Energetic Properties of Rocket Propellants Evaluated through the Computational Determination of Heats of Formation of Nitrogen‐Rich Compounds

The use of ab initio and DFT methods to calculate the enthalpies of formation of solid ionic compounds is described. The results obtained from the calculations are then compared with those from experimental measurements on nitrogen‐rich salts of the 2,2‐dimethyltriazanium cation (DMTZ) synthesized in our laboratory and on other nitrogen‐rich ionic compounds. The importance of calculating accurate volumes and lattice enthalpies for the determination of heats of formation is also discussed. Furthermore, the crystal structure and hydrogen‐bonding networks of the nitroformate salt of the DMTZ cation is described in detail. Lastly, the theoretical heats of formation were used to calculate the specific impulses (I_sp) of the salts of the DMTZ cation in view of a prospective application in propellant formulations.     

2‐Azido‐2‐deoxycellulose: Synthesis and 1,3‐Dipolar Cycloaddition

Chitosan ( 1 ) was prepared by basic hydrolysis of chitin of an average molecular weight of 70000 Da, ¹H‐NMR spectra indicating almost complete deacetylation. N‐Phthaloylation of 1 yielded the known N‐phthaloylchitosan ( 2 ), which was tritylated to provide 3a and methoxytritylated to 3b . Dephthaloylation of 3a with NH₂NH₂?H₂O gave the 6‐O‐tritylated chitosan 4a . Similarly, 3b gave the 6‐O‐methoxytritylated 4b . CuSO₄‐Catalyzed diazo transfer to 4a yielded 95% of the azide 5a , and uncatalyzed diazo transfer to 4b gave 82% of azide 5b . Further treatment of 5a with CuSO₄ produced 2‐azido‐2‐deoxycellulose ( 7 ). Demethoxytritylation of 5b in HCOOH gave 2‐azido‐2‐deoxy‐3,6‐di‐O‐formylcellulose ( 6 ), which was deformylated to 7 . The 1,3‐dipolar cycloaddition of 7 to a range of phenyl‐, (phenyl)alkyl‐, and alkyl‐monosubstituted alkynes in DMSO in the presence of CuI gave the 1,2,3‐triazoles 8 – 15 in high yields.     

Stereoselective Synthesis of (Z)‐4‐(2‐Bromovinyl)benzene‐sulfonyl Azide and Its Synthetic Utility for the Transformation to (Z)‐N‐[4‐(2‐Bromovinyl)benzenesulfonyl]imidates

A novel method for the stereoselective synthesis of (Z)‐4‐(2‐bromovinyl)benzenesulfonyl azide by simultaneous azidation and debrominative decarboxylation of anti‐2,3‐dibromo‐3‐(4‐chlorosulfonylphenyl)propanoic acid using NaN₃ only was developed. Facile transformation of (Z)‐4‐(2‐bromovinyl)benzenesulfonyl azide to (Z)‐N‐[4‐ (2‐bromovinyl)benzenesulfonyl]imidates was also achieved by Cu‐catalyzed three‐component coulping of (Z)‐4‐(2‐bromovinyl)benzenesulfonyl azide, terminal alkynes and alcohols/phenols.     

