Thermal Analysis of Cobalt(II) Salts with some Carboxylic Acids

The thermal analysis of CoC₂O₄·2H₂O, Co(HCOO)₂·2H₂O and Co(CH₃COO)₂·4H₂O was carried out with simultaneous TG-DTG-DTA measurements under non-isothermal conditions in air and argon atmospheres. The intermediates and the end products of decomposition were characterised by X-ray diffraction and IR and UV-VIS spectroscopy. The decomposition of the studied compounds occur in several stages. The first stage of dissociation of each compound is dehydration both in air and argon. The next stages differ in air and argon. The final product of the decomposition of each compound in air is Co₃O₄. In argon it is a mixture of Co and CoO for cobalt(II) oxalate and cobalt(II) formate but CoO for cobalt(II) acetate. This revised version was published online in August 2006 with corrections to the Cover Date.     

TG and DTA Evaluation of Cobalt Salts and Complexes Mixed with Activated Carbon

The thermal decomposition process of mixtures of CoC₂O₄⋅2H₂O (COD) or Co(HCOO)₂⋅2H₂O (CFD) or [Co(NH₃)₆]₂(C₂O₄)₃⋅4H₂O (HACOT) with activated carbon was studied with simultaneous TG–DTG–DTA measurements under non-isothermal conditions in argon and argon/oxygen admixtures. The results show that the thermal decomposition of the studied mixtures in Ar proceeds in the same manner. It begins with the salt decomposition to Co_met+CoO mixture followed by (T>680 K) the simultaneous reduction of CoO to Co_metand carbon degasification. The final product of the thermal decomposition of COD-C and CFD-C mixtures, identified by XRD, is β-Co. Cobalt contents determined in the final products fall in the range 71–78 mass%. The rest is amorphous residual carbon. In Ar/O₂ admixtures the end product is Co₃O₄ with ash admixture. This revised version was published online in July 2006 with corrections to the Cover Date.     

The non-isothermal decomposition of cobalt acetate tetrahydrate

The non-isothermal decomposition of cobalt acetate tetrahydrate was studied up to 500°C by means of TG, DTG, DTA and DSC techniques in different atmospheres of N₂, H₂ and in air. The complete course of the decomposition is described on the basis of six thermal events. Two intermediate compounds (i.e. acetyl cobalt acetate and cobalt acetate hydroxide) were found to participate in the decomposition reaction. IR spectroscopy, mass spectrometry and X-ray diffraction analysis were used to identify the solid products of calcination at different temperatures and in different atmospheres. CoO was identified as the final solid product in N₂, and Co₃O₄ was produced in air. A hydrogen atmosphere, on the other hand, produces cobalt metal. Scanning electron microscopy was used to investigate the solid decomposition products at different stages of the reaction. Identification of the volatile gaseous products (in nitrogen and in oxygen) was performed using gas chromatography. The main products were: acetone, acetic acid, CO₂ and acetaldehyde. The proportions of these products varied with the decomposition temperature and the prevailing atmosphere. Kinetic parameters (e.g.E and lnA) together with thermodynamic functions (e.g. °H, C _p and °S) were calculated for the different decomposition steps. In celebration of the 60^th birthday of Dr. Andrew K. Galwey     

Non-isothermal Studies on Mechanism And Kinetics of Thermal Decomposition of Cobalt(II) Oxalate Dihydrate

Thermal decomposition of CoC₂O₄⋅2H₂O was studied using DTA, TG, QMS and XRD techniques. It was shown that decomposition generally occurs in two steps: dehydration to anhydrous oxalate and next decomposition to Co and to CoO in two parallel reactions. Two parallel reactions were distinguished using mass spectra data of gaseous products of decomposition. Both reactions run according toAvrami–Erofeev equation. For reaction going to metallic cobalt parameter n=2 and activation energy is 97±14 kJ mol^–1. It was found that decomposition to CoO proceeds in two stages. First stage (0.12<α_II<0.41) proceeds according to n=2, with activation energy 251±15 kJ mol^–1 and second stage (0.45<α_II<0.85) proceeds according to parameter n=1 and activation energy 203±21 kJ mol^–1. This revised version was published online in August 2006 with corrections to the Cover Date.     

