Zinc anilido-oxazolinate complexes as initiators for ring opening polymerization

Three new anilido-oxazolines, ortho-C(6)H(4)(NHAr')(4,4-dimethyl-2-oxazoline) [Ar'=2,4,6-trimethylphenyl, HNPh(TriMe)Oxa (1); 2,6-diisopropylphenyl, HNPh(DiiPr)Oxa (2); 2-methoxyphenyl, HNPh(OMe)Oxa (3)], have been prepared. Reactions of 1 or 2 with one molar equivalent of ZnEt(2) in tetrahydrofuran or hexane solution give the zinc ethyl complexes (NPh(TriMe)Oxa)ZnEt (4) and (NPh(DiiPr)Oxa)ZnEt (5). The dinuclear zinc benzyloxide complexes, [(NAr'Oxa)Zn(mu-OBn)](2), [Ar'=2,4,6-trimethylphenyl, (6); 2-methoxyphenyl, (7)], were synthesized by the reaction of 4 with one molar equivalent of benzyl alcohol in tetrahydrofuran solution (for 6) or by treatment of with 3 one molar equivalent of ZnEt(2) in tetrahydrofuran solution followed by the addition of one molar equivalent of benzyl alcohol (for 7). The molecular structures are reported for compounds 6 and 7. Their catalytic activities toward the ring opening polymerization reactions are under investigation.     

Palladacycles bearing tridentate CNS-type benzamidinate ligands as catalysts for cross-coupling reactions

Three pendant benzamidines, [Ph-C(=NC(6)H(5))-{NH(E)}] [E = -(CH(2))(2)SMe (1); -(CH(2))(2)S(t)Bu (2); -o-C(6)H(4)SMe (3)], are described. Reactions of 1, 2 or 3 with one molar equivalent of Pd(OAc)(2) in CH(2)Cl(2) give the palladacyclic complexes, [Ph-C{-NH(η(1)-C(6)H(4))}{=N(E)}]Pd(OAc) [E = -(CH(2))(2)SMe (4); -(CH(2))(2)S(t)Bu (5); -o-C(6)H(4)SMe (6)], as mononuclear palladium complexes respectively. A minor product described as 5', {[Ph-C{-N(C(6)H(5))}{-N(CH(2))(2)S(t)Bu}]Pd(OAc)}(2), was isolated as benzamidinate-bridged dinuclear palladium complex upon recrystallizing from Et(2)O/hexane solution. Treatment of 1, 2 or 3 with one molar equivalent of PdCl(2) in the presence of NEt(3) in CH(2)Cl(2) gives the palladacyclic complexes, [Ph-C{-NH(η(1)-C(6)H(4))}{=N(E)}]PdCl [E = -(CH(2))(2)SMe (7); -(CH(2))(2)S(t)Bu (8); -o-C(6)H(4)SMe (9)], as mononuclear palladium complexes respectively. The crystal and molecular structures are reported for compounds 5, 5' and 6-8. The application of these palladacyclic complexes to the Suzuki and Heck coupling reactions was examined.     

Structural and catalytic studies of lithium complexes bearing pendant aminophenolate ligands

Lithium complexes bearing mono-anionic aminophenolate ligands are described. Reactions of ligand precursors HON(Me)Ph(OMe), HON(Me)Ph(SMe), HON(Me)C(OMe) or HON(Me)C(NMe2) [HON(Me)Ph(OMe) = (2-OMeC6H4CH2)N(Me)(CH2-2-HO-3,5-C6H2((t)Bu)2); HON(Me)Ph(SMe)= (2-SMe-C6H4CH2)N(Me)(CH2-2-HO-3,5-C6H2((t)Bu)2); HON(Me)C(OMe) = (MeOCH(2)CH2)N(Me)(CH2-2-HO-3,5-C6H2((t)Bu)2); HON(Me)C(NMe2) = (Me2NCH2CH2)N(Me)(CH2-2-HO-3,5-C6H2((t)Bu)2)] with 1.1-1.3 molar equivalents of (n)BuLi in diethyl ether solution afford (LiON(Me)Ph(OMe))(2) (3), (LiON(Me)Ph(SMe))2 (4), (LiON(Me)C(OMe))2 (5) and (LiON(Me)C(NMe2))2 (6) as dinuclear lithium complexes. The BnOH adduct of , (BnOH)(LiON(Me)C(OMe)) (7), was prepared from the reaction of and BnOH in diethyl ether solution. The molecular structures are reported for ligand precursor HON(Me)Ph(SMe) and compounds 3-5 and 7. These dinuclear lithium complexes show excellent catalytic activities toward the ring-opening polymerization of L-lactide in the presence of benzyl alcohol.     

