压电体椭圆孔边的力学分析

基于复变函数的方法,以PZT-4材料为例,分别采用精确电边界条件和非导通电边界条件进行了远场均匀载荷作用下的横观各向同性压电体椭圆孔的力学分析并与相关结果进行对比。结果表明当椭圆孔退化为圆孔时,无论在远场作用力载荷或电载荷,两种电边界条件下的结果均能完全吻合。随着椭圆孔的愈加尖锐化,非导通电边界条件逐渐不能适用。     

Plane problems in piezoelectric media with elliptic inclusion

I.IntroductionPiezoelectricmedia,asa"ex\'typeoffullctionalmaterial.arex'idel}'appliedtomanytechnologicalfieldsduetoitselectronlechallicalcouplillgeffect.Defects.likethatofothermaterials.arenotlimitedtocracks.x'oidsandinclusionsillpiezoelectricmaterialsorelements.Yet,stressconcentrationsornoll-ullitbrllldistl-ibutionsofelectricfieldillducedbythosedefectsareoneofthehe}l'filctorswllicllwouldleadpiezoelectricstructurestonon-normalfailure.Therel'ore.itisofgrealimportancetostudythepropertiesofthos…     

含椭圆形刚性夹杂的压电材料平面问题

应用复变函数的Ｆａｂｅｒ级数展开方法，本文研究了含椭圆形刚性夹杂的压电材料平面问题，给出了问题的封闭解。解签表明，夹杂内的电场强度和电位移为常量。并通过算例分析，讨论了正，逆压电效应在基体孔周处的机电行为。     

General coupled solution of anisotropic piezoelectric materials with an elliptic inclusion

In this investigation, the Stroh formalism is used to develop a general solution for an infinite, anisotropic piezoelectric medium with an elliptic inclusion. The coupled elastic and electric fields both inside the inclusion and on the interface of the inclusion and matrix are given. The project supported by the National Natural Science Foundation of China     

A penny-shaped crack in a transversely isotropic piezoelectric solid: Modes II and III problems

An exact analysis of the modes II and III problems of a pennyshaped crack in a transversely isotropic piezoelectric medium is performed in this paper. The potential theory method is employed based on the general solution of three-dimensional piezoelasticity and the four harmonics involved are represented by one complex potential. Previous results in potential theory are then utilized to obtain the exact solution that is expressed in terms of elementary functions. Comparison is made between the current results with those published and good agreement is obtained. The project supported by the National Natural Science Foundation of China (No. 19872060)     

Stress state of a transversely isotropic spherical shell with a rigid circular inclusion

Analytical expressions are derived for the stresses near a rigid circular inclusion in a transversely isotropic shallow spherical shell under uniform pressure. The form of solution depends on the range of the transverse shear compliance parameter. The influence of the relative radius of a rigid inclusion and transverse shear compliance on stress concentration is analyzed __________ Translated from Prikladnaya Mekhanika, Vol. 41, No. 12, pp. 67–73, December 2005.     

PLANE ELASTIC PROBLEM ON RIGID LINES ALONG CIRCULAR INCLUSION

The plane elastic problem of circular-arc rigid line inclusions is considered. The model is subjected to remote general loads and concentrated force which is applied at an arbitrary point inside either the matrix or the circular inclusion. Based on complex variable method, the general solutions of the problem were derived. The closed form expressions of the sectionally holomorphic complex potentials and the stress fields were derived for the case of the interface with a single rigid line. The exact expressions of the singular stress fields at the rigid line tips were calculated which show that they possess a pronounced oscillatory character similar to that for the corresponding crack problem under plane loads. The influence of the rigid line geometry, loading conditions and material mismatch on the stress singularity coefficients is evaluated and discussed for the case of remote uniform load.     

Analyzing the viscoelastic state of a plate with elliptic or linear elastic inclusions

A method is proposed for studying the stress state of a viscoelastic multiply connected isotropic plate with aligned elastic inclusions. The viscoelastic state of a plate with a finite or infinite number of circular and linear inclusions is analyzed __________ Translated from Prikladnaya Mekhanika, Vol. 43, No. 2, pp. 88–98, February 2007. For the centenary of the birth of G. N. Savin.     

