Direct reaction of adsorbed molecular oxygen with hydrazine on a clean Pt(111) surface

The oxidation of hydrazine on the clean Pt(111) surface has been investigated by temperature-programmed reaction spectroscopy (TPRS) in the temperature range 130–800 K. Direct reaction of molecular oxygen is observed on the Pt(111) surface for the first time, as indicated by the desorption of nitrogen beginning at 130 K with a maximum rate at 145 K, below the molecular oxygen dissociation temperature. Direct reaction of hydrazine with adsorbed molecular oxygen results in the formation of water and nitrogen. With excess hydrazine, all surface oxygen is reacted, forming water. When only adsorbed atomic oxygen is present, the low-temperature nitrogen yield decreases by a factor of 3 and the peak nitrogen desorption temperature increases to 170 K. No high-temperature (450–650 K) nitrogen desorption characteristic of nitrogen atom recombination is seen, indicating that during oxidation the nitrogen-nitrogen bond in hydrazine remains intact, as observed previously for hydrazine decomposition on the Pt(111) surface and hydrazine oxidation on rhodium. Two water desorption peaks are observed, characteristic of desorption-limited (175 K) and reaction-limited (200 K) water evolution from the Pt(111) surface. For low coverages of hydrazine, only the reaction-limited water desorption is observed, previously attributed to water formed from adsorbed hydroxyl groups. When excess hydrazine is adsorbed, the usual hydrazine decomposition products, H₂, N₂ and NH₃, are also observed. No nitrogen oxide species (NO, NO₂ and N₂O) were observed in these experiments, even when excess oxygen was available on the surface.     

Theoretical study of CO2 activation on Pt(111) induced by coadsorbed K atoms

The adsorption of CO₂ on the clean and potassium-precovered Pt(111) surface has been studied by means of the cluster model approach within the hybrid B3LYP density functional theory-based method. On the clean surface, CO₂ is undistorted and weakly bound. The equilibrium position of this physisorbed species appears at a rather large distance from the surface. However, when coadsorbed K atoms are included in the model, a chemisorbed, bent CO₂ species on top of a surface Pt atom is found. The presence of the coadsorbed K is found to be necessary to promote CO₂ chemisorption and activation, the key step in activating the CO₂ molecule being a direct interaction with the coadsorbate. In addition, the calculated vibrational frequencies for this chemisorbed species are in agreement with available experimental data.     

测定核间距的不对称2D NOESY方法2.Cis-Pt(NH3)2(Guo)2Cl2的不对称2D NOESY实验研究

应用不对称2DNOESHY实验方法研究了顺铂配合物Cis-Pt (NH₃)₂(Guo)₂Cl₂的水溶液中的构象,表明鸟苷同铂配合后其糖环构象发生明显的变化。     

Effects of preadsorbed oxygen on the formation and decomposition of NCO on Rh(111) surfaces

The interaction of HNCO with oxygen dosed Rh(111) surface has been investigated by Auger electron, electron energy loss and thermal desorption spectroscopy. The presence of adsorbed oxygen exerted no apparent influence on the weakly adsorbed HNCO (T_p = 130 K). It promoted, however, the dissociative adsorption of HNCO by forming a strong O—H bond which prevented the associative desorption of HNCO. As a result no H₂ and NH₃ formation occurred, in contrast with the clean surface, and the surface concentration of irreversibly bonded NCO was also increased. New products of the surface reaction were H₂O and CO₂, in addition to CO and N₂ observed on a clean surface. From the behavior of the losses characteristic for the adsorbed NCO it appeared that the preadsorbed oxygen exerted a significant stabilizing effect on the NCO bonded to the Rh.     

Studies of sol–gel TiO2 and Pt/TiO2 catalysts for NO reduction by CO in an oxygen-rich condition

