Enhanced electrical properties of highly oriented poly(vinylidene fluoride) films prepared by solid‐state coextrusion

Oriented poly(vinylidene fluoride) (PVDF) films with β‐form crystals have been commonly prepared by cold drawing of a melt‐quenched film consisting of α‐form crystals. In this study, we have successfully produced highly oriented PVDF thin films (20 µm thick) with β‐crystals and a high crystallinity (55–76%), by solid‐state coextrusion of a gel film to eight times the original length at an established optimum extrusion temperature of 160°C, some 10°C below the melting temperature. The resultant drawn films had a highly oriented (orientation function f_c = 0.993) fibrous structure, showing high mechanical properties of an extensional elastic modulus of 8.3 GPa and tensile strength of 0.84 GPa, along the draw direction. Such highly oriented and crystalline films exhibited excellent ferroelectric and piezoelectric properties. The square hysteresis loop was significantly sharper than that of a conventional sample. The sharp switching transient yielded the remnant polarization P_r of 90 mC/m², and the electromechanical coupling factor k_t was 0.24 at room temperature. These values are about 1.5 times greater than those of a conventional β‐PVDF film. Thus, solid‐state coextrusion near the melting point was found to be a useful technique for the preparation of highly oriented and highly crystalline β‐PVDF films with superior mechanical and electrical properties. The morphology of the extrudate relevant to such properties is discussed. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2549–2556, 1999     

Rosette‐Shaped Calcite Structures at Surfaces: Mechanistic Implications for CaCO3 Crystallization

Biomineralization is believed to be achieved by the intimate cooperation of soluble macromolecules and an insoluble matrix at the specific inorganic–organic interface. It has been reported that positively charged matrices play an important role in controlling the structure of CaCO₃ at surfaces, although detailed mechanisms remain unclear. In this work, we studied the transformation from amorphous CaCO₃ to calcite crystals on surfaces by using thin films of poly(2‐(dimethylamino)ethyl methacrylate) (PDMAEMA) and its quaternized form. The positively charged PDMAEMA film was found to possess unique properties for CaCO₃ crystallization: individually separated, single calcite crystals were formed on the PDMAEMA film in the absence of poly(acrylic acid) (PAA), while circularly fused calcite crystals were formed in the presence of PAA. The circularly fused (rosette‐shaped) calcite crystals could be changed from a completely packed rosette to a ring‐shaped, hollow structure by tuning the crystallization conditions. A number of factors, such as reaction time, amount of (NH₄)₂CO₃, concentration of PAA, and charge of matrix‐films, were varied systematically, and we now propose a mechanism based on these observations.     

The fabrication of layer‐by‐layer mode LaCoO3 film by pulsed laser deposition

The relationship between strain and growth conditions in LaCoO₃ thin film was obtained to control the magnetic‐electric characteristics. The LaCoO₃ thin films on the SrTiO₃ substrates have been achieved by the pulsed laser deposition method, and the reflection high‐energy electron diffraction method (RHEED) was applied to monitor the growth process in situ; the layer‐by‐layer growth mode was discovered. The X‐ray diffraction and atomic force microscopy were applied to the phase analysis, and the layer thickness and the layer‐by‐layer growth mode were uncovered. Compared with the 100‐nm LaCoO₃ thin films, the strain in the layer‐by‐layer ultra thin film was more controllable. The enhanced magnetic properties of the layer‐by‐layer mode ultra‐thin films could be tested in future work.     

MOF‐on‐MOF: Oriented Growth of Multiple Layered Thin Films of Metal–Organic Frameworks

The precise alignment of multiple layers of metal–organic framework (MOF) thin films, or MOF‐on‐MOF films, over macroscopic length scales is presented. The MOF‐on‐MOF films are fabricated by epitaxially matching the interface. The first MOF layer (Cu₂(BPDC)₂, BPDC=biphenyl‐4,4′‐dicarboxylate) is grown on an oriented Cu(OH)₂ film by a “one‐pot” approach. Aligned second (Cu₂(BDC)₂, BDC=benzene 1,4‐dicarboxylate, or Cu₂(BPYDC)₂, BPYDC=2,2′‐bipyridine‐5,5′‐dicarboxylate) MOF layers can be deposited using liquid‐phase epitaxy. The co‐orientation of the MOF films is confirmed by X‐ray diffraction. Importantly, our strategy allows for the synthesis of aligned MOF films, for example, Cu₂(BPYDC)₂, that cannot be grown on a Cu(OH)₂ surface. We show that aligned MOF films furnished with Ag nanoparticles show a unique anisotropic plasmon resonance. Our MOF‐on‐MOF approach expands the chemistry of heteroepitaxially oriented MOF films and provides a new toolbox for multifunctional porous coatings.     

