Direct laser sintered WC-10Co/Cu nanocomposites

In the present work, the direct metal laser sintering (DMLS) process was used to prepare the WC-Co/Cu nanocomposites in bulk form. The WC reinforcing nanoparticles were added in the form of WC-10 wt.% Co composite powder. The microstructural features and mechanical properties of the laser-sintered sample were characterized by X-ray diffraction (XRD), atomic force microscope (AFM), scanning electron microscope (SEM), energy dispersive X-ray spectroscope (EDX), and nanoindentation tester. It showed that the original nanometric nature of the WC reinforcing particulates was well retained without appreciable grain growth after laser processing. A homogeneous distribution of the WC reinforcing nanoparticles with a coherent particulate/matrix interfacial bonding was obtained in the laser-sintered structure. The 94.3% dense nanocomposites have a dynamic nanohardness of 3.47 GPa and a reduced elastic modulus of 613.42 GPa.     

Anatase type titania nanotube arrays direct fabricated by anodization without annealing

In this paper, anatase type titania nanotube arrays were direct fabricated by anodization in dimethyl sulfoxide electrolyte containing 1 wt% HF solution at above 50 °C without subsequently annealing. The length of the nanotubes decreases with increasing anodization temperature from about approximately 15 μm at 40 °C to approximately 4.5 μm at 60 °C. High resolution transmission electron microscope images and selected area electron diffraction pattern confirm the polycrystalline anatase specimen consisting of many nanocrystals with a random orientation.     

Details of crystalline growth in co-deposited electroplated nickel films with hard (nano)particles

Electroplated nickel dispersion films with incorporated hard particles, primarily titanium oxide, were studied. A sufficient dispersion of nanometre-scaled particles in Watts solution was reached by application of ultrasonic energy to the galvanic bath. Crystal morphology, mean grain size and formation of textures were examined by electron backscattering diffraction (EBSD), X-ray diffraction (XRD) and transmission electron microscopy (TEM). The typical columnar structure of pure Ni films was refined by means of ultrasound. Incorporation of micron-sized TiO₂ particles generates additional nucleation surfaces in contrast to SiC particles. Textures of the subsequent columnar nickel crystals change from 〈2 1 1〉 (silent condition) or 〈1 1 0〉 (ultrasonic condition) fibre textures in growth direction to 〈1 0 0〉 and 〈1 1 1〉 textures under the influence of nanoparticle incorporation. Moreover, nanoparticles remarkably decrease the grain size and grain aspect ratio. Their incorporation takes place inside the crystals as well as between grains.     

Synthesis of LECBD grown cluster assembled SeO2 thin films

Cluster assembled selenium oxide (SeO₂) thin films, as a function of oxygen flow pressure (OFP) have been synthesized by a low energy cluster beam deposition (LECBD) technique. The OFP dependent surface morphology leading to well separated nanoclusters (size ranging from 50 to 200 nm) and fractal features are confirmed from transmission electron microscopic (TEM) measurements. A diffusion limited aggregation (DLA) mediated fractal growth with dimension as 1.71 ± 0.01 has been observed for high OFP (60 mbar). Structural analysis by glancing angle X-ray diffraction (GXRD) and selected area diffraction (SAD) studies identify the presence of tetragonal phase SeO₂ in the deposit. Micro-Raman studies indicate the shifts in bending and stretching vibrational phonon modes in cluster assembled SeO₂ as compared to their bulk counter part due to the phonon confinement effect.     

Comparative study of K0.5Bi0.5TiO3 nanoparticles derived from sol-gel-hydrothermal and sol-gel routes

A kind of novel lead-free ferroelectrics, potassium bismuth titanate, K_0.5Bi_0.5TiO₃ (KBT), has been prepared by sol-gel-hydrothermal and sol-gel routes, respectively, and the structural characters of as-synthesized powders were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The results indicated that sol-gel-hydrothermal route led to the formation of KBT nanowhiskers with diameters of 20 nm and lengths of 1 μm, and the processing temperature was as low as 160 °C, but the normal sol-gel route tended to form KBT cubic particles of about 100-200 nm, and the processing temperature was higher than 700 °C. It is believed that the gel precursor and hydrothermal environment play an important role in the formation of the nanowhiskers at low temperature. Due to the good sinterability of nanowhiskers, the ferroelectric and dielectric properties of KBT ceramics prepared by sol-gel-hydrothermal route were super to that prepared by sol-gel route.     

