Development and validation of a near infrared method for the analytical control of a pharmaceutical preparation in three steps of the manufacturing process

A near infrared diffuse reflectance spectroscopy (NIRS) procedure for the quantitative control analysis of the active compound (otilonium bromide) in a pharmaceutical preparation in three steps of the production process (blended product, cores and coated tablets) and a methodology for its validation are proposed. The analytical procedure is composed by two consecutive steps. First, the sample is identified by comparing its spectrum with a second derivative spectral library. If the sample is positively identified, the active compound is quantified by using a previously established partial least squares (PLS) calibration model. The procedure was validated by studying repeatability, intermediate precision, accuracy and linearity. To this end, an adaptation of ICH (International Conference on Harmonisation) validation methodology to an NIR multivariate calibration procedure is proposed. The relative standard error of prediction (RSEP) was < or = 1% and the suitability of the procedure for control analysis was confirmed by the results obtained analysing new production samples produced over a three-month period.     

Development and validation of a near infrared method for the analytical control of a pharmaceutical preparation in three steps of the manufacturing process

A near infrared diffuse reflectance spectroscopy (NIRS) procedure for the quantitative control analysis of the active compound (otilonium bromide) in a pharmaceutical preparation in three steps of the production process (blended product, cores and coated tablets) and a methodology for its validation are proposed. The analytical procedure is composed by two consecutive steps. First, the sample is identified by comparing its spectrum with a second derivative spectral library. If the sample is positively identified, the active compound is quantified by using a previously established partial least squares (PLS) calibration model. The procedure was validated by studying repeatability, intermediate precision, accuracy and linearity. To this end, an adaptation of ICH (International Conference on Harmonisation) validation methodology to an NIR multivariate calibration procedure is proposed. The relative standard error of prediction (RSEP) was ≤ 1% and the suitability of the procedure for control analysis was confirmed by the results obtained analysing new production samples produced over a three-month period.     

Is the bound substrate in nitric oxide synthase protonated or neutral and what is the active oxidant that performs substrate hydroxylation?

We present here results of a series of density functional theory (DFT) studies on enzyme active site models of nitric oxide synthase (NOS) and address the key steps in the catalytic cycle whereby the substrate (L-arginine) is hydroxylated to N(omega)-hydroxo-arginine. It has been proposed that the mechanism follows a cytochrome P450-type catalytic cycle; however, our calculations find an alternative low energy pathway whereby the bound L-arginine substrate has two important functions in the catalytic cycle, namely first as a proton donor and later as the substrate in the reaction mechanism. Thus, the DFT studies show that the oxo-iron active species (compound I) cannot abstract a proton and neither a hydrogen atom from protonated L-arginine due to the strength of the N-H bonds of the substrate. However, the hydroxylation of neutral arginine by compound I and its one electron reduced form (compound II) requires much lower barriers and is highly exothermic. Detailed analysis of proton transfer mechanisms shows that the basicity of the dioxo dianion and the hydroperoxo-iron (compound 0) intermediates in the catalytic cycle are larger than that of arginine, which makes it likely that protonated arginine donates one of the two protons needed during the first catalytic cycle of NOS. Therefore, DFT predicts that in NOS enzymes arginine binds to the active site in its protonated form, but is deprotonated during the oxygen activation process in the catalytic cycle by either the dioxo dianion species or compound 0. As a result of the low ionization potential of neutral arginine, the actual hydroxylation reaction starts with an initial electron transfer from the substrate to compound I to create compound II followed by a concerted hydrogen abstraction/radical rebound from the substrate. These studies indicate that compound II is the actual oxidant in NOS enzymes that performs the hydroxylation reaction of arginine, which is in sharp contrast with the cytochromes P450 where compound II was shown to be a sluggish oxidant. This is the first example of an enzyme where compound II is able to participate in the reaction mechanism. Moreover, arginine hydroxylation by NOS enzymes is catalyzed in a significantly different way from the cytochromes P450 although the active sites of the two enzyme classes are very similar in structure. Detailed studies of environmental effects on the reaction mechanism show that environmental perturbations as appear in the protein have little effect and do not change the energies of the reaction. Finally, a valence bond curve crossing model has been set up to explain the obtained reaction mechanisms for the hydrogen abstraction processes in P450 and NOS enzymes.     