On the electroelastic interaction of a piezoelectric screw dislocation with an elliptical inclusion in piezoelectric materials

ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｉｎｔｅｒａｃｔｉｏｎｏｆｄｉｓｌｏｃａｔｉｏｎｓｗｉｔｈｉｎｃｌｕｓｉｏｎｓｉｓｏｆｃｏｎｓｉｄｅｒａｂｌｅｉｍｐｏｒｔａｎｃｅｆｏｒｕｎｄｅｒｓｔａｎｄｉｎｇｔｈｅｐｈｙｓｉｃａｌｂｅｈａｖｉｏｒｏｆｍａｔｅｒｉａｌｓ.Ｓｕｃｈｓｔｕｄｉｅｓｃａｎｐｒｏｖｉｄｅｄｉｎｆｏｒｍａｔｉｏｎｃｏｎｃｅｒｎｉｎｇｃｅｒｔａｉｎｓｔｒｅｎｇｔｈｅｎｉｎｇｏｒｈａｒｄｅｎｉｎｇｍｅｃｈａｎｉｓｍｓｉｎｎｕｍｂｅｒｏｆｔｒａｄｉｔｉｏｎａｌａｎｄｃｏｍｐｏｓｉｔｅｍａｔｅｒｉ…     

压电材料椭圆切口的力学分析

在线性压电本构方程框架下，用复势函数方法对椭圆切口模型进行了精确的数值计算。完整地考虑了各向异性力电耦合效应以及切口内不同电介质的介电性质。给出了切口内部不同介电性质对压电材料内部应力的影响。指出了Sosa文章里的一些计算错误。由于现在文献中很少有关于电导通边界条件下理论解的数值结果，所以本文同时提供了不同电边界条件下理论解的数值结果，所以本文同时提供了不同电边界条件下的理论解的数值结果。最后通过最小势能原理建立了8结点有限元模型，对椭圆切口问题进行了计算并与理论解进行了仔细比较。     

Transversely isotropic damage around conducting crack-tip in four-point bending piezoelectric beam

Introduction Brittlenessmightresultinmicro_crackordamageinthepiezoelectricmediasubjectedto variousexternalmechanicalandelectricalloads.Thesedefectswilldevelopgraduallyand eventuallyemergeintomacrocracksandevenleadtothefailureofpiezoelectricdevices. Therefore,itisimportantthatthefracturemechanismofpiezoelectricceramicsisinvestigatedin detailfirstsothatthereliabilitypredictionandlifetimeestimationofpiezoelectricdevicescanbe made.Ithasbeenconfirmedthatthereexistsanunexplaineddiscrepancybetweensom…     

Analysis of a piezoelectric screw dislocation inside an elliptical inhomogeneity with confocal rigid line in piezoelectric material

This paper deals with the electro-elastic coupling interaction between a piezoelectric screw dislocation which is located inside the elliptical inhomogeneity and an electrically conductive confocal rigid line under remote anti-plane shear stresses and in-plane electrical loads in piezoelectric composite material. The analytical-functions of the complex potentials, stress fields and the image force acting on the piezoelectric screw dislocation are obtained based on the principle of conformal mapping, the method of series expansion, the technical of analytic continuation and the analysis of singularity of complex potentials. The rigid line and the piezoelectric material property combinations upon the image force and the equilibrium position of the dislocation are discussed in detail by the numerical computation.     

Plane strain problem for an incompressible nonlinearly elastic solid

The plane strain of an incompressible body is studied with geometrical and physical nonlinearity and potential forces taken into account. A nonlinear system of equations for strains is obtained in actual variables, and conditions of its ellipticity are derived in terms of the elastic potential. Boundary conditions for strains are found from specified loads. Analytical solutions of the boundary problem in strains and their corresponding stress fields are found for the case of identical elongations. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 50, No. 2, pp. 217–225, March–April, 2009     

压电螺位错与含界面裂纹圆形涂层夹杂的干涉

研究位于基体或夹杂中任意点的压电螺型位错与含界面裂纹圆形涂层夹杂的电弹耦合干 涉问题. 运用复变函数方法,获得了基体,涂层和夹杂中复势函数的一般解答. 典型例 子给出了界面含有一条裂纹时,复势函数的精确级数形式解. 基于已获得的复势函数和广 义Peach-Koehler公式,计算了作用在位错上的像力. 讨论了裂纹几何条件,涂层厚度和材 料特性对位错平衡位置的影响规律. 结果表明,界面裂纹对涂层夹杂附近的位错运动有很大 的影响效应,含界面裂纹涂层夹杂对位错的捕获能力强于完整粘结情况;并发现界面裂纹长 度和涂层材料常数达到某一个临界值时可以改变像力的方向. 解答的特殊情形包含了以 往文献的几个结果.     

