Correlation between spectroscopic and morphological properties of composite P3HT/PCBM nanoparticles studied by single particle spectroscopy

We report the fabrication and characterization of composite nanoparticles consisting of a conducting polymer, poly-3-hexylthiophene (P3HT), doped with varying amounts of [6,6]-phenyl C61-butyric acid methyl ester (PCBM), a material blend that is commonly applied in bulk heterojunction organic photovoltaic devices (OPVs). Single particle spectroscopy (SPS) studies, where nanoparticles are studied one particle at a time, reveal that these nanoparticles have spectroscopic characteristics consistent with the existence of two types of crystalline nanodomains, one with a higher energy emission at 660 nm and one with a lower energy emission at 720 nm. In addition, the occurrence of emission at lower peak energy increases with increasing PCBM doping levels, and the intensity of the lower energy peak emission increases with respect to the higher energy peak emission as well. These data reveal a PCBM concentration dependent formation of two types of P3HT crystalline nanodomains in P3HT/PCBM composite nanoparticles, where the lower energy crystal structure becomes more favored with higher PCBM concentration. This work provides a molecular scale insight in the correlation between changes in morphology of conjugated polymer materials with different weight percentages of fullerene dopants.     

二甲基亚砜添加剂对聚合物太阳能电池性能的影响

研究了二甲基亚砜(DMSO)掺杂浓度对基于聚(3-己基噻吩)(P3HT)和(6,6)-苯基碳60丁酸甲酯(PCBM)为有源层的聚合物太阳能电池性能影响。结果表明,掺杂DMSO可以提高聚合物太阳能电池短路电流密度和填充因子。DMSO掺杂质量比为3%时,电池短路电流密度提高到7.88 mA·cm-2,填充因子为55.5%。能量转换效率达到2.54％,相比没有掺杂DMSO的电池,能量转换效率提高了17%。傅里叶变换红外光谱被用于鉴定和分析掺杂DMSO对材料P3HT∶PCBM化学性质的影响。傅里叶变换红外光谱表明,掺杂后P3HT和PCBM的化学性质都没有改变。为分析掺杂DMSO改善器件能量转换效率的原因,通过紫外-可见光谱和电流密度-电压特性曲线分别表征器件的光吸收能力以及电致发光器件的载流子迁移率。与P3HT∶PCBM薄膜相比,P3HT∶PCBM∶DMSO薄膜在可见光范围内的吸收峰有明显红移且吸收强度增强。可见光吸收的改善是实现短路电流密度提高的有力保障。太阳能电池性能的增强是因为DMSO的掺杂提高了P3HT∶PCBM的载流子迁移率和吸收光谱宽度。     

Single‐molecule detection of thionine on aggregated gold nanoparticles by surface enhanced Raman scattering

We report observations of single‐molecule detection of thionine and its dynamic interactions on aggregated gold nanoparticle clusters using surface enhanced Raman scattering (SERS). Spectral intensities were found to be independent of the size of Au nanoparticles studied (from 17 to 80 nm) at thionine concentration below 10⁻¹² M or at single‐molecule concentration levels. Raman line separations and, in particular, spectral fluctuations and blinking were also observed, suggesting temporal changes in single molecular motion and/or arrangements of thionine on Au nanoparticle surfaces. In contrast, by using dispersed Au nanoparticles, only ensemble SERS spectra could be observed at relatively high concentrations (> 10⁻⁸ M thionine), and spectral intensities varied with the size of Au nanoparticles. Copyright © 2007 John Wiley & Sons, Ltd.     

Influence of fullerene derivative replacement with TiO2 nanoparticles in organic bulk heterojunction solar cells

In an effort to develop hybrid organic solar cells with improved power conversion efficiency (PCE), devices based on poly (3-hexylthiophene) (P3HT):phenyl C₆₁-butyric acid methyl ester (PCBM) active layer and poly (3,4-ethylenedioxythiophene) (PEDOT):poly (styrenesulfonate) (PSS) buffer layers were prepared. A systematic replacement of PCBM was achieved by introducing nanostructured TiO₂ (∼15 nm particle size), dissolved separately in chlorobenzene (CB) and 1,2 –dichlorobenzene (DCB), to the (P3HT:PCBM) active layer while keeping a fixed amount for P3HT. To understand the effect of fullerene replacement with the inorganic metal oxide nanoparticles on different properties of resulting devices, a variety of techniques such as Current–Voltage (J–V) characteristics, Field Emission Scanning Electron Microscopy (FESEM), Atomic Force Microscopy (AFM), Ultravoilet-Visible (UV–Vis) Spectrophotometry and External Quantum Efficiency (EQE) were employed. The addition of TiO₂ nanoparticles in the active layer improved the power conversion efficiency (PCE) of P3HT:PCBM devices. The addition of TiO₂ nanoparticles using CB as solvent enhanced the absorption in visible region and also introduced a red shift in the absorption spectra. A significant increase in EQE was observed for devices with TiO₂ nanoparticles in the active layer. Mixing TiO₂ also increased the surface roughness of the active layer where TiO₂ nanoparticles were found to agglomerate as their concentration increased relative to fullerene derivative. A complete agglomeration of TiO₂ was observed in the absence of PCBM.     