Influence of the procedure used to prepare the calibration sample set on the performance of near infrared spectroscopy in quantitative pharmaceutical analyses

Calibrating near infrared diffuse reflectance spectroscopy (NIRS) methods usually involves preparing a set of samples with a view to expanding the analyte concentration range spanned by production samples. In this work, the performances of the two procedures most frequently used for this purpose in near infrared pharmaceutical analysis, viz., synthetic samples obtained by weighing of the pure constituents of the pharmaceutical and doped samples made by under- or overdosing previously powdered production samples, were compared. Both procedures were found to provide similar results in the quantification of the active compound in the pharmaceutical, which was determined with a relative standard error of prediction (RSEP) of < 1.6%. However, the two types of sample preparation provide different spectra, which precludes the accurate quantification of synthetic samples from calibrations obtained with doped samples and vice versa. None of the mathematical pre-treatments tested with a view to reducing this different scattering (viz., second derivative, standard normal variate and orthogonal signal correction) could effectively solve this problem. This hinders accurate validation of the linearity of the procedure and makes it advisable to use doped samples which are markedly less different to production samples.     

Production of oxygen enriched air by rapid pressure swing adsorption

A novel rapid pressure swing adsorption (RPSA) process is described for production of 25–50% oxygen enriched air. The embodiment consists of one or more pairs of adsorbent layers contained in a single adsorption vessel. The layers undergo simultaneous pressurization-adsorption and simultaneous depressurization-purge steps. A total cycle time of 6–20 seconds is used. The process yields a very large specific oxygen production rate and a reasonable oxygen recovery for production of 20–50 mole% oxygen enriched gas.It is demonstrated by a simple mathematical model of isothermal single adsorbate pressure swing ad(de)sorption concept on a single adsorbent particle that the specific production rate of a PSA process cannot be indefinitely increased by reducing the cycle time of operation when adsorbate mass transfer resistances are finite.     

Graphical approach for complex PSA cycle scheduling

A simple graphical approach for complex pressure swing adsorption (PSA) cycle scheduling has been developed. This new methodology involves a priori specifying the cycle steps, their sequence, and the number of beds, and then following a systematic procedure that requires filling in a 2-D grid based on a few simple rules, some heuristics and some experience. The outcome or solution is a grid comprised of columns that represent the total cycle time, rows that represent the total number of beds, and cells that represent the duration of each cycle step, i.e., the complete cycle schedule. This new approach has been tested successfully against several cycle schedules taken from the literature, including a two-bed four-step Skarstrom cycle, a four-bed nine-step process with two equalization steps, a nine-bed eleven-step process with three pressure equalization steps, and a six-bed thirteen-step process with four pressure equalization steps and four idle steps. This approach also revealed the existence of numerous cycle schedules for each bed and cycle step combination examined. Although it cannot identify the total number of permutations or which one is better, it does provide a very straightforward way to determine some of the possible cycle schedules of virtually any PSA process that can be conceived.     

Pesticides analysis by liquid chromatography and capillary electrophoresis

Nowadays, a wide range of pesticides are used in agricultural production, and their monitoring in samples of environmental and alimentary interest is of extreme importance to ensure, among others, the safety of consumption of foods. The aim of this work is to provide updated information about the major developments in CE and HPLC in pesticide analysis, covering relevant publications between 2004 and early 2006. The use of different sample pretreatment steps to provide a suitable extraction of these compounds from the different matrices as well as to increase the sensitivity of the determination is also discussed.     

Application of near-infrared spectroscopy in the sugar industry for the detection of betaine

One problem in industrial molasses desugarization is the lack of a fast analytical method for process control. At the moment, control of the chromatographic production process is achieved by detecting refractive index and conductivity. However, since elution of some components takes place only in a narrowly defined time frame, the data gained are insufficient for effective online product quantification. Near-infrared (NIR) spectroscopy was applied to this process by development of a simple method for detection of betaine. Compared to chemometric models currently used, the developed method demonstrates the advantage of requiring only a small calibration set. Additionally, it can easily be transferred to other processes without further re-calibration. Based on the NIR spectrum of betaine, a characteristic peak in the spectrum could be assigned to the molasses compound betaine. A calibration was developed by using dissolved betaine in pure water. Afterwards, the calibration was tested for samples from a molasses desugarization process. The method was than successfully transferred to a complete chromatographic cycle of the industrial molasses desugarization process.     