Zinc and magnesium complexes incorporated by bis(amine) benzotriazole phenoxide ligand: synthesis, characterization, photoluminescent properties and catalysis for ring-opening polymerization of lactide

A new bis(amine) benzotriazole phenoxide ligand, (C8NN)BTP-H (1) was prepared from the Mannich condensation of 2-(2H-benzotriazol-2-yl)-4-(2,4,4-trimethylpentan-2-yl)phenol with the mixtures of excess paraformaldehyde and N,N,N-trimethylethylenediamine under reflux conditions. Zinc and magnesium complexes bearing the N,N,O-tridentate (C8NN)BTP ligand were synthesized and fully characterized. The reaction of (C8NN)BTP-H with ZnEt(2) (1.2 molar equiv.) in toluene gives the monomeric tetra-coordinated zinc complex [((C8NN)BTP)ZnEt] (2). The homoleptic and monomeric complexes [((C8NN)BTP)(2)M] (M = Zn (3) and M = Mg (4)) result from treatment of ZnEt(2) or Mg(n)Bu(2) with (C8NN)BTP-H (two equiv.), in which the metal center is hexa-coordinated by two tridentate (C8NN)BTP ligands. Luminescent properties and catalysis for lactide (LA) polymerizations of complexes 2-4 are studied. Complexes 2-4 produce bright green fluorescence with emission maxima ranging from 510 to 520 nm in the solid state. Experimental results indicate that complex 2 catalyzes the ring-opening polymerization of LA in the presence of 9-anthracenemethanol (9-AnOH) with efficient catalytic activities in a controlled fashion, yielding poly(rac-lactide) with a slight isotactic predominance (P(m) = 0.59).     

Synthesis, characterization and reactivity of heteroleptic rare earth metal bis(phenolate) complexes

The synthesis, characterization and reactivity of heteroleptic rare earth metal complexes supported by the carbon-bridged bis(phenolate) ligand 2,2'-methylene-bis(6-tert-butyl-4-methyl-phenoxo) (MBMP(2-)) are described. Reaction of (C(5)H(5))(3)Ln(THF) with MBMPH(2) in a 1 : 1.5 molar ratio in THF at 50 degrees C produced the heteroleptic rare earth metal bis(phenolate) complexes (C(5)H(5))Ln(MBMP)(THF)(n) (Ln = La, n = 3 (); Ln = Yb (), Y (), n = 2) in nearly quantitative yields. The residual C(5)H(5)(-) groups in complexes to can be substituted by the bridged bis(phenolate) ligands at elevated temperature to give the neutral rare earth metal bis(phenolate) complexes, and the ionic radii have a profound effect on the structures of the final products. Complex reacted with MBMPH(2) in a 1 : 0.5 molar ratio in toluene at 80 degrees C to produce a dinuclear complex (MBMP)La(THF)(mu-MBMP)(2)La(THF)(2) () in good isolated yield; whereas complexes and reacted with MBMPH(2) under the same conditions to give (MBMP)Ln(MBMPH)(THF)(2) (Ln = Yb (), Y ()) as the final products, in which one hydroxyl group of the phenol is coordinated to the rare earth metal in a neutral fashion. The reactivity of complexes and with some metal alkyls was explored. Reaction of complex with 1 equiv. of AlEt(3) in toluene at room temperature afforded unexpected ligand redistributed products, and a discrete ion pair ytterbium complex [(MBMP)Yb(THF)(2)(DME)][(MBMP)(2)Yb(THF)(2)] () was isolated in moderate yield. Furthermore, reaction of complex with 1 equiv. of ZnEt(2) in toluene gave a ligand redistributed complex [(mu-MBMP)Zn(THF)](2) () in reasonable isolated yield. Similar reaction of complex with ZnEt(2) also afforded complex ; whereas the reaction of complex with 1 equiv. of n-BuLi in THF afforded the heterodimetallic complex [(THF)Yb(MBMP)(2)Li(THF)(2)] (). All of these complexes were well characterized by elemental analyses, IR spectra, and single-crystal structure determination, in the cases of complexes , and -.     

