Direct electron transfer of hemoglobin founded on electron tunneling of CTAB monolayer

Direct electron transfer and stable adsorption of hemoglobin (Hb) on a carbon paste (CP) electrode were achieved with the aid of a single-chain cationic surfactant, namely, cetyltrimethylammonium bromide (CTAB). Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) indicated that CTAB could form a complete monolayer with a high density of positive charges on the surface of the CP electrode, which strongly adsorbed negatively charged protein molecules via electrostatic interactions. The surfactant molecules anchored the protein molecules to align in suitable orientations and acted as electron-tunneling pathways between the protein molecules and the CP electrode. The bioelectrocatalytic activity of the immobilized Hb was confirmed by RAIR and UV-vis spectroscopies, and rapid electrochemical responses to the reduction of oxygen (O2), hydrogen peroxide (H2O2), and nitrite (NO2-) were also obtained.     

Effect of cetyltrimethylammonium bromide addition on the emulsions stabilized by montmorillonite

The wettability of montmorillonite could be in situ modified by cationic surfactant cetyltrimethylammonium bromide (CTAB). The type and stability of emulsions prepared from montmorillonite with different concentrations of cationic surfactant were investigated, and a double phase inversion of emulsions was observed. The adsorption of CTAB on montmorillonite particles was studied by surface tension and zeta potential measurements, and the variation of the wettability of particles with the concentration of CTAB was characterized by the contact angle measurements. The adsorption of particles at the surface of emulsion droplets was observed by laser-induced confocal scanning microscopy. At low surfactant concentrations, the adsorption of CTAB on montmorillonite increased the hydrophobicity of the particles, and the stability of oil-in-water emulsions was enhanced. With the increase of the CTAB concentration, montmorillonite particles changed from hydrophilic to hydrophobic, and water-in-oil emulsions were obtained. However, at higher surfactant concentrations, the emulsions inverts to O/W again because montmorillonite particles were reconverted into hydrophilic due to the formation of CTAB bilayer on the surface of montmorillonite.     

Effect of surfactants on the rate of solid-liquid mass transfer with gas generation at the interface

The effect of Triton X-100 (nonionic surfactant) and cetyltrimethylammonium bromide (CTAB), cationic surfactant, on the mass transfer coefficient of the cathodic reduction of ferricyanide ions and anodic oxidation of ferrocyanide ions at hydrogen- and oxygen-evolving electrodes, respectively, was studied. It was found that the limiting current decreases by amounts ranging from 26.67 to 54.67% for Triton X-100 and from 20 to 46.0% for CTAB in the case of cathodic reduction of ferricyanide ions under natural convection at H2-evolving electrodes and from 23.81 to 51.43% for Triton X-100 and from 18.10 to 40.95% for CTAB in the case of anodic oxidation of ferrocyanide ions under natural convection at O2-evolving electrodes, depending on the concentration of surfactant. Also the effects of Triton X-100 and CTAB on the gas hold-up and cell voltage were studied. The presence of surfactant in electrolytes was found to decrease the mass transfer coefficient by an amount ranging from 5.37 to 95.9%, depending on the operating conditions. Gas hold-up, cell voltage, and power consumption were found to increase in the presence of surfactant.     

Effects of a Surfactant on the Electrocatalytic Activity of Cobalt Hexacyanoferrate Modified Glassy Carbon Electrode Towards the Oxidation of Dopamine

The cobalt hexacyanoferrate film (CoHCF) was deposited on the surface of a glassy carbon (GC) electrode with a potential cycling procedure in the presence and absence of the cationic surfactant, cetyl trimethylammonium bromide (CTAB), to form CoHCF modified GC (CoHCF/GC) electrode. It was found that CTAB would affect the growth of the CoHCF film, the electrochemical behavior of the CoHCF film and the electrocatalytic activity of the CoHCF/GC electrode towards the electrochemical oxidation of dopamine (DA). The reasons of the electrochemical behavior of CoHCF/GC electrode influenced by CTAB were investigated using FTIR and scanning electron microscope (SEM) techniques. The apparent rate constant of electrocatalytic oxidation of DA catalyzed by CoHCF was determined using the rotating disk electrode measurements.     