Fe3O4纳米粒子对P3HT:PCBM电池的影响

为了提高太阳能电池的性能,研究磁性纳米粒子在外加磁场的作用下对聚合物太阳能电池有源层P3HT:PCBM成膜及太阳能电池性能的影响。本文采用热分解法制备了磁性Fe₃O₄纳米粒子,将不同质量分数的Fe₃O₄纳米粒子掺入到P3HT:PCBM溶液中,旋涂后在外加磁场的作用下自组成膜。通过TEM、XRD对制备的Fe₃O₄纳米粒子进行表征,并利用偏光显微镜、原子力显微镜对成膜质量进行探究。结果表明,采用热分解法制备的Fe₃O₄纳米粒子直径在10 nm左右,在外加磁场作用下,Fe₃O₄纳米粒子对成膜有一定的调控作用。当Fe₃O₄纳米粒子掺杂质量分数为1%时,太阳能电池器件的开路电压增加3.77%,短路电流增加24.93%,光电转换效率提高7.82%。     

掺杂石墨烯量子点对P3HT:PCBM太阳能电池性能的影响

为研究掺杂石墨烯量子点(GQDs)对聚合物电池的影响,采用溶剂热法制备了GQDs,掺杂到聚3-己基噻吩和富勒烯衍生物(P3HT∶PCBM)中作光敏层制备了聚合物太阳能电池。掺杂不同浓度的GQDs后,聚合物电池的开路电压和填充因子都比未掺杂器件高。GQDs掺杂质量分数为0.15%时,形成的掺杂薄膜平整、均匀,填充因子提高了17.42%。GQDs经还原后,随还原时间的延长,填充因子FF增大。到45 min时,电池的FF基本稳定,从31.57%提高至40.80%,提高了29.24%。退火后,获得了最佳的掺杂GQDs的聚合物太阳能电池,开路电压Voc为0.54 V,填充因子FF为55.56%,光电转换效率为0.75%。     

Effect of Mn doping on the structural and optical properties of sol-gel derived ZnO nanoparticles

Un-doped and Mn-doped ZnO nanoparticles were successfully synthesized in an ethanolic solution by using a sol-gel method. Material properties of the samples dependence on preparation conditions and Mn concentrations were investigated while other parameters were controlled to ensure reproducibility. It was observed that the structural properties, particle size, band gap, photoluminescence intensity and wavelength of maximum intensity were influenced by the amount of Mn ions present in the precursor. The XRD spectra for ZnO nanoparticles show the entire peaks corresponding to the various planes of wurtzite ZnO, indicating a single phase. The diffraction peaks of doped samples are slightly shifted to lower angles with an increase in the Mn ion concentration, signifying the expansion of the lattice constants and increase in the band gap of ZnO. All the samples show the absorption in the visible region. The absorbance spectra show that the excitonic absorption peak shifts towards the lower wavelength side with the Mn-doped ZnO nanoparticles. The PL spectra of undoped ZnO consist of UV emission at 388 nm and broad visible emission at 560 nm with varying relative peak intensities. The doping of ZnO with Mn quenches significantly the green emission while UV luminescence is slightly affected.     

Magnetic response of NiFe2O4 nanoparticles in polymer matrix

We report the magnetic properties of magnetic nano-composite, consisting of different quantity of NiFe₂O₄ nanoparticles in polymer matrix. The nanoparticles exhibited a typical magnetization blocking, which is sensitive on the variation of magnetic field, mode of zero-field-cooled/field-cooled experiments and particle quantity in the matrix. The samples with lower particle quantity showed an upturn of magnetization down to 5 K, whereas the blocking of magnetization dominates at lower temperatures as the particle quantity increases in the polymer. We examine such magnetic behaviour in terms of the competitive magnetic ordering between core and surface spins of nanoparticles, taking into account the effect of inter-particle (dipole-dipole) interactions on nanoparticle magnetic dynamics.     