Chiral Side Groups Trigger Second Harmonic Generation Activity in 3D Octupolar Bipyrimidine‐Based Organic Liquid Crystals

The design of efficient noncentrosymmetric materials remains the ultimate goal in the field of organic second‐order nonlinear optics. Unlike inorganic crystals currently used in second‐order nonlinear optical applications, organic materials are an attractive alternative owing to their fast electro‐optical response and processability, but their alignment into noncentrosymmetric film remains challenging. Here, symmetry breaking by judicious functionalization of 3D organic octupoles allows the emergence of multifunctional liquid crystalline chromophores which can easily be processed into large, flexible, thin, and self‐oriented films with second harmonic generation responses competitive to the prototypical inorganic KH₂PO₄ crystals. The liquid‐crystalline nature of these chiral organic films also permits the modulation of the nonlinear optical properties owing to the sensitivity of the supramolecular organization to temperature, leading to the development of tunable macroscopic materials.     

Template‐Free Synthesis of Highly b‐Oriented MFI‐Type Zeolite Thin Films by Seeded Secondary Growth

Highly b‐oriented, closely packed, MFI zeolite films are prepared on seeded stainless‐steel plates using organic template‐free, secondary growth solutions, containing aluminum sulfate as a crystallization agent. The number of a‐oriented twin crystals is significantly reduced, and even eliminated, simply by restricting the pH value of the secondary growth solution to the narrow range of 11.1–11.3. Values of pH can be adjusted through the controlled addition of (NH₄)₂SO₄ or H₂SO₄ to secondary growth solutions of the composition (1 SiO₂:0.57 NaOH:137.5 H₂O:0.0050 (Al₂(SO₄)₃?18 H₂O)) or by simply decreasing the molar composition of NaOH with no extra additives.     

Synthesis and Optoelectronic Properties of Hexahydroxylated 10‐O‐R‐Substituted Anthracenes via a New Modification of the Friedel–Crafts Reaction Using O‐Protected ortho‐Acetal Diarylmethanols

A new modification of the Friedel–Crafts type intramolecular cyclization involving O‐protected ortho‐acetal diarylmethanols as a new type of reactant, was carried out for the first time in a medium containing a large amount of water at room temperature and enabled synthesis of a series of electron‐rich, hexahydroxylated 10‐O‐R‐substituted anthracenes, where R is an alkyl (Me, nBu, n‐C₁₆H₃₃) or arylalkyl group (CH₂Ph, CH₂‐2‐Napht, CH₂C₆H₄CH₂OAr) and also evaluation of their electronic and optoelectronic properties in solution, crystal, and solid thin film. In this transformation, a central 10‐O‐R‐substituted benzene ring was formed, fused to rings originating from two independent aromatic aldehydes. The reaction proceeded via two identified mechanisms involving acetal and/or free aldehyde groups. The acid sensitive acetal and dibenzyl alkoxy functions have never been used together in the intramolecular Friedel–Crafts type cyclization. The new compounds revealed deep blue fluorescence and quantum yields in solution around 0.3. The electrical properties investigated for thin films obtained by vacuum deposition on glass were 10‐O‐R‐substituent dependent and showed much faster transient current decay in the case of the 10‐O‐CH₂Ph derivative than for the material with a 10‐O‐Me substituent (the lifetime of charge carriers was 25 times shorter in this case). The AFM images of thin films, Stokes shifts, and X‐ray analysis of π‐stacking interactions in crystals of the new materials have been also obtained.     

Axis‐Oriented,Continuous Anatase Titania Films with Exposed Reactive {100} Facets

Homogeneous TiO₂ single crystals with high exposure of {100} reactive facets were constructed as a seed monolayer on transparent conductive substrates with the desired orientation of reactive facets. A secondary growth process was subsequently carried out on the monolayer seed film to form an axis‐oriented continuous reactive film. Performing secondary growth with different precursors led to optimized conditions for high‐performance photoelectrochemical activity of anatase TiO₂ films. Experimental techniques such as UV/Vis absorption spectroscopy, X‐ray diffraction, high‐resolution SEM, and photoelectrochemistry were used to characterize the structural, optical, and photoelectrochemical properties of the as‐synthesized films. As a photoanode in a photoelectrochemical cell, the axis‐oriented reactive film shows a maximum photocurrent density of 0.3 mA cm^?2, as opposed to 0.075 mA cm^?2 for non‐axis‐oriented (randomly oriented) TiO₂ film.     