Electrochemical reduction of p-nitrosodiphenylamine in, a cationic micellar system

The electroreduction of p-nitrosodiphenylamine (p-NDPA) in an alkaline aqueous solution containing cetyltrimethylammonium bromide (CTAB) as a cationic surfactant was investigated by polarography, cyclic and rotating disc voltammetry. It was found that the reduction of p-NDPA in cationic micellar systems takes place by the ECE mechanism, and, compared to the reduction of the same compound in a homogeneous water solution, has a somewhat lower rate of the overall electrode reaction. The lower reaction rate of p-NDPA reduction in micellar medium is probably due to three main factors: solubilization of p-NDPA in CTAB micelles, adsorption of monomeric surfactant species at the electrode surface and a lower rate of the base catalyzed dehydration reaction (C-step) in the micellar system.     

Nonenzymatic dopamine biosensor based on tannin nanocomposite

A dopamine (DA) biosensor was developed based on polypyrrole/tannin/cetyltrimethylammonium bromide (PPy/TA/CTAB) nanocomposite and central composite rotatable design (CCRD) was employed for the optimization of conditions. Chemical polymerization of the PPy/TA in the presence of a cationic surfactant, CTAB, reduced the particle size of composite and a rod-like structure with a lumpy surface and high porosity was observed for nanocomposite justifying the highest current response for the modified electrode. Amperometry and differential pulse voltammetry analyses were applied for all electrochemical measurements and DA detection in the range of 0.5–100 μM. The good adhesion of nanocomposite on the electrode surface, as well as porosity and high surface area of the modified electrode, enhanced the diffusion of DA molecules inside the matrix. Amperometry analysis of the Screen printed carbon electrode/PPy/TA/CTAB modified electrode displayed a good sensitivity of 0.039 μA (μM)⁻¹ toward DA with the limit of detection of 2.9 × 10^–7 M. The modified biosensor also excludes the interfering species of ascorbic acid and uric acid which makes this sensor appropriate for DA determination. The proposed biosensor showed an acceptable reproducibility and repeatability with low relative standard deviations of 4.8% and 4.4%, respectively.     

Pt/十六烷基三甲基溴化铵纳米聚集体修饰玻碳电极促进析氢(英文)

A novel, cost‐effective, and simple electrocatalyst based on a Pt‐modified glassy carbon electrode (GCE), using cetyltrimethylammonium bromide (CTAB) as a cationic surfactant, is reported. Am‐phiphilic CTAB molecules were adsorbed on GCE by immersion in a CTAB solution. The positively charged hydrophilic layer, which consisted of small aggregates of average size less than 100 nm, was used for accumulation and complexation of [PtCl6]2? anions by immersing the electrode in K2PtCl6 solution. The modified electrode was characterized using scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, impedance spectroscopy, and electrochemical methods. The electrocatalytic activity of the Pt particles in the hydrogen evolution reaction (HER) was investigat‐ed. The results show that the CTAB surfactant enhances the electrocatalytic activity of the Pt parti‐cles in the HER in acidic solution.     

High sensitivity voltammetric determination of sodium nitroprusside at acetylene black electrode in the presence of CTAB

A sensitive electroanalytical method for detection of sodium nitroprusside (SNP) was investigated, on the basis of the enhanced electrochemical response of SNP at an acetylene black electrode (ABE) in the presence of cetyltrimethylammonium bromide (CTAB). Voltammetric studies showed that SNP exhibited a pair of quasi-reversible redox peaks at ABE in the presence of CTAB while no any redox peak was observed in the absence of CTAB. This was attributed to the enhanced adsorption of SNP at AB through electrostatic interactions between SNP and CTAB as well as hydrophobic adsorption of CTAB at the hydrophobic surface of ABE. Under optimal working conditions, the reduction current was proportional to the concentration of SNP in the range of 1.0x10(-7) to 1.0x10(-5) mol/L and 1.0x10(-5) to 1.0x10(-2) mol/L. A low detection limit of 5.0x10(-9) mol/L was obtained for 2 min accumulation at open circuit (S/N=3). The proposed method was successfully applied to the determination of SNP in pharmaceutical dosage forms.     

