Characterization of cellulose acetates by nuclear magnetic resonance

An NMR method for determining the distribution of acetyl groups in cellulose acetates was developed. Treatment of cellulose acetates with acetyl-d₃ chloride gave products having simple spectra which could be analyzed quantitatively to give the distribution of acetyl groups in the original sample. The method was applied to studying (1) the hydrolysis of cellulose triacetate with ammonia, (2) the acetylation of cellulose acetate with acetyl chloride, and (3) the acetylation of cellulose acetate with acetic anhydride.     

FT Raman spectroscopic investigation of cellulose acetate

This study reports on a new method characterizing cellulose acetates and determining the contents of acetyl groups within cellulose acetates based on FT Raman spectroscopy. Cellulose acetates exhibiting diverse degrees of substitution ascribed to acetyl groups (DS_Ac) were obtained after the deacetylation of highly acetylated cellulose, i.e. cellulose diacetate and cellulose triacetate (CTA), with aqueous sodium hydroxide solution or 1,6-hexamethylenediamine (HMDA). After plotting the Raman intensity ratios between the bands at 1,740 and 1,380 cm⁻¹ against the DS_Ac, a calibration curve with high correlation coefficient of more than 0.99 was obtained. During the deacetylation of highly acetylated cellulose, a by-product—sodium acetate (NaOAc)—forms as the most possible salt among others. In order to determine the content of NaOAc, the mixtures of cellulose acetates and NaOAc were measured with FT Raman spectroscopy. Based on the relationship between the Raman intensity ratios as I₉₂₉/I₁₃₈₀ and the contents of NaOAc in the mixtures, a calibration curve exhibiting high correlation coefficient of more than 0.99 was generated.     

Chromatographic retention prediction and octanol-water partition coefficient determination of monobasic weak acidic compounds in ion-suppression reversed-phase liquid chromatography using acids as ion-suppressors

Although simple acids, replacing buffers, have been widely applied to suppress the ionization of weakly ionizable acidic analytes in reversed-phase liquid chromatography (RPLC), none of the previously reported works focused on the systematic studies about the retention behavior of the acidic solutes in this ion-suppression RPLC mode. The subject of this paper was therefore to investigate the retention behavior of monobasic weak acidic compounds using acetic, perchloric and phosphoric acids as the ion-suppressors. The apparent octanol-water partition coefficient (K^″ow) was proposed to calibrate the octanol-water partition coefficient (Kow) of these weak acidic compounds, which resulted in a better linear correlation with log kw, the logarithm of the hypothetical retention factor corresponding to neat aqueous fraction of hydroorganic mobile phase. This log K^″ow−log kw linear correlation was successfully validated by the results of monocarboxylic acids and monohydrating phenols, and moreover by the results under diverse experimental conditions for the same solutes. This straightforward relationship not only can be used to effectively predict the retention values of weak acidic solutes combined with Snyder-Soczewinski equation, but also can offer a promising medium for directly measuring Kow data of these compounds via Collander equation. In addition, the influence of the different ion-suppressors on the retention of weak acidic compounds was also compared in this RPLC mode.     

Reversed phase liquid chromatography of PCBs as a basis for the calculation of water solubility and log Kow for polychlorobiphenyls

Summary Water solubility (S _w) and log K _ow values have been determined for 154 possible polychlorobiphenyls using the retention indices obtained by RP-HPLC and structurally selected PCB congeners with known log K _ow values for the regression lines. The water solubility data are melting point corrected.

---

Umkehrphasen-Flüssig-Chromatographie von PCBs als Grundlage zur Berechnung der Wasserlöslichkeit und des log K _ow für Polychlorbiphenyle

---

Dedicated to Prof. Dr. W. Fresenius on the occasion of his 75th birthday     

Property Comparison of Cellulose Acetate Prepared Homogenously in Different Ionic Liquids

Cellulose acetates were synthesized homogeneously in four types of ionic liquids without any catalyst using cotton linter as the raw material and acetic anhydride as the esterification agent. FTIR, XRD and DSC were used to characterize the obtained products. It was shown that the homogeneously prepared cellulose acetates became completely amorphous. Degree of substitution of cellulose acetate synthesized in [C₄C₁Im][OAc] was found the highest; whereas T_g of this ester was the lowest. It was also found that the film made of cellulose acetate prepared in [C₄C₁Im][OAc] had lower toughness.     

