Shrinking Behavior of Surfactant‐Grafted Thermosensitive Gels and the Mechanism of Rapid Shrinking

Surfactant‐grafted hydrogels with a fast response to temperature were prepared. In order to clarify the mechanism of rapid shrinking, the effects of the grafted surfactant and the homogeneity of the main chain were investigated. Poly(NIPAAm‐co‐S180A) gels prepared using a chemical cross‐linker (bis‐PNS gels) exhibited rapid shrinking, as did PNS gels prepared by γ‐ray irradiation (γ‐PNS gels). This suggested that the rapid shrinking of the PNS gel did not depend on the homogeneity of the main‐chain structure. The shrinking kinetics of the bis‐PNS gels depended on the amount of the introduced surfactant, which means that shrinking is enhanced by micelle formation as a dynamic driving force. From the analysis by dynamic light scattering (DLS) and scanning microscopic light scattering (SMILS), it was suggested that the micelle structure, which induced rapid shrinking, existed in the bis‐PNS gel.

     

Intelligent gels and cryogels with entrapped emulsions

Smart thermoresponsive gels and cryogels with incorporated emulsions have been synthesized and studied. The gels were obtained by three-dimensional copolymerization of N-isopropylacrylamide and N,N'-methylene-bis-acrylamide or N,N'-bis(acryloyl)cystamine in the presence of dispersion of tetradecane stabilized with sodium dodecylsulfate. Polymerization was performed at room temperature and below the water crystallization temperature. Both composite gels and cryogels were capable of heat-induced collapse. The extent of the collapse of the composite gel prepared at room temperature was much smaller and without squeezing of the lipophilic phase out of the shrunk composite gel. In contrast, shrinking of the composite cryogel was accompanied by release of tetradecane emulsion.     

聚(醚-酐)凝胶性能的优化及用于包载难溶性药物的研究

在制备聚醚酐凝胶的基础上, 用两种不同的可光交联疏水性单体与聚醚酐大分子单体在紫外光引发下制备三维交联凝胶, 使得凝胶的溶胀性能和亲-疏水性能发生变化, 从而影响凝胶与难溶性药物的相容性; 选用吲哚美辛为模型药物, 通过后包合法将其包载于凝胶网络中, X射线衍射(XRD)检测结果表明, 药物能以分子或无定形态分散于其中, 优化后的凝胶可得到更高的载药量和包封率, 能有效地提高疏水性药物的溶出度, 且药物体外释放速率与单纯聚醚酐凝胶相比, 被有效延缓, 更适于临床应用.     

Swelling–shrinking behaviors of poly(N-isopropylacrylamide) and poly(N-n-propylacrylamide) gels prepared by chemical and radiation crosslinking methods

The swelling and shrinking kinetics of thermosensitive gels based on N-isopropylacrylamide (NiPAAm) and N-n-propylacrylamide (NnPAAm) were studied. Four gels cylindrical in shape were prepared by two different methods: γ-ray irradiation to aqueous solutions of poly(NiPAAm) (PNiPAAm) or poly(NnPAAm) (PNnPAAm) and redox polymerization of NiPAAm or NnPAAm monomer using N,N′-methylenebisacrylamide as a crosslinker. There were a few differences in the swelling kinetics among these gels. However, a marked difference was observed in the shrinking processes, the rate of which was faster in the order of radiation-crosslinked PNiPAAm gel > radiation-crosslinked PNnPAAm gel > chemically crosslinked PNnPAAm gel > chemically crosslinked PNiPAAm gel. This difference was discussed in terms of the microscopic structure of the gels, which was studied by light scattering techniques. It was found that the static inhomogeneities frozen in the chemically and radiation-crosslinked gels play a key role in their shrinking kinetics.     

Preparation of fast response superabsorbent hydrogels by radiation polymerization and crosslinking of N-isopropylacrylamide in solution

Macroporous temperature-responsive poly(N-isopropylacrylamide) (PNIPAAm) hydrogels with high equilibrium swelling and fast response rates were obtained by a ⁶⁰Co γ- and electron beam (EB) irradiation of aqueous N-isopropylacrylamide (NIPAAm) monomer solutions. The effect of irradiation temperatures, the dose, the addition of a pore-forming agent on the swelling ratio, and the kinetics of swelling and shrinking of the PNIPAAm gels was studied. The gels synthesized above the LCST exhibited the highest equilibrium swelling (300–400) and fastest response rate measured by minutes. Scanning electron microscope (SEM) pictures revealed that the gels synthesized above the LCST have larger pores than those prepared at temperatures below the LCST. The gels showed a reversible response to cyclical changes in temperature and might be used in a pulsed drug delivery device. The gels synthesized above the LCST exhibited the highest testosterone propionate release.     

