InCl3-Assisted Synthesis of Pyrano[2,3-a]carbazoles via Multicomponent Reaction

A facile, efficient, and environmentally friendly protocol for the synthesis of pyrano[2,3-a]carbazoles has been developed by one-pot multicomponent reaction of benzaldehyde/isatin with malononitrile and 1-hydroxycarbazoles in the presence of InCl₃ as catalyst.     

Ein neuer Typ quaternärer Oxometallate: K3Na2[InO4]

With K₃Na₂[InO₄] the first example of new kind of oxides of the type A₃A₂[MO₄] with R(A)>R(A) was prepared in form of colourless single crystals by oxidation of the intermetallic compound KNaIn₂. Intimate mixtures of the educts (K₂O₂: K_0.5Na_0.5In=1.2:1) were heated in sealed Ag-tubes (380 °C, 2 d, then 480 °C, 5 d). K₃Na₂[InO₄] crystallizes monoclinic (P2₁/n) witha=1012.6 pm,b=969.9 pm,c=725.4 pm, =91.02°;Z=4. The crystal structure was elucidated by four-circle diffractometer (PW 1100, Ag-K, 6047I _o(hkl),R=7.3%,R _w=4.4%). The new typ forms a very complicated 3-dimensional network ³ {Na₂InO₄} stuffed by 3 K⁺. The Madelung part of lattice energy, MAPLE, is calculated and discussed.

Professor Edwin Hengge zum 60. Geburtstag am 21. Juli 1990 gewidmet     

Reaction of trimethylaluminum with calixarenes. I. Synthesis and structure of [Calix[8]arene methyl ether] [AlMe3]6·2 toluene and of [p-tert-butylcalix[8]arene methyl ether] [AlMe3]6·4 benzene

Reaction of the methyl ether of calix[8]arene with AlMe₃ yields [calix[8]arene methyl ether] [AlMe₃]₆·2 toluene,1, while that ofp-tert-butylcalix[8]arene gives [p-tert-butylcalix[8]arene methyl ether] [AlMe₃]₆·4 benzene,2. Both compounds1 and2 fail to react with alkali metal salts, MX. In1, the absence of a butylpara-substituent affords greater flexibility than is the case for thetert-butyl compound2. Thus, all six of the AlMe₃ groups are located on the outside of the macrocyclic ring (in projection) in1, but two AlMe₃ units are found on the inside in2. Colorless, air-sensitive crystals of1 belong to the triclinic space group witha=13.690(8),b=14.317(4),c=14.738(6) Å, =76.11(3), =62.36(4), =82.41(4)^o, andD _c =1.06 g cm^–3 forZ=1. Refinement led toR=0.101 for 1154 observed reflections.2 crystallizes in with =12.400(6),b=16.229(8),c=19.251(5) Å, =96.17(3), =107.25(3), =101.54(3)^o, andD _c =1.01 g cm^–3 forZ=1. Refinement of2 gaveR=0.128 for 4351 observed reflections. The macrocyclic array in both1 and2 lies about a crystallographic center of inversion. Supplementary Data relating to this article are deposited with the British Library as Supplementary Publication No. SUP 82049 (48 pages).     

Vibrational spectra of the peroxotantalates (NH4)3[Ta(O2)4], K3[Ta(O2)4], Rb3[Ta(O2)4] and Cs3[Ta(O2)4] and the crystal structure of Rb3[Ta(O2)4]

The compounds (NH₄)₃[Ta(O₂)₄], K₃[Ta(O₂)₄], Rb₃[Ta(O₂)₄] and Cs₃[Ta(O₂)₄] have been prepared and investigated by X-ray powder methods as well as Raman- and IR-spectroscopy. In the case of Rb₃[Ta(O₂)₄] the structure has been solved from single crystal data. It is shown that all these compounds are isotypic and crystallize in the K₃[Cr(O₂)₄] type (SG , No. 121). The infrared- and Raman spectra (recorded on powdered samples) are discussed with respect to the internal vibrations of the peroxo-group and the dodecahedral [Ta(O₂)₄]³⁻ ion. Symmetry coordinates for the [Ta(O₂)₄]³⁻ ion are given from which the vibrational modes of the O-O stretching vibrations of the O₂²⁻ groups, the Ta-O stretching vibrations and the Ta-O bending vibrations are deduced.     