Synthesis of zinc trisubstituted hydrazido complexes and ortho-metalation of 4-(dimethylamino)pyridine

The zinc hydrazide complexes [EtZn(N(SiMe(3))NMe(2))](2), [EtZn(N(Me)NMe(2))](4), and Zn(3)Et(4)(N(Et)NMe(2))(2) were synthesized by allowing excess hydrazine, HN(R)NMe(2), to react with diethyl zinc. The product of the reaction between ZnEt(2) and HN(i-Pr)NMe(2)ortho-metalated 4-(dimethylamino)pyridine (DMAP) at room temperature, producing the complex Zn[(NC(5)H(3)-p-NMe(2))ZnEt(N(i-Pr)NMe(2))](2). At elevated temperatures, Zn(3)Et(4)(N(Et)NMe(2))(2) also ortho-metalated DMAP, but [EtZn(N(Me)NMe(2))](4) did not. Single-crystal X-ray diffraction studies revealed that the hydrazide ligands in [EtZn(N(SiMe(3))NMe(2))](2) act as bridging mono-hapto amide ligands, and in Zn(3)Et(4)(N(Et)NMe(2))(2) and Zn[(NC(5)H(3)-p-NMe(2))ZnEt(N(i-Pr)NMe(2))](2) the hydrazide ligands are di-hapto.     

Coordination chemistry and reactivity of zinc complexes supported by a phosphido pincer ligand

The preparation and characterization of new Zn(II) complexes of the type [(PPP)ZnR] in which R = Et (1) or N(SiMe(3))(2) (2) and PPP is a tridentate monoanionic phosphido ligand (PPP-H = bis(2-diphenylphosphinophenyl)phosphine) are reported. Reaction of ZnEt(2) and Zn[N(SiMe(3))(2)](2) with one equivalent of proligand PPP-H produced the corresponding tetrahedral zinc ethyl (1) and zinc amido (2) complexes in high yield. Homoleptic (PPP)(2) Zn complex 3 was obtained by reaction of the precursors with two equivalents of the proligand. Structural characterization of 1-3 was achieved by multinuclear NMR spectroscopy ((1)H, (13)C, and (31)P) and X-ray crystallography (3). Variable-temperature (1)H and (31)P?NMR studies highlighted marked flexibility of the phosphido pincer ligand in coordination at the metal center. A DFT calculation on the compounds provided theoretical support for this behavior. The activities of 1 and 2 toward the ring-opening polymerization of ε-caprolactone and of L- and rac-lactide were investigated, also in combination with an alcohol as external chain-transfer agent. Polyesters with controlled molecular parameters (M(n), end groups) and low polydispersities were obtained. A DFT study on ring-opening polymerization promoted by these complexes highlighted the importance of the coordinative flexibility of the ancillary ligand to promote monomer coordination at the reactive zinc center. Preliminary investigations showed the ability of these complexes to promote copolymerization of L-lactide and ε-caprolactone to achieve random copolymers whose microstructure reproduces the composition of the monomer feed.     

Molecular zinc phosphonates: synthesis and X-ray crystal structures of [[(ZnMe)4(THF)2][tBuPO3]2] and [[(ZnEt)3(Zn(THF))3][tBuPO3]4[mu3-OEt]

The reactions of zinc alkyls with tert-butylphosphonic acid in 2 : 1 and 1 : 1 molar ratios afforded [[(ZnMe)(4-)(THF)2][tBuPO3]2] (2) and [[(ZnEt)3(Zn(THF))3][tBuPO3]4[mu3-OEt]] (3), respectively. Compounds 2 and 3 have been fully characterised by means of spectroscopic and analytical methods. Single-crystal X-ray diffraction studies revealed that zinc phosphonates 2 and 3 are tetra- and hexa-nuclear, respectively. This is in contrast to the dodecanuclear zinc phosphonate [[Zn2(THF)2(ZnEt)6Zn4(mu4-O)][(tBuPO3)8]] (1) obtained in a 1.5 : 1 reaction between zinc alkyls and tBuP(O)(OH)2.     

