聚乙二醇在超临界二氧化碳介质中的结晶行为

利用DSC和偏光显微镜研究了聚乙二醇在超临界CO2 中的结晶情况 ,超临界条件下得到的晶粒小而均匀 ,DSC测试还表明超临界CO2 可提高聚乙二醇的熔眯和溶解焓。     

聚对苯二甲酸乙二醇酯/聚乙二醇醚插层嵌段共聚物的结晶性能

合成了不同用量、不同分子量的聚乙二醇醚(PEG)或聚丁二醇醚(PTMC)与聚对苯二甲酸乙二醇酯(PET)/蒙脱土(MMT)的嵌段共聚物。研究了MMT在共聚物中的分散状态及PEG或PTMG对PET/MMT插层聚合物结晶性能的影响。结果表明,MMT在共聚物中以纳米尺寸分散;加入PEG或PTMG增强了聚酯链段的柔顺性,使共聚物熔体降温过程的结晶温度提高,冷结晶温度降低,即插层嵌段共聚物的结晶速率提高;在合成的共聚物中,分子量为2000,用量为DMT的6%的PEG对插层共聚物结晶速率的促进作用最大     

聚乙二醇/氮化硼复合材料相变导热性能及其结晶行为

本文采用熔融共混浇筑的方法制备了聚乙二醇/氮化硼(PEG/BN)相变复合材料,并研究了不同尺度片状BN对相变复合材料导热性能和结晶行为的影响。 通过扫描电子显微镜(SEM)、热常数分析仪、红外热成像分析仪和差示扫描量热仪(DSC)研究了相变复合材料的微观形貌、导热系数和相变过程,并利用莫志深法对DSC结果进行了非等温结晶动力学分析。 结果表明,较大片状直径(50 μm)的BN可以更有效地提高聚乙二醇的导热系数,当BN填料质量分数为40%时,相变复合材料的导热系数可达到5.04 W/(m·K)。 在快速降温条件下,片径为50 μm的BN填料可以缩短PEG的半结晶时间,提高结晶速率,使相变复合材料具有较大的相变焓。     

聚乙二醇基质中纳米乙酰丙酮铽的荧光特性研究

在高分子聚乙二醇基质中制得了纳米乙酰丙酮铽的络合物并对其荧光特性进行了研究。结果表明,纳米乙酰丙酮铽的荧光光谱在峰位、峰形、峰强和主峰的半高宽等方面都与普通乙酰丙酮铽有明显差别。     

Formation of Perfluorocarbon Microemulsion by Fluorinated Polyethylene Glycol

Perfluorocarbons (PFCs) are chemically and biologically inert, highly gas‐dissolving, highly fluidic, and with low surface tension. Their unique properties have triggered various applications of these compounds in the areas such as oxygen delivery, liquid ventilation, diagnosis, and lubrication. However, PFCs are immiscible with aqueous media, hence surfactants are required to make PFCs as PFC‐in‐water or water‐in‐PFC microemulsions for practical application. In order to overcome this obstacle, one approach should be beneficial to create a PFC microemulsion system with the aid of fluorosurfactants which can drive the interfacial tension of PFC with water to a very low value. In this study, the fluorophilic moiety of fluorosurfactant is an end‐functional perfluorocarbon group (R_F). Methoxy polyethylene glycol (MPEG) was selected as the hydrophilic moiety due to its unique characteristics for versatile application. A series of high yield perfluoroalkylated MPEG surfactants were synthesized by reacting different MW of perfluoroacid chlorides (C_nF_2n+1COCl) with various low MW of amino‐MPEG by amide linkage. According to the ratios of hydrophilic to fluorophilic groups balance (HFB) for these PFC microemulsions obtained, an empirical formula was applied to calculate the HFB value which can be used to design the structure of fluorosurfactant for the preparation of PFC microemulsions. Two different types of PFC liquids, perfluorooctyl bromide (PFOB) and perfluoropolyether (PFPE), were examined for the formation of PFC microemulsions. Our results indicated that the domain of PFC microemulsion was strongly affected by not only the ratio of R_F chain length to MPEG chain length of the fluorosurfactant used but also the type of PFC studied.     