The influence of cold treatment on properties of temperature-sensitive poly(N-isopropylacrylamide) hydrogels

Poly(N-isopropylacrylamide) (PNIPAAm) hydrogel exhibits a response to external temperature variation and shrinks in volume abruptly as the temperature is increased above its lower critical solution temperature. It has great potential applications in biomedical fields. A rapid response rate is essential, especially when this material is designed as an on-off switch for targeted drug delivery. However, due to the appearance of a thick, dense skin layer on the hydrogel surface during the shrinking process, the deswelling rate of conventional PNIPAAm gels is low. In this article, a novel method is proposed to modify the surface morphology of PNIPAAm gel, in which the swollen gels are frozen at low temperature (-20 degrees C). The scanning electron micrographs revealed that a fishnet-like skin layer appeared on the surfaces of the cold-treated gels. Dramatically rapid deswelling was achieved with the cold-treated gels since the fishnet-like structure with numerous small pores prevented the formation of a dense, thick skin layer during the deswelling process, which commonly occurs in normal PNIPAAm hydrogels. Prolonging the cold treatment from 1 day to 10 days resulted in a slightly higher deswelling rate. Rearrangement of the hydrogel matrix structure during the freezing process might contribute to the formation of the fishnet-like skin layer. The water uptake of the hydrogels increased nearly in proportion to the square root of time, indicating that the reswelling rate of hydrogels was controlled predominantly by water diffusion into the network. However, there were no significant differences in the equilibrated swelling ratio and reswelling kinetics at room temperature (22 degrees C) between normal gels and cold-treated gels, which implied that cold treatment did not change bulk porosity and gel tortuosity much.     

A plasmon-enhanced theranostic nanoplatform for synergistic chemo-phototherapy of hypoxic tumors in the NIR-II window

Development of simple and effective synergistic therapy by combination of different therapeutic modalities within one single nanostructure is of great importance for cancer treatment. In this study, by integrating the anticancer drug DOX and plasmonic bimetal heterostructures into zeolitic imidazolate framework-8 (ZIF-8), a stimuli-responsive multifunctional nanoplatform, DOX-Pt-tipped Au@ZIF-8, has been successfully fabricated. Pt nanocrystals with catalase-like activity were selectively grown on the ends of the Au nanorods to form Pt-tipped Au NR heterostructures. Under single 1064 nm laser irradiation, compared with Au NRs and Pt-covered Au NRs, the Pt-tipped Au nanorods exhibit outstanding photothermal and photodynamic properties owing to more efficient plasmon-induced electron–hole separation. The heat generated by laser irradiation can enhance the catalytic activity of Pt and improve the O₂ level to relieve tumor hypoxia. Meanwhile, the strong absorption in the NIR-II region and high-Z elements (Au, Pt) of the DOX-Pt-tipped Au@ZIF-8 provide the possibility for photothermal (PT) and computed tomography (CT) imaging. Both in vitro and in vivo experimental results illustrated that the DOX-Pt-tipped Au@ZIF-8 exhibits remarkably synergistic plasmon-enhanced chemo-phototherapy (PTT/PDT) and successfully inhibited tumor growth. Taken together, this work contributes to designing a rational theranostic nanoplatform for PT/CT imaging-guided synergistic chemo-phototherapy under single laser activation.

A plasmon-enhanced theranostic nanoplatform for synergistic chemo-phototherapy (PTT/PDT) of hypoxic tumors in the NIR-II window.     

Microporous, fast response cellulose ether hydrogel prepared by freeze-drying

A simple and effective method of preparing fast-response gels is developed. The freeze-drying and subsequent rehydration of thermosensitive gels alters the microstructural properties of the gels in a way that leads to rapid shrinking rates. Microporous hydroxypropyl cellulose (HPC) gels were created by this method to investigate the influence of the process on the swelling and shrinking kinetics of the gels in response to temperature changes. Micropores of different size ranges were produced by freezing gels with different amounts of water at −20 °C. Water content was the key factor to control the microporosity and the shrinking rates of gels. After the freezing treatment, an effective diffusion coefficient for shrinking could be determined by fitting Fick's law to the data (5.2 × 10⁻⁴ cm²/s). This was an increase of two orders of magnitude over that of the untreated, non-porous gel (6.0 × 10⁻⁶ cm²/s). The magnitude of the shrinking coefficient indicates that the shrinking rate of the microporous gel is probably limited by the convective flow, as unsteady flow through porous media follows the same differential equation as Fick's law, but with much greater transport coefficients, as observed here. Physically, the shrinking rate may be determined by the level of interconnected-cells in a microporous structure present at the beginning of shrinking process because the convection through the interconnected-cells is estimated to be much slower than the polymer network diffusion rate of the struts of micropores (0.1–3.0 μm) as well as heat transfer.     