Synthesis and characterisation of trigonal C2-chiral di- and tetra-substituted bis(oxazoline) alkyl zinc complexes and their reactivity towards protic reagents

A series of zinc(ii) alkyl complexes stabilised by the C(2)-chiral bis(oxazoline) ligand ((R(1),R(2))BOX, with R(1) = (4S)-tBu, R(2) = H (a); R(1) = (4S)-Ph, R(2) = H (b); R(1) = (4R)-Ph, R(2) = (5S)-Ph (c)), has been synthesised and structurally characterised. ((R(1),R(2))BOX)H ligands react with ZnEt(2) in toluene to give the heteroleptic three-coordinate compounds of ((R(1),R(2))BOX)ZnEt, 1a, 1b and 1c in high yield. However, when the addition of (BOX)H ligands (a-b) over ZnEt(2) is "uncontrolled", the formation of homoleptic four-coordinate compounds are favoured (2a-b), but not for the more sterically crowded ligand (c). The zinc-ethyl derivatives (1a-c) react readily with protic reagents such as acetic acid (HOAc) and methanol (MeOH). For compounds 1a-c a redistribution of ligands is observed leading preferentially to homoleptic compounds, except for the bulkier ligand c providing a three-coordinate complex identified as ((Ph,Ph)BOX)Zn(OMe), 4c. The reaction of acetylacetone (acacH) with compounds 1a-c leads straightforwardly to the more stable four-coordinate compounds corresponding to ((R(1),R(2))BOX)Zn(η(2)-acac), 5a-c. The potential of these compounds as initiators for the copolymerisation of epoxides with CO(2) was investigated.     

The role of Zn-OR and Zn-OH nucleophiles and the influence of para-substituents in the reactions of binuclear phosphatase mimetics

Analogues of the ligand 2,2'-(2-hydroxy-5-methyl-1,3-phenylene)bis(methylene)bis((pyridin-2-ylmethyl)azanediyl)diethanol (CH(3)H(3)L1) are described. Complexation of these analogues, 2,6-bis(((2-methoxyethyl)(pyridin-2-ylmethyl)amino)methyl)-4-methylphenol (CH(3)HL2), 4-bromo-2,6-bis(((2-methoxyethyl)(pyridin-2-ylmethyl)amino)methyl)phenol (BrHL2), 2,6-bis(((2-methoxyethyl)(pyridin-2-ylmethyl)amino)methyl)-4-nitrophenol (NO(2)HL2) and 4-methyl-2,6-bis(((2-phenoxyethyl)(pyridin-2-ylmethyl)amino)methyl)phenol (CH(3)HL3) with zinc(II) acetate afforded [Zn(2)(CH(3)L2)(CH(3)COO)(2)](PF(6)), [Zn(2)(NO(2)L2)(CH(3)COO)(2)](PF(6)), [Zn(2)(BrL2)(CH(3)COO)(2)](PF(6)) and [Zn(2)(CH(3)L3)(CH(3)COO)(2)](PF(6)), in addition to [Zn(4)(CH(3)L2)(2)(NO(2)C(6)H(5)OPO(3))(2)(H(2)O)(2)](PF(6))(2) and [Zn(4)(BrL2)(2)(PO(3)F)(2)(H(2)O)(2)](PF(6))(2). The complexes were characterized using (1)H and (13)C NMR spectroscopy, mass spectrometry, microanalysis, and X-ray crystallography. The complexes contain either a coordinated methyl- (L2 ligands) or phenyl- (L3 ligand) ether, replacing the potentially nucleophilic coordinated alcohol in the previously reported complex [Zn(2)(CH(3)HL1)(CH(3)COO)(H(2)O)](PF(6)). Functional studies of the zinc complexes with the substrate bis(2,4-dinitrophenyl) phosphate (BDNPP) showed them to be competent catalysts with, for example, [Zn(2)(CH(3)L2)](+), k(cat) = 5.70 ± 0.04 × 10(-3) s(-1) (K(m) = 20.8 ± 5.0 mM) and [Zn(2)(CH(3)L3)](+), k(cat) = 3.60 ± 0.04 × 10(-3) s(-1) (K(m) = 18.9 ± 3.5 mM). Catalytically relevant pK(a)s of 6.7 and 7.7 were observed for the zinc(II) complexes of CH(3)L2(-) and CH(3)L3(-), respectively. Electron donating para-substituents enhance the rate of hydrolysis of BDNPP such that k(cat)p-CH(3) > p-Br > p-NO(2). Use of a solvent mixture containing H(2)O(18)/H(2)O(16) in the reaction with BDNPP showed that for [Zn(2)(CH(3)L2)(CH(3)COO)(2)](PF(6)) and [Zn(2)(NO(2)L2)(CH(3)COO)(2)](PF(6)), as well as [Zn(2)(CH(3)HL1)(CH(3)COO)(H(2)O)](PF(6)), the (18)O label was incorporated in the product of the hydrolysis suggesting that the nucleophile involved in the hydrolysis reaction was a Zn-OH moiety. The results are discussed with respect to the potential nucleophilic species (coordinated deprotonated alcohol versus coordinated hydroxide).     

