分子动力学模拟不同组分下CaO-Al2O3-SiO2系玻璃微观结构的转变

采用分子动力学模拟的方法研究了CaO-Al2O3-SiO2系玻璃的微观结构,发现Ca/Al=1/2时CaO-Al2O3-SiO2系玻璃(网硅酸盐体系)并不像传统理论认为的那样是一个完整的三维网络,而是存在一定量的非桥氧,从而从理论上进一步证实了Stebins等人的实验结果.同时也发现不同的Ca/Al比对Si和Al键接方式产生重要影响,在Ca/Al＞1/2时,Al比Si容易成为网络的中间体,其首先插入网络体中间;在Ca/Al＜1/2时,Si比Al容易成为网络中间体.虽然在能量上Al-O-Si占有扰势,但当Ca/Al从大于1/2变化到小于1/2时,仍有部分Al-O-Si转变成Al-O-Al和Si-O-Si,丰富了Al自回避规则的内容.     

Li2O-B2O3-SiO2系统玻璃的Raman光谱研究

在Li₂O≥30mol％的Li₂O-B₂O₃-SiO₂系统玻璃中,以Li₂O代B₂O₃或SiO₂都导致玻璃网络中带非桥氧的硼酸盐和硅酸盐基团的量的增加;以B₂O₃代SiO₂则使玻璃网络中带和不带非桥氧的硼酸盐基团以及带非桥氧的硅酸盐基团的量都增加。 关键词：     

B2O3-Na2O-CaO-SiO2玻璃结构的拉曼光谱研究

制备了B₂O₃-Na₂O-CaO-SiO₂四元系若干玻璃样品,通过实验拉曼光谱和量子化学从头计算相结合的方法,对其微观结构进行了定性定量研究。结果表明,随着B₂O₃的加入,硅酸盐转变为硼硅酸盐结构。当质量比CaO/SiO₂=1时,B主要以[BO₃]的形式参与网络形成,并在B₂O₃含量为6 Wt%时迹象明显。拉曼光谱精细结构解谱的结果表明,B的加入使结构复杂化,体系中Q₁相对含量减少,Q₃相对含量增加,整体由以Q₂为主变为以Q₂、Q₃为主。     

CaO-Al2O3-SiO2熔渣结构和热导率的分子动力学模拟

利用分子动力学模拟研究CaO-Al₂O₃-SiO₂三元熔渣的微观结构和热导率。针对六组不同Al₂O₃含量的熔渣,基于BMH势函数分析了径向分布函数、键长、键角分布函数、氧类型和微结构单元Qⁿ等微观结构信息。结果表明硅和铝在熔渣中以四面体网络结构存在,硅氧四面体较铝氧四面体更为稳定。随着铝含量增加,熔体中的键长和四面体中心角无明显变化,Al-O-Al和Si-O-Al键角逐渐减小;网络中的桥氧(BO)和三配位氧(TO)含量增加,Q³和Q⁴含量增多,在高铝区出现较多的五配位铝(Al^V)。采用Muller-Plathe方法计算了熔渣的热导率,随着铝替代硅原子,网络的聚合程度增加,强化了熔体的热输运能力,热导率呈现增大趋势。     

NaBO2-B2O3体系玻璃的形成和晶化机制

本文用热学分析、高温和室温X射线衍射分析、红外吸收光谱等方法研究了NaBO₂-B₂O₃体系玻璃的形成、热稳定性和晶化机制。这一体系十分容易形成稳定的非晶玻璃,晶化过程与非晶的宏观状态有关。块状玻璃的晶化温度比非晶粉末高。部分成份晶化后形成不同的物相,熔点也不同。晶化产物的晶体结构类似于玻璃的结构。NaBO₂-B₂O₃体系的电导率用交流阻抗直接测量法测定。玻璃态的电导率比晶态试 关键词：     