The textural properties, morphological features, surface basicity and oxygen reduction behaviours of titania and Pt supported titania catalysts synthesized via a sol–gel method were studied by means of N₂ physisorption, SEM, TEM, CO₂-TPD and H₂-TPR techniques. Mesostructured TiO₂ shows a very narrow pore size distribution that uniformly centred at about 4 nm. High resolution TEM images confirmed that most of Pt particles on Pt/TiO₂-SG had a size smaller than 2 nm. Both the titania support and Pt loaded catalysts chiefly contained weak basic sites with small amount of strong basic sites. Loading Pt did not significantly alter the surface reduction characters of titania, indicating a weak interaction between Pt metals and titania support. Catalytic evaluation revealed that the selectivity of NO reduction over titania was insensitive to variation of textural property. On the bare titania, low NO conversion but high selectivity to N₂O was obtained. However, the Pt/TiO₂-SG catalysts exhibited high NO conversion and high selectivity to N₂, which is assumed to relate to NO dissociation catalysed by the metallic Pt clusters. In addition, when the reaction temperature was above 200 °C, 3–11% NO₂ was yielded over the Pt/TiO₂-SG catalysts, which was discussed on a basis of reaction competition, metal-support interaction and NO dissociation.     

IR spectroscopy of adsorbed dinitrogen: a sensitive probe of defect sites on Pt(111)

Fourier transform infrared reflection absorption spectroscopy (FT-IRAS) has been used to probe the non-dissociative adsorption of N₂ on an atomically clean Pt(111) single crystal. In contradiction to a previous IRAS study of nitrogen adsorption on a Pt(111) foil at 120 K, no nitrogen infrared (IR) band was observed on a fully annealed Pt(111) surface at 90 K. Following Ar⁺ ion bombardment, adsorption of nitrogen at 90 K produces an intense IR band at 2222 cm⁻¹ attributed to the N---N stretching mode of molecular nitrogen adsorbed on defect sites produced by ion bombardment. Annealing the Ar⁺ ion sputtered surface to a temperature above 750 K completely suppresses the adsorption of nitrogen at 90 K. Based on these and other results, we postulate that nitrogen adsorbs at 90 K mainly on monovacancies on platinum. We suggest that this specific adsorption occurs by sigma donation from nitrogen to the base of monovacancy sites which possess a low d-electron density compared to surface Pt atoms.     

表面预处理对石墨烯上范德瓦耳斯外延生长GaN材料的影响

基于范德瓦耳斯外延生长的氮化镓/石墨烯材料异质生长界面仅靠较弱的范德瓦耳斯力束缚,具有低位错、易剥离等优势,近年来引起了人们的广泛关注.采用NH_3/H_2混合气体对石墨烯表面进行预处理,研究了不同NH_3/H_2比对石墨烯表面形貌、拉曼散射的影响,探讨了石墨烯在NH_3和H_2混合气氛下的表面预处理机制,最后在石墨烯上外延生长了1.6μm厚的GaN薄膜材料.实验结果表明:石墨烯中褶皱处的C原子更容易与气体发生刻蚀反应,刻蚀方向沿着褶皱进行;适当NH_3/H_2比的混合气体对石墨烯进行表面预处理可有效改善石墨烯上GaN材料的晶体质量.本研究提供了一种可有效提高GaN晶体质量的石墨烯表面预处理方法,可为进一步研究二维材料上高质量的GaN外延生长提供参考.     

A LEED, TPD and HREELS investigation of NO adsorption on Sn/Pt(111) surface alloys

The adsorption of NO on Pt(111), and the (2 × 2)Sn/Pt(111) and (√3 × √3)R30°Sn/Pt(111) surface alloys has been studied using LEED, TPD and HREELS. NO adsorption produces a (2 × 2) LEED pattern on Pt(111) and a (2√3 × 2√3)R30° LEED pattern on the (2 × 2)Sn/Pt(111) surface. The initial sticking coefficient of NO on the (2 × 2)Sn/Pt(111) surface alloy at 100 K is the same as that on Pt(111), S₀ = 0.9, while the initial sticking coefficient of NO on the (√3 × √3)R30°Sn/Pt(111) surface decreases to 0.6. The presence of Sn in the surface layer of Pt(111) strongly reduces the binding energy of NO in contrast to the minor effect it has on CO. The binding energy of β-state NO is reduced by 8–10 kcal/mol on the Sn/Pt(111) surface alloys compared to Pt(111). HREELS data for saturation NO coverage on both surface alloys show two vibrational frequencies at 285 and 478 cm⁻¹ in the low frequency range and only one N-O stretching frequency at 1698 cm⁻¹. We assign this NO species as atop, bent-bonded NO. At small NO coverage, a species with a loss at 1455 cm⁻¹ was also observed on the (2 × 2)Sn/ Pt(111) surface alloy, similar to that observed on the Pt(111) surface. However, the atop, bent-bonded NO is the only species observed on the (√3 × √3)R30°Sn/Pt(111) surface alloy at any NO coverage studied.     