Simultaneous determination of l-thyroxine (l-T(4)), d-thyroxine (d-T(4)), and l-triiodothyronine (l-T(3)) using a sensors/sequential injection analysis system

Requirements of high purity and enantiopurity for the raw materials of active substances used for the pharmaceutical formulations involved utilization of high reliable analytical techniques for the analysis of the active compound. Sequential injection analysis system with electrochemical sensors as detectors proved to be a very good alternative for the chromatographic methods, as it is more reliable, not expensive, and faster. Drugs containing only l-thyroxine (l-T(4)) or both l-T(4) and l-triiodothyronine (l-T(3)) are formulated for the dysfunctions of thyroid. A sequential injection analysis system that can use two amperometric immunosensors (for the assay of l-T(3) and l-T(4)) and an amperometric biosensor (for the assay of d-thyroxine, d-T(4)) as detectors is proposed for the purity and enantiopurity tests of the raw materials used for the formulation of the drugs for thyroid. The system proved to be very reliable. The three compounds can be determined on-line in synthesis process control with a frequency of 20 samples per hour.     

镍硫析氢活性阴极的电化学制备及其电催化机理

以硫代硫酸钠作为硫源, 在基本的瓦特浴镀液体系中通过恒电流电沉积方法获得了不同晶体结构的镍硫合金活性阴极. 通过能量散射谱(EDS)、X射线衍射(XRD)以及扫描电子显微镜(SEM)对镀层的化学成分、晶体结构以及表面形貌进行了分析, 并对活性阴极的电催化活性以及析氢过程机理进行了研究. XRD测试结果表明, 随着镀层中硫含量的变化, 镀层的晶体结构呈现出非晶态/Ni3S2混晶和金属间化合物(Ni3S2)两种晶体结构, 其中, 硫含量为33.9%(原子分数)的非晶态/Ni3S2混晶结构的活性阴极在碱性溶液中具有很好的析氢活性, 其优良的析氢活性主要来自于Ni3S2很强的吸附氢能力. 交流阻抗的测试结果表明, Ni3S2金属间化合物的析氢过程只存在一个电化学反应步骤, 而非晶态/Ni3S2混晶镍硫合金活性阴极的析氢过程存在三个电化学反应步骤.     

Simplified graphical approach for complex PSA cycle scheduling

A simple, graphical, unit block approach for rapid complex pressure swing adsorption (PSA) cycle scheduling has been developed. This new methodology involves a priori specifying the cycle steps, their sequence, and the number of beds, and then following a systematic procedure that requires filling in a 2-D grid. The outcome or solution is a unit block which can easily be extended to form the complete cycle schedule. This new approach has been tested successfully against several multi-bed and multi-step cycle schedules taken from the literature. It should thus be very useful for quickly scrutinizing different PSA cycle schedules for further PSA process development.     

Significant difference in active metabolite levels of ginseng in humans consuming Asian or Western diet: The link with enteric microbiota

After ingestion of ginseng, the bioavailability of its parent compounds is low and enteric microbiota plays an important role in parent compound biotransformation to their metabolites. Diet type can influence the enteric microbiota profile. When human subjects on different diets ingest ginseng, their different gut microbiota profiles may influence the metabolism of ginseng parent compounds. In this study, the effects of different diet type on gut microbiota metabolism of American ginseng saponins were investigated. We recruited six healthy adults who regularly consumed different diet types. These subjects received 7 days' oral American ginseng, and their biological samples were collected for LC‐Q‐TOF‐MS analysis. We observed significant ginsenoside Rb₁ (a major parent compound) and compound K (a major active metabolite) level differences in the samples from the subjects consuming different diets. Subjects on an Asian diet had much higher Rb₁ levels but much lower compound K levels compared with those on a Western diet. Since compound K possesses much better cancer chemoprevention potential, our data suggested that consumers on a Western diet should obtain better cancer prevention effects with American ginseng intake compared with those on an Asian diet. Ginseng compound levels could be enhanced or reduced via gut microbiota manipulation for clinical utility.     

