求解任意形状厚板自由振动的微分容积法

用一种新型的数值方法－微分容积法求解具有任意形状的厚板自由振动问题。该方法的基本思想是将任意一个线性微分算子对函数的作用值如一个连续函数或其任意阶偏导数、或其线性组合在某点处的值表示为域内各点函数值的线性加权组合，如此可将问题的控制方程和边界条件离散成为一组线性齐次代数方程。这是一典型的特征值问题，其特征值可用子空间迭代法求解。文中给出了详细的计算公式，用一些数值算例说明了该方法求解中厚板自由振动问题的可行性、有效性和通用性，并通过与有关文献比较验证了该方法的数值精度。     

不连续Reissner矩形板的自由振动

用分区加权残值法研究Ressner矩形板在几何形状,边界条件等有突变时的自由振动问题,将研究对象按照结构几何形状和边界条件的具体情况划分为若干子域,在每个子域内用不同的试函数代入该域的内的控制方程到内部残值,并代入板的边界条件和各子域的协调条件得到边界残值和连续性残值,然后用最小二乘法消除残值,得到特征方程,文中讨论了该方法的收敛性和计算精度,求解了开孔矩形板的固有频率,并与已有结果进行了比较,结果表明：？该方法收敛性好,精度较高,适用范围广。     

基于自然单元法的功能梯度中厚板自由振动分析

自然单元法是一种基于自然邻近插值的无网格数值方法．相对于移动最小二乘近似而言,自然邻近插值不涉及到复杂的矩阵求逆运算,也不需要任何人为的参数．基于一阶剪切变形板理论,利用自然单元法对功能梯度中厚板的自由振动进行了数值分析．功能梯度板材料属性沿厚度方向呈梯度连续变化．由于自然邻近插值函数具有Kronecker delta函数性质,可以直接施加本质边界条件．通过本文给出的方法,对不同梯度指数和不同边界条件的功能梯度中厚板的振动频率进行了计算．通过与文献结果的对比验证了自然单元法求解的有效性．     

无单元法求解正交各向异性板自由振动问题

无单元法是一种新出现的数值方法。本文对无单元法的数学基础—滑动最小二乘法进行了详细的研究,推导了无单元法的形函数,并对一些关键问题,如权函数的选取,正交基函数,边界条件,数值实现方法等得出了研究结论。用无单元法研究了正交各向异性板的自由振动问题,由动力学变分原理和滑动最小二乘法导出了正交各向异性板的无单元法质量矩阵和刚度矩阵,编制了相应的计算程序,通过计算实例验证了该方法的有效性。     

无单元法求解欧拉梁及梁系的自由振动问题

双变量无单元法以广义移动最小二乘法为理论基础,同时考虑挠度和转角双变量.采用双变量无单元法建立了欧拉粱的质量矩阵和刚度矩阵,并进行自由振动的计算.不同边界条件欧拉梁动力特性的算例表明:双变量无单元法比与只考虑挠度的单变量无单元法具有更高的插值精度,并能在高阶振型计算中获得明显优于有限元的计算精度.通过试算法对影响半径中的scale乘子进行了讨论,认为在动力计算中Scale取3.5较合理.最后在欧拉粱的基础上,将无单元法应用于梁系模型的自由振动计算,显示了该法在复杂模型中的精确性.     

四边自由的矩形厚板的自由振动

由于要满足自由边的条件,使得本文所研究的板的分析相当困难。本文采用叠加法完满的解决了这个不易克服的困难,并使得边界条件能满足到任意精度,所取的位移解的每一项都严格满足控制微分方程。     

变截面欧拉梁自由振动分析的重采样微分求积法

采用重采样微分求积法求解了变截面欧拉梁的自由振动问题。推导了变截面梁的控制方程离散格式,采用重采样矩阵方法对边界条件进行处理,给出了变截面梁自由振动算法。采用本文方法对不同类型截面形式和不同边界条件的变截面梁进行自由振动分析,并和其他解法进行比较。计算结果表明,本文方法可以适用于不同变截面类型和不同边界条件,计算精度与解析解吻合良好,具有良好的收敛性能。在同等精度条件下网格点数少于现有计算方法。重采样转换矩阵边界处理方法相比于传统边界处理方法具有更快的收敛性能。     