Y2O3-Eu2O3-SnO2三元系固相线下相关系及其发光性质研究

采用固态反应法及改良固态反应法合成了一系列Y₂O₃-Eu₂O₃-SnO₂体系中的试样，利用X射线粉末衍射法测定了Y₂O₃-Eu₂O₃-SnO₂三元系固相线下的相关系.结果表明，Y₂O₃-Eu₂O₃二元系 关键词： 2O₃-Eu₂O₃-SnO₂三元系')" href="#">Y₂O₃-Eu₂O₃-SnO₂三元系 烧绿石型结构 激发光谱 发射光谱     

Li2O-(LiCl)2-B2O3-Al2O3系统玻璃的Raman光谱研究

我们用Raman光谱研究了Li₂O(LiCl)₂B₂O₃-Al₂O₃系玻璃的结构,着重研究了Al₂O₃的影响。对于Li₂O-B₂O₃系玻璃,Li₂O含量增加使玻璃中存在的BO₃三角体转变为BO₄四面体, 关键词：     

SrBi2Ta2O9/Bi4Ti3O12复合铁电薄膜的制备与特性研究

采用溶胶凝胶工艺在p-Si衬底上制备了SrBi₂Ta₂O₉/Bi₄Ti₃O₁₂复合铁电薄膜. 研究了SrBi₂Ta₂O₉/Bi₄Ti₃O₁₂复合薄膜的微观结构与生长行为、铁电性能和疲劳特性. 研究表明: Si衬底Bi₄Ti< 关键词： 2Ta₂O₉')" href="#">SrBi₂Ta₂O₉ 4Ti₃O₁₂')" href="#">Bi₄Ti₃O₁₂ 复合铁电薄膜 溶胶凝胶工艺     

Er3+掺杂SiO2复合的Al2O3粉末结构及光致发光特性

采用溶胶-凝胶(sol-gel)工艺制备0.1 mol% Er³⁺掺杂Al₂O₃体系和SiO₂-Al₂O₃复合体系粉末. 实验结果表明：5 mol%的SiO₂复合加入Al₂O₃抑制γ→θ和θ→α相转变. 掺0.1 mol%Er³⁺:Al₂O₃体系粉末，900℃烧结，在1.47—1.63μm波段内光致发光(PL)谱为中心波长1.53 μm、半高宽56 nm的单一宽峰，1000—1200℃烧结，劈裂为多峰PL谱. 掺0.1 mol%Er³⁺:SiO₂-Al₂O₃复合体系粉末，在高达1200℃烧结，仍保持中心波长1.53 μm的单一宽峰PL谱，由于—OH更完全的脱除，PL强度较900℃烧结Al₂O₃体系，SiO₂-Al₂O₃复合体系均提高1个数量级. 关键词： 2-Al₂O₃复合体系')" href="#">SiO₂-Al₂O₃复合体系 掺铒 溶胶-凝胶工艺 光致发光     

Eu2+掺杂P2O5-BaO-Na2O-K2O与Na2O-TeO2-ZnO系统玻璃的制备与光谱性质

用高温熔融法,把Eu₂O₃掺入到P₂O₅-BaO-Na₂O-K₂O与Na₂O-TeO₂-ZnO系统玻璃中。测定了玻璃的荧光光谱与激发光谱。结果表明,Eu离子在P₂O₅-BaO-Na₂O-K₂O玻璃中呈现出Eu³⁺态。然而在Na₂O-TeO₂-ZnO系统玻璃中,尽管在空气气氛下,大部分的Eu离子在玻璃中以二价的状态存在。从玻璃的结构及化学组分解释了产生Eu²⁺的原因。在磷酸盐玻璃配料中加入适量的硅粉(Si)作还原剂,能有效地把玻璃中的极大部分Eu³⁺还原成Eu²⁺,获得含Eu²⁺的优质透明磷酸盐玻璃。     

Structure and photoluminescence properties of Er3+-doped TiO2-SiO2 powders prepared by sol-gel method

Er 3+-doped TiO 2-SiO 2 powders are prepared by the sol-gel method,and they are characterized by high resolution transmission electron microscopy (HR-TEM),X-ray diffraction (XRD) spectra,and Raman spectra of the samples.It is shown that the TiO 2 nanocrystals are surrounded by an SiO 2 glass matrix.The photoluminescence (PL) spectra are recorded at room temperature.A strong green luminescence and less intense red emission are observed in the samples when they are excited at 325 nm.The intensity of the emission,which is related to the defect states,is strongest at the annealing temperature of 800 C.The PL intensity of Er 3+ ions increases with increasing Ti/Si ratio due to energy transfer between nano-TiO 2 particles and Er 3+ ions.     