Femtosecond optical investigation of electron–lattice interactions in an ensemble and a single metal nanoparticle

Electron–lattice energy exchange is investigated in an ensemble of silver nanoparticles of mean diameter 9 nm and in a single 30-nm particle using a femtosecond pump–probe technique. The dependences of the measured transient transmission change and of the electron energy loss kinetics on the excitation amplitude are compared to the results of numerical simulations of nonequilibrium electron relaxation and of the two-temperature model. The good agreement between the theoretical and experimental data indicates that, for the studied low particle density samples, hot-electron cooling is dominated by electron–lattice coupling in a nanoparticle both for weak and large electron heating with a minor influence of their surrounding environment (glass or polymer matrix). PACS 78.47.+p; 42.65.-k; 73.20.Mf     

Near-edge X-ray absorption fine structure spectroscopy and structural properties of Ni-doped CeO2 nanoparticles

Ni-doped CeO₂ nanoparticles were prepared by using the co-precipitation method. The prepared nanoparticles were characterized using X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, Raman spectroscopy, field emission scanning electron microscopy (FE-SEM) and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. The XRD results infer that Ni-doped CeO₂ nanoparticles have single phase nature similar to that of pure CeO₂ nanoparticles. We have calculated lattice parameters using Powder-X software, particle size using Scherer’s formula and strain using the Williamson-Hall method for all the synthesized samples. We have observed a systematic decrease in the lattice parameters, particle size and strain with an increase in Ni doping in CeO₂. The FE-SEM micrographs also confirm that Ni-doped CeO₂ have nanocrystalline behavior and particles are spherical shaped. From the Raman spectra, it is observed that the intensity of classical CeO₂ vibration modes first increases then decreases with Ni doping. The NEXAFS spectra measured at Ce M_4,5 and Ni L_3,2 edges clearly indicate that Ce ions are in the +4 valence state and Ni ions are in the +2 valence state.     

Field-effect transistor structures on the basis of poly(3-hexylthiophene), fullerene derivatives [60]PCBM, [70]PCBM,and nickel nanoparticles

Organic field-effect transistor (OFET) structures with the active layers on the basis of composite films of semiconductor polymer poly(3-hexylthiophene) (P3HT), fullerene derivatives [60]PCBM, [70]PCBM, and nickel (Ni) nanoparticles are obtained, and their optical, electrical, and photoelectrical properties are studied. It is shown that introducing Ni nanoparticles into P3HT: [60]PCBM and P3HT: [70]PCBM films leads to an increase in the absorption and to quenching of photoluminescence of the composite in the 400–600 nm spectral band due to the plasmon effect. In P3HT: [60]PCBM: Ni and P3HT: [70]PCBM: Ni OFET structures at the P3HT: [60]PCBM and P3HT: [70]PCBM concentrations of ~1: 1 and Ni concentrations of ~3–5 wt %, current–voltage (I–V) characteristics typical of ambipolar OFETs with the dominant hole conduction are observed. The charge-carrier (hole) mobilities calculated from the I–V characteristic at V_G =–10 V were found to be ~0.46 cm²/(V s) for P3HT: [60]PCBM: Ni and ~4.7 cm²/(V s) for P3HT: [70]PCBM: Ni, which means that the mobility increases if [60]PCBM in the composition is replaced with [70]PCBM. The effect of light on the I–V characteristics of P3HT: [60]PCBM: Ni and P3HT: [70]PCBM: Ni OFETs is studied.     

Particle localization and hyperuniformity of polymer‐grafted nanoparticle materials

The properties of materials largely reflect the degree and character of the localization of the molecules comprising them so that the study and characterization of particle localization has central significance in both fundamental science and material design. Soft materials are often comprised of deformable molecules and many of their unique properties derive from the distinct nature of particle localization. We study localization in a model material composed of soft particles, hard nanoparticles with grafted layers of polymers, where the molecular characteristics of the grafted layers allow us to “tune” the softness of their interactions. Soft particles are particular interesting because spatial localization can occur such that density fluctuations on large length scales are suppressed, while the material is disordered at intermediate length scales; such materials are called “disordered hyperuniform”. We use molecular dynamics simulation to study a liquid composed of polymer‐grafted nanoparticles (GNP), which exhibit a reversible self‐assembly into dynamic polymeric GNP structures below a temperature threshold, suggesting a liquid‐gel transition. We calculate a number of spatial and temporal correlations and we find a significant suppression of density fluctuations upon cooling at large length scales, making these materials promising for the practical fabrication of “hyperuniform” materials.     