Synthesis,characterization and thermal analysis of [Fe(N2H4)2(CH3COO)2]

[Fe(N₂H₄)₂(CH₃COO)₂] was synthesised and characterized for the first time by chemical analysis, magnetic measurements, electronic and IR spectral studies. Its thermal reactivity was ascertained by thermogravimetric (TG) and derivative thermogravimetric (DTG) techniques and it has been concluded that unlike some other metal carboxylate hydrazinates, it does not show any autocatalytic behaviour. The decomposition was also subjected to kinetic analysis using the equations of Coats-Redfern and Horowitz-Metzger by the method of weighted least-squares.     

K2CO3-Mediated,One-Pot,Multicomponent Synthesis of Medicinally Potent Pyridine and Chromeno[2,3-b]pyridine Scaffolds

An efficient one-pot, multicomponent synthesis of 3,5-dicyanopyridines has been developed from the reaction of malononitrile and different thiophenol or thiols with a variety of aldehydes (aromatic including hindered ones, heteroaromatic, and aliphatic) in the presence of 20 mol% of K₂CO₃ in refluxing 50% aqeuous ethanol. KMnO₄ has been utilized as a readily available, inexpensive oxidant for the in situ transformation of the initially formed dihydropyridine intermediate. K₂CO₃ also mediates the one-pot formation of chromeno[2,3-b]pyridines from reaction of salicylaldehyde or its analogs with malononitrile and thiol or thiophenols. Both of these conditions also work equally well under 50-fold scale-up conditions.

Supplemental materials are available for this article. Go to the publisher's online edition of Synthetic Communications® to view the free supplemental file.     

Synthesis, crystal structure and thermochemical behaviour of a barium complex [Ba(5-OH-BDC)(H2O)3] [5-OH-H2BDC = 5-hydroxyisophtalic acid]

A novel complex [Ba(5-OH-BDC)(H₂O)₃] [5-OH-H₂BDC = 5-hydroxyisophtalic acid] was synthesized and characterized by X-ray crystallography. The complex is Monoclinic P2₁/c, a = 11.1069(4), b = 14.8192(6), c = 6.5005(2) Å, β = 103.465(3)° and Z = 4, which exhibits a three-dimensional framework formed by linkage of adjacent two-dimensional (6, 3) layers via intermolecular hydrogen bonds. The title complex has been studied by IR spectrum and TG-DTG. The constant-volume combustion energy of the complex, Δ_cU, was determined as being (−3210.45 ± 1.41) kJ mol⁻¹ by a precise rotating-bomb calorimeter at 298.15 K. The standard enthalpy of combustion, , and the standard enthalpy of formation, , were calculated as being (−3207.97 ± 1.41) and (−1922.80 ± 1.76) kJ mol⁻¹, respectively. A calculation model for determining the specific heat capacity of the complex with an improved RD496-III microcalorimeter is also derived. The specific heat capacity of the complex was (6158.387 ± 0.187) J mol⁻¹ K⁻¹.     

C3N6H6(H3BO3)2的合成及晶体结构

以三聚氰胺和硼酸为原料在水溶液中反应合成出了一种新的BCN化合物先驱体C3N6H6(H3BO3)2。XRD表征结果表明三聚氰胺和硼酸的最佳配比为1∶3(物质的量比)。用单晶X-射线衍射分析法测定了该化合物的晶体结构。该化合物属单斜晶系,空间群为P21/C,晶胞参数为a=0.3597(7)nm,b=2.0105(4)nm,c=1.4112(3)nm,α=90,°β=92.07(3),°γ=90,°V=1.0199(3)nm3,Z=4,D c=1.627g.cm-3,μ(MoKα)=0.144mm-1,F(000)=520。晶体结构经全矩阵最小二乘法修正,最终可靠因子R1=0.0519,wR2=0.1361。该化合物是由C3N6H6分子和H3BO3分子通过氢键加合组装形成的三维超分子结构化合物。     

Spectral properties of Nd-doped BiB3O6 crystal

Transparent Nd: BiB₃O₆ crystal has been grown by top-seeded method. The refraction indices of the crystal were measured and the parameters of chromatic dispersion were fitted. The room temperature absorption spectra of the crystal have been measured and compared with that of 0.2 mol/L NdCl₃ solution. According to Judd-Ofelt (JO) theory, the spectral strength parameters Ω₂ = 0.1776×10⁻²⁰ cm², Ω₄ = 0.1282−10⁻²⁰1 cm² and Ω₆ = 0.1357X10^-20 cm² of Nd³⁺ ion were fitted. The radiative transition probabilities A_J,J’, oscillator strengths f_J,J’, radiative lifetime rand the branching ratio β_J’ have all been calculated. Based on these parameters, the properties and application perspective are discussed.     