A Compact Tetrathiafulvalene–Benzothiadiazole Dyad and Its Highly Symmetrical Charge‐Transfer Salt: Ordered Donor π‐Stacks Closely Bound to Their Acceptors

A compact and planar donor–acceptor molecule 1 comprising tetrathiafulvalene (TTF) and benzothiadiazole (BTD) units has been synthesised and experimentally characterised by structural, optical, and electrochemical methods. Solution‐processed and thermally evaporated thin films of 1 have also been explored as active materials in organic field‐effect transistors (OFETs). For these devices, hole field‐effect mobilities of μ_FE=(1.3±0.5)×10^?3 and (2.7±0.4)×10^?3 cm² V s^?1 were determined for the solution‐processed and thermally evaporated thin films, respectively. An intense intramolecular charge‐transfer (ICT) transition at around 495 nm dominates the optical absorption spectrum of the neutral dyad, which also shows a weak emission from its ICT state. The iodine‐induced oxidation of 1 leads to a partially oxidised crystalline charge‐transfer (CT) salt {( 1 )₂I₃}, and eventually also to a fully oxidised compound { 1 I₃} ? 1/2I₂. Single crystals of the former CT compound, exhibiting a highly symmetrical crystal structure, reveal a fairly good room temperature electrical conductivity of the order of 2 S cm^?1. The one‐dimensional spin system bears compactly bonded BTD acceptors (spatial localisation of the LUMO) along its ridge.     

Flexible Viologen‐Based Porous Framework Showing X‐ray Induced Photochromism with Single‐Crystal‐to‐Single‐Crystal Transformation

A viologen‐based Borromean entangled porous framework was found to be sensitive to both Cu_Kα and Mo_Kα X‐ray sources, showing rapid photochromic response and recovery within one minute. The X‐ray‐induced photochromic process is accompanied by a reversible single‐crystal‐to‐single‐crystal (SC‐SC) structural transformation, an unprecedented phenomenon for X‐ray sensitive materials. The complex can be further processed into portable thin films for detecting the dose of the X‐ray exposure. Moreover, the photochromism can occur over a broad temperature range of 100–333 K, both in the form of single crystals and thin films, making it a potential candidate for practical indoor and outdoor applications.     

Correlation of Molecular Assembly and Interactions in Crystals and Langmuir–Blodgett Films of N‐(2,4‐dinitrophenyl)‐n‐octadecylamine

Correlation of molecular organization in crystals and in ultrathin films is of fundamental interest in the design of molecular materials based on thin films. We have chosen as a test case, N‐(2,4‐dinitrophenyl)‐n‐octadecylamine (DNPOA), a potential candidate for the fabrication of Langmuir–Blodgett (LB) films for quadratic nonlinear optical applications. Like several other 4‐nitroaniline derivatives, DNPOA does not form stable monolayers at the air–water interface. This has precluded investigations of their organization in LB films. We have stabilized composite Langmuir films of DNPOA with the phospholipid molecule DSPC and fabricated their LB films. Successful growth of single crystals of DNPOA allowed structure determination and detailed analysis of molecular associations in the solid state. Electronic absorption spectra of DNPOA in solution, in the solid state and in the LB film are investigated. Modeling of the various spectral signatures by semiempirical computations on molecular clusters extracted from the crystal lattice provides insight into the correlation between the molecular organization in crystals and in LB films.     

Electrical,optical, and structural characterization of p‐type N‐doped SnO thin films prepared by thermal oxidation of sputtered SnNx thin films

We present a study of electrical and optical properties of nitrogen‐doped tin oxide thin films deposited on glass by the DC Magnetron Sputtering method. The deposition conditions to obtain p‐type thin films were a relative partial pressure between 7% and 11% (N₂ and/or O₂), a total working pressure of 1.8 mTorr and a plasma power of 30 W. The deposited thin films were oxidized after annealing at 250°C for 30 minutes. X‐ray diffraction results showed that the as‐deposited thin films exhibit a Sn tetragonal structure, and after annealing, they showed SnO tetragonal structure. X‐ray photoelectron spectroscopy results showed the presence of nitrogen in the samples before and after annealing. The measured physical parameters of the thin films were optical band gap between 1.92 and 2.68 eV, resistivity between 0.52 and 5.46 Ωcm, a concentration of p‐type carriers between 10¹⁸ and 10¹⁹ cm^?3, and a Hall mobility between 0.1 and 1.94 cm²V^?1s^?1. These thin films were used to fabricate p‐type thin film transistors.     