Energetic Hydrazine‐Based Salts with Nitrogen‐Rich and Oxidizing Anions

1,1,1‐Trimethylhydrazinium iodide ([(CH₃)₃N? NH₂]I, 1 ) was reacted with a silver salt to form the corresponding nitrate ([(CH₃)₃N? NH₂][NO₃], 2 ), perchlorate ([(CH₃)₃N? NH₂][ClO₄], 3 ), azide ([(CH₃)₃N? NH₂][N₃], 4 ), 5‐amino‐1H‐tetrazolate ([(CH₃)₃N? NH₂][H₂N? CN₄], 5 ), and sulfate ([(CH₃)₃N? NH₂]₂[SO₄]?2H₂O, 6 ?2H₂O) salts. The metathesis reaction of compound 6 ?2H₂O with barium salts led to the formation of the corresponding picrate ([(CH₃)₃N? NH₂][(NO₂)₃Ph ‐ O], 7 ), dinitramide ([(CH₃)₃N? NH₂][N(NO₂)₂], 8 ), 5‐nitrotetrazolate ([(CH₃)₃N? NH₂][O₂N? CN₄], 9 ), and nitroformiate ([(CH₃)₃N? NH₂][C(NO₂)₃], 10 ) salts. Compounds 1 – 10 were characterized by elemental analysis, mass spectrometry, infrared/Raman spectroscopy, and multinuclear NMR spectroscopy (¹H, ¹³C, and ¹⁵N). Additionally, compounds 1 , 6 , and 7 were also characterized by low‐temperature X‐ray diffraction techniques (XRD). Ba(NH₄)(NT)₃ (NT=5‐nitrotetrazole anion) was accidentally obtained during the synthesis of the 5‐nitrotetrazole salt 9 and was also characterized by low‐temperature XRD. Furthermore, the structure of the [(CH₃)₃N? NH₂]⁺ cation was optimized using the B3LYP method and used to calculate its vibrational frequencies, NBO charges, and electronic energy. Differential scanning calorimetry (DSC) was used to assess the thermal stabilities of salts 2 – 5 and 7 – 10 , and the sensitivities of the materials towards classical stimuli were estimated by submitting the compounds to standard (BAM) tests. Lastly, we computed the performance parameters (detonation pressures/velocities and specific impulses) and the decomposition gases of compounds 2 – 5 and 7 – 10 and those of their oxygen‐balanced mixtures with an oxidizer.     

Pd‐SBT@MCM‐41: As an efficient,stable and recyclable organometallic catalyst for C‐C coupling reactions and synthesis of 5‐substituted tetrazoles

A palladium S‐benzylisothiourea complex was anchored on functionalized MCM‐41 (Pd‐SBT@MCM‐41) and applied as efficient and reusable catalyst for the synthesis of 5‐substituted 1H –tetrazoles using [2 + 3] cycloaddition reaction of various organic nitriles with sodium azide (NaN₃) in poly(ethylene glycol) (PEG) as green solvent. Also this catalyst was applied as an versatile organometallic catalyst for Suzuki cross‐coupling reaction of aryl halides and phenylboronic acid (PhB(OH)₂) or sodium tetraphenyl borate (NaB(Ph)₄). This nanocatalyst was characterized by thermal gravimetric analysis (TGA), X‐ray Diffraction (XRD), scanning electron microscopy (SEM), inductively Coupled Plasma (ICP) and N₂ adsorption–desorption isotherms techniques. Recovery of the catalyst is easily achieved by centrifugation for several consecutive runs.     

Synthesis of 5‐Aminotetrazole‐1 N‐oxide and Its Azo Derivative: A Key Step in the Development of New Energetic Materials

1‐Hydroxy‐5‐aminotetrazole ( 1 ), which is a long‐desired starting material for the synthesis of hundreds of new energetic materials, was synthesized for the first time by the reaction of aqueous hydroxylamine with cyanogen azide. The use of this unique precursor was demonstrated by the preparation of several energetic compounds with equal or higher performance than that of commonly used explosives, such as hexogen (RDX). The prepared compounds, including energetic salts of 1‐hydroxy‐5‐aminotetrazole (hydroxylammonium ( 2 , two polymorphs) and ammonium ( 3 )), azo‐coupled derivatives (potassium ( 5 ), hydroxylammonium ( 6 ), ammonium ( 7 ), and hydrazinium 5,5′‐azo‐bis(1‐N‐oxidotetrazolate ( 8 , two polymorphs)), as well as neutral compounds 5,5′‐azo‐bis(1‐oxidotetrazole) ( 4 ) and 5,5′‐bis(1‐oxidotetrazole)hydrazine ( 9 ), were intensively characterized by low‐temperature X‐ray diffraction, IR, Raman, and multinuclear NMR spectroscopy, elemental analysis, and DSC. The calculated energetic performance, by using the EXPLO5 code, based on the calculated (CBS‐4M) heats of formation and X‐ray densities confirm the high energetic performance of tetrazole‐N‐oxides as energetic materials. Last but not least, their sensitivity towards impact, friction, and electrostatic discharge were explored. 5,5′‐Azo‐bis(1‐N‐oxidotetrazole) deflagrates close to the DDT (deflagration‐to‐detonation transition) faster than all compounds that have been investigated in our research group to date.     

