厦门近海沉积物中PBDEs与PBBs残留的GC-NCI/MS和GC-ECD分析

将气相色谱-负离子化学源.质谱法(GV-NcI/Ms)和气相色谱-电子捕获检测法(GC-ECD)应用于分析沉积物中6种多溴联苯醚(PBDE8)和5种多溴联苯(PBBs)残留.沉积物样品以V(正己烷):V(丙酮)=1:1作为提取剂,采用索式提取法,提取液经酸性硅胶和中性硅胶层析柱净化和正己烷洗脱后.以PCB-103为内标物和GC-NCI-MS的选择离子监测方式(SIM)进行定性与定量分析,PBDE-209则采用GC-ECD法分析.平均加标回收率为93.3%～110.8%,相对标准偏差为1.2%～8.6%,方法检测限均小于0.20 μg/kg(PBDE-209的方法检测限是7.74 μg/kg),相关系数都大于0.9990.所分析沉积物样品中均含有微量的PBDE-99、PBB-49和PBDE-209.     

气相色谱-负离子化学电离质谱法分析深海鱼油 食品中的五种多溴联苯醚残留

建立了气相色谱-负离子化学电离质谱法(GC-NCI/MS)同时分析深海鱼油食品中5种多溴联苯醚残留的分析方法。深海鱼油食品用正己烷超声提取、中性与酸性硅胶色谱柱净化和正己烷洗脱后,以PCB103为内标物,采用GC-NCI/MS的选择离子监测方式(SIM)分析;同时探讨了5种多溴联苯醚的NCI/MS特征离子的断裂机理。当空白深海鱼油食品的加标浓度为20.0和100.0 μg/kg时,加标回收率为88.6%～111.3%,相对标准偏差为3.8%～13.5%,方法的检测限为0.77～1.34 μg/kg,线性范围为1.0～500.0 μg/kg,相关系数均大于0.9992。此方法已成功地应用于深海鱼油食品中5种痕量多溴联苯醚残留的同时分析。     

气相色谱-负离子化学源-质谱法分析禽蛋食品中10种多溴联苯和多溴联苯醚残留

建立了气相色谱-负离子化学源-质谱法(GC-NCI-MS)同时分析禽蛋食品中10种多溴联苯(PBBs)和多溴联苯醚(PBDEs)残留的分析方法。禽蛋食品用正己烷超声提取、浓硫酸酸化、中性和酸性硅胶层析柱净化和正己烷洗脱后,以PCB209为内标物,采用GC-NCI-MS的选择离子监测方式(SIM)分析;同时探讨了目标物PBDE100 NCI-MS特征离子的断裂机理。当禽蛋食品空白的加标质量浓度为5(3.5)和50(35)μg/kg时,加标回收率为75.2%～107%,相对标准偏差为2.3%～8.8%,方法检测限为0.14～0.39μg/kg,线性范围为1～250μg/kg,相关系数皆大于0.9991,方法已用于禽蛋食品中10种痕量PPBs和PBDEs残留的同时分析。     

气相色谱-负离子化学源/质谱法(GC-NCI/MS)分析鱼类和贝类样品中多溴联苯醚和多溴联苯

将气相色谱-负离子化学源/质谱法(GC-NCI/MS)应用于分析鱼类和贝类样品中5种多溴联苯醚(PBDEs)和5种多溴联苯(PBBs)残留.鱼类和贝类样品以正己烷/丙酮(1∶1,V/V)作为提取剂,采用超声萃取法,提取液经酸性硅胶和中性硅胶层析柱净化和正己烷洗脱后,以PCB-103为内标物和GC-NCI-MS的选择离子...     

超声萃取-气相色谱-质谱联用测定海洋沉积物中39种多溴联苯醚残留

建立了超声萃取-气相色谱-质谱法测定海洋沉积物中39种多溴联苯醚残留的分析方法.样品用V(正己烷):V(二氯甲烷) =1:1混合溶液提取,超声(控制水浴温度为25 ℃)提取60 min,采用硅胶和氧化铝净化,负化学离子源-气相色谱-质谱法进行检测,39种组分图谱在49 min 内能得到很好的分离. 39种混合样品的检出限为0.003～0.10 μg/kg; 加标回收率为66.2%～118.6%;相对标准偏差为0.8%～18.2%.用于实际样品分析,结果令人满意.     