FTIR spectroscopic characterization of the adsorption and desorption of ammonia on MgO surfaces

In the present paper an attempt is made to disentangle the complex IR spectra obtained in the course of the adsorption of NH₃ on high surface area MgO. For this purpose two simplifications were introduced in comparison to previous studies: (a) Only uniformly hydroxylated MgO surfaces (degassing temperature: 200 °C) and completely dehydroxylated MgO surfaces (degassing temperature: 1000 °C) were used as adsorbent, (b) The equilibrium pressure of the adsorbate NH₃ was generally maintained below 200 Pa in all adsorption and desorption experiments. Under these conditions the position and the pressure dependence of the resulting bands may consistently be interpreted in terms of characteristic surface species. Only the completely dehydroxylated MgO surface gives rise to a heterolytic dissociation into neighbouring NH₂ and OH groups. In addition, NH₃ is physically adsorbed on less reactive sites via diverse types of hydrogen bonds. Less well defined hydroxylation states give rise to considerably more complicated spectra. In a first approximation they may be constructed by linearly combining two spectral patterns, one related to a uniformly hydroxylated and the other to a dehydroxylated surface. NH₃ pressures around and beyond 1 kPa give rise to significant changes of band positions and band shapes compared to those observed below 200 Pa. The interpretation of these effects which have previously been ignored must necessarily rely on more complicated models.     

Adsorption of potassium on a Si(111) surface

The adsorption of potassium on several sites (T₁, T₄, H₃) of a Si(111) surface is studied using the extended Hückel method and cluster models. The results show that the chemisorption energy on the T₄ site is almost equal to that on the H₃ site for an ideal surface. However, the analysis of chemical bonding of adatoms on a Si surface suggests that the chemisorption of adatoms might induce a kind of reconstruction on the Si(111) surface. Rough calculations for the adsorption on this reconstructed surface are carried out. In this paper, charge transfer, density of states and characterization of the bonds between the adatom and substrate Si atoms are also investigated in detail.     

Calculation of normal frequencies of adsorbed molecules by the LCGTO-MCP-LSD method

Density functional calculations have been performed to determine the equilibrium geometry and normal frequencies of the Pd₃(CCH₃) cluster (ethylidyne on Pd₃). We find promising agreement between the theoretically obtained frequencies and those of experimental studies for CCH₃ on the Pd(111) surface. The effect of the metal cluster relaxation on the calculated equilibrium geometry and normal frequencies is examined.     

蓝宝石R面上ZnO薄膜的NH3掺杂研究

以NH₃为掺杂源,利用金属有机化学气相沉积(MOCVD)系统在蓝宝石R面上生长出掺氮ZnO薄膜。通过XRD,SEM测量优化了其生长参数,在610℃和在80sccm的NH₃流量下生长出了〈1120〉单一取向的ZnO薄膜。经Hall电阻率测量,得知该薄膜呈现弱p型或高电阻率,并对其光电子能谱进行了研究。     

Scanning tunneling microscopy of N2H4 on silicon surfaces

The chemistry of N₂H₄ on Si(100)2 × 1 and Si(111)7 × 7 has been studied using scanning tunneling microscopy. At low coverages on Si(100)2 × 1 at room temperature the adsorption sites are distributed randomly on the surface and are imaged as dark spots in the dimer row by the STM. Upon annealing the substrate at 600 K, both isolated reaction products, as well as clusters of reaction products are formed on the surface. The STM images show that the majority of the isolated reaction products are adsorbed symmetrically across the dimers. Based on previous HREELS data, these are most likely NH_x groups. However, the clusters are not well resolved. Because of this we speculate that they are not simply symmetrically adsorbed NH_x groups, but likely have a more complicated internal structure. At higher coverages, the STM images show that the predominant pathway for adsorption is with the N---N bond parallel to the surface, in agreement with HREELS studies of this system. On Si(111)7 × 7, the molecule behaves in a manner which is similar to NH₃. That is, at low coverages the molecule adsorbs preferentially at center adatoms due to the greater reactivity of these sites, while at higher coverages it also reacts with the corner adatoms.     