Low-temperature synthesis and growth of superparamagnetic Zn0.5Ni0.5Fe2O4 nanosized particles

Mono-disperse spinel Ni_0.5Zn_0.5Fe₂O₄ nanosized particles have been synthesized via a hydrothermal method at low temperature. X-ray diffraction (XRD), transmission electron microscope (TEM) and high-resolution transmission electron microscope (HRTEM) analysis indicated that the synthesized nanocrystals were of pure cubic spinel structure with the size about 6-20 nm. The activation energy of grain growth is 35.06 kJ/mol experimented by the Arrhenius equation. A primary experimental model was put forward to shed light on the growth mechanism of crystallined spinel Ni-Zn ferrite nanosized particles under hydrothermal conditions. The magnetic measurements shows that the prepared Ni_0.5Zn_0.5Fe₂O₄ nanoparticle possess good superparamagnetic behavior.     

Pulsed plasma ion source to create Si nanocrystals in SiO2 substrates

A pulsed KrF excimer laser of irradiance of about 10⁸ W/cm² was utilized to synthesize Si nanocrystals on SiO₂/Si substrates. The results were compared with that ones obtained by applying low bias voltage to Si(1 0 0) target in order to control the kinetic energy of plasma ions. Glancing incidence X-ray diffraction spectra indicate the presence of silicon crystalline phases, i.e. (1 1 1) and (2 2 0), on SiO₂/Si substrates. The average Si nanocrystal size was estimated to be about 45 nm by using the Debye-Scherrer formula. Scanning electron microscopy and atomic force microscopy images showed the presence of nanoparticles of different size and shape. Their distribution exhibits a maximum concentration at 49 nm and a fraction of 14% at 15 nm.     

Nanostructured Fe50Ni50 alloy formed by chemical reduction

A high purity Fe₅₀Ni₅₀ nanometric alloy was synthesized by ultra rapid autocatalytic chemical reduction of the corresponding transition metal ions in an aqueous solution. The ratio of metal concentration in solution is preserved in the precipitated powder alloy and no metal segregation has been detected. The alloy was characterized as a nanostructured chemically disordered taenite phase by X-ray diffraction (XRD) and Mössbauer spectroscopy (MS). Transmission electron microscopy (TEM) showed that the as prepared alloy contained spherical particles with 96 nm mean diameter size. The particles are composed of crystallites (of ∼15 nm size) and a predominant disordered interfacial region. A thermal treatment of 673 K/2 h produced a structural relaxation with a significant narrowing in the XRD and Mössbauer lines with a exothermic flow in the DSC signal and an increase in the crystallite size to 30 nm.     

Preparation and characterization of CdS/Si coaxial nanowires

CdS/Si coaxial nanowires were fabricated via a simple one-step thermal evaporation of CdS powder in mass scale. Their crystallinities, general morphologies and detailed microstructures were characterized by using X-ray diffraction, scanning electron microscope, transmission electron microscope and Raman spectra. The CdS core crystallizes in a hexagonal wurtzite structure with lattice constants of a=0.4140 nm and c=0.6719 nm, and the Si shell is amorphous. Five Raman peaks from the CdS core were observed. They are 1LO at 305 cm⁻¹, 2LO at 601 cm⁻¹, A₁-TO at 212 cm⁻¹, E₁-TO at 234 cm⁻¹, and E₂ at 252 cm⁻¹. Photoluminescence measurements show that the nanowires have two emission bands around 510 and 590 nm, which originate from the intrinsic transitions of CdS cores and the amorphous Si shells, respectively.     

Structural,magnetic and electrical properties of Co1−xZnxFe2O4 synthesized by co-precipitation method

Nanoparticles of Co_1−xZn_xFe₂O₄ with stoichiometric proportion (x) varying from 0.0 to 0.6 were prepared by the chemical co-precipitation method. The samples were sintered at 600 °C for 2 h and were characterized by X-ray diffraction (XRD), low field AC magnetic susceptibility, DC electrical resistivity and dielectric constant measurements. From the analysis of XRD patterns, the nanocrystalline ferrite had been obtained at pH=12.5–13 and reaction time of 45 min. The particle size was calculated from the most intense peak (3 1 1) using the Scherrer formula. The size of precipitated particles lies within the range 12–16 nm, obtained at reaction temperature of 70 °C. The Curie temperature was obtained from AC magnetic susceptibility measurements in the range 77–850 K. It is observed that Curie temperature decreases with the increase of Zn concentration. DC electrical resistivity measurements were carried out by two-probe method from 370 to 580 K. Temperature-dependent DC electrical resistivity decreases with increase in temperature ensuring the semiconductor nature of the samples. DC electrical resistivity results are discussed in terms of polaron hopping model. Activation energy calculated from the DC electrical resistivity versus temperature for all the samples ranges from 0.658 to 0.849 eV. The drift mobility increases by increasing temperature due to decrease in DC electrical resisitivity. The dielectric constants are studied as a function of frequency in the range 100 Hz–1 MHz at room temperature. The dielectric constant decreases with increasing frequency for all the samples and follow the Maxwell–Wagner's interfacial polarization.     