Retention Behavior of Neutral and Positively and Negatively Charged Solutes on an Immobilized‐Artificial‐Membrane (IAM) Stationary Phase

The retention behavior of neutral, positively charged, and negatively charged solutes on the IAM.PC.DD2 stationary phase was investigated and compared. A set of monofunctional compounds and complex drugs (steroids, nonsteroidal anti‐inflammatory drugs, and β‐blockers) were selected for this study, i.e., neutral solutes and solutes with acidic or basic functionalities which are positively charged or negatively charged at pH 7.0. The correlation between the retention factor log k_w at pH 7.0 on the IAM.PC.DD2 stationary phase and the partition coefficient log P_oct or the distribution coefficient log D_7.0 showed that the retention mechanism depends on the charge state and structural characteristics of the compounds. The neutrals were least retained on the IAM.PC.DD2 stationary phase, and positively charged solutes were more retained than negatively charged ones. This implies that the retention of the charged solutes is controlled not only by lipophilicity but also by the electrostatic interaction with the phospholipid, with which positively charged solutes interact more strongly than negatively charged ones.     

Equilibrium Between Acetaldehyde, Acetyl Halide and Corresponding 1-Haloethyl Acetates in Gas Chromatograph Injector. Calculation of Enthalpies of Reaction

Gas chromatographic analysis of 1-chloroethyl acetate and 1-bromoethyl acetate revealed that the equilibrium between acetaldehyde, acetyl halide and the corresponding 1-haloethyl acetates exists in the injector of the chromatograph. Analyses were performed under strictly isothermal conditions of both injector and column at different temperatures. The results allowed calculation of the enthalpy of the reaction: CH₃CHO + CH₃COX → CH₃COOCHXCH₃ Enthalpies calculated for the reaction are as follows: ?17.3 [kcal mol^?1] (X=Cl) and ?18.5 [kcal mol^?1] (X=Br).     

Detecting organic vapors using a conductometric sensor prepared from Ardel®D-100 and graphite

The composites of graphite with Ardel^?D-100 which is a trademark of a polyester of bisphenol-A with terephthalic and isophthalic acid were used as a sensing material in a conductometric vapor sensor. The magnitudes of responses are increased in the order of benzene, isobutyl acetate, isoamyl acetate, ethyl benzene and chloro benzene. This suggests that Ardel^?D-100 can be used as a sensing material for chlorobenzene, ethyl benzene and isoamyl acetate. On the other hand, specific retention volumes of the sensed vapors on Ardel^?D-100 coated on graphite were determined by inverse gas chromatography at temperatures between 200 and 260 °C. The distribution coefficient, K _s of the vapors between stationary and mobile phases in the column was obtained. It was revealed for the first time that the logarithm of K _s of the solvents varies almost linearly with their responses based on conductometric resistance of the sensing polymer composite. Subsequently, the study suggests that gas chromatographic retention data can be used in prediction of the conductometric responses of a polymeric sensor to vapors. Correspondence: Ferdane Karaman, Department of Chemistry, Yildiz Technical University, 34220 Istanbul-Esenler, Turkey     

Preparations of regioselectively methylated cellulose acetates and their 1H and 13C NMR spectroscopic analyses

Seven possible regioselectively methylated cellulose acetates (RS‐MCAs)—2,3,6‐tri‐O‐methyl cellulose acetate, 3,6‐di‐O‐methyl cellulose acetate, 2,6‐di‐O‐methyl cellulose acetate, 2,3‐di‐O‐methyl cellulose acetate, 6‐O‐methyl cellulose acetate, 3‐O‐methyl cellulose acetate, and 2‐O‐methyl cellulose acetate—were prepared for the first time from chemically synthesized cellulose derivatives obtained by cationic ring‐opening polymerization and then were analyzed by ¹H and ¹³C NMR spectroscopy. The chemical shifts of ring protons and carbons were influenced by substituent groups (methyl or acetyl) and clearly reflected the pattern of substituent distribution in anhydroglucose units. These data may conveniently be used for the determination of the substituent distribution of methyl cellulose. The synthesized RS‐MCAs also may be used for the elucidation of the structure–property relationship. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4167–4179, 2002     