Estimation of contact area of nanoparticles in chains using continuum elastic contact mechanics

In this research, we have studied the doping behaviors of eight transition metal ion dopants on the crystal phase, particle sizes, XRD patterns, adsorption spectra, anatase fraction, and photoreactivity of TiO₂ nanoparticles. The pristine and ion-doped TiO₂ nanoparticles of 15.91-25.47 nm were prepared using sol–gel method. Test metal ion concentrations ranged from 0.00002 to 0.2 at.%. The absorption spectra of the TiO₂ nanoparticles were characterized using UV-Visible spectrometer. The wavelength of the absorption edge of TiO₂ was estimated using the spectra derivative-tangent method. The photoreactivities of pristine and ion-doped TiO₂ nanoparticles under UV irradiation were quantified by the decoloring rate of methyl orange. XRD patterns were recorded using a Rigaku D/MAX-2500 V diffractometer with Cu Kα radiation (50 kV and 250 mA), and particle size and anatase fraction were calculated. Results reveal that different ion doping exhibited complex effects on the studied characteristics of TiO₂ nanoparticles. In general, red shift occurred to ion-doped TiO₂ nanoparticles, but still with higher TiO₂ photoreactivities when doped with Fe³⁺ and Ni²⁺ ions. Among the ions investigated, Ni-doped TiO₂ nanoparticles have shown highest photoreactivity at the concentration of 0.002 at.%, about 1.9 times that of the pristine TiO₂. Ion doping was shown to reduce the diameter and influence the fraction of anatase. Data also indicated that the combination of anatase diameter and ion radius might play an important role in the photoreactivity of TiO₂ nanoparticles. This investigation contributes to the understanding of complex ion doping effects on TiO₂ nanoparticles, and provides references for enhancing their environmental application.     

Cobalt iron-oxide nanoparticle modified poly(methyl methacrylate) nanodielectrics

In this paper, we report the dielectric properties of composite systems (nanodielectrics) made of small amounts of mono dispersed magnetic nanoparticles embedded in a polymer matrix. It is observed from the transmission electron microscope images that the matrix polymeric material is confined in approximately 100 nm size cages between particle clusters. The particle clusters are composed of separated spherical particles which comprise unconnected networks in the matrix. The dielectric relaxation and breakdown characteristics of the matrix polymeric material are altered with the addition of nanometer size cobalt iron-oxide particles. The dielectric breakdown measurements performed at 77 K showed that these nanodielectrics are potentially useful as an electrical insulation material for cryogenic high voltage applications. Finally, structural and dielectric properties of nanocomposite dielectrics are discussed to present plausible reasons for the observed low effective dielectric permittivity values in the present and similar nanodielectric systems. It is concluded that polymeric nanoparticle composites would have low dielectric permittivity regardless of the permittivity of nanoparticles are when the particles are coordinated with a low dielectric permittivity surfactant.     

Thermomagnetic determination of Fe3O4 magnetic nanoparticle diameters for biomedical applications

The utility and promise of magnetic nanoparticles (MagNPs) for biomedicine rely heavily on accurate determination of the particle diameter attributes. While the average functional size and size distribution of the magnetic nanoparticles directly impact the implementation and optimization of nanobiotechnology applications in which they are employed, the determination of these attributes using electron microscopy techniques can be time-consuming and misrepresentative of the full nanoparticle population. In this work the average particle diameter and distribution of an ensemble of Fe₃O₄ ferrimagnetic nanoparticles are determined solely from temperature-dependent magnetization measurements; the results compare favorably to those obtained from extensive electron microscopy observations. The attributes of a population of biocompatible Fe₃O₄ nanoparticles synthesized by a thermal decomposition method are obtained from quantitative evaluation of a model that incorporates the distribution of superparamagnetic blocking temperatures represented through thermomagnetization data. The average size and size distributions are determined from magnetization data via temperature-dependent zero-field-cooled magnetization. The current work is unique from existing approaches based on magnetic measurement for the characterization of a nanoparticle ensemble as it provides both the average particle size as well as the particle size distribution.     