A Fast Deposition‐Crystallization Procedure for Highly Efficient Lead Iodide Perovskite Thin‐Film Solar Cells

Thin‐film photovoltaics based on alkylammonium lead iodide perovskite light absorbers have recently emerged as a promising low‐cost solar energy harvesting technology. To date, the perovskite layer in these efficient solar cells has generally been fabricated by either vapor deposition or a two‐step sequential deposition process. We report that flat, uniform thin films of this material can be deposited by a one‐step, solvent‐induced, fast crystallization method involving spin‐coating of a DMF solution of CH₃NH₃PbI₃ followed immediately by exposure to chlorobenzene to induce crystallization. Analysis of the devices and films revealed that the perovskite films consist of large crystalline grains with sizes up to microns. Planar heterojunction solar cells constructed with these solution‐processed thin films yielded an average power conversion efficiency of 13.9±0.7 % and a steady state efficiency of 13 % under standard AM 1.5 conditions.     

Preparation of polyimide/BaTiO3‐nanocrystal hybrid thin films and their dielectric property

High dielectric constant is highly desirable in capacitors and memory devices. In this work, oleic acid (OA)‐capped BaTiO₃ nanocrystals were synthesized by a two‐phase approach. Polyimide (PI)/BaTiO₃‐nanocrystal composite thin films with high dielectric constant have been successfully fabricated. The morphologies and dielectric properties of the hybrid films were exploited. The results showed that BaTiO₃ nanocrystals can be uniformly dispersed in the PI thin films owing to the surface modification of OA‐capped BaTiO₃ nanocrystals. It was found that the dielectric constant of composite film varies with the volume fraction of BaTiO₃ nanocrystals and sintering temperatures and reaches a maximum value of 44.1, which is around 13 times higher than that of pristine PI thin film (3.2). These results demonstrated that PI/BaTiO₃‐nanocrystal composite films have considerable application potential in microelectronic fields.     

Self‐Organization of Honeycomb‐like Porous TiO2 Films by means of the Breath‐Figure Method for Surface Modification of Titanium Implants

This study describes a facile breath‐figure method for the preparation of honeycomb‐like porous TiO₂ films with an organometallic small‐molecule precursor. Multiple characterization techniques have been used to investigate the porous films and a mechanism for the formation process of porous TiO₂ films through the breath‐figure method is proposed. The pore size of the TiO₂ films could be modulated by varying the experimental parameters, such as the concentration of titanium n‐butoxide (TBT) solution, the content of cosolvent, and the air flow rate. In vitro cell‐culture experiments indicate that NIH 3T3 fibroblast cells seeded on the honeycomb‐like porous TiO₂ films show good adhesion, spreading, and proliferation behaviors, which suggests that honeycomb‐like porous TiO₂ films are an attractive biomaterial for surface modification of titanium and its alloys implants in tissue engineering to enhance their biocompatibility and bioactivity.     

Simultaneous formation of platinum‐based nanocatalysts and degradation of dyes at oil/water interface: Comparative morphological and kinetic studies

To decrease the water pollution of textile industries with a large amount of toxic and non‐biodegradable colored dye effluents, an efficient technique is required to safely remove harmful pollutants. In this paper, the reaction between azo dyes and NaBH₄ catalyzed by nanoparticles (NPs) thin films has been studied. We report insitu degradation of methyl orange (MO) and methyl red (MR) by using Pt‐based thin films monitored by UV–Vis spectroscopy. We have synthesized different thin films such as Pt, PtPd, PtFeFe₂O₃, PtNi and PtAu films from Pt organometallic precursor in the MO and MR medium (dye degradation and NPs formation is happened simultaneously) and activity of these films were compared in the complete degradation of MO and MR dyes. Rate constants for the catalyzed reactions have been determined. PtPd NPs thin film has shown the highest rate constant for the degradation of MO and MR within only a few seconds due to its well‐ordered structure. Furthermore, the effect of presence of MO on the morphology of NPs was investigated.     