Acetylation of cellulose I and II studied by limiting viscosity and X-ray diffraction

When cellulose triacetates and some hydrolyzed acetates are boiled in 2.5N hydrochloric acid there is no residue. Under the same conditions cellulose is hydrolyzed, and a residue is obtained with a limiting viscosity that is related to the average length of the cellulose crystallites. These findings are combined to develop a method for studying the progress of acetylation through the amorphous portion of cellulose and into the crystallites, and to investigate the relative reactivities of cellulose I and cellulose II. Acetates were made from cotton and wood cellulose by a “fibrous” (heterogeneous) esterification involving sulfoacetic acid or perchloric acid catalyst in acetic acid-acetic anhydride; the final acetyl contents (10–41%) were attained by stopping the reaction at various points short of the triester (rather than by hydrolyzing a triester). When these acetates were boiled in 2.5N HCI they did not disappear completely, and the residues were cellulose I, indicating that cellulose acetate had been removed. With increasing acetyl the yield of residue decreased, and beyond about 33% acetyl the viscosity and x-ray measurements showed that the length and width of the crystallites decreased. However, when a nonsolvent such as toluene was added to the acetylation medium, the limiting viscosity did not change over the same acetyl range (up to 40%). Samples of varying acetyl values were taken during a regular acetylation of cotton linters in a mixer with sulfuric acid catalyst. X-ray studies of the residues obtained by boiling the acetates in 2.5N HCI revealed the presence of unreacted cellulose I even after 40% acetyl had been reached. This explains why the manufacture of cellulose esters from cellulose I requires complete esterification before they are hydrolyzed to the desired acetyl level. It was shown that there is a distinct difference between the acetylation reactivity of cellulose I and cellulose II. This indicates the importance of avoiding cellulose II formation during the refinement of cellulose for the manufacture of cellulose acetate in a process involving activation with acetic acid.     

Interpretation of interactions of halogenated hydrocarbons with modified silica adsorbent coated with 3-benzylketoimine group silane

The paper reports a new group of adsorbents obtained by modification of silica surface with silane containing 3-benzylketoimine groups with bonded Cu(II) and Ni(II) chlorides. The adsorbents obtained were subjected to a chromatographic study to establish the type of adsorbate-adsorbent interactions for aliphatic and aromatic halogenated hydrocarbons used as adsorbates. The following retention parameters were determined: retention factor (k), Kovats retention index (I), specific retention volume (V _g), and molecular retention index (ΔM _e). Values of the molecular retention index were subjected to complex statistical analysis providing qualitative relations between the adsorbates’ properties and spatial structure and their retention. It was observed that bonding of chlorides of Cu(II) and Ni(II) with the ketoimine groups resulted in an increase of the retention index and the molecular retention index indicating an increase of the adsorbate-adsorbent interaction in comparison with the reference column coated with silane including a 3-benzylketoimine group without transition metal chlorides. Along with the observed increase of the adsorbate-adsorbent interaction, larger difference between the retention indices was observed for both halogenated compounds. This indicates a positive influence of the introduced transition metals on the selectivity of the adsorbate-adsorbent interactions of the examined columns.     

New solid phase extractors for selective separation and preconcentration of mercury (II) based on silica gel immobilized aliphatic amines 2-thiophenecarboxaldehyde Schiff’s bases