Optodynamic phenomena in aggregates of polydisperse plasmonic nanoparticles

We propose an optodynamical model of interaction of pulsed laser radiation with aggregates of spherical metallic nanoparticles embedded into host media. The model takes into account polydispersity of particles, pair interactions between the particles, dissipation of absorbed energy, heating and melting of the metallic core of particles and of their polymer adsorption layers, and heat exchange between electron and ion components of the particle material as well as heat exchange with the interparticle medium. Temperature dependence of the electron relaxation constant of the particle material and the effect of this dependence on interaction of nanoparticles with laser radiation are first taken into consideration. We study in detail light-induced processes in the simplest resonant domains of multiparticle aggregates consisting of two particles of an arbitrary size in aqueous medium. Optical interparticle forces are realized due to the light-induced dipole interaction. The dipole moment of each particle is calculated by the coupled dipole method (with correction for the effect of higher multipoles). We determined the role of various interrelated factors leading to photomodification of resonant domains and found an essential difference in the photomodification mechanisms between polydisperse and monodisperse nanostructures.     

Absorption and scattering properties of arbitrarily shaped particles in the Rayleigh domain: A rapid computational method and a theoretical foundation for the statistical approach

We provide a theoretical foundation for the statistical approach for computing the absorption properties of particles in the Rayleigh domain. We present a general method based on the discrete dipole approximation to compute the absorption and scattering properties of particles in the Rayleigh domain. The method allows to separate the geometrical aspects of a particle from its material properties. Doing the computation of the optical properties of a particle once, provides them for any set of refractive indices, wavelengths and orientations. This allows for fast computations of e.g. absorption spectra of arbitrarily shaped particles. Other practical applications of the method are in the interpretation of atmospheric and radar measurements as well as computations of the scattering matrix of small particles as a function of the scattering angle. In the statistical approach, the optical properties of irregularly shaped particles are represented by the average properties of an ensemble of particles with simple shapes. We show that the absorption cross section of an ensemble of arbitrarily shaped particles with arbitrary orientations can always be uniquely represented by the average absorption cross section of an ensemble of spheroidal particles with the same composition and fixed orientation. This proves for the first time that the statistical approach is generally viable in the Rayleigh domain.     

Surface‐enhanced Raman scattering study of Ag@PPy nanoparticles

Surface‐enhanced Raman scattering (SERS) spectra of Ag@polypyrrole (PPy) nanoparticles with both 488 and 1064 nm excitation were investigated. Experimental results as well as theoretical analysis demonstrated that electromagnetic (EM) enhancement and charge transfer (CT) both rebounded to the SERS effect of Ag@PPy nanoparticles. When near‐IR excitation (1064 nm) was used for the SERS measurements, the contribution from CT was amplified relative to that from EM because the energy of the near‐IR excitation is far from the surface plasmon resonance of the nanosized Ag particles. The increased doping level of PPy, leading to optimal energy matching between the Fermi levels of the Ag nanoparticles and the energy levels in PPy molecules, could obviouslyenhance the SERS signal. These results suggested that the SERStechnique wasan effective tool for investigating the doping effect and interface interaction in metal‐conductingpolymer composite nanoparticles. In particular, the SERS technique with near‐IR excitation could give more information regarding the contribution of the charge‐transfer mechanism to the spectral enhancement of this kind of system. Copyright © 2010 John Wiley & Sons, Ltd.     

Analysis of spectra of acoustic signals generated by high-power pulsed laser radiation propagating in the atmosphere. 2. Spectra of acoustic signals from laser sparks

Results of theoretical and experimental investigations into the spectra of acoustic signals generated by high-power pulsed laser radiation propagating in the atmosphere in the breakdown regime are presented. Results of analogous investigations for laser breakdown on a single aerosol particle and ensemble of monodispersed particles versus the particle material and size were published in [1]. In the present work, acoustic spectra of discrete laser sparks in the atmosphere are analyzed, and their special features in comparison with acoustic spectra of individual plasma formations, spectra of acoustic signals generated by pulsed laser radiation propagating in the atmosphere in thermooptical regime, and laboratory spectra of continuous laser sparks are discussed. __________ Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 12, pp. 26–31, December, 2007.     

Wetting-driven structure ordering of a copolymer/homopolymer/nanoparticle mixture in the presence of a modulated potential

We investigate pattern formation on a solid substrate of a diblock copolymer-homopolymer mixture containing doping wettable nanoparticles with a preferential attraction for one component of the copolymers, using a three-order-parameter model. The presence of doping nanoparticles under the surface-interaction modulation breaks the isotropy in the process of microphase-separation and macrophase-separation. This leads to the formation of orientational microphase and macrophase structures due to the interplay between the phase separation and wetting particle ordering under a modulated potential at the late stage. Simulations suggest that the microphase morphology and macrophase morphology can be changed through adjustment of the wetting strength, the amplitude as well as the period of the modulated potential. It provides some important insights for changing microphase and macrophase structures in polymer blends by wetting-driven spinodal decomposition.