超声辅助萃取气相色谱-质谱法测定松针中的多溴联苯醚

建立了测定松针样品中多溴联苯醚(PBDEs)的分析方法。松针样品经过正己烷-丙酮(体积比为1∶1)混合溶液超声萃取、浓硫酸和氧化铝柱净化后,采用气相色谱-负化学电离源质谱(GC-NCI-MS)选择离子监测(SIM)模式检测,内标法定量。结果表明,方法的加标回收率为83.8%~107.5%,三溴~七溴代联苯醚的仪器检出限为0.152~ 0.770 pg,十溴代联苯醚(BDE-209)的检出限为11.1 pg;三溴~七溴代联苯醚的方法检出限(湿重)为3~15 pg/g,BDE-209的方法检出限(湿重)为222 pg/g。方法具有良好的重现性、较高的灵敏度和良好的回收率。实际样品分析表明,松针中BDE-209是主要的同类物,约占8种PBDEs总量的82.3%,低溴代联苯醚以2,2′,4,4′-四溴联苯醚(BDE-47)为主。     

微波辅助萃取-气相色谱测定纺织品中多溴联苯(醚)类阻燃剂

建立了微波辅助萃取-气相色谱-微电子捕获检测纺织品中8种多溴联苯及多溴联苯醚类阻燃剂的方法.通过萃取剂选择实验和正交实验,确定了以25 mL正己烷: 二氯甲烷混合溶剂(2:3, V/V)为萃取剂,萃取温度60℃, 仪器功率400 W,萃取10 min的微波萃取条件,并用流速梯度和柱温程序结合的方法优化了气相色谱分析条件.方法的检出限为0.12～0.99 μg/kg;标准加入回收率为75.5%～112.9%;精密度1.3%～11.8%(n=6),适用于纺织品中痕量多溴联苯(醚)类阻燃剂的监测分析.     

海产品中九种多溴联苯醚残留的气相色谱-负化学离子源／质谱法分析

建立了海产品中九种多溴联苯醚(PBDEs)残留的气相色谱-负化学离子源/质谱(GC-NCI/MS)分析方法.采用正己烷提取剂超声提取、Florisil硅藻土净化柱净化和正己烷洗脱剂洗脱的样品前处理方法,以PCB-103作为内标物,以GC-NCI/MS的选择离子监测方式(S1M)对海产品中九种PBDEs残留进行了定性与定量分析.分析方法的线性相关系数均≥0.9988,九种PBDEs两种添加浓度水平时的平均加标回收率为88.1%～97.3%,相对标准偏差为2.0%～6.6%,方法检出限均小于0.106 ng/g.线性范围除PBDE-183为0.60～300.0 ng/g外,其余八种PBDEs为0.50～250.0 ng/g.同时分析了紫菜、海带、鲜海带、鱼干和花蛤干等海产品,在这些海产品干货中都检出了较多种的PBDEs残留.     

改进QuEChERS-浓H_2SO_4净化-气相色谱/质谱联用检测贝类中多溴联苯醚

本研究建立了贝类中8种指示性多溴联苯醚BDE-28、BDE-47、BDE-99、BDE-100、BDE-153、BDE-154、BDE-183和BDE-209的气相色谱/质谱联用检测方法。样品经正己烷-丙酮(1∶1,V/V)提取,采用改进的QuEChERS技术EMR-Lipid净化粉及浓H_2SO_4氧化净化。色谱选用短柱长、薄液膜的DB-5MS毛细管柱(15m×0.25mm×0.10μm),质谱以选择离子模式(SIM)监测,内标法定量,实现了贝类样品中低溴代及高溴代联苯醚的同时快速定性和定量分析。结果表明,8种目标多溴联苯醚类的检出限(LOD,S/N3)除BDE-209为1.0μg/kg,其余为0.1μg/kg,定量限(LOQ,S/N10)除BDE-209为3.0μg/kg,其余为0.3μg/kg;三个不同浓度的加标回收率在90.0%~120%之间,相对标准偏差皆小于10%。该方法的准确度和灵敏度较高,重现性好,且操作简便、高效,适合于贝类样品中多溴联苯醚类残留的同时检测。     

食品中多溴联苯醚残留的气相色谱-串联质谱分析方法研究

建立了食品中8种多溴联苯醚(PBDEs) 残留的气相色谱-串联质谱分析方法,初步解析了PBDEs的电子轰击串联质谱(EI MS/MS)图,为各种目标物的准确定性分析提供依据.以BDE-28、BDE-47、BDE-66、BDE-85、BDE-99、BDE-100、BDE-153、BDE-154为研究对象,对EI MS/MS各分析参数进行了优化.用超声提取-酸性硅胶层析柱净化的前处理方法制备样品,当空白样品的加标水平为10.0、25.0 μg/kg时,8种PBDEs的平均加标回收率为82% ～112%,相对标准偏差为3.1% ～15%,方法检出限均低于1.5 μg/kg;8种PBDEs的线性范围为10.0 ～500 μg/kg,相关系数均大于0.994 7.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.