2-Thiophenecarboxaldhyde is chemically bonded to silica gel surface immobilized monoamine, ethylenediamine and diethylenetriamine by a simple Schiff’s base reaction to produce three new SP-extractors, phases (I-III). The selectivity properties of these phases toward Hg(II) uptake as well as eight other metal ions: Ca(II), Fe(III), Co(II), Ni(II), Cu(II), Zn(II), Cd(II) and Pb(II) were extensively studied and evaluated as a function of pH of metal ion solution and equilibrium shaking time by the batch equilibrium technique. The data obtained clearly indicate that the new SP-extractors have the highest affinity for retention of Hg(II) ion. Their Hg(II) uptake in mmol g⁻¹ and distribution coefficient as log K_d values are always higher than the uptake of any other metal ion along the range of pH used (pH 1.0-10.0). The uptake of Hg(II) using phase I was 2.0 mmol g⁻¹ (log K_d 6.6) at pH 1.0 and 2.0. 1.8 mmol g⁻¹ (log K_d 4.25), 1.6 mmol g⁻¹ (log K_d 3.90) and 1.08 mmol g⁻¹ (log K_d 3.37) at pH 3.0, 5.0 and 8.0, respectively. Selective separation of Hg(II) from the other eight coexisting metal ions under investigation was achieved successfully using phase I at pH 2.0 either under static or dynamic conditions. Hg(II) was completely retained while Ca(II), Co(II) and Cd(II) ions were not retained. Ni(II), Cu(II), Zn(II), Pb(II) and Fe(III) showed very low percentage retention values to be 0.74, 0.97, 3.5 and 6.3%, respectively. Moreover, the high recovery values (95.5 ± 0.5, 95.8 ± 0.5 and 99.0% ± 1.0) of percolating two liters of doubly distilled water, drinking tap water and Nile river water spiked with 5 ng/l of Hg(II) over 100 mg of phase I packed in a minicolumn and used as a thin layer enrichment bed demonstrate the accuracy and validity of the new SP-extractors for preconcentration of the ultratrace amount of spiked Hg(II) prior to the determination by borohydride generation atomic absorption spectrometry (AAS) with no matrix interference. The detection limit (3σ) for Hg(II) based on enrichment factor 1000 was 4.75 pg/ml. The precision (R.S.D.) obtained for different amounts of mercury was in the range 0.52-1.01% (N = 3) at the 25-100 ng/l level.     

Reactions of Lower Titanium Chlorides with Molten Magnesium-containing Chlorides of Alkaline Metals

Conditional equilibrium constants K _n ^* of reactions between titanium chlorides and molten magnesium were calculated.     

Preparation and evaluation of n-octadecylphosphonic acid-modified magnesia-zirconia stationary phases for reversed-phase liquid chromatography

Three n-octadecylphosphonic acid-modified magnesia-zirconia reversed stationary phases (C₁₈PZM) are prepared via the strong Lewis base interactions between organophosphonate and magnesia-zirconia composite. And two of them are end-capped by using trimethylchlorosilane as end-capping agent in different procedures. Stability studies at extreme high pH conditions (pH 9-12) show that both the non-endcapped and endcapped columns are quite stable at pH 12 mobile phase. The reversed-phase liquid chromatographic behavior of three C₁₈PZM stationary phases are comparatively investigated in detail using a variety of basic compounds as probes. The retention of basic compounds on the three phases is studied over a wide range of pHs. And the possible retention mechanisms of basic compounds on the three stationary phases are discussed. The results show that the basic solutes retain by a hydrophobic and cation-exchange interaction mixed mechanism on three stationary phases when they are operated in eluents at pH values near to the pK_a of the Brönsted conjugate acid form of the analyte, suggesting that inherent zirconol groups on ZM are not expected to interact with bases via cation-exchange interaction at lower pH. Nonetheless, the non-endcapped phase differs markedly from the edncapped ones in retention and selectivity of basic solutes using eluents at pH 4.1, implying a complex retention mechanism at this pH. The cation-exchange sites under such conditions are more likely due to the adsorbed Lewis base anionic buffer constituents (acetate) on accessible ZM surface sites than the chemisorbed phosphonate. Although the three phases exhibit very similar chromatographic behavior with eluents at pH 10.1, and show in general satisfactory separation of basic compounds and alkaloids studied, the performance for a specific analyte, however, differs largely from column to column.     