Au(111)电极上CTAB吸脱附过程的循环伏安研究

本文运用循环伏安方法研究十六烷基三甲基溴化铵(CTAB)在Au(111)电极上的吸附行为. 首次给出CTAB在Au(111)电极上的循环伏安曲线,其0.18 V、0.27 V有两对可逆的特征电流尖峰,均受扩散控制,且与卤素离子种类有关. 研究表明,烷基铵阳离子的吸脱附及吸附层相转变与Au(111)电极表面结构密切相关.     

Enhancing the electrochemiluminescence of tris(2,2'-bipyridyl)ruthenium(II) by ionic surfactants

The dependence of the electrochemiluminescence of Ru(bpy)3(2+) (bpy = 2,2'-bipyridine) with tri-n-propylamine as co-reactant on the anionic surfactant SDS (sodium dodecyl sulfate) and the cationic surfactants CTAX (CTA = cetyltrimethylammonium cation, X = bromide, chloride and hydrogensulfate) was studied. Both SDS and CTAX, at low surfactant concentrations below the critical micelle concentrations, enhance the electrochemiluminescence at a platinum working electrode. A further enhancement of the light emission intensity by bromide ions was observed when CTAB (B = bromide) was used-an overall 30-fold increase in electrochemiluminescence efficiency was obtained at a CTAB concentration of 0.08 mM. Voltammetric data support adsorption of surfactant molecules on the electrode surface as the cause of the enhancement of electrochemiluminescence by ionic surfactants.     

The influence of cetyltrimethyl ammonium bromide on electrochemical properties of thyroxine reduction at carbon nanotubes modified electrode

The effect of cetyltrimethyl ammonium bromide (CTAB) on the electrochemical behaviors of thyroxine at a glassy carbon electrode (GCE) modified with single-walled carbon nanotubes (SWNTs) was investigated. At the SWNTs film-coated GCE, a well-defined oxidation peak of thyroxine at 0.78 V was obtained, but the reduction peak of thyroxine was indiscernible. When trace CTAB was added to the working solution, the reduction current could be greatly enhanced and the oxidation current remained stable. The reaction mechanisms for the reduction of thyroxine were explored by chronocoulometry. Thyroxine might form particular ion complex with CTAB via the interaction between iodine atoms on thyroxine and bromide ions in CTAB, which made the concentration of thyroxine at the surface of the modified electrode increased and the electron transfer rate enhanced. The proper mechanisms for the enhanced reduction of thyroxine in the present of CTAB were explored by several electrochemical techniques including cycle voltammetry linear sweep voltammetry and others. It was concluded that the special interactions between the thyroxine CTAB and SWNTs resulted in the increase of the reduction peak current. All results indicated that two iodine atoms on the thyroxine and four electrons were involved the reduction process which was irreversible and two iodine ions produced. In this system, the sensitive reduction peak of thyroxine at 0.3 V was employed to determine thyroxine and a low detection limit of 2x10(-8) mol/L was obtained for 2 min accumulation at 0.9 V. The SWNTs coated GCE had good stability and reproducibility.     

γ-Oryzanol-loaded calcium pectinate microparticles reinforced with chitosan: Optimization and release characteristics

The cationic surfactant, cetyltrimethyl ammonium bromide (CTAB) effect on accurate determination of dopamine in the presence of ascorbic acid (as natural obtrusive in determination of dopamine) using chemically modified electrode based on tin hexacyanoferrate (SnHCF) as a modifier at carbon paste electrode (CPE) is described. The electrochemical response of bare CPE and SnHCF modified electrode (ME) examined in different pHs, in absence and presence of different concentration of dopamine (DA) and ascorbic acid (AA). In addition a simple and reliable method for simultaneous electrochemical determination of AA and DA was presented. It was based on the use of the cationic surfactant CTAB that enables the separation of the oxidation peaks potential of AA and DA. The experimental results showed that DA and AA have two separate peaks. In pH 3 and at presence of 3 mM of CTAB the separation of DA and AA peaks and the eminence of them increased evidently. Good linear response to AA and DA was observed in the range of 0.4–50 and 0.2–25 mM with the correlation of 0.9912 and 0.9955, respectively.     