Structure and reactivity of bimetallic electrochemical interfaces: infrared spectroscopic studies of carbon monoxide adsorption and formic acid electrooxidation on antimony-modified Pt(100) and Pt(111)

The influence of predosed antimony on the adlayer structures of carbon monoxide and on the electro-oxidation kinetics of formic acid on Pt(100) and Pt(111) in 0.1M HClO₄ is examined by means of in-situ infrared spectroscopy in conjunction with cyclic voltammetry. Preadsorbed antimony inhibits the adsorption of CO on these surfaces, the attenuation in CO coverage being accompanied by a selective removal of the two-fold bridging geometry as deduced from the relative ν_CO band intensities. At saturation antimony coverages, the CO binding is exclusively terminal on Pt(100) and Pt(111). These findings are consistent with the adsorption of antimony at multi-fold sites, yielding microscopically intermixed adlayers with CO. The electro-oxidation rates of formic acid are enhanced substantially by preadsorbed antimony on Pt(100) and Pt(111). The real-time infrared spectra in the C-O stretching region and the CO coverages thereby deduced in the presence of predosed antimony under reactive voltammetric conditions suggest that the metal adatoms are actively involved in the dissociation of formic acid. The origins of the enhanced electrocatalytic activity of the bimetallic Sb/Pt surfaces are discussed in terms of geometric and chemical effects.     

Surface interaction between H2 and CO2 over silicalite-supported platinum

Infrared spectroscopic evidence is presented for the formation of linearly bonded CO species, as a result of surface interaction between H₂ and CO₂ at room temperature over silicalite-supported Pt. Comparison with direct CO adsorption results suggests that the active sites for this CO₂ reaction are the corner or step sites on platinum particles. The CO formed on these active sites then migrates to other sites on the surface of Pt particles. Co-adsorbed hydrogen and water make the linearly bonded CO species more strongly adsorbed on Pt particles. However, exposure to oxygen or air at room temperature effectively removes these CO species.     

Quantum-resolved angular distributions of neutral products in electron-stimulated processes: NO desorption from and NO2 dissociation on Pt(111)

We present the first quantum-resolved angular distributions of ground-state neutral molecules which are products of electron stimulated desorption (ESD) and electron stimulated dissociation. Laser resonance-enhanced multiphoton ionization (REMPI) and two-dimensional imaging have been used to obtain angular distributions of NO desorbed by 350 eV electrons from O-precovered Pt(111). In a similar fashion, we have measured angular distributions for the NO product of NO₂ dissociation on clean and O-precovered Pt(111). In all cases, we observe narrow widths which are roughly the same as ion distributions determined by ESDIAD (ESD ion angular distributions). The angular distribution for NO ESD is sharply peaked (7° half-width at half maximum) along the surface normal for an O coverage (θ_o) of 0.25 monolayer (ML). The angular distribution of the NO product from dissociation of side-bonded NO₂ on clean Pt(111) is unexpectedly peaked about the surface normal, and thus does not reflect dissociative forces parallel to the surface or the 25° off-normal ground-state bond direction. On O-precovered Pt(111), where NO₂ is N-bonded, 6° off-normal beams are observed. When the substrate is precovered with θ_o > 0.5 ML, local disorder creates asymmetric site geometries which result in multiple peaked angular distributions with both normal and off-normal (9–10°) components; similar effects for NO ESD are observed. In all these studies, the NO angular distributions are invariant to rotational or vibrational state. This implies that the lateral translational degrees of freedom are essentially de-coupled from the internal modes of the molecule. The results are discussed in terms of desorption mechanisms, dissociative forces, site geometries, and disordered coadsorbate layers.     

水溶液中N-烷基亚胺二乙酸二氨铂(Ⅱ)配合物的13C NMR研究

在不同pH条件下以N-烷基亚胺二乙酸[R-N (CH₂COOH)₂,R=Me,i-Pr,n-Pr,HO-Et]为配体合成了一系列二氨铂(Ⅱ)类配合物.¹³C NMR (20MHz)研究结果表明该类配体均以N、O与铂配位,配位方式不随合成时pH值的改变而改变,在弱酸条件下,配合物处于交换平衡状态,平衡常数由不同pH下未配位羧基碳的化学位移计算而得.     