弹性地基上变厚度矩形板自由振动的GDQ法求解

基于广义微分求积法(GDQ法),对弹性地基上变厚度矩形板横向自由振动的控制微分方程及其不同边界条件进行离散,研究了其自由振动的频率特性。数值计算得到了不同长宽比?、不同厚度变化参数?、不同地基参数K条件下以及简支或固定边界条件下弹性地基上变厚度矩形板的量纲为一的振动频率,并与已有文献进行了比较。结果表明:运用广义微分求积法对弹性地基上变厚度矩形板的频率求解结果在退化到K=0时与幂级数解的结果非常吻合;在条件相同的情况下,采用广义微分求积法仅需较少的节点(N=M=13)就能达到满意的求解精度。本文的研究为求解此类问题的低阶、高阶振动频率提供了一种简便有效的数值方法。     

Helmholtz方程的微分容积解法

用一种新型的数值技术－－微分容积法（Differential Cubature Method）求解二维Helmholtz方程的边值问题，几个数值算例表明，该方法稳定收敛，并具有较好的数值精度，本文方法适用于求解具有较小波数的Helmholtz方程。     

无单元法分析薄板自由振动问题

提出了分析四边简支和四边固定薄板自由振动问题的无单元法，推导了无单元法的插值函数，从变分原理出发导出薄板自由振动的质量矩阵和刚度矩阵，编制了相应的计算程序，通过计算实例与其它方法的结果进行比较．数值结果表明无单元法具有一系列优点。     

中厚板统计分析的随机边界元法

本文建立了分析含随机材料参数并具厚度不均匀性的中厚板问题的随机边界元法,基于Taylor级数展开技术,分析和到广义位移的均值和一阶偏差的积分方程,其中将材料参数的随机性和厚度的不均匀性作为等效荷载处理,从而得到广义边界位移或面力的均值和协方差,并进一步求出部点广义位移和内力的均值和协方差,最后用本文方法计算了两个数例,并对所得结果进行了分析,探讨。     

Boundary element method for orthotropic thick plates

The fundamental solutions of the orthotropic thick plates taking into account the transverse shear deformation are derived by means of Hörmander's operator method and a plane-wave decomposition of the Dirac δ-function in this papey. The boundary integral equations of the thick plates have been formulated which are adapted to arbitrary boundary conditions and plane forms. The numerical calculation of the fundamental solutions is discussed in detail. Some numerical examples are analyzed with BEM.     

Mixed finite element and differential quadrature method for free and forced vibration and buckling analysis of rectangular plates

This paper presents a combined application of the finite element method (FEM) and the differential quadrature method (DQM) to vibration and buckling problems of rectangular plates. The proposed scheme combines the geometry flexibility of the FEM and the high accuracy and efficiency of the DQM. The accuracy of the present method is demonstrated by comparing the obtained results with those available in the literature. It is shown that highly accurate results can be obtained by using a small number of finite elements and DQM sample points. The proposed method is suitable for the problems considered due to its simplicity and potential for further development.     

Postbuckling behavior of rectangular moderately thick plates and sandwich plates

ＰＯＳＴＢＵＣＫＬＩＮＧＢＥＨＡＶｉＯＲＯＦＲＥＣＴＡＮＧＵＬＡＲＭＯＤＥＲＡＴＥＬＹＴＨＩＣＫＰＬＡＴＥＳＡＮＤＳＡＮＤＷＩＣＨＰＬＡＴＥＳＣｈｅｎｇＺｈｅｎ－ｑｉａｎｇ（成振强）ＷａｎｇＸｉｕ－ｘｉ（王秀喜）ＨｕａｎｇＭａｏ－ｇｕａｎｇ（黄茂光）...     