Fast Determination of Lipophilicity by HPLC

A rapid method for the determination of lipophilicity by reversed-phase high-performance liquid chromatography is presented with a study of a set of 29 molecules representing various functional groups. The use of a short column packed with a polar-embedded phase and octanol-saturated water as eluent for direct measurement of log k _w is described. Extrapolation for log k _w measurements can be avoided for solutes having log P in the octanol/water system of less than 3.2. The gain in terms of productivity and simplicity of analysis over the direct measurement shows the usefulness of this method for industrial applications. Good correlations between log P values found in the literature and measured log k _w values were obtained.     

Relative Strength of Stronger Solvents for Silica,Amino- and Cyano-alkyl Bonded Silica Columns in Normal-Phase Liquid Chromatography

Abstract

The strength and selectivity of solvents such as ethyl acetate, dioxan and ethyl alcohol in n-hexane binaries were determined using steroids as solutes in normal-phase liquid chromatography of silica gel, amino- and cyano-propyl silica columns. Based on the linear relationship between the logarithm of the capacity ratio and logarithm of solvent composition, the relative strength of solvents was determined from the experimental retention data described in our earlier articles. A micro-computer data base was compiled for filing the retention behavior of the steroids. Using this computer data base, the optimization process of binary solvents for a given sample was improved. An example of the phase system design is described.     

Determination of the n‐octanol/water partition coefficients of weakly ionizable basic compounds by reversed‐phase high‐performance liquid chromatography with neutral model compounds

A strategy to utilize neutral model compounds for lipophilicity measurement of ionizable basic compounds by reversed‐phase high‐performance liquid chromatography is proposed in this paper. The applicability of the novel protocol was justified by theoretical derivation. Meanwhile, the linear relationships between logarithm of apparent n‐octanol/water partition coefficients (logK_ow′′) and logarithm of retention factors corresponding to the 100% aqueous fraction of mobile phase (logk_w) were established for a basic training set, a neutral training set and a mixed training set of these two. As proved in theory, the good linearity and external validation results indicated that the logK_ow′′–logk_w relationships obtained from a neutral model training set were always reliable regardless of mobile phase pH. Afterwards, the above relationships were adopted to determine the logK_ow of harmaline, a weakly dissociable alkaloid. As far as we know, this is the first report on experimental logK_ow data for harmaline (logK_ow = 2.28 ± 0.08). Introducing neutral compounds into a basic model training set or using neutral model compounds alone is recommended to measure the lipophilicity of weakly ionizable basic compounds especially those with high hydrophobicity for the advantages of more suitable model compound choices and convenient mobile phase pH control.     

Radiation effects on polymers—XIII. The application of cellulose acetate-g-polyacrylamide membranes in the process of water desalination by reverse osmosis

Using computerized programs, the water flux and salt rejection properties in reverse osmosis of cellulose acetate-g-acrylamide membranes are determined. Comparisons are made with ungrafted commercial cellulose acetate membranes, using 0.1 and 1.0 M sodium chloride, sodium sulphate and ammonium sulphate solutions. The grafted cellulose acetates show improved water flux but reduced NaCl rejection. However, they show promising prospects in bigger ion separation as for Na₂SO₄ and (NH₄)₂SO₄ solutions.     

Chiral discrimination of phenoxypropionic acid herbicides on teicoplanin phase: Effect of mobile phase modifier

Summary The chiral recgonition mechanism for a series of phenoxypropionic acid herbicides was investigated in reversed phase liquid chromatography (RPLC) on a teicoplanin stationary phase over a wide range of column temperatures. Thermodynamic constants, of the transfer of an enantiomer from the mobile to the teicoplanin stationary phases were determined. The van't Hoff plots for all solutes had a break at a critical temperature T^* showing a variation in the enantiomer retention mechanism due to a change in the conformational state of the teicoplanin, structure. Additionally, enthalpy-entropy compensation confirmed both the change in enantiomer interaction mechanism observed for regions T<T^* and T>T^* and the independence of this mechanism from (i) herbicide molecular structure,s i.e. the position of the chloro group on the phenol ring and (ii) the carbon absolute configuration. Moreover, the increasing enantioselectivity with increasing methanol fraction in the mobile phase was attributed to restriction of the solute association in the teicoplain, stationary phase, leading to favorable stereoselective interactions. This behavior was used to optimize chromatographic conditions for separation of herbicide enantiomers on teicoplanin.