Synthesis of α‐Aminonitriles and 5‐Substituted 1H‐Tetrazoles Using an Efficient Nanocatalyst of Fe3O4@SiO2–APTES‐supported Trifluoroacetic Acid

Fe₃O₄@SiO₂–APTES‐supported trifluoroacetic acid nanocatalyst was used for the one‐pot synthesis of α‐aminonitriles via a three‐component reaction of aldehydes (or ketones), amines, and sodium cyanide. This method produced a high yield of 75–96% using only a small amount of the catalyst (0.05 g) in EtOH at room temperature. The catalyst was also employed for the synthesis of 5‐substituted 1H‐tetrazoles from nitriles and sodium azide in EtOH at 80°C. The tetrazoles were produced with good‐to‐excellent yields in a short reaction time of 4 h. Both synthetic methods were carried out in the absence of an organic volatile solvent. Because the supported trifluoroacetic acid generated a solid acid on the surface, thus the acid corrosiveness was not a serious challenge. This heterogeneous nanocatalyst was magnetically recovered and reused several times without significant loss of catalytic activity.     

Isocyanide‐Based Three‐Component Synthesis of Highly Substituted 1,6‐Dihydro‐6,6‐dimethylpyrazine‐2,3‐dicarbonitrile, 3,4‐Dihydrobenzo[g]quinoxalin‐2‐amine,and 3,4‐Dihydro‐3,3‐dimethyl‐quinoxalin‐2‐amine Derivatives

A novel and efficient isocyanide‐based multicomponent reaction between alkyl or aryl isocyanides 1 , 2,3‐diaminomaleonitrile ( 2 ), naphthalene‐2,3‐diamines ( 6 ) or benzene‐1,2‐diamine ( 9 ), and 3‐oxopentanedioic acid ( 3 ) or Meldrum's acid ( 4 ) or ketones 7 was developed for the ecologic synthesis, at room temperature under mild conditions, of 1,6‐dihydropyrazine‐2,3‐dicarbonitriles 5a – 5f in H₂O without using any catalyst, and of 3,4‐dihydrobenzo[g]quinoxalin‐2‐amine and 3,4‐dihydro‐3,3‐dimethyl‐quinoxalin‐2‐amine derivatives 8a – 8g and 10a – 10e , respectively, in the presence of a catalytic amount of p‐toluenesulfonic acid (TsOH) in EtOH, in good to excellent yields (Scheme 1).     

Dendrimer‐encapsulated Cu(Π) nanoparticles immobilized on superparamagnetic Fe3O4@SiO2 nanoparticles as a novel recyclable catalyst for N‐arylation of nitrogen heterocycles and green synthesis of 5‐substituted 1H‐tetrazoles

In this study, dendrimer‐encapsulated Cu(Π) nanoparticles immobilized on superparamagnetic Fe₃O₄@SiO₂ nanoparticles were prepared via a multistep‐synthesis. Then, the synthesized composite was fully characterized by various techniques such as fourier transform infrared (FT‐IR) spectroscopy, X‐ray diffraction (XRD), dynamic light scattering (DLS), UV‐vis spectroscopy, energy dispersive X‐ray analysis (EDX), thermogravimetric analysis (TGA) and vibration sample magnetometer (VSM). From the information gained by FE‐SEM and TEM studies it can be inferred that the particles are mostly spherical in shape and have an average size of 50 nm. Also, the amount of Cu is determined to be 0.51 mmol/g in the catalyst by inductively coupled plasma (ICP) analyzer. This magnetic nano‐compound has been successfully applied as a highly efficient, magnetically recoverable and stable catalyst for N‐arylation of nitrogen heterocycles with aryl halides (I, Br) and arylboronic acids without using external ligands or additives. The catalyst was also employed in a one‐pot, three‐component reaction for the efficient and green synthesis of 5‐substituted 1H‐tetrazoles using various aldehydes, hydroxylamine hydrochloride and sodium azide in water. The magnetic catalyst can be easily separated by an external magnet bar and is recycled seven times without significant loss of its activity.     