Determination of the crystal structure of U6Fe5Al8Si9 by electron crystallography

The crystal structure of U₆Fe₅Al₈Si₉ was re-determined by electron crystallography, using selected area electron diffraction (SAED) and high resolution (HRTEM) images, taken along the [0 0 1] direction. The obtained results are very similar to those found previously by X-ray powder diffraction. The differences between the atomic positions found by SAED and HRTEM images and those found by X-ray powder diffraction were 0.11 and 0.08 Å, respectively.     

Preparation and characterization of C54 TiSi2 nanoislands on Si (1 1 1) by laser deposition of TiO2

We present the preparation of C54 TiSi₂ nanoislands on Si (1 1 1) with a method of the pulsed laser deposition of titanium oxide thin films. The TiO₂ thin films with nominal thicknesses of 1 nm on Si (1 1 1) were annealed at 850 °C for about 4 h in situ. The X-ray diffraction patterns and the X-ray photoelectron spectra indicate that the nanoislands are in C54 TiSi₂ phase. The characterization using a scanning tunneling microscope shows that the nanoislands with triangular, polygonal and rod-like shapes on Si (1 1 1) exhibit the Volmer-Weber growth mode. The sizes of the polygonal islands distribute in two separated ranges. For the small islands, they have a narrow lateral size distribution centered at 4 nm and a height range in 0.6-3.6 nm, while for the large islands, their lateral sizes are in the range of 12-40 nm and the heights in the range of 4-9 nm. The sizes of the well-shaped triangular islands are intermediate with the lateral sizes in range of 5-20 nm and the heights of 2-3.5 nm. The rod-like islands are about 50-200 nm in length, 5 nm in height and about 15-20 nm in width. The origination of the various shapes of the nanoislands is attributed to the symmetry of Si (1 1 1) substrate and the lattice mismatch between the C54 TiSi₂ and the Si (1 1 1) surface.     

Characteristic properties of Y2SiO5:Ce thin films grown with PLD

Three different gases (nitrogen (N₂), oxygen (O₂) and argon (Ar)) were used as background gases during the growth of pulsed laser deposition (PLD) Y₂SiO₅:Ce thin films. A Krypton fluoride laser (KrF), 248 nm was used for the PLD of the films on silicon (Si) (1 0 0) substrates. The effect of the background gases on the surface morphology, crystal growth and luminescent properties were investigated. All the experimental parameters, the gas pressure (455 mT), the substrate temperature (600 °C), the pulse frequency (8 Hz), the number of pulses (4000) and the laser fluence (1.6±0.2) J/cm² were kept constant. The only parameter that was changed during the deposition was the ambient gas species. The surface morphology and average particle sizes were monitored with scanning electron microscopy (SEM) and atomic force microscopy (AFM). X-ray diffraction (XRD) and Auger electron spectroscopy (AES) were used to determine the crystal structure and composition, respectively. Cathodo- (CL) and photoluminescence (PL) were used to measure the luminescent intensities for the different phosphor thin films. The nature of the particles, ablated on the substrate, is related to the collisions between the ejected particles and the ambient gas particles. The CL and PL intensities also depend on the particle sizes. A 144 h (coulomb dose of 1.4×10⁴ C cm⁻²) electron degradation study on the thin films ablated in the Ar gas environment resulted in a decrease in the main CL intensity peak at 440 nm and to the development of a new very broad luminescent peak spectra ranging from 400 to 850 nm due to the growth of a SiO₂ layer on the surface.     

Formation of gold nanoparticles in heat-treated reactive co-sputtered Au-SiO2 thin films

In this work, formation of gold nanoparticles in radio frequency (RF) reactive magnetron co-sputtered Au-SiO₂ thin films post annealed at different temperatures in Ar + H₂ atmosphere has been investigated. Optical, surface topography, chemical state and crystalline properties of the prepared films were analyzed by using UV-visible spectrophotometry, atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS) and X-ray diffractometry (XRD) techniques, respectively. Optical absorption spectrum of the Au-SiO₂ thin films annealed at 800 °C showed one surface plasmon resonance (SPR) absorption peak located at 520 nm relating to gold nanoparticles. According to XPS analysis, it was found that the gold nanoparticles had a tendency to accumulate on surface of the heat-treated films in the metallic state. AFM images showed that the nanoparticles were uniformly distributed on the film surface with grain size of about 30 nm. Using XRD analysis average crystalline size of the Au particles was estimated to about 20 nm.     