金属有机框架材料对[Fe(HB(pz)3)2]自旋转换行为的影响

通过在介孔结构金属有机框架材料MIL-101（Cr）和MIL-100（Al）的孔洞中合成自旋交叉化合物[Fe（HB（pz）₃）₂]的方法,可以得到SCO@MOF复合物。通过红外光谱（FTIR）、粉末X射线衍射（PXRD）、原子吸收光谱（AAS）以及气体吸附-脱附等进行了进一步测试。通过变温磁测量对复合材料的温度诱导自旋转换行为的研究表明,复合材料的自旋转换行为发生改变甚至是消失了。复合材料的这一现象可以解释为[Fe（HB（pz）₃）₂]在MOF主体材料的孔洞中形成了一种新的结晶相,且孔壁压力将会阻碍[Fe（HB（pz）₃）₂]从低自旋态向高自旋态转变。不同SCO@MOF复合物得到了相似的自旋转换行为结果。这确认了当自旋交叉化合物在金属有机框架材料孔洞中形成时,MOFs材料的限制压力或基体效应对其自旋转换行为的影响显然是至关重要的。     

金属有机框架材料对[Fe（HB（pz）3）2] 自旋转换行为的影响

通过在介孔结构金属有机框架材料MIL^-101（Cr）和MIL^-100（Al）的孔洞中合成自旋交叉化合物[Fe（HB（pz）₃）₂] 的方法,可以得到SCO@MOF复合物。通过红外光谱（FTIR）、粉末X射线衍射（PXRD）、原子吸收光谱（AAS）以及气体吸附-脱附等进行了进一步测试。通过变温磁测量对复合材料的温度诱导自旋转换行为的研究表明,复合材料的自旋转换行为发生改变甚至是消失了。复合材料的这一现象可以解释为[Fe（HB（pz）3）2] 在MOF主体材料的孔洞中形成了一种新的结晶相,且孔壁压力将会阻碍[Fe（HB（pz）₃）₂] 从低自旋态向高自旋态转变。不同SCO@MOF复合物得到了相似的自旋转换行为结果。这确认了当自旋交叉化合物在金属有机框架材料孔洞中形成时,MOFs材料的限制压力或基体效应对其自旋转换行为的影响显然是至关重要的。     

A simple and effcient approach to one-pot synthesis of mono- and bis-N-aryl-3-aminodihydropyrrol-2-one-4-carboxylates catalyzed by InCl3简

An efficient and straightforward procedure has been developed for the synthesis of highly substituted mono- and bis-N-aryl-3-aminodihydropyrrol-2-one-4-carboxylates via a one-pot, four-component domino reaction of amines, dialkyl acetylenedicarboxylates and formaldehyde in the presence of InCl3 （20 mol%） in MeOH at ambient temperature. The salient advantages of this method are mild reaction conditions, environmentally benign, high to excellent yields, shorter reaction times, easy operation and no column chromatographic separation.     

One-Pot Synthesis of Phenacyl Esters from Acetophenone, [Bmim]Br3, and Potassium Salts of Carboxylic Acids Under Solvent-Free Conditions

One-pot synthesis of phenacyl esters from acetophenone, [Bmim]Br₃, and potassium salts of carboxylic acids under solvent-free conditions gave the corresponding phenacyl esters with excellent yields.     

Electrochemical Behavior of K3[Fe(CN)6] on the Electrode Coated with Modified Multi‐Walled Carbon Nanotubes

The electrochemical behavior of K₃[Fe(CN)₆] was studied on an ITO electrode that was coated with β‐cyclodextrin (CD) modified multi‐walled carbon nanotubes (MWNTs) and with carboxyl modified multi‐walled carbon nanotubes (MWNT‐COOHs). MWNT‐COOHs showed an excellent electrocatalytic effect on the redox of K₃[Fe(CN)₆] while MWNT‐CDs had a subdued effect on the electrochemical response of K₃[Fe(CN)₆]. It is probably due to mismatching between K₃[Fe(CN)₆] and cyclodextrin, which hampers the contact of K₃[Fe(CN)₆] with carbon nanotubes. Moreover, the electrochemical behavior of K₃[Fe(CN)₆] on the MWNT‐COOHs coated ITO electrode at various scan rates also was measured. The results indicated that both potential difference between redox peaks and peak current of K₃[Fe(CN)₆] increased with increasing scan rate. A good linearity of peak current versus scan rate was observed.     