Synthesis,Characterization, and Crystal Structure of 1,3‐Dipentafluorophenyl‐2,2,2,4,4,4‐hexazido‐1,3‐diaza‐2,4‐diphosphetidine

1,3‐Dipentafluorophenyl‐2,2,2,4,4,4‐hexazido‐1,3‐diaza‐2,4‐diphosphetidine ( 1 ) was synthesized by the reaction of [(C₆F₅)NPCl₃]₂ with trimethylsilyl azide in CH₂Cl₂ and characterized by multinuclear NMR and vibrational spectroscopy. The molecular structure of the compound was determined by single‐crystal X‐ray structure analysis. [(C₆F₅)NP(N₃)₃]₂ crystallizes in the monoclinic space group P2₁/n with a = 9.6414(2), b = 7.4170(1) and c = 15.9447(4) Å, β = 94.4374(9)°, with 2 formula units per unit cell. The bond situation in [(C₆F₅)NP(N₃)₃]₂ has been studied on the basis of NBO analysis. The antisymmetric stretching vibration of the azide groups is discussed. The structural diversity of 1 and 1,3‐diphenyl‐2,2,2,4,4,4‐hexazido‐1,3‐diaza‐2,4‐diphosphetidine in solution and in the solid state depending on the aryl substituent at the nitrogen atom is discussed.     

An Efficient Synthesis of 3‐(1H‐Tetrazol‐5‐yl)coumarins (=3‐(1H‐Tetrazol‐5‐yl)‐2H‐1‐benzopyran‐2‐ones) via Domino Knoevenagel Condensation,Pinner Reaction,and 1,3‐Dipolar Cycloaddition in Water

A novel straightforward synthesis of 3‐(1H‐tetrazol‐5‐yl)coumarins (=3‐(1H‐tetrazol‐5‐yl)‐2H‐1‐benzopyran‐2‐ones) 6 via domino Knoevenagel condensation, Pinner reaction, and 1,3‐dipolar cycloaddition of substituted salicylaldehydes (=2‐hydroxybenzaldehydes), malononitrile (propanedinitrile), and sodium azide in H₂O is reported (Scheme 1 and Table 2). This general protocol provides a wide variety of 3‐(1H‐tetrazol‐5‐yl)coumarins in good yields under mild reaction conditions.     

An Efficient One‐Pot,Four‐Component Synthesis of {[(1H‐1,2,3‐Triazol‐4‐yl)methoxy]phenyl}‐1H‐pyrazolo[1,2‐b]phthalazine‐5,10‐dione Derivatives

The 1‐{[(1H‐1,2,3‐Triazol‐4‐yl)methoxy]phenyl}‐1H‐pyrazolo[1,2‐b]phthalazine‐5,10‐dione derivatives 5 were synthesized by a simple and efficient method, i.e., by the four‐component, one‐pot condensation reaction of phthalohydrazide 4 , a (propargyloxy)benzaldehyde 1 , an active methylene compound 3 (malononitrile or ethyl cyanoacetate), and an azide 2 in the presence of Cu(OAc)₂/sodium L ‐ascorbate as catalyst and 1‐methyl‐1H‐imidazolium trifluoroacetate ([Hmim](CF₃COO)) as an ionic‐liquid medium in good to excellent yields (Scheme 1).     