Thermal decomposition of [Co(NH3)6]2(C2O4)3·4H2O: II. Identification of the gaseous products

The main goal of the presented work was to verify the previously assumed decomposition stages of [Co(NH₃)₆]₂(C₂O₄)₃·4H₂O (HACOT) [Thermochim. Acta 354 (2000) 45] under different atmospheres (inert, oxidising and reducing). The gaseous products of the decomposition were qualitatively and quantitatively analysed by mass spectrometry (MS) and Fourier-transformed infrared spectroscopy (FT-IR). It was confirmed that the gaseous products of HACOT decomposition under studied atmospheres there were H₂O (stage I) and NH₃, CO₂ (stage II). The main gaseous products in the third stage in argon and hydrogen (20 vol.% H₂/Ar) were CO and CO₂, whereas in air (20 vol.% O₂/Ar) only CO₂ was identified. Under the oxidising as well as reducing atmospheres the influence of secondary reactions on the composition of both, solid and gaseous products was found particularly strong during the third stage of the process. The studies of the multistage decomposition of HACOT, additionally complicated by many secondary reactions, required application of the hyphenated TA-MS or TA-FT-IR techniques combined with the pulse thermal analysis PTA^® allowing quantification of the spectroscopic signals and investigation of gas-solid and gas-gas reactions in situ.     

Peculiarities of polythermic decomposition of iron,cobalt and nickel oxalates within pores of photonic crystals based on SiO<Subscript>2</Subscript> in atmosphere with oxygen lack

Iron(II), cobalt(II) and nickel(II) oxalates were synthesized as nanofractals inside the voids of the photonic crystals based on SiO₂. Guest substances undergone polythermic decomposition within the pores of the photonic crystals in helium atmosphere containing of oxygen traces (∼1 Pa) under static conditions. Pyrolysis of Fe(COO)₂·2H₂O, Co(COO)₂·2H₂O and Ni(COO)₂·2H₂O studied by TG and DSC techniques results in the formation of the metal oxides. The nanoparticles of Fe₂O₃, CoO (Co₃O₄) and NiO populated the interspheric voids of the photonic crystals exhibited no ferromagnetic effects indicating that no metallic inclusions were formed in helium in the presence of O₂ traces. The exothermic effect was observed by the thermal decomposition of the cobalt(II) oxalate only under oxygen lack.     

Reactions of 1,1,3,3-tetramethyldisilazane with dicobalt octacarbonyl and iron pentacarbonyl. Thermal decomposition of the cobalt and iron carbonyl silazane complexes

The reaction of (HMe₂Si)₂NH with Co₂(CO)₈ gives the complex [Co₂(CO)₇(SiMe₂)₂NH₂]⁺[Co(CO)₄]⁻. Its thermal decomposition starts with dissociation into the “acid” HCo(CO)₄ and the “base” Co₂(CO)₇(SiMe₂)₂NH. After that, the base and the initial complex decompose further under the action of HCo(CO)₄. The final products of this reaction are CO, NH₃, Co, volatile dimethylcyclosilazane, and a solid residue consisting of cobalt particles encapsulated into a polymethylsiloxane matrix and possessing properties of mixed para- and ferromagnetics with an ultimate specific magnetization of 64–74 G g⁻¹. Tetramethyldisilazane reacts with iron pentacarbonyl under UV irradiation to give relatively stable 1,3-bis(tetracarbonylthydrideiron)-1,1,3,3-tetramethyldisilazane. This product contains Fe−H…N hydrogen bonds, which stabilize it against dehydrogenation and cyclization to diironcyclodisilazane. Thermal decomposition of this product was investigated. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2537–2544, December, 1998.     

Kinetics and mechanism of the thermal decomposition of barium titanyl oxalate

Thermal analysis of barium titanyl oxalate reveals that the decomposition proceeds through four distinct rate processes. Among them, the decomposition of oxalate occurs in the temperature range 230–350°C, and has been studied by TG and gas pressure measurements, supplemented by IR spectroscopy, electron microscopy and chemical analysis. Oxalate decomposition proceeds differently in vacuum and in flowing gas atmospheres. Analytical results indicate the formation of a complex carbonate together with CO, CO₂ and water vapour below 400°C. Schemes for each type of decomposition are proposed and discussed. For decomposition in vacuum, kinetic observations fitted the three-dimensional, diffusion controlled, rate equation for almost the entire α-range (0.028≤α≤0.92). The activation energy is calculated to be3 189±6 kJ mol⁻¹. In celebration of the 60^th birthday of Dr. Andrew K. Galwey     

Thermal decomposition of cadmium succinate dihydrate

Thermal decomposition of cadmium succinate dihydrate, CdC₄H₄O₄·2H₂O, was studied in dynamic helium and air atmospheres by means of simultaneous TG, DTA and MS analysis. It was found that dehydration of CdC₄H₄O₄·2H₂O takes place in the temperature range 80–165°C and at low heating rates formation of monohydrate was stated. The anhydrous cadmium succinate decomposes at about 350°C to metallic cadmium. The gaseous products of cadmium succinate decomposition are CO₂ and H₂O. Formation of small amounts of 3-phenylpropanal and 1,7-octadiene during decomposition in helium was revealed. In helium cadmium evaporates at the temperature of decomposition and the residue consists of small amount of elementary carbon formed in result of pyrolysis of succinate groups. In air cadmium oxidizes and the final solid product of decomposition is CdO.     