基于边光滑有限元法的加筋板静力和自由振动分析

运用边光滑有限元法,研究分析了加筋板结构的静力和自由振动问题。在边光滑有限元法中,将基于边的应变光滑技术用于对原来的应变场进行光滑操作;由于应变光滑技术能够适当地软化原来过刚的有限元模型,从而能够得到更加接近于系统准确刚度的光滑有限元模型;鉴于三角形单元良好的适用性,选用三角形单元对模型进行网格划分;同时,为了解决低阶Reissner-Mindlin板单元弯曲过程中的横向剪切自锁问题,采用了一种新型的离散剪切间隙技术。算例的数值计算结果表明,与传统的有限元法相比,边光滑有限元法能够得到精度更高的计算结果,且收敛更快,计算效率更佳。     

Nonlinear free vibration analysis of piezoelastic laminated plates with interface damage

This paper presents a nonlinear model for piezoelastic laminated plates with damage effect of the intra-layers and inter-laminar interfaces. Discontinuity of displacement and electric potential on the interfaces are depicted by three shape functions. By using the Hamilton variation principle, the three-dimensional nonlinear dynamic equations of piezoelastic laminated plates with damage effect are derived. Then, by using the Galerkin method, a mathematical solution is presented. In the numerical studies, effects of various factors on the natural frequencies and nonlinear amplitude-frequency response of the simply-supported peizoelastic laminated plates with interfacial imperfections are discussed. These factors include different damage models, thickness of the piezoelectric layer, side-to-thickness ratio, and length-to-width ratio.     

The vibration and stability analysis of moderate thick plates by the method of lines

The method of lines based on Hu Hai-chang's theory for the vibration and stability of moderate thick plates is developed. The standard nonlinear ordinary differential equation (ODE) system for natural frequencies and critical load is given by use of ODE techniques, and then any indicated eigenvalue could be obtained directly from ODE solver by employing the so-called initial eigenfunction technique instead of the mode orthogonality condition.Numerical examples show that the present method is very effective and reliable.     

Rational finite element method for elastic bending of reissner plates

IntroductionAsawell-establishedandsophisticatednumericalanalysistechniqueforthedifferentialequahons,thefiniteelementmethodwasoriginatedindependentlybythedomesticandtheforeignmechanicalinvestigatorstheyyearsago.ItfoundforthefirsttimewideapplicationsintheelasticstfUctolproblemsandwiththedevelopmentofcomputerextendedinvaryingdegreestOalmostalltheengineeringdisciplinesandmanyscientificandtechnologicalfields.Thisleadstoadramaticbreakthroughforthecurrentcomputationalmathematics.Themathematicalbasis…     

各向异性弹塑性中厚度板壳的有限元分析

本文在文献［２，３］的基础上，提出了一个解各向异性弹塑性中厚度板壳问题的有限元方法。考虑材料各向异性的特点，采用了Ｈｉｌｌ推广的Ｈｕｂｅｒ－Ｍｉｓｅｓ屈服准则；借用Ｏｗｅｎ的剪切修正系数，正确计及了叠层复合材料壳体的横向剪切效应；为了避免“自锁”现象，文中采用了９节点的Ｈｅｔｅｒｏｓｉｓ二次壳单元；特别是本文利用插值外推的思想，提出了一个带预测的弧长增量控制法，显著提高了确定变形路径的计算效率。几个数值算例表明本文给出的有限元方法对于各向异性中厚度板壳的弹塑性分析有较好的精度，尤其是对具有复杂变形路径的结构计算，收敛速度提高更快。     

Thermal postbuckling analysis of moderately thick plates

A thermal postbuckling analysis is presented for a moderately thick rectangular plate subjected to (1) uniform and non-uniform tent-like temperature loading; and (2) combined axial compression and uniform temperature loading. The initial geometrical imperfection of plate is taken into account. The formulations are based on the Reissner-Mindlin plate theory considering the effects of rotary inertia and transverse shear deformation. The analysis uses a deflection-type perturbation technique to determine the thermal buckling loads and postbuckling equilibrium paths. Numerical examples are presented that relate to the performances of perfect and imperfect, moderately thick rectangular plates and are compared with the results predicted by the thin plate theory.