Azulene‐substituted pyranylium salts. Syntheses and products characterization

The synthesis of 4‐azulene‐substituted 2,6‐diphenyl‐ and 2,6‐dimethyl‐pyranylium salts and 2‐azulenesubstituted 4,6‐dimethyl‐pyranylium salts by nucleophilic substitution at pyranylium moiety with various azulenes was studied. The starting materials for 2,6‐diphenyl derivatives were 4 chlorinated pyranylium salts. They were obtained by the halogenation with PCl₅ of corresponding pyranones and were used either in situ or after separation. For the synthesis of dimethyl derivatives the corresponding pyranones were treated with POCl₃ and the resulted intermediate was reacted in situ with azulene. In the aim to study the influence of dihedral angle between azulene and pyranylium planes on the recorded spectra, both moieties were adequately substituted. The obtained results were in accord with the calculated values.     

Refinement of Copper(II) Azide with 1‐Alkyl‐5H‐tetrazoles: Adaptable Energetic Complexes

A concept for stabilizing highly sensitive and explosive copper(II) azide with 1‐N‐substituted tetrazoles is described. It was possible to stabilize the system by the use of highly endothermic, nitrogen‐rich ligands. The sensitivities of the resulting energetic copper coordination compounds can be tuned further by variation of the alkyl chain of the ligands and by phlegmatization of the complexes with classical additives during the synthesis. It is demonstrated, using the compound based on 1‐methyl‐5H‐tetrazole ([Cu(N₃)₂(MTZ)], 1 ) that this class of complexes can be applied as a potential replacement for both lead azide (LA) and lead styphnate (LS). The complex was extensively investigated according to its chemical (elemental analysis, single‐crystal and powder X‐ray diffraction, IR spectroscopy, scanning electron microscopy) and physico‐chemical properties (differential thermal analysis, sensitivities towards impact, friction, and electrostatic discharge) compared to pure copper(II) azide.     

Silver(I)‐N‐heterocyclic carbene complexes of bis‐imidazol‐2‐ylidenes having different aromatic‐spacers: synthesis,crystal structure,and in vitro antimicrobial and anticancer studies

A series of Ag(I) complexes ( 6 , 7 , 8 , 9 ) derived from imidazol‐2‐ylidenes was synthesized by reacting Ag₂O with an o‐, m‐, p‐xylyl or 1,3,5‐triazine‐linked imidazolium salts ( 1 , 2 , 3 , 4 ) and then characterizing these using various spectro‐analytical techniques. Additionally, triazine‐linked bis‐imidazolium salt 5 was characterized using the single‐crystal X‐ray diffraction method. Complexes 6–9 were formed from the N‐heterocyclic carbene ligand precursors 1–3 as PF₆^‐ salts in good yields. Conversely, salt 5 does not form Ag(I) complex even under various reaction conditions. Using ampicillin as a standard, complexes 6–9 were tested against bacteria strains Escherichia coli and Staphylococcus aureus as Gram‐negative and Gram‐positive bacteria, respectively, showing potent antimicrobial activities against the tested bacteria even at minimum inhibition concentration and bacterial concentration levels. Furthermore, the potential anticancer activities of the reported complexes were evaluated against the human colorectal cancer (HCT 116) cell lines, using 5‐fluorouracil as a standard drug. The highest anticancer activities were observed for complex 8 with an IC₅₀ value of 3.4 μm , whereas the lowest was observed for complex 9 with an IC₅₀ value of 18.1 μm . Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis and Characterization of Bis(triaminoguanidinium) 5,5′‐Dinitrimino‐3,3′‐azo‐1H‐1,2,4‐triazolate – A Novel Insensitive Energetic Material