Mediated electrochemistry of horseradish peroxidase. Catalysis and inhibition.

A precise determination of the complex mechanism of catalysis and inhibition involved in the reaction of HRP with H(2)O(2) as substrate and an outersphere single electron donor ([Os(bpy)(2)pyCl](+)) as cosubstrate is made possible by a systematic analysis of the cyclic voltammetric responses as a function of the scan rate and of the substrate and cosubstrate concentrations, complemented by spectrophotometric steady-state and stopped-flow experiments. The bell-shaped calibration curve relating the electrochemical response to the concentration of H(2)O(2) is qualitatively and quantitatively explained by taking into account the conversion of the catalytically active forms of the enzyme into the inactive oxyperoxidase in addition to the primary catalytic cycle. These characteristics should be kept in mind in biosensor applications of HRP. The ensuing analysis and data allow one to predict biosensor amperometric responses in all practical cases. From a mechanistic standpoint, conditions may, however, be defined which render inhibition insignificant, thus allowing an electrochemical characterization of the primary catalytic cycle. At very low concentrations of H(2)O(2), its diffusion tends to control the electrochemical response, resulting in proportionality with H(2)O(2) concentration instead of the square root dependence characteristic of the classical catalytic currents. Intriguing hysteresis and trace crossings behaviors are also quantitatively explained in the framework of the same mechanism. As a consequence of the precise dissection of the rather complex reaction mechanism into its various elementary steps, a strategy may be devised for gaining a better understanding of the mechanism and reactivity patterns of each elementary step.     

Quinolines in clothing textiles—a source of human exposure and wastewater pollution?

A production process in which the use of various types of chemicals seems to be ubiquitous makes the textile industry a growing problem regarding both public health as well as the environment. Among several substances used at each stage, the present study focuses on the quinolines, a class of compounds involved in the manufacture of dyes, some of which are skin irritants and/or classified as probable human carcinogens. A method was developed for the determination of quinoline derivatives in textile materials comprising ultrasound-assisted solvent extraction, solid phase extraction cleanup, and final analysis by gas chromatography/mass spectrometry. Quinoline and ten quinoline derivatives were determined in 31 textile samples. The clothing samples, diverse in color, material, brand, country of manufacture, and price, and intended for a broad market, were purchased from different shops in Stockholm, Sweden. Quinoline, a possible human carcinogen, was found to be the most abundant compound present in almost all of the samples investigated, reaching a level of 1.9 mg in a single garment, and it was found that quinoline and its derivatives were mainly correlated to polyester material. This study points out the importance of screening textiles with nontarget analysis to investigate the presence of chemicals in an unbiased manner. Focus should be primarily on clothing worn close to the body.     

(Eta2-alkyne)methyl(dioxo)rhenium complexes as aldehyde-olefination catalysts

Complexes CH3ReO2L (L = 2-butyne, 3-hexyne, diphenylacetylene) are catalysts for the olefination of aldehydes, using 4-nitrobenzaldehyde (4-nba) as the standard aldehyde and ethyldiazoacetate (eda) as the diazo compound. Spectroscopic studies including in situ 31P, 17O, 13C, and 1H NMR spectroscopy are used to elucidate the mechanism and the nature of the active species. One of the key steps of the mechanism is the rapid formation of phosphazine at the beginning of the cycle and its subsequent reaction with the metal dioxide complex to form the catalytically active carbene species.     

Synthesis,anticancer screening,and in silico ADME prediction of novel 2-pyridones as Pim inhibitors

A novel series of 26 substituted N-(2-ethylphenyl)-2-oxo-pyridine-3-carbonitriles have been designed and synthesized via one-pot synthesis of various aromatic aldehydes, different aromatic acetophenones, and 2-cyano-N-(2-ethylphenyl)acetamide 1 . Moreover, cytotoxicity of the target compounds was evaluated by NCI, which selected 14 compounds for one-dose screening. Among them, compound 21 was selected for five-dose screening, which confirmed its potency against most of cancer cell lines. This compound elicited selectivity profile against human cell line WI-38. Cell cycle analysis was carried out, revealed that compound 21 is an apoptosis inducer causing cell cycle arrest at G2/M. Further exploration on the mode of action by evaluating its effect against Pim-1, Pim-2, and Pim-3 demonstrated its inhibitory effect on Pim-1 and Pim-3 rather than Pim-2. Molecular docking showed that compound 21 binds with high affinity to the active site of Pim-1 enzyme through three hydrogen bonds and two arene-H bonds.     