Simple recipe to synthesize single-domain BaFe12O19 with high saturation magnetization

We report a new synthesis route for preparation of single-domain barium hexaferrite (BaFe₁₂O₁₉) particles with high saturation magnetization. Nitric acid, known as a good oxidizer, is used as a mixing medium during the synthesis. It is shown that formation of BaFe₁₂O₁₉ phase starts at 800 °C, which is considerably lower than the typical ceramic process and develops with increasing temperature. Both magnetization measurements and scanning electron microscope micrographs reveal that the particles are single domain up to 1000 °C at which the highest coercive field of 3.6 kOe was obtained. The best saturation magnetization of ≈60 emu/g at 1.5 T was achieved by sintering for 2 h at 1200 °C. Annealing at temperatures higher than 1000 °C increased the saturation magnetization, on the other hand, decreased the coercive field which was due to the formation of multi-domain particles with larger grain sizes. It is shown that the best sintering to obtain fine particles of BaFe₁₂O₁₉ occurs at temperatures 900-1000 °C. Finally, magnetic interactions between the hard BaFe₁₂O₁₉ phase and impurity phases were investigated using the Stoner-Wohlfarth model.     

Characterization of Fe and Fe50Ni50 ultrafine nanoparticles synthesized by inert gas-condensation method

Nanoparticles of Fe and Fe₅₀Ni₅₀ were synthesized by inert gas-condensation method under pure helium atmosphere. The prepared nanoparticles samples were examined by high-resolution transmission electron microscopy, X-ray diffraction and Mössbauer spectroscopy. The synthesized nanoparticles consisted of core-shell type structure nearly spherical shape with a size comprised within the range 4-70 nm and they occur as clusters or chains. The Mössbauer measurements as well as X-ray diffraction showed, in both cases, the presence of iron-oxide phases.     

Synthesis and characterization of novel red emitting nanocrystal Gd6WO12:Eu phosphors

Novel nanosized Gd₆WO₁₂:Eu³⁺ phosphors were synthesized via a co-precipitation reaction. The crystal structure and morphology of the phosphors were characterized by using X-ray diffraction (XRD) and field emission scanning electron microscopy (FE-SEM). It was found that the resultant powders show a regular and sphere-like shape with average particle size of 60 nm. Intrinsic red emission originating from Eu³⁺ was observed while excited at the W⁶⁺→O²⁻ and Eu³⁺→O²⁻ charge transfer bands or f-f absorption bands. The color coordinates of the phosphors were calculated to be x=0.625, y=0.375. The concentration dependence of the luminescence was studied, and optimum doping concentration for obtaining maximum emitting intensity was confirmed to be around 12 mol%. It was also found that the electric dipole-dipole interaction plays an important role for quenching luminescence of Eu³⁺.     

Synthesis and magnetic properties of antiferromagnetic Co3O4 nanoparticles

Antiferromagnetic Co₃O₄ nanoparticles with diameter around 30 nm have been synthesized by a solution-based method. The phase identification by the wide-angle X-ray powder diffraction indicates that the Co₃O₄ nanoparticle has a cubic spinel structure with a lattice constant of 0.80843(2) nm. The image of field emission scanning electron microscope shows that the nanoparticles are assembled together to form nanorods. The magnetic properties of Co₃O₄ fine particles have been measured by a superconducting quantum interference device magnetometer. A deviation of the Néel temperature from the bulk is observed, which can be well described by the theory of finite-size scaling. An enhanced coercivity as well as a loop shift are observed in the field-cooled hysteresis loop. The exchange bias field decreases with increasing temperature and diminishes at the Néel temperature. The training effect and the opening of the loop reveal the existence of the spin-glass-like surface spins.     

Synthesis of nanocrystalline Zn0.5Mn0.5Fe2O4 via in situ polymerization technique

Nanocrystalline Zn_0.5Mn_0.5Fe₂O₄ was synthesized through the pyrolysis of polyacrylate salt precursors prepared via in situ polymerization of the metal salts and acrylic acid. The pyrolysis behavior of the polymeric precursors was studied by use of thermal analysis. The as-obtained product was characterized by powder X-ray diffraction (XRD), transmission electron microscope (TEM), electron diffraction (ED) pattern, scanning electron microscopy (SEM) and electron dispersive X-ray (EDX) analysis. The results revealed that the particle size is in the range of 15–25 nm for Zn-Mn ferrites with good crystallinity. Magnetic properties of the sample at 300 K were measured using a vibrating sample magnetometer, which showed that the sample exhibited characteristics of superparamagnetism.     

Preparation and characterization of SnO nanowhiskers

In this paper, some single-crystalline Stannous oxide (SnO) nanowhiskers were successfully prepared by a wet method using SnCl₂·2H₂O as raw material and cetyltrimethylammoniumbromide (CTAB) as surfactant. The morphologies, purity and sizes of the products were characterized by transmission electron microscopy, powder X-ray diffractmetry and standard selected area electron diffraction. The results showed that the diameter and the length of the particles were 10-30 and 200-400 nm, respectively. The influence of some reaction parameters, including the pressure, the temperature, the surfactant and the reaction duration, on the formation, morphology and particle size of SnO crystallite is discussed.