臭氧化合成聚乙二醇醛基衍生物

以甲氧基聚乙二醇为原料, 通过烯烃化得到甲氧基聚乙二醇烯烃,最后经臭氧化反应得到甲氧基聚乙二醇醛基衍生物。 通过核磁共振波谱仪(NMR)和基质辅助激光解吸电离飞行时间质谱(MALDI-TOF-MS)对产物的结构和性能进行了表征。 结果表明,该方法合成的产物纯度高,无副产物,甲氧基聚乙二醇乙醛和聚乙二醇丙醛的产率分别高达98%和99%,取代度分别为90.87%~99.91%和98%~100%。     

聚乙二醇/功能化石墨烯层状纳米复合材料热稳定性的提高

通过溶液共混技术成功制备了一系列聚乙二醇功能化石墨烯(GO-PEG)填充的聚乙二醇4000(PEG4000)基纳米复合材料.利用红外(FT-IR)、X衍射(XRD)、扫描电镜(SEM)、热重(TG)及玻璃化转变温度(Tg)等表征手段详细研究了复合材料的结构和热性能.结果表明:GO-PEG可均匀分散在聚合物基体中,纳米复合材料呈层状结构;组分间的较强界面相互作用协同增强了纳米复合材料的热稳定性能.最终提出了层状纳米复合材料的形成过程及机理.     

聚乙二醇支持的底物或试剂参与的小分子化合物的合成

对近年来聚乙二醇为可溶性聚合物支持体支持的底物或试剂参与的小分子化合物的液相有机合成反应进行了总结。参考文献36篇。     

NH_4~+，尿素和聚乙二醇对蒙脱土的抑制膨胀作用

通过膨胀仪与粒度分布仪对NH_4~+, K~+，尿素和聚乙二醇（PEG）对蒙脱土／ 水悬浮体中土颗粒水化、膨胀及分钐的抑制作用进行了系统研究。发现NH_4~+与 K~+一样可通过嵌入蒙脱土晶体的六角网孔而产生相似的水化抑制作用。尿素随着 含量的升高对粘土水化产生更强的抑制作用，但存在一个最高点。PEG与K~+和 NH_4~+可形成复合物，产生协和的抑制作用，而尿素与PEG/K~+和PEG/NH_4~+的复 合是目前发现的最强的抑制蒙脱土水化分散与膨胀的体系。     

Reorientational Dynamics of Polyethylene Glycol/PAMAM Dendrimer Blends

The reorientational dynamics of dipoles in a series of blends of Polyethylene Glycol (PEG) and poly(amidoamine) (PAMAM) dendrimers were investigated by broadband dielectric relaxation spectroscopy (DRS). Measurements were performed over a wide range of frequency and temperature. Neat PEG exhibits three relaxation processes: the segmental process in the amorphous phase and two faster processes due to the localized motions in the amorphous regions and the rotation of hydroxyl end groups. Addition of dendrimers to the PEG matrix slows down the segmental process in the amorphous phase, but has no effect on the relaxation time of local processes in PEG. However, H-bonding which forms between the PEG oxygen and the amino groups on dendrimer surface is responsible for a shift of local processes in dendrimers to lower frequency. A detail analysis of the effect of temperature, concentration of dendrimers and molecular weight of PEG on the relaxation dynamics is offered.     

Lipid-similar Thermal Transition of Polyethylene Glycol Alkyl Ether Detergents

A narrow, reversible endothermic main transition is found in the aqueous micellar phase of octaethylene glycol tetradecyl ether (C₁₄E₈) by DSC, characterized by a transition temperature of 41°C and a H value of 0.5 kcal mol^–1, which is not observed by light scattering. This transition is assigned to a cooperative conformational rearrangement of the assembled amphiphilic detergent molecules and not to a micelle aggregation process. It is suggested that the detergents polar head group is primarily involved in this rearrangement.This revised version was published online in November 2005 with corrections to the Cover Date.     

导热增强聚乙二醇相变复合材料的制备及其性能

本文以聚乙二醇(PEG)为相变材料,通过添加不同的无机填料,采用熔融共混浇筑方式制备了导热增强型相变复合材料。 通过扫描电子显微镜(SEM)、热常数分析仪、差示扫描量热仪(DSC)、红外热成像和热重分析仪研究了所制备复合材料的微观结构、导热性能与相变过程。 研究结果表明,相比于碳酸钙和氧化铝,在相同添加含量下,氮化硼(BN)可有效提高PEG的导热系数,当BN质量分数为40%时,导热系数可达到3.40 W/(m·K);当填料添加量相同时,片状BN和不规则纳米碳酸钙(CaCO₃)比球形氧化铝(Al₂O₃)对PEG具有更加优良的定型效果,在相变过程中,能够更加有效阻隔PEG的流动,保持复合材料的形状稳定性。     

聚己内酯,聚乙二醇及其嵌段物的结晶行为

聚己内酯，聚乙二醇及其嵌段物的结晶行为高家武，段跃新，王身国，邱波（北京航空航天大学材料科学与工程系北京１０００８３）（中国科学院化学研究所北京）关键词聚己内酯，聚乙二醇，嵌段共聚物，结晶度，结晶动力学聚己内酯（ＰＣＬ）作为生物降解材料，无毒、无副作...     