Synthesis of biocompatible nanocomposite hydrogels as a local drug delivery system

Nanocomposite biocompatible hydrogels (NCHG) were synthesised as model systems for in situ cured potentially local drug delivery devices for curing periodontal infections. The composite consists of the following components: nanoparticles (NPs), matrix gel, and chlorhexidine (CHX) as antibacterial drug. The NPs were obtained by free radical initiated copolymerization of the monomers, 2-hydroxyethyl methacrylate (HEMA) and polyethyleneglycol dimethacrylate (PEGDMA), in aqueous solution. The same monomers were used to prepare crosslinked matrices by photopolymerization. NCHGs were obtained by mixing NPs, monomers, and drug in an aqueous solution then crosslinked by photopolymerization. Mechanical properties, swelling behavior, and the kinetics of drug release have been investigated. It was found that compression strength values increased with increasing ratio of the crosslinker PEGDMA. Incorporation of NPs into the matrix resulted similar compression strength as the matrix hydrogel. The hydrated NCHGs swelled more slowly but admitted more water. The drug was incorporated in NPs by swelling in CHX aqueous solution or added to the solution of monomer mixture followed by photopolymerization. Studies of release kinetics revealed that on average 60% of the loaded drug was released. The most rapid release was observed over a 24 h period for matrix gels with low crosslinking density. For NCHGs, the release period exceeded 48 h. An unexpected result was observed for NCHGs without drug in the NPs. In this case, increasing release was observed for the first 24 h. Thereafter, however, the apparent quantity of detectable drug decreased dramatically.     

Remotely triggered liposome release by near-infrared light absorption via hollow gold nanoshells

An elusive goal for systemic drug delivery is to provide both spatial and temporal control of drug release. Liposomes have been evaluated as drug delivery vehicles for decades, but their clinical significance has been limited by slow release or poor availability of the encapsulated drug. Here we show that near-complete liposome release can be initiated within seconds by irradiating hollow gold nanoshells (HGNs) with a near-infrared (NIR) pulsed laser. Our findings reveal that different coupling methods such as having the HGNs tethered to, encapsulated within, or suspended freely outside the liposomes, all triggered liposome release but with different levels of efficiency. For the underlying content release mechanism, our experiments suggest that the microbubble formation and collapse due to the rapid temperature increase of the HGN is responsible for liposome disruption, as evidenced by the formation of solid gold particles after the NIR irradiation and the coincidence of a laser power threshold for both triggered release and pressure fluctuations in the solution associated with cavitation. These effects are similar to those induced by ultrasound and our approach is conceptually analogous to the use of optically triggered nano-"sonicators" deep inside the body for drug delivery. We expect HGNs can be coupled with any nanocarriers to promote spatially and temporally controlled drug release. In addition, the capability of external HGNs to permeabilize lipid membranes can facilitate the cellular uptake of macromolecules including proteins and DNA and allow for promising applications in gene therapy.     

Surface microstructure formation by ps‐ and fs‐laser ablation of an elastomer composite

We investigated the laser ablation of an elastomer composite with picosecond‐ (ps‐) and femtosecond‐ (fs‐) pulsed UV lasers (ps‐laser: λ = 263 nm, τ = 8 ps; fs‐laser: λ = 248 nm, τ = 500 fs). Upon laser irradiation, a unique microstructure on the surface of the elastomer composite (acrylate polymer) containing carbon black (particle size: 18–30 nm) was observed. The laser‐ablated surfaces were analyzed by scanning electron microscopy (SEM) and X‐ray photoelectron spectroscopy (XPS). The formation mechanism is discussed in terms of thermal effects induced by the different pulse durations of the lasers.     

Microporous,Thermosensitive Organic-Inorganic Hybrid Hydrogel Prepared by Freezing

Thermally triggered shrinking rates of poly(N-isopropyl-acrylamide) (PNIPA) -based organic-inorganic hydrogel could be accelerated by applying the ice templating method. Freezing and subsequent rehydration of gels is an effective way to prepare the porous polymer network that leads to rapid expelling of pore water. The shrinking coefficients obtained by fitting Fick's law to the data increased two orders of magnitude as compared with the conventional gel before freezing. The microstructure of gels generated during freezing gels had advantage to expel the pore water rapidly probably due to the PNIPA aggregation through the hydrophobic interaction.     