Crack‐Free Periodic Porous Thin Films Assisted by Plasma Irradiation at Low Temperature and Their Enhanced Gas‐Sensing Performance

Homogenous thin films are preferable for high‐performance gas sensors because of their remarkable reproducibility and long‐term stability. In this work, a low‐temperature fabrication route is presented to prepare crack‐free and homogenous metal oxide periodic porous thin films by oxygen plasma irradiation instead of high temperature annealing by using a sacrificial colloidal template. Rutile SnO₂ is taken as an example to demonstrate the validity of this route. The crack‐free and homogenous porous thin films are successfully synthesized on the substrates in situ with electrodes. The SnO₂ porous thin film obtained by plasma irradiation is rich in surface OH groups and hence superhydrophilic. It exhibits a more homogenous structure and lower resistance than porous films generated by annealing. More importantly, such thin films display higher sensitivity, a lower detection threshold (100 ppb to acetone) and better durability than those that have been directly annealed, resulting in enhanced gas‐sensing performance. The presented method could be applied to synthesize other metal oxide homogenous thin films and to fabricate gas‐sensing devices with high performances.     

Polymorphism of 3‐(5‐phenyl‐1,3,4‐oxadiazol‐2‐yl)‐ and 3‐[5‐(pyridin‐4‐yl)‐1,3,4‐oxadiazol‐2‐yl]‐2H‐chromen‐2‐ones

This study of 3‐(5‐phenyl‐1,3,4‐oxadiazol‐2‐yl)‐2H‐chromen‐2‐one, C₁₇H₁₀N₂O₃, 1 , and 3‐[5‐(pyridin‐4‐yl)‐1,3,4‐oxadiazol‐2‐yl]‐2H‐chromen‐2‐one, C₁₆H₉N₃O₃, 2 , was performed on the assumption of the potential anticancer activity of the compounds. Three polymorphic structures for 1 and two polymorphic structures for 2 have been studied thoroughly. The strongest intermolecular interaction is stacking of the `head‐to‐head' type in all the studied crystals. The polymorphic structures of 1 differ with respect to the intermolecular interactions between stacked columns. Two of the polymorphs have a columnar or double columnar type of crystal organization, while the third polymorphic structure can be classified as columnar‐layered. The difference between the two structures of 2 is less pronounced. Both crystals can be considered as having very similar arrangements of neighbouring columns. The formation of polymorphic modifications is caused by a subtle balance of very weak intermolecular interactions and packing differences can be identified only using an analysis based on a study of the pairwise interaction energies.     

Preparation and characterization of flame‐retardant lamellar Mg(OH)2 thin films on citric acid‐treated cotton fabrics

Preparation and characterization of lamellar magnesium hydroxide (Mg(OH)₂) thin films on cotton fabrics are reported in this paper. Mercerized cotton fabrics were treated with citric acid, so carboxyl groups were introduced to the surface of the fabrics. Mg(OH)₂ seeds were first adsorbed on the citric acid‐treated cotton fabrics and then Mg(OH)₂ thin films grew on the fabric through secondary growth method. Kinetics and isotherm studies found that the adsorption of Mg(OH)₂ seeds on citric acid‐treated cotton fabrics followed pseudo second‐order kinetic model and Langmuir isotherm. This indicated that Mg(OH)₂ seeds adsorption was monolayer chemical adsorption driven by electric attraction between positively charged Mg(OH)₂ seeds and ? COO^? ions on the cotton fiber surface. The X‐ray diffraction (XRD) and SEM characterizations of the Mg(OH)₂ thin films covered cotton fabrics found that standing flaky Mg(OH)₂ crystals formed a shell of porous but continuous network on cotton fabric surface. Owing to the Mg(OH)₂ thin film covering, the fabric had fireproof property, lower thermal conductivity and higher optical absorbance in the UV, Vis and IR regions. Copyright © 2010 John Wiley & Sons, Ltd.     

Methylammonium‐Mediated Evolution of Mixed‐Organic‐Cation Perovskite Thin Films: A Dynamic Composition‐Tuning Process

Methylammonium‐mediated phase‐evolution behavior of FA_1−xMA_xPbI₃ mixed‐organic‐cation perovskite (MOCP) is studied. It is found that by simply enriching the MOCP precursor solutions with excess methylammonium cations, the MOCPs form via a dynamic composition‐tuning process that is key to obtaining MOCP thin films with superior properties. This simple chemical approach addresses several key challenges, such as control over phase purity, uniformity, grain size, composition, etc., associated with the solution‐growth of MOCP thin films with targeted compositions.