纳米TiO2光催化降解聚乙二醇反应

纳米TiO2光催化降解聚乙二醇反应;纳米二氧化钛; 光催化; 聚乙二醇     

聚乙二醇相转移催化合成苊酮

研究了在铬酸酐、冰醋酸和相转移催化剂聚乙二醇存在下苊的氧化反应，较温和的条件可高产率地得到苊酮。     

Soret Coefficients for Aqueous Polyethylene Glycol Solutions and Some Tests of the Segmental Model of Polymer Thermal Diffusion

A thermogravitational cell is used to measure Soret coefficients (s) for dilute binary aqueous solutions of ethylene glycol, diethylene glycol, triethylene glycol, tetraethylene glycol, and polyethylene glycol (PEG) fractions with average molecular weights from 200 to 20,000 g-mol^–1. The cell design allows the top and bottom halves of the solution column to be withdrawn and injected into a high-precision HPLC differential refractometer detector for analysis. Previously reported mutual diffusion coefficients D and the measured Soret coefficients are used to calculate thermal diffusion coefficients D _T. s and D vary with the PEG molecular weight M as M ^+0.53 and M ^–0.52, respectively; hence, D _T = sD is essentially independent of M. The segmental model of polymer thermal diffusion predicts D _T = D_seg U _S/RT ², where D _seg is the segment diffusion coefficient, U _S the solvent activation energy for viscous flow, R the gas constant, and T the temperature. The predicted D _T values, although independent of M, are too large by a factor of five. Additional tests of the segmental model are provided using literature data for polystyrene + toluene, n-alkane + CCl₄, and n-alkane + CHCl₃ solutions. Agreement with experiment is not obtained. In particular, the measured D _T values for the alkane solutions are negative.     

Morphologically Diverse Micro- and Macrostructures Created via Solvent Evaporation-Induced Assembly of Fluorescent Spherical Particles in the Presence of Polyethylene Glycol Derivatives

The creation of fluorescent micro- and macrostructures with the desired morphologies and sizes is of considerable importance due to their intrinsic functions and performance. However, it is still challenging to modulate the morphology of fluorescent organic materials and to obtain insight into the factors governing the morphological evolution. We present a facile bottom-up approach to constructing diverse micro- and macrostructures by connecting fluorescent spherical particles (SPs), which are generated via the spherical assembly of photoisomerizable azobenzene-based propeller-shaped chromophores, only with the help of commercially available polyethylene glycol (PEG) derivatives. Without any extra additives, solvent evaporation created a slow morphological evolution of the SPs from short linear chains (with a length of a few micrometers) to larger, interconnected networks and sheet structures (ranging from tens to >100 µm) at the air–liquid interface. Their morphologies and sizes were significantly dependent on the fraction and length of the PEG. Our experimental results suggest that noncovalent interactions (such as hydrophobic forces and hydrogen bonding) between the amphiphilic PEG chains and the relatively hydrophobic SPs were weak in aqueous solutions, but play a crucial role in creating the morphologically diverse micro- and macrostructures. Moreover, short-term irradiation with visible light caused fast morphological crumpling and fluorescence switching of the obtained structures.     

聚合物固载化聚乙二醇季胺盐型相转移催化剂的结构与催化活性

The gelatinous and macroporous phase transfer catalysts with multiple active centers were synthesized by means of quarterisation of PEG tertiary amine and chloromethylated St DVB copolymer. They were examined as phase transfer catalysts in the reaction of n C 8H 17 Br with solid NaI. The experimental results showed that the reaction rate was first order with respect to the concentration of n C 8H 17 Br. The effects of catalyst structure on the catalytic activity were also investigated. The observed reaction rate constant ( k obsd ) increased as the degree of cross linking of polymer decreased. Macroporous catalysts showed a higher activity (2～2 5 times) than that of microporous catalysts with the same degree of cross linking of polymer, particle size and amount of supported PEG. Molecular weight of PEG also showed much influence on k obsd . As molecular weight of PEG rose properly, the catalysts showed a higher activity. The results were discussed from the aspect of triphase catalysis reaction mechanism.     

聚乙二醇功能化离子液体的制备及其在有机反应中的应用

聚乙二醇功能化离子液体作为一个新的研究方向受到了化学研究者关注,该类离子液体已经成功地应用于许多有机合成反应中,可以明显改善催化剂性能,并可在一定程度上解决传统催化剂使用中遇到的难分离、难回收再利用的问题。本文介绍了聚乙二醇功能化离子液体的发展历程、制备方法和其作为反应介质、溶剂或催化剂在有机合成反应中应用的最新研究成果,主要包括加成反应、缩合反应、还原反应、酯化反应、硝化反应、氧化反应、水解反应、Heck 反应以及Suzuki-Miyaura反应等。