Orientation transition of nanorods induced by polymer brushes

Coarse-grained molecular dynamics simulations are used to explore the spatial orientations and conformational transitions of nanorods (NRs) within semiflexible polymer brushes. The orientations of the NR clusters are controlled by the competition between the entropy cost for NRs infiltrated into the polymer brushes and the attractive energy between NRs and polymer brushes. By reducing the grafting density or enhancing the number of NRs, the NR cluster experiences an orientation transition from the vertical direction to the horizontal direction. The semiflexible polymer brushes are regarded as the soft confinements for the NRs, and the soft confinements can induce the formation of the NR aggregation under the effect of the depletion attractions. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

Composite Hydrogels for Sustained Release of Therapeutic Agents

The goal of this research is to develop a composite hydrogel system for sustained release of therapeutic agents. The hydrogel composites were prepared by embedding drug‐loaded, biodegradable poly (DL‐lactide‐co‐glycolide) (PLGA) microparticles in semicrystalline hydrogels of polyvinyl alcohol (PVA). The gels were physically cross‐linked by the formation of the crystallites. The presence of the crystallites and the composite nature of the structure were confirmed by using differential scanning calorimetry and ATR‐FTIR spectroscopy. The distribution of microparticles in the hydrogel matrix was evaluated by using confocal laser scanning microscopy with coumarin‐6 as a fluorescence marker. The numbers of particles in the hydrogel matrix increased along the scanning depth, indicating uneven distribution. The release behavior of a model therapeutic agent, hydrocortisone, was evaluated, and the hydrogel composite system provided for better control of release than the microparticles and hydrogels alone. The addition of outer layers of PVA to the original single‐layer composite further reduced the initial burst effect from the microparticles and allowed for a linear release profile for greater than 1 month.     

Enhanced Photocatalytic Performance of ZnO Nanorods Coupled by Two‐Dimensional α‐MoO3 Nanoflakes under UV and Visible Light Irradiation

We exploit the utilization of two‐dimensional (2D) molybdenum oxide nanoflakes as a co‐catalyst for ZnO nanorods (NRs) to enhance their photocatalytic performance. The 2D nanoflakes of orthorhombic α‐MoO₃ were synthesized through a sonication‐aided exfoliation technique. The 2D MoO₃ nanoflakes can be further converted to substoichiometric quasi‐metallic MoO_3?x by using UV irradiation. Subsequently, 1D–2D MoO₃/ZnO NR and MoO_3?x/ZnO NR composite photocatalysts have been successfully synthesized. The photocatalytic performances of the novel nanosystems in the decomposition of methylene blue are studied by using UV‐ and visible‐illumination setup. The incorporated 2D nanoflakes show a positive influence on the photocatalytic activity of the ZnO. The obtained rate constant values follow the order of pristine ZnO NR<MoO₃/ZnO NR<MoO_3?x/ZnO NR composites. The enhancement of the photocatalytic efficiency can be ascribed to a fast charge carrier separation and transport within the heterojunctions of the MoO₃/ZnO NRs. In particular, the best photocatalytic performance of the MoO_3?x/ZnO NR composite can be additionally attributed to a quasi‐metallic conductivity and substoichiometry‐induced mid‐gap states, which extend the light absorption range. A tentative photocatalytic degradation mechanism was proposed. The strategy presented in this work not only demonstrates that coupling with nanoscale molybdenum oxide nanoflakes is a promising approach to significantly enhance the photocatalytic activity of ZnO but also hints at new type of composite catalyst with extended applications in energy conversion and environmental purification.     

Preparation and properties of poly(N‐isopropylacrylamide)/poly(N‐isopropylacrylamide) interpenetrating polymer networks for drug delivery

A novel poly(N‐isopropylacrylamide) (PNIPA)/PNIPA interpenetrating polymer network (IPN) was synthesized and characterized. In comparison with conventional PNIPA hydrogels, the shrinking rate of the IPN hydrogel increased when gels, swollen at 20 °C, were immersed in 50 °C water. The phase‐transition temperature of the IPN gel remained unchangeable because of the same chemical constituent in the PNIPA gel. The reswelling kinetics were slower than those of the PNIPA hydrogel because of the higher crosslinking density of the IPN hydrogel. The IPN hydrogel had better mechanical strength because of its higher crosslinking density and polymer volume fraction. The release behavior of 5‐fluorouracil (5‐Fu) from the IPN hydrogel showed that, at a lower temperature, the release of 5‐Fu was controlled by the diffusion of water molecules in the gel network. At a higher temperature, 5‐Fu inside the gel could not diffuse into the medium after a burst release caused by the release of the drug on the surface of the gel. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1249–1254, 2004     