Insertion reactions of SO2 into Pd-OR bonds: preparation of alkyl sulfito complexes of palladium(II)

Mononuclear palladium-hydroxo complexes of the type [Pd(N-N)(C6F5)(OH)][(N-N = 2,2'-bipyridine (bipy), 4,4'-dimethyl-2,2'-bipyridine (Me2bipy), or N,N,N',N'-tetramethylethylenediamine (tmeda) react with SO2(1 atm) at room temperature in alcohol (methanol, ethanol, propanol or isopropanol) to yield alkyl sulfito palladium complexes [Pd(N-N)(C6F5)(SO2OR)](R = Me, Et, Pr or iPr). Similar alkyl sulfito complexes [Pd(N-N)(C6F5)(SO2OR)](N-N = bis(3,5-dimethylpyrazol-1-yl)methane); R = Me or Et) are obtained when [Pd(N-N)(C6F5)Cl] is treated with KOH in the corresponding alcohol ROH and SO2 is bubbled through the solution. The reaction of [Pd(bipy)(C6F5)(OH)] with SO2 in tetrahydrofuran gives [Pd(N-N)(C6F5)(SO2OH)]. The X-ray diffraction study of [Pd(tmeda)(C6F5)(SO2OPr)] has established the sulfur coordination of the propyl sulfito ligand.     

Palladacyclic complexes bearing CNN-type ligands as catalysts in the Heck reaction

Preparations of novel unsymmetrical, tridentate nitrogen ligand precursors, PhN=C(CMe2)(NPh)C=N(CH2)2NMe2(1) and PhN=C(CMe2)(NPh)C=N(CH2)Py (2), are described. Treatment of 1 with 1 molar equiv. (COD)PdCl2 in the presence of NEt3 or with 1 molar equiv. Pd(OAc)2 affords orthometallated palladium(II) complexes, [PhN=C(CMe2)(N-eta1-Ph)C=N(CH2)2NMe2]PdX (X=Cl (3); X=OAc (4)), respectively. Compound can be yielded via the reaction of with an excess of LiCl in methanol. Treatment of with 1 molar equiv. of (COD)PdCl2, Pd(OAc)2 or Pd(TFA)2 affords orthometallated palladium(II) complexes, [PhN=C(CMe2)(N-eta1-Ph)C=NCH2Py]PdX (X=Cl (5); X=OAc (6); X=TFA (7)), respectively. The crystal and molecular structures are reported for compounds 2, 3, 5 and 6. The application of these novel palladacyclic complexes to the Heck reaction with aryl halide substrates was examined.     

Aluminum and zinc complexes based on an amino-bis(pyrazolyl) ligand: synthesis, structures, and use in MMA and lactide polymerization

The coordination chemistry of bis[2-(3,5-dimethyl-1-pyrazolyl)ethyl]amine (1, LH) with aluminum- and zinc-alkyls has been studied. Reaction of 1 with AlR3 affords the adducts [LH] x AlR3 (R = Me, 2; Et, 3), which undergo alkane elimination upon heating to yield the amido complexes [L]AlR2 (R = Me, 4; Et, 5). Reaction of LiO(iPrO)C=CMe2 with 2 proceeds via N-H deprotonation to give Li[L]AlMe3 (6), while the former enolate adds to 4 to generate [Me2C=C(OiPr)OLi] x [L]AlMe2 (7). Similarly, the 1:1 reaction of ZnEt2 with 1 gives [LH] x ZnEt2 (9), which is transformed into [L]ZnEt (10) upon heating. When an excess of ZnEt2 was used in the latter reaction, the bimetallic complex [L]ZnEt x ZnEt2 (11) was isolated beside 10. Performing the same reaction in the presence of O2 traces yielded selectively the dinuclear ethyl-ethoxide complex [L]Zn2Et2(mu-OEt) (12), which was alternatively prepared from the reaction of 10 and ZnEt(OEt). Zinc chloride complexes [LH] x ZnRCl (R = Et, 13; p-CH3C6H4CH2, 14) and [L]ZnCl (15) were prepared in high yields following similar strategies. Ethyl abstraction from 10 with B(C6F5)3 yields [L]Zn+EtB(C6F5)3- (16). All complexes have been characterized by multinuclear nuclear magnetic resonance (NMR), elemental analysis, and single-crystal X-ray diffraction studies for four-coordinate Al complexes 2, 4, and 6 and Zn complexes 9-12 and 14. Aluminate species 6 and 7 initiate the polymerization of methyl methacrylate, and the monomer conversions are improved in the presence of neutral complexes 2 or 4, respectively; however, these methyl methacrylate (MMA) polymerizations are uncontrolled. Polymerization of rac-lactide takes place at 20 degrees C in the presence of zinc ethoxide complex 12 to yield atactic polymers with controlled molecular masses and relatively narrow polydispersities.     