Indentation of punches into a piezoceramic body: two-dimensional contact problem of electroelasticity

The paper establishes the relationship between the solutions of the static contact problems of elasticity (no friction) for an isotropic half-plane and problems of electroelasticity for a transversely isotropic piezoelectric half-plane with the boundary perpendicular to the polarization axis. This allows finding the contact characteristics in the electroelastic case from the known elastic solution, without the need to solve the electroelastic problem. The contact problems of electroelasticity for different types of wedge-shaped punches (flat punch with rounded one or two edges, half-parabolic punch, and a periodic system of punches) are solved as examples Translated from Prikladnaya Mekhanika, Vol. 44, No. 11, pp. 55–70, November 2008.     

Circular crack in a transversely isotropic piezoelectric space under point forces and point charges

In this paper, two kinds of circular crack including external circular crack and penny-shaped crack in a transversely isotropic piezoelectric space are considered. Firstly, we obtain the solution to the problem of an external circular crack in a transversely isotropic piezoelectric space subjected to antisymmetric normal point forces and point charges. Based on this, the solution of one-sided loading of an external circular crack is constructed. Secondly, the real shape of an external circular crack and the opening displacement of a penny-shaped crack under an arbitrary point force and point charge are further obtained. At last, the results are presented in a graphical form. The project supported by the National Natural Science Foundation of China (19872060 and 69982009) and the Postdoctoral Foundation of China     

Analysis of a crack in a half-plane piezoelectric solid with traction-induction free boundary

In this paper, the problem of a crack embedded in a half-plane piezoelectric solid with traction-induction free boundary is analyzed. A system of singular integral equations is formulated for the materials with general anisotropic piezoelectric properties and for the crack with arbitrary orientation. The kernel functions developed are in complex form for general anisotropic piezoelectric materials and are then specialized to the case of transversely isotropic piezoelectric materials which are in real form. The obtained coupled mechanical and electric real kernel functions may be reduced to those kernel functions for purely elastic problems when the electric effects disappear. The system of singular integral equations is solved numerically and the coupling effects of the mechanical and electric phenomena are presented by the generalized stress intensity factors for transversely isotropic piezoelectric materials.     

压电界面裂纹裂尖强度因子的显式计算公式

对常见横观各向同性压电材料(TIP)中界面裂纹的裂纹面与压电材料的极化方向成任意夹角的一般情况进行了研究,通过推导得到了计算裂尖强度因子的显式外推公式,同时给出了裂纹面与极化方向垂直的典型情况下的外推公式.这些显式计算公式为常见数值方法如有限元法及边界元法在压电材料断裂力学中的应用提供了便利.     

Stress state of a piezoceramic body with a plane crack opened by a rigid inclusion

The paper establishes a relationship between the solutions for cracks located in the isotropy plane of a transversely isotropic piezoceramic medium and opened (without friction) by rigid inclusions and the solutions for cracks in a purely elastic medium. This makes it possible to calculate the stress intensity factor (SIF) for cracks in an electroelastic medium from the SIF for an elastic isotropic material, without the need to solve the electroelastic problem. The use of the approach is exemplified by a penny-shaped crack opened by either a disk-shaped rigid inclusion of constant thickness or a rigid oblate spheroidal inclusion in an electroelastic medium __________ Translated from Prikladnaya Mekhanika, Vol. 44, No. 7, pp. 47–60, July 2008.     

The effective properties of piezocomposites, part I: Single inclusion problem

The problem of a piezoelectric ellipsoidal inclusion in an infinite nonpiezoelectric matrix is very important in engineering. In this paper, it is solved via Green's function technique. The closed-form solutions of the electroelastic Eshelby's tensors for this kind of problem are obtained. The electroelastic Eshelby's tensors can be expressed by the Eshelby's tensors of the perfectly elastic inclusion problem and the perfectly dielectric inclusion problem. Since the closed-form solutions of the Eshelby's tensors of the perfectly elastic inclusion problem and the perfectly dielectric inclusion problem can be given by theory of elasticity and electrodynamics, respectively, the electroelastic Eshelby's tensors can be obtained conveniently. Using these results, the closed-form solutions of the constraint elastic fields and the constraint electric fields inside the piezoelectric ellipsoidal inclusion are also obtained. These expressions can be readily utilized in solutions of numerous problems in the micromechanics of piezoelectric solids, such as the deformation and energy analysis, damage evolution and fracture of the piezoelectric materials. The project supported by the National Natural Science Foundation of China