Mixed adsorption of fluorinated and hydrogenated surfactants

The adsorption isotherms of sodium perfluorooctanoate and sodium decyl sulfate and their 1:1 mixture on gamma-alumina are recorded by depletion-type experiments with (1)H and (19)F NMR spectroscopy as the detection tool. The isotherms of the different surfactant species, obtained with and without added salt, closely resemble each other. Salt addition changes the isotherms from stepwise to the familiar S-shaped. After having reached saturation, a further increase of surfactant concentration in the mixed system leads to decyl sulfate desorption and increased perfluorooctanoate adsorption. The (19)F chemical shift of adsorbed perfluorooctanoate suggests that, for saturated surfaces, the two sorts of adsorbed surfactants form molecularly mixed surface aggregates.     

Protein-surfactant interaction: differences between fluorinated and hydrogenated surfactants

The interactions of proteins with fluorinated/hydrogenated surfactants were investigated by circular dichroism and turbidity measurement. Pairs of fluorinated and hydrogenated surfactants with similar critical micelle concentrations (cmc), including sodium perfluorooctanoate/sodium decylsulfate and lithium perfluorononanoate/sodium dodecylsulfate were compared in view of their interactions with proteins including BSA, lysozyme, β-lactoglobulin and ubiquitin. It was found that fluorinated surfactants exhibited stronger interactions with proteins than hydrogenated ones, which, however, depended on the structures of both proteins and surfactant molecules. If the proteins are very stable, or the surfactant–protein interactions are very strong, such differences between the two kinds of surfactants might be indistinguishable.     

NMR studies on selectivity of beta-cyclodextrin to fluorinated/hydrogenated surfactant mixtures

The interactions between beta-cyclodextrin (beta-CD) and the equimolar/nonequimolar mixtures of sodium perfluorooctanoate (C(7)F(15)COONa, SPFO) and sodium alkyl sulfate (C(n)H(2n+1)SO(4)Na, C(n)SO(4), n = 8, 10, 12) were investigated by 1H and 19F NMR. It showed that beta-CD preferentially included the fluorinated surfactant when exposed to mixtures of hydrogenated (C(n)SO(4)) and fluorinated (SPFO) surfactants, notwithstanding whether the hydrogenated surfactant C(n)SO(4) was more or less hydrophobic than the SPFO. Such preferential inclusion of the fluorinated surfactant continued to a certain concentration of beta-CD at which time the C(n)SO(4) was then observed to be included. The longer the hydrocarbon chain of C(n)SO(4) the lower the concentration of beta-CD at which the hydrogenated surfactants began to show inclusion. The inclusion process can be qualitatively divided into three stages: first, formation of 1:1 beta-CD/SPFO complexes; second, formation of 1:1 beta-CD/C(n)SO(4) complexes; and finally, formation of 2:1 beta-CD/SPFO complexes upon further increase of beta-CD concentration. In the concentration range studied, during the last stage of inclusion both 2:1 beta-CD/C(12)SO(4) and 2:1 beta-CD/SPFO complexes appear to be simultaneously formed in the system of beta-CD/SPFO/C(12)SO(4) but not in either the systems of beta-CD/SPFO/C(8)SO(4) or beta-CD/SPFO/C(10)SO(4). The selective inclusion of the shorter fluorocarbon chain surfactant might be attributed to the greater rigidity and size of the fluorocarbon chains, compared to those of the hydrocarbon chains, which provide for a tighter fit and better interaction between the host and guest. This latter effect appears to dominate the increase in hydrophobic character as the carbon chain length increases in the hydrogenated series.     

Fluorinated ionic surfactant microemulsions in hydrofluorocarbon 134a (HFC 134a)

The factors influencing the formation of water-in-134a-propellant microemulsions using the fluorinated ionic surfactants ammonium perfluorooctanoate, ammonium perfluoroheptanoate, and sodium perfluorooctanoate has been determined. None of the fluorinated ionic surfactants could be used to prepare clear, one-phase systems when used as sole surfactant, but they could be when combined with a short-chain fluoro- or hydrocarbon alcohol in surfactant:cosurfactant weight-mixing ratios (K(m)) in the range 1:2 to 2:1. When hydrocarbon alcohols were used this clear region extended over a wide range of compositions and was confirmed by means of photon correlation spectroscopy (PCS) to contain microemulsion droplets in the propellant-rich part of the phase diagram. PCS studies performed in the presence of the water-soluble drug terbutaline sulfate showed that it was possible to solubilize the drug within water-in-propellant microemulsion droplets. These studies confirm for the first time that it is possible to prepare water-in-propellant 134a microemulsions using fluorinated ionic surfactants and to solubilize water-soluble drugs within these systems.     