Mechanism of thermal decomposition of thiourea derivatives

The thermal decomposition of a series of compounds has been studied by thermogravimetry, mass spectrometry, nuclear magnetic resonance and elemental analysis. The combined use of mass spectrometry and thermogravimetry (MS and TG) in the analysis of these compounds has allowed characterization of the fragmentation pattern which was the objective of this research. The gaseous products, volatile condensed products and solid residues were identified by NMR and MS. Based on the product of thermal decomposition, the mechanism of thermal decomposition has been derived.     

Mechanism of the decomposition of cobaltous compounds in vacuo

The decomposition of cobaltous compounds (nitrate, hydroxide, carbonate, oxalate and oxyhydroxide) in vacuo has been investigated by magnetic methods and thermogravimetry. The mechanism is shown to be similar to that in air and begins with the formation of Co³⁺ ions in octahedral coordination. The formation of different final products (Co₃O₄, CoO and Co) has been attributed to the nature of the initial cobaltous compound. The results are in agreement with thermodynamic calculations.     

Thermal decomposition of basic cobalt and copper carbonates

Basic cobalt and copper carbonates were prepared by precipitation from solutions of their nitrates using KHCO₃ at room temperature in CO₂ atmosphere. The thermal decomposition of the prepared basic carbonates was studied by means of TG and DTA techniques and the phases produced were identified by XRD measurements. The products obtained at 400C were subjected to different doses of gamma-rays (40–160 M rad) and the thermal stabilities of these solids were investigated.The results obtained revealed that basic cobalt carbonate decomposed at 335C to produce Co₃O₄ which remained stable up to 850 and then decomposed above this temperature giving CoO which transformed into Co₃O₄ on cooling to room temperature. Basic copper carbonate dissociated at 290C yielding CuO which yielded Cu₂O and metallic copper at 1060 and 1150C, respectively. However, the produced cuprous oxide and metallic copper solids were converted into CuO and CU₂O, respectively by cooling in air to room temperature.Gamma-irradiation decreased the thermal stability of Co₃O₄ to an extent proportional to the dose employed. On the other hand, this treatment increased the thermal stability of both CuO and Cu₂O.     

Thermische Analyse eines chloridhaltigen basischen Cobaltcarbonates

The thermal decomposition of a chloride and water-containing basic cobalt carbonate was studied. As a first step, crystal water is lost without change of structure. The following decomposition steps overlap and proceed in different ways, depending on the atmosphere over the sample: under nitrogen, chloride volatilizes as HCl and CoCl₂; in air, oxidation occurs. CoO and Co₃O₄, respectively, are the final solid products at 700–800°.     

Application of coupled TG-FTIR system in studies of thermal stability of manganese(II) complexes with amino acids.

Detailed thermal analysis of manganese(II) complexes with a-amino acids were carried out. The thermal degradation is multi-stage. Dehydration of complexes is the first mass loss step. Anhydrous compounds are unstable and decompose to Mn₃O₄ in air or to MnO in inert atmosphere. The intermediate solid products were identified by TG method and TG/FTIR combined technique. Among others solid residues, the presence of MnSO₄, MnBr₂ and Mn(CH₃COO)Cl was found. In the gaseous products of decomposition of organic ligand H₂O, NH₃, CO₂, CO, aromatic and non-aromatic hydrocarbons and very probably cyanoacetic acid and dimethyl sulfide occurred. Inorganic ions, i.e. Cl^-, Br^-or So₄ ^2-remain in the solid products of decomposition or are lost as HCl, HBr or SO₂. This revised version was published online in July 2006 with corrections to the Cover Date.     

Thermal properties of zinc(II) chloroacetate and its complexes with nicotinamide and caffeine

Thermal decompositions of zinc(II) chloroacetate and its complexes with nicotinamide and caffeine were studied by means of TG/DTG, DTA, IR and mass spectroscopy. Thermal analysis showed that presence of the halogen significantly influenced the thermal decomposition. Decompositions may be characterized as two step reactions (release of nicotinamide or caffeine followed by pyrolysis of the carboxylate anion). Zinc chloride, CO, CO₂, CH₂O, ClCH₂CHO were found in gaseous products of the thermal decomposition.     