Substrate effects on the oxygen gas sensing properties of SnO2/TiO2 thin films

In this study, SnO₂/TiO₂ thin films are fabricated on SiO₂/Si and Corning glass 1737 substrates using a R.F. magnetron sputtering process. The gas sensing properties of these films under an oxygen atmosphere with and without UV irradiation are carefully examined. The surface structure, morphology, optical transmission characteristics, and chemical compositions of the films are analyzed by atomic force microscopy, scanning electron microscopy and PL spectrometry. It is found that the oxygen sensitivity of the films deposited on Corning glass 1737 substrates is significantly lower than that of the films grown on SiO₂/Si substrates. Therefore, the results suggest that SiO₂/Si is an appropriate substrate material for oxygen gas sensors fabricated using thin SnO₂/TiO₂ films.     

XPS investigation of diffusion of two-layer ZrO2/SiO2 and SiO2/ZrO2 sol–gel films

Two-layer ZrO₂/SiO₂ and SiO₂/ZrO₂ films were deposited on K9 glass substrates by sol–gel dip coating method. X-ray photoelectron spectroscopy (XPS) technique was used to investigate the diffusion of ZrO₂/SiO₂ and SiO₂/ZrO₂ films. To explain the difference of diffusion between ZrO₂/SiO₂ and SiO₂/ZrO₂ films, porous ratio and surface morphology of monolayer SiO₂ and ZrO₂ films were analyzed by using ellipsometry and atomic force microscopy (AFM). We found that for the ZrO₂/SiO₂ films there was a diffusion layer with a certain thickness and the atomic concentrations of Si and Zr changed rapidly; for the SiO₂/ZrO₂ films, the atomic concentrations of Si and Zr changed relatively slowly, and the ZrO₂ layer had diffused through the entire SiO₂ layer. The difference of diffusion between ZrO₂/SiO₂ and SiO₂/ZrO₂ films was influenced by the microstructure of SiO₂ and ZrO₂.     

Y掺杂Al2O3高k栅介质薄膜的制备及性能研究

利用射频反应共溅射方法制备了Y掺杂Al₂O₃电介质薄膜，用掠入射x射线衍射检测了薄膜的结构，用高分辨率扫描电子显微镜(HRSEM)、原子力显微镜(AFM)观察了薄膜断面和表面形貌，用高频C-V和变频C-V及J-V测量了样品的电学特性. 结果表明，Y的掺入使电介质薄膜的介电常数k有了很大提高(8.14—11.8)，并体现出了较好的介电特性. 分析认为：与氧具有较大电负性差的Y离子的加入，增大了薄膜中的金属—氧键(M—O)的强度；同时，Y的加入使Al₂O₃的结构和原子配位发生了改变，从而提高了离子极化对薄膜介电常数的贡献. 退火前后的XRD谱均显示薄膜为非晶态；HRSEM断面和AFM形貌像显示所制备的薄膜非常平整，能够满足器件要求. 关键词： 高k栅介质 掺杂氧化铝 射频反应溅射     

Luminescence studies on ZnO-P2O5 glasses doped with Gd2O3:Eu nanoparticles and Eu2O3

Zinc phosphate glasses doped with Gd₂O₃:Eu nanoparticles and Eu₂O₃ were prepared by conventional melt-quench method and characterized for their luminescence properties. Binary ZnO-P₂O₅ glass is characterized by an intrinsic defect centre emission around 324 nm. Strong energy transfer from these defect centres to Eu³⁺ ions has been observed when Eu₂O₃ is incorporated in ZnO-P₂O₅ glasses. Lack of energy transfer from these defect centres to Eu³⁺ in Gd₂O₃:Eu nanoparticles doped ZnO-P₂O₅ glass has been attributed to effective shielding of Eu³⁺ ions from the luminescence centre by Gd-O-P type of linkages, leading to an increased distance between the luminescent centre and Eu³⁺ ions. Both doped and undoped glasses have the same glass transition temperature, suggesting that the phosphate network is not significantly affected by the Gd₂O₃:Eu nanoparticles or Eu₂O₃ incorporation.     