Selective high-performance liquid chromatographic purification of bispecific monoclonal antibodies.

The recent development of improved production techniques for bispecific monoclonal antibodies (biMAbs) has significantly increased interest in specific purification procedures. In this investigation, a general high-performance liquid chromatographic (HPLC) purification method is proposed that allows highly purified biMAbs to be obtained from mouse ascites fluid containing a mixture of different antibodies, i.e., parental MAbs, active biMAb and a mixture of randomly assembled heavy and light chains. Proteins from ascites fluid were precipitated with ammonium sulphate and applied to a high-performance protein A column to separate the total immunoglobulin fraction. BiMAbs were isolated from other immunoglobulins by two subsequent passages through a high-performance hydroxyapatite (HPHT) column. This purification protocol combines specificity of protein A for immunoglobulin G (IgG) and high selectivity of hydroxyapatite for different IgG idiotypes. All purification steps were performed rapidly and reliably by HPLC. This method was applied to the purification of six different biMAbs with consistently high yields, purity and homogeneity. This general purification method may prove extremely valuable when highly pure preparation of biMAbs is required, as for in vivo use.     

Comparative molecular field analysis study of stilbene derivatives active against A549 lung carcinoma

A series of 43 stilbene derivatives that showed cytotoxicity against human lung carcinoma (A549) was analyzed using comparative molecular field analysis (CoMFA) for defining the hypothetic pharmacophore model. The polyoxylated stilbenes were found to be active inhibitors of tubulin polymerization. Several cis-stilbenes are structurally similar to combretastatins. However, the trans-stilbenes are assumed to be close to resveratrol found in grapes and have been reported to be potential cancer chemopreventive agents by modulating the initiation, promotion, and progression of the carcinogenic process. With several synthesized compounds that were evaluated for antitumor cytotoxicity against human lung tumor cells (A549), the stilbene derivatives were subjected to CoMFA. To perform systematic molecular modeling of these compounds, a conformational search was carried out based on the precise dihedral angle analysis of the lead compound (1p). The X-ray crystallographic structure of combretastatin A-1 was also used for defining the active conformers of the compounds. After determining the energy-minimized conformers of the lead compound (1p), CoMFA was performed using five different alignments. The three dimensional (3D)-quantitative structure-activity relationship study resulted in reasonable cross-validated, conventional r(2) values equal to 0.640 and 0.958, respectively.     

High-sensitive fluorescent DNA sequencing and its application for detection and mass-screening of point mutations.

We describe a rapid and sensitive DNA sequencing method for an automated fluorescent DNA sequencer (AFDS) and its application for detection of point mutations. The method is based on an improved cycle sequencing procedure in which only 10-50 fmol of template DNA is required. Furthermore, it is able to use crude DNA preparation as a template as well as the purified one. Thus, the improved method provided a simplified procedure for sequencing of various types of DNA, including cosmid DNA, in which purification steps were unnecessary. We also developed a novel system for detection of point mutations using AFDS. A set of four lanes is used for the parallel analysis of single-base profiles of four different samples, instead of for the four-base profile of a sample. The AFDS exhibits the base profiles of the samples with four different colors in the analyzed data, which enables us to identify a mutation as an additional peak with a color specific for the lane. The feasibility of our system was tested by analyzing polymerase chain reaction (PCR)-amplified genomic DNAs from four individuals including a carrier of a mutation of C to T. The mutation was clearly identified as an additional "T" peak of a color specific for the carrier. The mutation was also detectable even if 16 individuals including the carrier were simultaneously analyzed on a set of four lanes (four individual samples for each lane). Thus, the novel system is useful for simultaneous detection of mutations in a large number of individual samples.