Investigations of preferential solvation on 1,4-dimethoxy-3-methyl anthracene-9,10-dione

Synthesis, spectroscopic and thermal studies of some complexes of a new N(2)-Schiff base ligand of N(1),N(2)-bis((E)-2-methyl-3-phenylallylidene)ethane-1,2-diamine (L) with a general formula of MLX(2) (M = Zn(II), Cd(II) and Hg(II); X = Cl(-), Br(-), I(-), SCN(-) and N(3)(-)) are described. The ligand and its complexes were characterized by elemental analysis, molar conductance, UV-vis spectra, FT-IR spectra, MS, (1)H NMR and (13)C NMR spectra. The conductivity measurement as well as spectral data indicated that the complexes are non-electrolyte. (1)H and (13)C NMR spectra have been studied in DMSO-d(6) and/or CDCl(3). The thermal behavior of the complexes shows weight loss by decomposition of the anions and ligand segments in the subsequent steps. Activation thermodynamic parameters of decomposition such as E*, ΔH*, ΔS* and ΔG* were calculated from TG curves.     

Amido phosphine complexes of zinc

The first examples of amido phosphine complexes of zinc have been prepared. Addition of N-(2-diphenylphosphinophenyl)-2,6-diisopropylaniline (H[NP]) to ZnMe(2) or ZnEt(2) in diethyl ether at -35 degrees C generated the monomeric, three-coordinate [NP]ZnR (R = Me, Et), while the metathesis reaction of ZnCl(2) with [NP]Li(THF)(2) in diethyl ether at -35 degrees C produced homoleptic [NP](2)Zn.     

Solid-state structures of zinc(II) benzoate complexes. Catalyst precursors for the coupling of carbon dioxide and epoxides

Zinc complexes derived from benzoic acids containing electron-withdrawing substituents have been synthesized from Zn(II)(bis-trimethylsilyl amide)(2) and the corresponding carboxylic acid (2,6-X(2)C(6)H(3)COOH, where X = F, Cl, or OMe) in THF and structurally characterized via X-ray crystallography. The 2,6-difluorobenzoate complex crystallizes from THF or CH(3)CN as a seven membered zinc aggregate, where the metal atoms are interconnected by a combination of 10 mu-benzoates and mu(4)-oxo ligands, that is, [(2,6-difluorobenzoate)(10)O(2)Zn(7)](solvent)(2), solvent = THF (1) and CH(3)CN (1a). On the other hand, the 2,6-dichlorobenzoate zinc derivative crystallizes from THF as a dimer, [(2,6-dichlorobenzoate)(4)Zn(2)](THF)(3) (2), where the two zinc centers are bridged by three benzoate ligand. One of the zinc centers possesses a tetrahedral ligand environment where the fourth ligand is a unidentate benzoate, and the other zinc center has an octahedral arrangement of ligands which is accomplished by the additional binding of three THF molecules. Upon dissolution of complex 1 or 2 in the strongly binding pyridine solvent, disruption of these zinc carboxylates occurs with concomitant formation of mononuclear zinc bis-benzoates with three pyridine ligands in the metal coordination sphere. Complexes 1 and 2 were found to be effective catalysts for the copolymerization of cyclohexene oxide and carbon dioxide to afford polycarbonates devoid of polyether linkages, that is, completely alternating copolymers. Although these catalysts or catalyst precursors in the presence of CO(2)/propylene oxide afforded mostly propylene carbonate, they did serve as efficient catalysts for the terpolymerization of carbon dioxide/cyclohexene oxide/propylene oxide. The reactivities of these zinc carboxylates were very similar to those previously reported analogous complexes which have not been structurally characterized. Hence, it is suggested here that all of these zinc carboxylates provide similar catalytic sites for CO(2)/epoxide coupling processes.     