反离子对氟表面活性剂的影响1. 表面活性及胶团化作用

通过表面张力和荧光探针法研究了全氟辛酸钠、全氟辛酸铵以及全氟辛酸四烷基铵[C₇F₁₅COON(C_nH_2n+1)₄, n＝1, 2, 3, 4]的表面活性以及胶团化作用, 系统地讨论了各种反离子, 特别是反离子大小的影响. 结果表明, 与普通碳氢表面活性剂不同, 反离子对这类氟表面活性剂的表面活性以及胶团化作用有很大影响. 表面活性剂的临界胶束浓度(cmc)随反离子的增大而下降; 饱和吸附层中平均每个分子所占的面积则大致随反离子的增大而增大. 而表面张力的变化则较为复杂. cmc时的表面张力随反离子的增大先上升(从全氟辛酸铵到全氟辛酸四乙铵)后下降(从全氟辛酸四乙铵到全氟辛酸四丁铵). 通过反离子的空间位阻、疏水性、插入以及电荷屏蔽效应对上述结果做了解释.     

Mixed fluorinated-hydrogenated surfactant-based system: preparation of ordered mesoporous materials

We have investigated a mixed fluorinated-hydrogenated surfactant-based system [C8F17C2H4(OC2H4)9-C12H25(OC2H4)8] in water. The phase diagram exhibits that the micellar domain can be divided into three parts: above 80 wt% of water both hydrogenated and fluorinated surfactants are completely miscible and they formed mixed micelles in all proportion. When the water concentration is decreased from 80 to 60 wt% a gap of miscibility appears and two micellar zones, one fluorocarbon-rich micelles and one hydrocarbon-rich micelles are observed. The liquid crystal domain is composed of one fluorocarbon-rich (H(F)(1)) and one hydrocarbon-rich (H(H)(1)) hexagonal phase. The hydrophobic radius and the cross-sectional area remain constant in the H(H)(1) and in the H(F)(1) domains. Moreover, SAXS measurements proved that the hydrophobic chains in the liquid crystal phases adopt rather an extended conformation. Then the mixture of surfactants was used as template for the preparation of mesoporous materials. Mesostructured silicas with a well hexagonal array of their channels were prepared via a cooperative templating mechanism (CTM), if the loading of fluorinated surfactant is larger than 50%. Decreasing the proportion of the fluorinated amphiphile in the mixture leads to the formation of mesoporous silica with a disordered structure. In this case the channel arrangement is no longer governed by the fluorinated surfactant but by the hydrogenated one.     

Hybrid fluorocarbon-hydrocarbon CO2-philic surfactants. 1. synthesis and properties of aqueous solutions

Six different hybrid fluorocarbon-hydrocarbon (F-H) sulfate and sulfonate surfactants, with variations in the relative F/H carbon chain length, have been synthesized and characterized in aqueous solution. These compounds have been targeted for potential activity in densified CO2. Tensiometric data and chemical analyses were consistent with surfactants of high chemical purity. Fluorination in terms of the F/H ratio exerts a strong control over all the surfactant physicochemical properties, including critical micelle concentrations (cmc's) and adsorption isotherms. One of these partially fluorinated surfactants (the sulfonate phi-F6H4) achieves very low surface tensions in water (gamma(cmc) approximately 19 mN m(-1)) more reminiscent of fully fluorinated double-chain compounds. Detailed 19F NMR studies revealed that omega'-CF3 groups can exhibit separate signals for monomeric and micellized forms, hence facilitating cmc determinations. Small-angle neutron scattering investigations confirmed the presence of ellipsoidal or extended disklike micelles, depending on the F-H chain asymmetry. For example, a symmetric hybrid F8H8 generates disklike micelles, whereas chain asymmetry in F8H4 or phi-F6H4 tends to drive cylindrical aggregation structures. These changes are consistent with variations in the surfactant packing parameter caused by the different chain F/H ratios. Hence, adsorption and aggregation are shown to respond in a predictable way to the molecular structure of these unusual surfactants.     