Mechanism of oxidation of 1-benzyl-1,4-dihydronicotinamide by the biologically active p-benzoquinone derivative, avarone, in a cationic micellar medium: An electrochemical approach

The electrochemical reduction of avarone (Q), an antitumor sesquiterpenoid quinone, was investigated at various pH in aqueous ethanol containing a cationic surfactant, cetyltrimethylammonium bromide (CTAB) by cyclic and rotating disc electrode voltammetry, using a glassy carbon electrode. Comparison of the electrochemical reduction of Q in presence of CTAB with the same process in a homogeneous water + ethanol solution shows an anodic shift of the reduction potential in the presence of CTAB; at pH > 9.5 and in presence of CTAB, two well-defined reduction peaks are observed, thus confirming one-electron reduction of Q, whereby the intermediate radical-anion is stabilized by the cationic micellar medium. The electrochemical oxidation of BNAH was investigated by cyclic voltammetry, and the anodic shift of the peak potential in presence of CTAB was observed. From the electrochemical behaviour of Q and BNAH, and the kinetics of the oxidation of BNAH with Q, it is suggested that the reaction takes place in two successive one-electron transfer steps. The application of the Marcus theory gives additional proof that, in this case, the first electron transfer is the rate determining step.     

Aqueous Electrochemistry of Anthraquinone and Its Correlation with the Dissolved States of a Cationic Surfactant

Cyclic voltammetry was employed to study the electrochemical behavior of anthraquinone (AQ) in aqueous solution at a glassy carbon electrode using the sodium salt of anthraquinone-2-sulphonic acid (AQS). The cyclic voltammograms show a reduction wave and a corresponding oxidation wave. The electrochemical reaction of AQ in aqueous solution involves a two electron transfer process followed by a coupled chemical reaction and exhibits strong pH dependence at low pH (<4). A satellite peak is also observed at the cathodic side of the reduction wave for the reduction of the sulfonate group of AQS. The electrochemical investigation was also carried out in the presence of a cationic surfactant, cetyltrimethylammonium bromide (CTAB). Similar redox behavior can be observed for the electrochemical reaction of AQS in the presence of CTAB solutions similar to the aqueous media. The electrochemical responses have been found to depend on the dissolved states of the surfactant. The current-potential behavior of AQS depends on the concentration of CTAB and micellization has a profound effect on the electrochemical behavior of AQ.     

基于表面活性剂单分子层修饰碳糊电极的一氧化氮电化学传感器及其应用

报道了一种表面活性剂单分子层修饰碳糊电极,并用于NO的高灵敏电化学检测。研究表明,表面活性剂通过烷基链在电极表面形成的疏水性单分子层微环境对NO的电化学响应具有较好的促进作用。其中,阳离子表面活性剂十六烷基三甲基溴化铵(CTAB)对NO的电化学氧化表现出最强的催化活性和增敏作用。在Nafion膜覆盖的CTAB修饰碳糊电极上,NO的安培响应与其浓度在3.6×10-8～1.8×10-5mol/L范围内呈良好的线性关系,检出限为1.8×10-8mol/L。该电极作为低成本、高灵敏的NO电化学传感器,被成功应用于大鼠肺组织细胞中NO释放的实时监测。     

CTAB-promoted prussian blue-modified electrode and its cation transport characteristics for K+, Na+, Li+, and NH4+ ions

A Prussian blue (PB) film was deposited on a glassy carbon (GC) electrode by cyclic voltammetry in the presence of the cationic surfactant cetyltrimethylammonium bromide (CTAB). The electrode thus formed showed 4-fold enhancements in redox current and charge values in pure KCl electrolyte as well as greater stability than an electrode prepared in the absence of CTAB. This improved performance of a PB+CTAB electrode versus a PB electrode was further demonstrated using SEM, XRD, and electrochemical impedance spectroscopy (EIS) measurements. A comparative study was undertaken on the cation transport characteristics of PB and PB+CTAB electrodes for Na+, Li+, and NH4+ ions. We obtained a CV pattern for a CTAB-promoted PB film, which showed ideal Nernstian behavior at all scan rates from 5 to 140 mV s(-1). Conditions for the formation and preservation of these ideal and stable PB films are discussed. Possible mechanisms for the beneficial effects of CTAB are proposed.     

