Matrimid5218/PSf双层非对称中空纤维膜的制备及其气体分离性能研究

以商业化聚酰亚胺Matrimid5218作为功能层材料,聚砜作为支撑层材料,采用共挤出法制备双层非对称中空纤维气体分离膜.所制备的双层非对称中空纤维膜具有致密无缺陷的超薄皮层,致密皮层厚度约为0.21μm.在25℃,0.5 MPa下,CO2/CH4的选择性系数达51.39,CO2的渗透系数为46.29 GPU,O2/N2的选择性系数达到7.13,O2的渗透速率为6.38 GPU.考察了温度和压力对膜的渗透系数和选择性系数的影响,并考察了物理老化对膜性能的影响.     

Matrimid®5218/PSf双层非对称中空纤维膜的制备及其气体分离性能研究

以商业化聚酰亚胺Matrimid®5218作为功能层材料, 聚砜作为支撑层材料, 采用共挤出法制备双层非对称中空纤维气体分离膜. 所制备的双层非对称中空纤维膜具有致密无缺陷的超薄皮层, 致密皮层厚度约为0.21 μm. 在25 ℃, 0.5 MPa下, CO2/CH4的选择性系数达51.39, CO2的渗透系数为46.29 GPU, O2/N2的选择性系数达到7.13, O2的渗透速率为6.38 GPU. 考察了温度和压力对膜的渗透系数和选择性系数的影响, 并考察了物理老化对膜性能的影响.     

PEBAX®2533/PSf中空纤维复合膜制备及阻力性能

采用浸渍涂层法制备了聚醚共聚酰胺(PEBAX®2533)/聚砜(PSf)中空纤维复合膜. 考察了涂层液浓度、 温度和基膜预处理对复合膜结构、 阻力及渗透性能的影响, 并考察了操作压力对膜渗透性能的影响. 实验结果表明, 随着涂层液浓度的增加, 复合膜致密层厚度及阻力增大, 复合膜总阻力及支撑层阻力先增大后减小, CO2渗透速率先减小后增大, 分离系数增大. 随着涂层温度升高, 复合膜致密层厚度及阻力减小, 支撑层阻力增大, 复合膜总阻力先减小后增大, 分离系数和渗透速率先增大后减小. 经过预处理, 复合膜致密层厚度减小、 阻力大幅度减小, CO2渗透速率增大58%, 分离系数略有下降. 复合膜支撑层阻力过大, 尤其是支撑层的致密结构影响复合膜的塑化行为.     

老化对聚(1-三甲基硅基-1-丙炔)气体渗透性能的影响

采用溶液浇铸法,制备了厚度为50~202 μm的聚(1-三甲基硅基-1-丙炔)(PTMSP)膜,研究了膜厚度、储存温度以及储存气氛对其气体渗透性能的影响。 在室温下储存时,PTMSP膜发生物理老化,气体渗透系数先是迅速下降,然后缓慢降低并趋向平稳。 在空气气氛中的下降速率要略大于在N2气气氛中。 气体渗透系数的下降速率随膜厚度的减小而增大。 在高温(100 ℃)空气气氛中,受物理及化学老化的共同作用,PTMSP膜气体渗透系数的下降速率进一步增大,IR谱图表明,聚合物氧化生成了C=O等极性基团。 随储存时间的延长,溶解度系数基本不变,扩散系数的下降是导致气体渗透系数下降的主要原因,这与聚合物体积松弛和(或)致密化及极性基团的形成所造成的自由体积的减小紧密相关。     

添加PVP和涂覆聚合物对PAN基中空纤维炭膜性能的影响

研究了用ＰＡＮ基中空纤维膜为基质制备气体分离用中空纤维炭膜的过程。考察了添加剂ＰＶＰ对炭膜的Ｈ２，Ｎ２气体渗透速率，分离系九和柔韧性的影响。同时，研究了用丙烯腈共聚物对中空纤维炭膜涂覆改性后Ｈ２，Ｎ２气体的渗透速率和分离系数。     

