction involving an azide‐modified silicon wafer and alkyne‐terminated 4‐cyanopentanoic acid dithiobenzoate (CPAD). A series of poly(VBTAC) brushes on silicon surface with different molecular weights, thicknesses, and grafting densities were then synthesized by RAFT‐mediated polymerization from the surface immobilized CPAD. The immobilization of CPAD on the silicon wafer and the subsequent polymer formation were characterized by X‐ray photoelectron spectroscopy, water contact angle measurements, grazing angle‐Fourier transform infrared spectroscopy, atomic force microscopy, and ellipsometry analysis. The addition of free CPAD was required for the formation of well‐defined polymer brushes, which subsequently resulted in the presence of free polymer chains in solution. The free polymer chains were isolated and used to estimate the molecular weights and polydispersity index of chains attached to the surface. In addition, by varying the polymerization time, we were able to obtain poly(VBTAC) brushes with grafting density up to 0.78 chains/nm² with homogeneous distributions of apparent needle‐like structures. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Force measurements on hydrophobized silica surfaces by using AFM

Force measurements between SiO₂ surfaces with and without adsorbed phenyl groups in aqueous media using the atomic force microscope (AFM) are compared. An oxidized silicon tip and an oxidized silicon wafer were hydrophobized with phenyl groups, and the long-range attraction induced by hydrophobation is shown in force vs. distance curves. The observed differences prove that the silanol groups of the unmodified SiO₂ surface are replaced by the phenyl groups. Received: 4 May 1998 / Revised: 1 July 1998 / Accepted: 5 July 1998     

Friction and adhesion between C60 single crystal surfaces and AFM tips: effects of the orientational phase transition

We have investigated the nanotribological properties of C60 single crystal (111) and (100) surfaces around its orientational order-disorder phase transition temperature, approximately 260 K, by atomic force microscopy and frictional force microscopy (AFM/FFM) in high vacuum. Results show that for both surfaces across the phase transition temperature, the friction force and the adhesive force between a C60 coated AFM tip and the C60 crystal surfaces exhibit discontinuous behavior. The friction force within the applied external load range in the low temperature phase is significantly larger than that in the high temperature phase, with no obvious change in the slope of the friction force curves (the friction coefficient) in the low and high temperature phases. The abrupt change in friction was found to be caused mainly by the abrupt change in adhesion, which, in turn, can be qualitatively understood through changes in the van der Waals interaction and the short-range Coulomb interaction associated with the structural changes across the phase transition. Compared to most other degrees of freedom, the rotation of C60 molecules was found to have little effect on friction and is an ineffective energy dissipation channel.     

Force measurements on hydrophobized silica surfaces by using AFM

Force measurements between SiO₂ surfaces with and without adsorbed phenyl groups in aqueous media using the atomic force microscope (AFM) are compared. An oxidized silicon tip and an oxidized silicon wafer were hydrophobized with phenyl groups, and the long-range attraction induced by hydrophobation is shown in force vs. distance curves. The observed differences prove that the silanol groups of the unmodified SiO₂ surface are replaced by the phenyl groups. Received: 4 May 1998 / Revised: 1 July 1998 / Accepted: 5 July 1998     

Functionalization of hydrogen-terminated silicon via surface-initiated atom-transfer radical polymerization and derivatization of the polymer brushes

Surface-initiated atom-transfer radical polymerization (ATRP) of poly(ethylene glycol) monomethacrylate (PEGMA) was carried out on the hydrogen-terminated Si(100) substrates with surface-tethered alpha-bromoester initiator. Kinetic studies confirmed an approximately linear increase in polymer film thickness with reaction time, indicating that chain growth from the surface was a controlled "living" process. The "living" character of the surface-grafted PEGMA chains was further ascertained by the subsequent extension of these graft chains, and thus the graft layer. Well-defined polymer brushes of near 100 nm in thickness were grafted on the Si(100) surface in 8 h under ambient temperature in an aqueous medium. The hydroxyl end groups of the poly(ethylene glycol) (PEG) side chains of the grafted PEGMA polymer were derivatized into various functional groups, including chloride, amine, aldehyde, and carboxylic acid groups. The surface-functionalized silicon substrates were characterized by reflectance FT-IR spectroscopy and X-ray photoelectron spectroscopy (XPS). Covalent attachment and derivatization of the well-defined PEGMA polymer brushes can broaden considerably the functionality of single-crystal silicon surfaces.     