Synthesis,Spectroscopic Characterization,Thermogravimetric and Biological Activity Evaluation of Te(Ⅳ),Se(Ⅳ),V(Ⅲ),Nb(Ⅴ),Ta(Ⅴ)Complexes With Indole-3-Acetic Acid Plant Hormone Ligand

Te(Ⅳ), Se(Ⅳ), V(Ⅲ), Nb(Ⅴ) and Ta(Ⅴ) complexes of indole-3-acetic acid (IAAH) ligand were synthesized, characterized by elemental analysis and various spectroscopic techniques like, IR, 1H-NMR, X-ray powder diffraction, UV-Visible, thermogravimetry analysis, magnetic measurements, molar conductance and surface morphology using SEM. All the synthesized complexes of IAAH ligand have 1∶2 stoichiometry of the types [Te(IAA)₂(NH₃)₂]·2Cl (Ⅰ), [Se(IAA)₂(NH₃)₂]·2Cl (Ⅱ), [V(IAA)₂(NH₃)(Cl)] (Ⅲ), [Nb(IAA)₂(Cl)₃] (Ⅳ), and [Ta(IAA)₂(Cl)₃] (Ⅴ). Spectral analysis indicates octahedral geometry for the Te(Ⅳ), Se(Ⅳ) and V(Ⅲ) complexes, whereas both Nb(Ⅴ) and Ta(Ⅴ) have a seven-coordination. The bonding sites are the oxygen atoms of carboxylate group for the deprotonated indole-3-acetic acid (IAA) ligand. The thermogravimetry analysis studies gave evidence for the presence of other coordinated molecules (Cl or NH₃) in the composition of IAA complexes, which were further supported by IR and micro analytical measurements. The higher molar conductance data of tellurium and selenium (Ⅳ) complexes reveal that these chelates are electrolytes, while low conductivity values for the vanadium(Ⅲ), niobium and tantalum(Ⅴ) chelates indicated a non-electrolytes. To test the antibacterial property of the five complexes in this study, four bacterial strains Klebsiella (G-), Escherichia coli (G-), Staphylococcus aureus (G+) and Staphylococcus epidermidis (G+) were used in the investigation. The effects of the five complexes in the cytotoxicity of Caco-2 and Mcf-7 human cancer cell lines were studied Neutral red uptake assay for the estimation of cell viability/cytotoxicity protocol.     

NH4H2PO4和ND4D2PO4晶体微结构的拉曼光谱研究

本文利用偏振拉曼光谱和第一性原理, 对磷酸二氢铵(NH₄H₂PO₄, ADP)和不同氘含量磷酸二氢铵DADP晶体的晶格振动模式进行了研究. 实验测得了不同几何配置、200–4000 cm^-1范围的偏振拉曼光谱, 分析在不同氘含量条件下921 cm^-1和3000 cm^-1附近拉曼峰的变化. 在ADP晶体中, 基于基本结构单元NH₄⁺ 和H₂PO₄^-基团的振动模, 用第一性原理进行了数值模拟, 进一步明确拉曼峰与晶体中原子振动的对应关系; 通过洛伦兹拟合不同氘含量DADP晶体的拉曼光谱中2000–2600 cm^-1处各峰的变化讨论了DADP 晶体的氘化过程, 结果表明氘化顺序是先NH₄⁺ 基团后H₂PO₄^-基团, 研究结果为今后此类材料的生长和性能优化奠定了基础.     

Characterization and chemical behavior of submonolayer coverages of titania on a Pt foil

The interaction between submonolayer titania coverages and Pt foil has been studied by Auger electron spectroscopy (AES), X-ray photoelectron spectroscopy (XPS), temperature programmed desorption (TPD) and high-resolution electron energy loss spectroscopy (HREELS). The submonolayer titania can be fully oxidized to TiO₂ at 923 K under 10⁻⁸ Torr O₂, and partially oxidized to TiO_x at lower oxidation temperatures. The oxidized surface can be reduced by annealing to 1000 K or higher, or by heating in H₂ at 823 K, or by interacting with surface carbon formed from acetone decomposition. Under certain conditions (e.g., hydrogen reduction at 923 K), the surface titania can be fully reduced to metallic Ti which diffuses into bulk Pt readily. The reduced metallic Ti can resurface when the surface is oxidized at 923 K. Both XPS and HREELS data indicate the existence of subsurface oxygen, which plays an important role for the diffusion of Ti into and out of the Pt foil. Although no special interfacial active sites were revealed by HREELS studies of adsorbed acetone and CO, some TPD and XPS data suggest the presence of sites active for acetone decomposition.