Four-Component Domino Reaction for the Synthesis of 1-(1H-Indol-2-yl)-1H-pyrazolo[1,2-b]phthalazine-5,10-diones

Facile, efficient, four-component domino reaction of dialkylphthalates, hydrazine hydrate, indole-3-carboxaldehydes, and malononitrile/ethyl cyanoacetate leads to the formation of 1-(1H-indol-2-yl)-1H-pyrazolo [1,2-b] phthalazine-5,10-diones in the presence of InCl₃ as catalyst in refluxing ethanol for 1 h in good yields. This four-component domino reaction transformation presumably proceeds via sequential addition, dehydration, condensation, and cyclization steps.     

An efficient palladium catalytic system for microwave assisted cyanation of aryl halides

Application of a new catalytic system for cyanation reaction of various aryl halides using K₄[Fe(CN)₆] as cyanating source was examined. The reactions were performed under microwave irradiation and results showed that application of this catalytic system and DMF at 130 °C minimized the reaction times from hours to minutes in good to excellent yields.     

Formation of α-Fe2O3/FeOOH nanostructures with various morphologies by a hydrothermal route and their photocatalytic properties

A series of α-Fe₂O₃/FeOOH nanostructures with different morphologies have successfully been synthesized based on K₄[Fe(CN)₆] at 140 °C by a novel hydrothermal method. The morphology and phase of α-Fe₂O₃/FeOOH can be controlled by adjusting the reaction time. UV–vis absorption spectrum, X-ray powder diffraction, and transmission electron microscopy analyses were used to characterize the resulting products. A detailed, rational mechanism is proposed for the formation of α-Fe₂O₃/FeOOH nanostructures. The potential applications of the as-synthesized α-Fe₂O₃/FeOOH nanoparticles with different morphologies on photocatalytic decomposition of salicylic acid were also investigated.     

Indium-based liquid clathrates. I. The preparation of the first indium liquid inclusion compound and crystal structure of its parent complex, [K · 18-Crown-6]2[InClI2(CH3)][InClI(CH3)2]

The synthesis of the first liquid clathrate derived from an indium precursor is described. The aromatic/anion ratio of the inclusion complex prepared using benzene is 12.4. The use of toluene results in the inclusion of 10.3 guest toluene molecules/anion. The crystal structure of the parent complex, [K·18-Crown-6]₂[InClI₂(CH₃)][InClI(CH₃)₂] was carried out. The compound belongs to the monoclinic space groupP2₁/c, witha=19.508(9),b=8.503(5), andc=29.437(9) Å, =96.55(3)°, andD _calc=1.83 g cm^–3 forZ=4. Least-squares refinement based on 3449 observed reflections led to a finalR=0.099. The structure displays two different environments for the two K⁺ cations in the asymmetric unit. One adopts the near-planar [K·18-crown-6]⁺ configuration while the other K⁺ resides 0.81 Å above the second 18-crown-6 plane. The latter K⁺ is apparently pulled out of the crown by a strong interaction with a Cl^– ion. Supplementary Data related to this article are deposited with the British Library as Supplementary Publication No. SUP 82046 (25 pages).     

Synthesis and Crystal Structure of 3-Benzyl-6-trichloromethyl-[1,2,4]triazolo[3,4-b][1,3,4]thiadiazole

The title compound 3-benzyl-6-trichloromethyl-[1,2,4]triazolo[3,4-b][1,3,4]thiadiazole I （C11HTC13N4S, Mr = 333.62） has been synthesized, and its structure was determined by elemental analyses, IR, ^1H NMR, ^13C NMR, and X-ray diffractions. The crystal is of triclinic, space group P1^-, with a = 5.898（3）, b = 10.510（4）, c = 11.580（5） A, α = 74.936（7）, β= 75.476（7）, γ = 79.647（7）°, V= 665.9（5）/A^3, F（000） = 336, Z= 2, Dc = 1.664 g/cm^3, 2 = 0.71073A, p = 0.834 mm^-1, the final R = 0.0605 and wR = 0.0900. The secondary bonding interactions （SBIs） S…N and π-π stacking interactions are found in the crystal structure and they link the molecules into a three-dimensional network.