表面温敏聚合物刷的原子力显微镜和石英晶体微天平研究

通过表面引发的原子转移自由基聚合在硅片表面制备了聚（N-异丙基丙烯酰胺）（PNIPAAm）聚合物刷。用原子力显微镜（AFM）分别研究了PNIPAAm的接枝动力学、温度和溶剂性质对厚度的影响以及PNIPAAm链与原子力针尖间的粘附力。结果表明,PNIPAAm链在硅片表面的生长具有很好的可控性。常温下厚度为33nm的PNIPAAm膜在水溶液中的增加到82.4nm;而在甲醇/水（v/v,1:1）溶液中,PNIPAAm分子链处于坍塌收缩状态,厚度降低为45nm;在55℃下干燥所得厚度则仅为22nm。力-距离测量结果表明,在溶液中,PNIPAAm链与原子力针尖之间的粘附力远小于在干态下的粘附力。用石英晶体微天平（QCM-D）对PNIPAAm的可逆相转变进行了研究,结果表明PNIPAAm分子链随温度变化的构象转变是发生在30-34℃之间的连续过程。     

Surface‐initiated atom transfer radical polymerization grafting of poly(2,2,2‐trifluoroethyl methacrylate) from flat silicon wafer surfaces

Poly(2,2,2‐trifluoroethyl methacrylate) (PTFEMA), a partially fluorinated polymer, was directly grafted from silicon wafer surfaces by a surface‐initiated atom‐transfer radical polymerization (ATRP). The polymer layer thickness increased linearly with monomer conversion and molecular weight of free polymers in solution. The thickness was mainly determined by the experimental conditions such as activator/deactivator ratio, monomer/catalyst ratio, and monomer concentration. PTFEMA layers of more than 100‐nm thick were obtained. The grafted PTFEMA chains were “living” and allowed the extension of a second block of PMMA. X‐ray photoelectron spectroscopy study showed that the chemical compositions at the surfaces agreed well with their theoretical values. A novel surface‐attachable difunctional initiator was also synthesized and applied to the grafting of PTFEMA. The grafting density was doubled using this difunctional initiator, from 0.48 to 0.86 chains/nm². © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1252–1262, 2006     

Thermally induced sign change of Soret coefficient for dilute and semidilute solutions of poly(N-isopropylacrylamide) in ethanol

We studied the thermal diffusion behavior of poly(N-isopropylacrylamide) (PNiPAM) in ethanol in a temperature range from T = 14.0 degrees C to T = 40.0 degrees C by means of thermal diffusion forced Rayleigh scattering. The obtained Soret coefficient S(T) of PNiPAM was positive for lower temperatures (T < 34 degrees C), while S(T) showed a negative value for higher temperatures (T > 34 degrees C). This means PNiPAM molecules move to the cold side for temperatures T < 34 degrees C, whereas they move to the warm side for T > 34 degrees C. This is the first nonaqueous polymeric system for which a sign change with temperature has been observed. We performed static and dynamic light scattering experiments in the same temperature range. The second virial coefficient determined from dilute solutions by static light scattering (SLS) was positive in the comparable temperature range. The results of SLS for the semidilute solution showed a strong repulsion among PNiPAM chains which was enhanced by increasing temperature. These results imply that the observed thermally induced sign change of S(T) does not depend on the intermolecular interactions among PNiPAM chains.     