The synthesis of 5,5′‐diamino‐3,3′‐azo‐1H‐1,2,4‐triazole ( 3 ) by reaction of 5‐acetylamino‐3‐amino‐1H‐1,2,4‐triazole ( 2 ) with potassium permanganate is described. The application of the very straightforward and efficient acetyl protection of 3,5‐diamino‐1H‐1,2,4‐triazole allows selective reactions of the remaining free amino group to form the azo‐functionality. Compound 3 is used as starting material for the synthesis of 5,5′‐dinitrimino‐3,3′‐azo‐1H‐1,2,4‐triazole ( 4 ), which subsequently reacted with organic bases (ammonia, hydrazine, guanidine, aminoguanidine, triaminoguanidine) to form the corresponding nitrogen‐rich triazolate salts ( 5 – 9 ). All substances were fully characterized by IR and Raman as well as multinuclear NMR spectroscopy, mass spectrometry, and differential scanning calorimetry. Selected compounds were additionally characterized by low temperature single‐crystal X‐ray diffraction measurements. The heats of formation of 4 – 9 were calculated by the CBS‐4M method to be 647.7 ( 4 ), 401.2 ( 5 ), 700.4 ( 6 ), 398.4 ( 7 ), 676.5 ( 8 ), and 1089.2 ( 9 ) kJ · mol^–1. With these values as well as the experimentally determined densities several detonation parameters were calculated using both computer codes EXPLO5.03 and EXPLO5.04. In addition, the sensitivities of 5 – 9 were determined by the BAM drophammer and friction tester as well as a small scale electrical discharge device.     

Synthese und Kristallstruktur von 2‐Azido‐4,6‐dichloro‐s‐triazin

Synthesis and Crystal Structure of 2‐Azido‐4,6‐dichloro‐s‐triazine Single crystals of 2‐azido‐4,6‐dichloro‐s‐triazine were obtained from a reaction between cyanuric chloride and sodium azide. The structure of this compound was determined by single crystal X‐ray diffraction. 2‐Azido‐4,6‐dichloro‐s‐triazine crystallizes in the orthorhombic space group Pbca (no. 61), Z = 8, a = 746.48(8) pm, b = 952.6(1) pm, c = 2001.6(2) pm. The crystal structure contains (C₃N₃)(N₃)Cl₂ molecules being arranged in a tape‐like fashion, with tapes running along a‐axis direction. The tapes are combined with each other by interlocking azide‐ligands including an angle of approximately 90°. This arrangement leads to the formation of corrugated layers in the crystal structure.     

Cu (I) Catalyzed One Pot SN‐Click Reactions of Halogenated Coumarins and 1‐aza‐coumarins

A one pot three component, copper catalyzed azide‐alkyne cycloaddition reaction has been employed for the synthesis of bis‐coumarinyl triazoles ( A – D ) using 4‐chloro, 4‐bromomethyl, 3‐bromoacetyl and 4‐bromomethyl‐1‐aza‐coumarins ( I – IV ), sodium azide, and coumarin propargyl ethers ( V – IX ) in moderate yields.     

Synthesis of azide end‐functionalized isotactic polypropylene building block and renewed modular synthesis of diblock copolymers of isotactic polypropylene and poly(ε‐caprolactone)

This article details a synthesis of azide end‐functionalized isotactic polypropylene (i‐PP), a unique polymeric building block that can engage in Huisgen's 1,3‐dipolar cycloaddition of azide and alkyne (click reaction) to construct well‐defined i‐PP‐based polymer architecture. Controlled, consecutive chain transfer reaction to 1,2‐bis(4‐vinylphenyl)ethane and hydrogen in metallocene‐mediated propylene polymerization catalyzed by rac‐Me₂Si(2‐Me‐4‐Ph‐Ind)₂ZrCl₂/MAO resulted in styryl‐terminated i‐PP (i‐PP‐t‐St) of controlled molecular weight. Following a regioselective hydrochlorination reaction, the terminal styryl groups were quantatively transformed to 1‐chloroethylbenzene groups, which was further reacted with NaN₃ to give i‐PP terminated with an azide group (i‐PP‐t‐N₃). Structural monitoring of the polymers through the whole transformation process using ¹H NMR and FTIR as well as GPC and DSC reveals a clean and clear formation of i‐PP‐t‐N₃ (M_n in between 10,000 and 40,000 g/mol). This clickable i‐PP building block was applied to a renewed, modular synthesis of amphiphilic i‐PP‐b‐PCL (poly(ε‐caprolactone)) diblock copolymers. Composition‐diversified, structure‐well defined diblock copolymers were obtained in high yields, confirming both the high end group selectivity as well as high reactivity of azide the clickable moiety in the i‐PP building block and the effectiveness of azide‐alkyne click reaction in constructing new i‐PP architecture. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011