Photophysics of a cationic biological photosensitizer in anionic micellar environments: combined effect of polarity and rigidity

A steady-state and time-resolved photophysical study of a cationic phenazinium dye, phenosafranin (PSF), has been investigated in well-characterized biomimetic micellar nanocavities formed by anionic surfactants of varying chain lengths, namely, sodium decyl sulfate (S(10)S), sodium dodecyl sulfate (S(12)S), and sodium tetradecyl sulfate (S(14)S). In all these micellar environments, the charge transfer fluorescence of PSF shows a large hypsochromic shift along with an enhancement in the fluorescence quantum yield as compared to that in aqueous medium. A reduction in the nonradiative deactivation rate within the hydrophobic interior of micelles led to an increase in the fluorescence yield and lifetime. The present work shows the degree of accessibility of the fluorophore toward the ionic quencher in the presence of surfactants of different surfactant chain lengths. The fluorometric and fluorescence quenching studies suggest that the fluorophore resides at the micelle-water interfacial region. The enhancements in the fluorescence anisotropy and rotational relaxation time of the probe in all the micellar environments from the pure aqueous solution suggest that the fluorophore binds in motionally restricted regions introduced by the micelles. Polarity and viscosity of the microenvironments around the probe in the micellar systems have been determined. The work has paid proper attention to the hydrophobic effect of the surfactant chain length on photophysical observations.     

Mixtures of hydrogenated and fluorinated lactobionamide surfactants with cationic surfactants: study of hydrogenated and fluorinated chains miscibility through potentiometric techniques

The work reported herein deals with the aqueous behavior of hydrocarbon and/or fluorocarbon ionic and nonionic surfactants mixtures. These mixtures were studied using potentiometric techniques in NaBr (0.1 mol L-1) aqueous solution as well as in pure water. Mixed micelles were formed from a cationic surfactant (dodecyl or tetradecyltrimethylammonium bromide respectively called DTABr or TTABr) and neutral lactobionamide surfactants bearing a hydrogenated dodecyl chain (H12Lac) or a fluorinated chain (CF3-(CF2)5-(CH2)2- or CF3-(CF2)7-(CH2)2-). We showed that concentrations of ionic and nonionic surfactants in the monomeric form as well as the composition of the mixed micelles can be specified thanks to a potentiometric technique. The complete characterization does not request any model of micellization a priori. The activities of the micellar phase constituents, as well as the free enthalpies of mixing, were calculated. The subsequent interpretation only relies on the experimental characterization. Comparison of the behaviors of the various systems with a model derived from the regular solution theory reveals the predominant part of electrostatic interactions in the micellization phenomenon. It also appears that the energy of interaction between hydrogenated and fluorinated chains is unfavorable to mixing and is of much lower magnitude than the electric charges interactions.     

Segregation phenomena in micelles from mixtures of fluorinated and hydrogenated surfactants

Mixtures of hydrogenated and fluorinated surfactants are known to form either mixed or segregated micelles: the conclusions are much dependant on the precision of the experimental measurements and on the model used for interpretation. Recently, mixed surfactant solutions were probed at the micellar or molecular level by SANS, fluorescence or NMR. It leads to an intermediate structure for the mixed micelles with an intramicellar segregation of the fluorinated and hydrogenated surfactant.This intramicellar segregation was also observed in a variety of more complex systems which are rapidly surveyed in the second part.     

The effects of alkyl sulfates on the analysis of phenolic compounds by microchip capillary electrophoresis with pulsed amperometric detection

The effects of different surfactants (sodium 2-ethylhexyl sulfate, sodium decyl sulfate, sodium dodecyl sulfate and sodium tetradecyl sulfate) on the analysis of phenolic compounds by microchip-CE with pulsed amperometric detection were investigated. Using sodium decyl sulfate as a model surfactant, the effects of concentration and pH were examined. Under the optimized conditions, the analysis of six phenolic compounds was performed and compared with control runs performed without surfactant. When these surfactants were present in the run buffer, decreases in the migration time and increases in the run-to-run reproducibility were observed. Systematic improvements in the electrochemical response for the phenolic compounds were also obtained. According to the results presented, surfactants enhance the analyte-electrode interaction and facilitate the electron transfer process. These results should allow a more rational selection of the surfactants based on their electrophoretic and electrochemical effects.     