Electrochemical behavior of phenol at acetylene black-dihexadecyl hydrogen phosphate composite modified glassy carbon electrode in the presence of cetyltrimethylammonium bromide

The electrochemical response of phenol at acetylene black (AB)-dihexadecyl hydrogen phosphate (DHP) composite modified glassy carbon electrode in the presence of cetyltrimethylammonium bromide (CTAB) was investigated. In this system, a sensitive oxidation peak at 0.62 V (SCE) was obtained. The electrode process and the influence of CTAB on the oxidation of phenol were explored by chronocoulometry and linear sweep voltammetry (LSV). Experimental conditions for the determination of phenol were optimized. In the range of 5.0 × 10⁻⁷ to 1.2 × 10⁻⁵ M, the phenol concentration was linear with the oxidation peak current and the detection limit was found to be 1.0 × 10⁻⁷ M for 3 min accumulation. The method was applied for the determination of phenol in lake water and the results were satisfactory. Published in Russian in Elektrokhimiya, 2008, Vol. 44, No. 2, pp. 222–229. The text was submitted by the authors in English.     

Modified carbon paste sensor for cetyltrimethylammonium ion based on its ion-associate with tetrachloropalladate(II).

A comparative study was made between developed chemically modified carbon paste electrodes and PVC membrane electrodes for the cationic surfactant cetyltrimethylammonium bromide (CTAB). The carbon paste electrode modified with cetyltrimethylammonium-tetrachloropalladate(II) (CTA-TClP) provides a more sensitive and stable device than that shown by electrodes with an inner reference solution. The best performance was obtained by an electrode based on the paste containing 3.6 wt% CTA-TCIP, 1.8 wt% ethylhexadecyldimethylammonium bromide, 37.6 wt% graphite and 57 wt% tricresyl phosphate. The sensor exhibited a Nernstian response for CTAB over a wide concentration range of 3.5 x 10(-7) to 1.0 x 10(-3) M with a detection limit of 2.0 x 10(-7) M between pH 2.7 and 8.2 with a fast response time of 相似文献   

Comparative study on the interaction of DNA with three different kinds of surfactants and the formation of multilayer films

The interactions between double-stranded DNA (dsDNA) and three different kinds of surfactants, i.e., cationic, anionic, and nonionic surfactants, were investigated by cyclic voltammetry, electrochemical impedance spectroscopy and UV-vis spectroscopy. Multilayer films composed of DNA and surfactants were prepared at gold electrode by electrostatic or hydrophobic interactions. It was found that the cationic surfactant, CTAB, can bind to DNA by electrostatic interaction, and the electron transfer resistance of CTAB-DNA complex film increases first and then decreases with CTAB concentration. The anionic surfactant, LAS, can bind to DNA but by hydrophobic interaction, and the electron transfer resistance of the complex film keeps decreasing with LAS concentration. Nonionic surfactants can also directly bind to DNA by hydrophobic interaction. All the three different kinds of surfactants can form multilayer films with DNA on the electrode surface. The chemical structure of DNA keeps unchanged during interacting with these surfactants. The binding modes of DNA with these three different kinds of surfactants were also deduced.     

A method to tune the ionic current rectification of track-etched nanopores by using surfactant

A method is reported here to tune the ionic current rectification behavior through a conical nanopore fabricated with the track-etching technique. In order to change the surface charge property of the pore wall, we added the cationic surfactant hexadecyl trimethylammonium bromide (CTAB) into the working electrolyte of 0.1 M KCl. By controlling the modified region and the concentration of CTAB, the ionic current rectification degree of the nanopore could be tuned over the wide range of 0.2-65 at the voltage of ±0.9 V. The mechanism of the changes in current rectification behavior was analyzed by numerically solving the Poison-Nernst-Planck (PNP) equations.