Gel network photodisruption: a new strategy for the codelivery of plasmid DNA and drugs

In the last 5 years, we have gained further insight on the physical/chemical field of DNA gels. Our expertise on the gel swelling behavior, compaction of DNA by cationic entities, as lipids and surfactants, as well as on the assembly structures of these complexes allow us for the development of novel systems to be used in a variety of biomedical applications. In our previous reports, the physicochemical characterization has been well-established, and now one can evolve to the challenge of using DNA-based carriers in the biological area. Moreover, a new plasmid DNA (pDNA) hydrogel that is porous, is able to swell in the presence of additives, is biocompatible and, thus, is suitable to be used therapeutically was prepared. Here, the dual release of pDNA and solutes with pharmaceutical interest was the main challenge, and thus, we report on the photodisruption of plasmid DNA (pDNA) gels cross-linked with ethylene glycol diglycidyl ether (EGDE) as a strategy for this simultaneous release. The disruption over time, after the irradiation of the gel with ultraviolet light (400 nm), was characterized through the cumulative plasmid DNA release, the evolution in dry weight, the extent of swelling, and also the variations in the gel mesh size. The controlled release of different molecular weight solutes from plasmid DNA gels was investigated, and the influence of both the hydrogel degradation and cross-linker density on the release kinetics were addressed. While the release of lysozyme follows a Fickian process, the release of bovine serum albumin (BSA) and fluoresceinisothiocyanato-dextran (FITC-dextran) is characteristic of a Super Case II release phenomena. In addition, the size of the three solutes partially influences the release behavior; polymer chain mobility and the degree of swelling also play a role. To gain a fundamental understanding of drug release profile from pDNA matrices, in vitro release studies were evaluated using several anti-inflammatory drugs. The quantification of the release mechanism indicates a Super Case II release profile, which can be related with the gel swelling degree. A correlation between the drug release trend and the drug hydrophobicity can be found, with more hydrophobic drugs showing a slower release rate. In brief, this new pDNA gel system is biocompatible, is degradable upon light irradiation, and allows for the controlled and sustained release of plasmid DNA and incorporated solutes. This codelivery of pDNA and drugs would find relevant clinical uses due to the possibility of gene and nongene therapy combination in order to improve the therapeutic efficiency.     

Bis(trimethoxysilylpropyl)amine and tetraethoxysilane derived gels as effective controlled release carriers for water-soluble drugs of small molecules

The controlled release of sodium salicylate (SS) from the gels derived from bis(trimethoxysilylpropyl)amine (TSPA) or the mixture of TSPA with tetraethoxysilane (TEOS) was investigated. The experimental results suggest that the release of SS can be easily controlled by adjusting the ratio between TSPA and TEOS. Increasing the ratio between TSPA and TEOS lowers the surface area and pore volume of the gels, while enhances the interactions between the drug and the gel matrix. Therefore, reduces the release rate of the drug effectively. The overall release process is found to be diffusion controlled, and the release behavior can be well explained by considering the effects of the textual properties of the gels and the interactions between the drug and the gel matrix. TSPA is found to be a very convenient and effective precursor for the preparation of gels for controlled release of both hydrophilic and hydrophobic drugs, especially water-soluble drugs of small molecules.     

6-O-carboxymethyl-chitin (CM-chitin) as a drug carrier

Gel was prepared from 6-O-carboxymethyl-chitin (CM-chitin) by the addition of iron(III) chloride under mild conditions without any organic solvent. The optimal conditions for the gel formation were 15 to 30 mM iron(III) chloride and 0.5 to 0.8 degree of substitution in CM-chitin. The amounts of bovine serum albumin (BSA) and the anticancer drug doxorubicin (DOX) incorporated into CM-chitin gels were more than 80% and 30%, respectively under the conditions described above. The release of BSA or DOX from the gels was observed to be increased by lysozyme digestion in a time-dependent manner. This result indicates that CM-chitin might prove useful as a carrier gel for the sustained release of drugs and cytokines, including vaccines.     

微凝胶增强两性复合水凝胶的制备与性能

将核壳微凝胶包埋在两性基质中,制备了复合水凝胶(CAH)。 研究发现,利用微凝胶与聚合物链之间的物理缠结作用,可以使复合凝胶具有致密的网络结构,力学性能显著提高;复合凝胶对pH和离子强度敏感,呈现出典型的两性聚电解质凝胶的溶胀行为。 同时微凝胶的存在和特殊的复合结构,可赋予CAH两性凝胶基质所不具有的响应性,并实现在高温下快速响应。