Miscibility of sodium dodecyl sulfate and sodium decyl sulfate in the adsorbed film and micelle

The interfacial tension of the aqueous solution of sodium dodecyl sulfate (SDS) and sodium decyl sulfate (SDeS) mixture against hexane was measured as a function of the total molality and composition of the surfactant mixture at 298.15 K under atmospheric pressure. The compositions of adsorbed film and micelle were evaluated numerically by applying the thermodynamic relations to the experimental results. These results were shown in the form of the phase diagrams of adsorption and micelle formation and compared with those of the aqueous solution of sodium perfluorooctanoate (SPFO) and SDeS mixture. It was found that the diagrams of SDS and SDeS system have swollen cigar shapes and are quite different from those of SPFO and SDeS system which show non-ideal mixing both in the adsorbed film and micelle. This finding was attributed to the fact that the interaction between fluorocarbon and hydrocarbon chains is weaker than that between hydrocarbon chains.     

Micellar kinetics of a fluorosurfactant through stopped-flow NMR

19F NMR chemical shifts and transverse relaxation times T2 were measured as a function of time after quick stopped-flow dilution of aqueous solutions of sodium perfluorooctanoate (NaPFO) with water. Different initial concentrations of micellar solution and different proportions of mixing were tested. Previous stopped-flow studies by time-resolved small-angle X-ray scattering (TR-SAXS) detection indicated a slow (approximately 10 s) micellar relaxation kinetics in NaPFO solutions. In contrast, no evidence of any comparable slow (>100 ms) relaxation process was found in our NMR studies. Possible artifacts of stopped-flow experiments are discussed as well as differences between NMR and SAXS detection methods. Upper bounds on the relative weight of a slow relaxation process are given within existing kinetic theories of micellar dissolution.     

Structural micellar transition for fluorinated and hydrogenated sodium carboxylates induced by solubilization of benzyl alcohol

The solubility of benzyl alcohol in micellar solutions of sodium octanoate and sodium perfluorooctanoate was studied. From the isotherms of specific conductivity versus molality at different alcohol concentrations, the critical micelle concentration and the degree of ionization of the micelles were determined. The cmc linearly decreases upon increasing the amount of benzyl alcohol present in aqueous solutions with two distinct slopes. This phenomenon was interpreted as a clustering of alcohol molecules above a critical point, around 0.1 mol kg(-1). Attending to the equivalent conductivity versus square root of molality, the presence of a second micellar structure for the fluorinated compound was assumed. The thermodynamic parameters associated with the process of micellization were estimated by applying Motomura's model for binary surfactant mixtures, modified by Pérez-Villar et al. (Colloid Polym. Sci 1990, 268, 965) for the case of alcohol-surfactant solutions. A comparison of the hydrogenated and fluorinated compounds was carried out and discussed.     

Hydrogenated/fluorinated catanionic surfactants as potential templates for nanostructure design

The structure and physicochemical properties of the nanoparticles spontaneously formed within aqueous mixtures of the hydrogenated/fluorinated catanionic surfactant cetyltrimetylammonium perfluorooctanoate in the absence of counterions as a function of its concentration are investigated by a combined experimental/computational study at room temperature. Apparent molar volumes, isentropic apparent molar compressibilities, and dynamic light scattering measurements together with transmission and cryo-scanning electron as well as confocal laser microscopy images, and computational molecular dynamics simulations indicate that a variety of structures of different sizes coexist in solution with vesicles of ～160 nm diameter. Interestingly, the obtained nanostructures were observed to self-assemble from a random distribution of monomers in a time scale easily accessible by atomistic classical molecular dynamics simulations, allowing to provide a comprehensive structural and dynamic characterization of the surfactant molecules at atomic level within the different aggregates. Overall, it is demonstrated that the use of mixed fluorinated hydrogenated surfactant systems represents an easy strategy for the design of specific nanoscale structures. The detailed structural analysis provided in the present work is expected to be useful as a reference to guide the design of new nanoparticles based on different hydrogenated/fluorinated catanionic surfactants.     