Phase relations in the ZnO-V2O5-K2O system

The subsolidus phase relations of a ZnO-V 2 O 5-K 2 O system are investigated by X-ray powder diffraction.There is 1 ternary compound,11 binary compounds and 14 three-phase regions in this system.The phase diagrams of V 2 O 5 K 2 O with the K 2 O content ranging from 0 to 71 mol% and pseudo-binary system of ZnO-K 2 ZnV 2 O 7 are also studied by X-ray powder diffraction and differential thermal analysis methods.     

多孔TiO2/Al/SiO2纳米复合结构的紫外光吸收特性研究

在SiO₂玻璃衬底上用脉冲激光沉积(PLD)技术，分别沉积Ti和Ti/Al膜，经电化学阳极氧化成功制备了多孔TiO₂/SiO₂和TiO₂/Al/SiO₂纳米复合结构. 其中TiO₂薄膜上的微孔阵列高度有序，分布均匀. 实验研究了Al过渡层对多孔TiO₂薄膜光吸收特性的影响. 结果表明：无Al过渡层的多孔TiO₂薄膜其紫外吸收峰在27     

氧氩比对SnO2/Ag/SnO2透明导电膜光电性能的影响

在室温及不同的氧氩比条件下,采用射频磁控溅射Ag层和直流磁控溅射SnO₂层,在载玻片衬底上制备出了SnO₂/Ag/SnO₂多层薄膜.用霍尔效应测试仪、四探针电阻测试仪和紫外-可见-近红外光谱仪等表征了薄膜的电学性质和光学性质.实验结果表明:当氧氩比为1:14时,所制得的薄膜的光电性质优良指数最大,为1.69×10^-2 Ω^-1;此时,薄膜的电阻率为9.8×10^-5 Ω·cm,方电阻为9.68 Ω/sq,在400~800 nm可见光区的平均光学透射率达85%;并且,在氧氩比为1:14时,利用射频磁控溅射Ag层和直流磁控溅射SnO₂层在PET柔性衬底上制备出了光电性质优良的柔性透明导电膜,其在可见光区的平均光学透过率达85%以上,电阻率为1.22×10^-4 Ωcm,方电阻为12.05 Ω/sq.     

多孔TiO2/Al/SiO2纳米复合结构的紫外光吸收特性研究

在SiO₂玻璃衬底上用脉冲激光沉积(PLD)技术,分别沉积Ti和Ti/Al膜,经电化学阳极氧化成功制备了多孔TiO₂/SiO₂和TiO₂/Al/SiO₂纳米复合结构. 其中TiO₂薄膜上的微孔阵列高度有序,分布均匀. 实验研究了Al过渡层对多孔TiO₂薄膜光吸收特性的影响. 结果表明：无Al过渡层的多孔TiO₂薄膜其紫外吸收峰在27 关键词： 2薄膜')" href="#">多孔TiO₂薄膜 阳极氧化 紫外光吸收     

Correlation between Al2O3 particles and interface of Al-Al2O3 coatings by cold spray

Al-Al₂O₃ composite coatings with different Al₂O₃ particle shapes were prepared on Si and Al substrate by cold spray. The powder compositions of metal (Al) and ceramic (Al₂O₃) having different sizes and agglomerations were varied into ratios of 10:1 wt% and 1:1 wt%. Al₂O₃ particles were successfully incorporated into the soft metal matrix of Al. It was found that crater formation between the coatings and substrate, which is typical characteristic signature of cold spray could be affected by initial starting Al₂O₃ particles. In addition, when the large hard particles of fused Al₂O₃ were employed, the deep and big craters were generated at the interface between coatings and hard substrates. In the case of pure soft metal coating such as Al on hard substrate, it is very hard to get proper adhesion due to lack of crater formation. Therefore, the composite coating would have certain advantages.