The Roles of Composition and Mesostructure of Cobalt-Based Spinel Catalysts in Oxygen Evolution Reactions

By using the crystalline precursor decomposition approach and direct co-precipitation the composition and mesostructure of cobalt-based spinels can be controlled. A systematic substitution of cobalt with redox-active iron and redox-inactive magnesium and aluminum in a cobalt spinel with anisotropic particle morphology with a preferred 111 surface termination is presented, resulting in a substitution series including Co₃O₄, MgCo₂O₄, Co₂FeO₄, Co₂AlO₄ and CoFe₂O₄. The role of redox pairs in the spinels is investigated in chemical water oxidation by using ceric ammonium nitrate (CAN test), electrochemical oxygen evolution reaction (OER) and H₂O₂ decomposition. Studying the effect of dominant surface termination, isotropic Co₃O₄ and CoFe₂O₄ catalysts with more or less spherical particles are compared to their anisotropic analogues. For CAN-test and OER, Co³⁺ plays the major role for high activity. In H₂O₂ decomposition, Co²⁺ reveals itself to be of major importance. Redox active cations in the structure enhance the catalytic activity in all reactions. A benefit of a predominant 111 surface termination depends on the cobalt oxidation state in the as-prepared catalysts and the investigated reaction.     

Mechanism of thermal decomposition of cobalt acetate tetrahydrate

The thermal decomposition of cobalt acetate tetrahydrate (Co(CH₃COO)₂ · 4H₂O) has been studied via thermogravimetric (TG) analysis, in situ X-ray powder diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR). The results of TG and XRD showed that the parent salt melted and then the dissolved crystalline water was vaporized in two steps. The dehydration process was followed by a major step concerning the decomposition of the acetate group, leading to basic acetate as an intermediate, which then produced CoO and Co in N₂ and H₂ atmosphere, respectively. Three decomposition intermediates Co(CH₃COO)₂ · 0.5H₂O, Co(CH₃COO)₂, and Co(OH)(CH₃COO) were presumed. In situ XRD experiments revealed that the intermediate basic acetate was poorly crystallized or even amorphous. Evolved gases analysis indicated that the volatile products of acetate decomposition were water vapor, acetic acid, ethylenone, acetone, and CO₂. A detailed thermal decomposition mechanism of Co(CH₃COO)₂ · 4H₂O was discussed.     

Effect of Li2O-doping on the thermal stability of cobaltic oxide

The influence of lithium oxide-doping on the thermal stability of Co₃O₄ was studied using DTA, TG, DTG and X-ray diffraction techniques. Pure and doped cobaltic oxide specimens were prepared by thermal decomposition of pure basic cobalt carbonate and the basic carbonate mixed with different proportions of LiOH, in air, at different temperatures between 500 and 1100°C.Pure Co₃O₄ was found to start partial decomposition when heated in air at 830°C yielding the CoO phase. The complete decomposition was effected by heating at 1000°C.Doping of Co₃O₄ with different proportions of Li₂O was found to much increase its thermal stability. The temperatures at which the doped oxide samples started to undergo decomposition were increased to 865, 910 and 1050°C for 0.375, 0.75 and 3% Li₂O-doped solids, respectively. The DTA revealed that the 1.5% Li₂O-doped cobaltic oxide did not undergo any thermal decomposition till 1080°C. The X-ray investigation showed that the prolonged heating of 1.5 and 3% Li₂O-doped solids at 1100°C for 36 h effected only a partial decomposition of Co₃O₄ into CoO. Heating of these solids at temperatures varying between 900 and 1100°C led also to the formation of a new lithium oxide cobaltic oxide phase, the composition of which has not yet been identified.The role of Li₂O in increasing the thermal stability of Co₃O₄ was attributed to the substitution of some of its cobalt ions by Li⁺ ions, according to Verwey and De Boer's mechanism, leading to the transformation of some of the Co²⁺ into Co³⁺ ions thus increasing the oxidation state of the cobaltic oxide lattice.     

Co/AlPO4-5催化剂中Co的状态及其作用

本文用IR,TEM,FABMS,ESCA,XRD以及还原度的测定等方法,描述了Co/AlPO_4-5上Co_3O_4在氢作用下变成Co°,CoO以及未还原的Co_3O_4三种状态的还原过程和钴的颗粒分布的变化,并表明在还原过程中,可能有钴的簇状物生成,导致B酸形成。     

Mechanism of the thermal decomposition of nitrates from graphite furnace mass spectrometry studies

A basically new mechanism of the thermal decomposition of solids is proposed to explain the mass spectral observations of gaseous molecules of CoO, CuO, Cu₂O, NiO, PbO and Mg(OH)₂ during the low-temperature decomposition of the anhydrous and hydrated nitrates of these metals. The mechanism consists of two stages: congruent gasification of all reaction products irrespective of their saturated vapor pressure and subsequent condensation of the low-volatility species (oxides and hydroxides). The partial pressures of these species at the appearance temperatures calculated from this theory for the first stage of the process (1–50 mPa) are in agreement with the detection limits of the quadrupole mass spectrometers used in these experiments. The proposed mechanism is supported by other available data obtained by thermal analysis.