Effect of rubbing-induced polymer chain alignment on adhesion and friction of glassy polystyrene surfaces

The friction and adhesion properties of polystyrene surfaces are studied below the glass transition temperature by means of atomic force microscopy in argon. Even at a temperature far below the glass transition, the repeated sliding of a polystyrene bead tip on the non-cross-linked polystyrene surface causes significant reduction of friction and adhesion forces. There is no measurable wear of the polystyrene surface due to repeated sliding. These decreases are associated with the alignment of the outermost polymer segments induced by repeated rubbing. There are only little changes in friction and adhesion on the cross-linked polystyrene surface in which the covalent cross-linking prevents chain realignment.     

Microcantilever sensing and actuation with end-grafted stimulus-responsive elastin-like polypeptides

Stimulus-responsive elastin-like polypeptides (ELPs) grafted onto surfaces are of significant technical interest because they can be exploited for force generation, in sensing applications, or as molecular switches with tunable properties. Changes in the conformational state of grafted ELPs, induced by a phase transition or changes in osmotic pressure, lead to significant changes in the surface stress in the ELP graft layer and translate into detectable changes in microcantilever deflection. In this study, we investigate the conformational mechanics of ELPs in response to changes in solution pH and ionic strength using atomic force microscopy (AFM) microcantilever deflection and quartz crystal microbalance (QCM) measurements. We show that the use of genetically encoded, surface-grafted ELPs is exciting for cantilever actuation and sensing because commonly available microfabricated cantilever springs offer a simple and nonintrusive way to detect changes in solvent type, temperature, and pH, promising great potential for sensing applications in microfluidic devices.     

甲基丙烯酸甲酯/苯乙烯在硅片表面的RAFT接枝聚合

将3-(2-二硫代苯甲酸基丙酰氧基)丙基二甲基甲氧基硅烷化学键合于硅片表面.以甲基丙烯酸甲酯和苯乙烯为单体,在硅片表面进行可逆加成-断裂链转移(RAFT)接枝聚合.X-射线光电子能谱仪证实聚甲基丙烯酸甲酯(PMMA)、聚苯乙烯(PS)、苯乙烯/甲基丙烯酸甲酯的共聚物(poly(MMA-co-St))都接枝到硅片表面.但3个体系表现出不同的性质,甲基丙烯酸甲酯的RAFT聚合可控性差,分子量比设计分子量大得多,分子量分布指数宽,接枝密度仅为0·03chains/nm2;苯乙烯均聚合的活性/可控性好、分子量分布窄,接枝密度提高到0·21chains/nm2;共聚合体系综合了两个均聚体系的优点,分子量分布较窄,接枝密度最高为0·31chains/nm2,聚合物膜厚随转化率、数均分子量基本呈线性增长.     

One step growth of protein antifouling surfaces: monolayers of poly(ethylene oxide) (PEO) derivatives on oxidized and hydrogen-passivated silicon surfaces

We compare two routes for creating protein adsorption-resistant self-assembled monolayers (SAMs) by chemical modification of silicon surfaces with poly(ethylene oxide) (PEO) oligomeric derivatives. The first route involves the assembly of 2-methyl[(polyethyleneoxy)propyl]trichlorosilane (Cl3SiMPEO) films onto oxidized silicon surfaces (OH-SiO(x)) either by a liquid-phase process at room temperature or by a gas-phase process at 423 K, producing Si-O-Si bonds between the substrate and the organic layer. The second pathway makes use of the assembly of poly(ethylene glycol methyl ether) (MPEG) films onto hydrogen-passivated silicon surfaces (H-Si) using a liquid-phase process at 353 or 423 K, leading to the formation of Si-O-C bonds between the substrate and the organic layer. Structural investigation by X-ray reflectometry (XRR) reveals that the thickness and surface densities of the grafted PEO monolayers strongly depend on experimental conditions such as temperature and grafting time. Atomic force microscopy (AFM) shows that very smooth and homogeneous monolayers can be obtained with average roughnesses close to those measured on the corresponding bare substrates. Finally, the antifouling properties of the modified silicon surfaces were evaluated by X-ray photoelectron spectroscopy (XPS), using a membrane protein (P.69 antigen) as model protein. Both types of PEO monolayers exhibit excellent protein repellency, as soon as the grafting density is equal to or higher than 1.7 chains/nm2.