Nonionic fluorinated-hydrogenated surfactants for the design of mesoporous silica materials

We have investigated the influence of the ratio between the volume of the hydrophilic head ( V A) and the volume of the hydrophobic part ( V B) of the surfactant on the mesopore ordering. To understand the difference of behavior we have performed a complete study dealing with fluorinated [R m (F)(EO) n ] and hydrogenated [R m (H)(EO) n ] surfactants. Their mixtures have also been taken into account. Here only the phase diagrams and the structural parameters of the liquid crystal phases of the mixed systems are reported. We have shown that the mutual or partial miscibility of the fluorinated and the hydrogenated surfactants depends on the number of oxyethylene units of each surfactant. To follow, various systems were used for the preparation of silica mesoporous materials via a cooperative templating mechanism (CTM). Results clearly reveal that V A/ V B ratios in the range between 0.95 and 1.78 lead to the formation of well-ordered mesostructures. Wormhole-like structures are obtained for higher or lower values. Moreover, results show that from the V A/ V B point of view, polyoxyethylene fluoroalkyl ether surfactants behave like their hydrogenated analogues.     

Polymeric sulfated surfactants with varied hydrocarbon tail: II. Chemical selectivity in micellar electrokinetic chromatography using linear solvation energy relationships study

The effect of hydrocarbon chain length on chemical selectivity in micellar electrokinetic chromatography (MEKC) was investigated using polymeric sulfated surfactants: poly-(sodium 7-octenyl sulfate), poly(sodium 8-nonenyl sulfate), poly(sodium 9-decenyl sulfate), and poly(sodium 10-undecenyl sulfate). Linear solvation energy relationships (LSERs) and free energy of transfer studies were conducted to predict the selectivity differences between the four polymeric surfactants. The overall nature of the solute/ polymeric micelle interactions was found to be different despite the fact that all polymeric surfactants have the same head group. The polar character and acidic strength of the polymeric surfactant are found to decrease as the hydrocarbon chain length of the surfactant is increased. On the other hand, the polarizability of the polymeric sulfated surfactants increases (upon interacting with solute lone-pair electrons) with increasing hydrocarbon chain length. The LSER results show that the solute size and hydrogen bond accepting ability play the key roles in MEKC retention.     

Bonding strength of fluorinated and hydrogenated surfactant to bovine serum albumin

The interactions between bovine serum albumin (BSA) and different surfactants are investigated by the fluorescence technique. Pairs of fluorinated and hydrogenated surfactants with similar hydrophobic chain lengths including potassium perfluorooctanesulfonate and sodium octanesulfonate are studied in order to determine their interactions with BSA. The binding constants and thermodynamic parameters between BSA and different surfactants are compared and the main binding strength is determined. The mechanism of quenching and change of particle size gives rise to the binding force. Based on the FRET theory, the distances between potassium perfluorooctanesulfonate/sodium octanesulfonate and BSA are calculated and it is found that the fluorinated surfactant exhibits stronger interactions with proteins than the hydrogenated one, which is also proved by zeta potential and TEM.     

Mesoscopic simulation of the aggregation behavior of fluorinated surfactant in aqueous solution

The aggregation behavior of fluorinated surfactant in aqueous solution was investigated using dissipative particle dynamics (DPD) simulation method. Simulation results show that fluorinated surfactants behave mainly as their hydrocarbon analogues, having similar sequences of phases and aggregate structures, which are capable of building micelle, hexagonal phase and lamellar phase. But fluorinated surfactants also show interesting differences from hydrocarbon analogues, which can easily form hexagonal and lamellar structures with comparative little curvature. They can also form ellipsoid or rod-like micelles even in very low concentrations instead of spheroid ones. The dynamic aggregation behavior of fluorinated surfactants, as well as the comparison with hydrogenated ones, was also investigated.     

Nonionic fluorinated surfactant: investigation of phase diagram and preparation of ordered mesoporous materials

The behavior of fluorinated surfactant F(CF2)8C2H4(OC2H4)9OH in water solution was investigated, and the preparation ofmesoporous molecular sieves was achieved. A direct micellar phase (L1) and a hexagonal (H1) liquid crystal were found. Small-angle X-ray scattering measurements proved that the hydrophobic chains are completely extended and that the cross sectional area remains constant in H1. At 80 degrees C, materials with a hexagonal array of their channel are prepared via a cooperative templating type mechanism in a wide range of surfactant concentrations (5-20 wt %). Decreasing the hydrothermal temperature leads to the formation ofwormhole-like structure. In this case the channel arrangement is no longer governed by the surfactant behavior but by the silica condensation and polymerization. An increase of the mean pore diameter with heating temperature is noted. This result is associated with changes of aggregation number with temperature. A comparison of the characteristics of the materials obtained with both hydrogenated and fluorinated surfactants is also made.