含有聚醚链段的可溶性聚酰亚胺气体分离膜材料及其性能

将4,4'-六氟亚异丙基-邻苯二甲酸酐(6FDA)和1,3-苯二胺(mPDA)与二端氨基聚醚缩聚, 得到含有聚醚柔性链段的聚酰亚胺气体分离膜材料. 所合成的共聚聚酰亚胺在N-甲基吡咯烷酮(NMP)和四氢呋喃(THF)等有机溶剂中具有良好的溶解性能. 研究了O2, N2, H2, CH4和CO2在聚酰亚胺均质膜中的渗透性能, 考察了二端氨基聚醚的含量、链长和化学结构对气体渗透性能的影响. 结果表明, 聚醚链段的引入增大了气体的扩散系数, 气体的渗透系数显著增大; 聚醚链段与CO2相对较强的相互作用, 增大了对CO2/N2的溶解选择性, CO2/N2的分离性能优于CO2/CH4, 同时CO2比H2优先透过膜.     

分离丙烯/丙烷的超薄聚电解质中空纤维复合膜的制备

以含二氮杂萘联苯结构的聚芳醚砜酮PPESK(Tg为263~305℃)为膜材料,以干-湿纺丝技术制备基膜,外涂法涂覆聚电解质(聚乙烯基吡咯烷酮PVP)并络合Ag 离子,制备了超薄皮层中空纤维复合膜,皮层厚度约为1μm。研究了复合膜聚电解质涂层PVP质量分数、Ag 含量、气体压力差、测试温度和不同过渡金属离子等对复合膜丙烯/丙烷分离性能的影响。结果表明,在压力为200kPa、温度为23℃下,当PVP质量分数为10%、n(Ag )∶n(CO)=1∶1的条件下,复合膜对丙烯渗透率可达16.32GPU,分离系数为4.79。     

多孔基体负载的碳纳米管复合膜制备及其气体渗透性能

采用改进的浮动催化法在多孔Al2O3基体上制备了垂直取向的碳纳米管阵列, 并用旋转喷涂法将聚苯乙烯填充于碳纳米管的空隙, 进一步将其制备成复合碳纳米管膜, 研究了H2和CO2单组分在碳纳米管复合膜中的渗透性能, 实验结果表明, H2/CO2的理想分离系数随着复合膜中碳管管径的减小而增大, 在管径较小的复合膜中, 气体渗透分离系数高于努森扩散限制, 达到6.25, 具有一定的分离效果. 两种气体在复合膜中的渗透率随着渗透温度的增加而减小.     

聚酰亚胺,聚砜,聚醚砜及其共混改性中空纤维膜用于醇／醚气？…

甲醇／甲基叔丁基醚的分离是目前具有实用意义的重要研究课题之一,采用气流哆扫式操作,研究了聚酰亚胺、不同结构的聚砜中空纤维膜在不同操作条件下,对甲醇／甲基叔丁基醚气相混合体系的分离性能,也研究共混改性对分离膜性能的影响。结果表明,各种材料的膜具有相近的分离行为,即随着气相中甲醇含量的增加,透过通量逐渐增大而分离系数逐渐减小,聚酰亚胺膜具有适中的透过通量,但具有很高的分离系数,在甲醇浓度低于２０％时,     

同质编织管增强型聚丙烯腈中空纤维膜研究

利用二维编织技术将聚丙烯腈(PAN)纤维编织成中空编织管,以聚丙烯腈为成膜聚合物,以聚乙二醇为成孔剂,配制铸膜液,采用同心圆纺丝法制备同质编织管增强型聚丙烯腈中空纤维膜.研究结果表明,所得同质编织管增强型聚丙烯腈中空纤维膜的表面分离层具有类似于非对称膜的结构,铸膜液可渗入编织管纤维束中;随着编织管编织节距的增大,同质编织管增强型聚丙烯腈中空纤维膜表面分离层厚度减小,同时膜的平均孔径增大,膜的纯水通量随之增大;铸膜液渗入编织管纤维束的现象未影响膜的通透性能;编织管的断裂强度最大可达100 MPa以上.通过水浴振荡、超声波水浴振荡及等力拉伸3种方法测试了同质编织管增强型中空纤维膜和异质编织管增强型中空纤维膜中编织管与表面分离层之间的界面结合性能,结果表明前者的界面结合性能优于后者.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.