Di-, tri-, and tetranuclear zinc hydroxamate complexes as structural models for the inhibition of zinc hydrolases by hydroxamic acids

Attempts to produce Zn analogues of the structural model complexes [M2(mu-O2CR)2(O2CR)2(mu-H2O)(tmen)2] (M = Ni, Co, Mn; R = CH(3), C(CH3)3, CF3) by the reaction of a series of zinc carboxylates with N,N,N',N'-tetramethylethylenediamine (tmen), resulted in the mononuclear complexes [Zn(OAc)(2)(tmen)] (1) and [Zn(crot)2(tmen)].(0.5)H2O (2) for R = CH3 and (CH)2CH3, respectively, and the dinuclear complexes [Zn(2)(mu-piv)(2)(piv)(2)(mu-H2O)(tmen)2] (3) and [Zn2(mu-OAc(F))2(OAc(F))2(mu-H2O)(tmen)2] (4) for R = C(CH3)3 and CF3, respectively. In contrast to the analogous imidazole series, i.e., [M2(mu-O2CR)2(O2CR)2(mu-H2O)(Im)4] (M = Ni, Co, Mn; R = CH3, C(CH3)3, CF3), zinc carboxylates react with imidazole to give only the mononuclear complexes [Zn(OAc)2(Im)2] (5), [Zn(crot)2(Im)2].H2O (6), [Zn(piv)2(Im)2].(0.5)H2O (7), and [Zn(OAc(F))2(Im)2] (8). Reaction of 1, 2, and 3 with either acetohydroxamic acid (AHA) or benzohydroxamic acid (BHA) gives the dinuclear complexes [Zn2(O2CR)3(R'A)(tmen)], where R'A = acetohydroxamate (AA) (9, 10, 11) or benzohydroxamate (BA) (13, 14, 15). In these complexes, the zinc atoms are bridged by a single hydroxamate and two carboxylates, with a capping tmen ligand on one zinc and a monodentate carboxylate bonded to the second zinc atom. This composition models closely the observed structure of the active site of the p-iodo-d-phenylalanine hydroxamic acid inhibited Aeromonas proteolyticaaminopeptidase enzyme. In contrast, 4 reacts with AHA to give [Zn2(OAc(F))3(tmen)2(AA)] (12) with an additional tmen ligand so that both Zn atoms are 6-coordinate, whereas reaction with BHA gives the trinuclear complex [Zn3(OAc(F))4(tmen)2(BA)2] (16). Reactions of 3 and 4 with glutarodihydroxamic acid (GluH2A2) produce the tetranuclear complexes [Zn4(piv)6(tmen)4(GluA2)] (18) and [Zn4(OAc(F))6(tmen)4(GluA2)] (19).     

Neutral zinc, lower-order zincate and higher-order zincate derivatives of pyrrole: synthesis and structural characterisation of zinc complexes with one, two, three or four pyrrolyl ligands

Towards a systematic development of the zinc chemistry of the important five-membered nitrogen heterocycle pyrrole, this work reports the synthesis and characterisation of five crystalline zinc-pyrrolyl complexes. Pyrrolyl in this context means where conversion of the N-H bond to an N-zinc bond has occurred. Two neutral complexes, [(t)BuZn(NC(4)H(4))(TMEDA)·HNC(4)H(4)] 1 and [Zn(NC(4)H(4))(2)(TMEDA)] 2, containing one and two pyrrolyl ligands, respectively, were synthesised by reacting di-t-butylzinc with different amounts of pyrrole in the presence of TMEDA (TMEDA is N,N,N',N'-tetramethylethylenediamine). X-ray crystallographic studies established that both adopt mononuclear structures with the salient feature of the former the presence of an additional parent protonated pyrrole molecule which engages its anionic counterpart in N-H…πC-C interactions. Employing a similar synthetic approach but adding n-butylsodium to the reaction mixture in attempts to form ate derivatives delivered three distinct sodium zincate (anionic zinc) compounds in [{(THF)(2)·NaZn(THF)(NC(4)H(4))(3)}(∞)] 3, [{(TMEDA)·Na}(2)Zn(NC(4)H(4))(4)] 4, and [{(PMDETA)·Na}(2)Zn(NC(4)H(4))(4)] 5 (PMDETA is N,N,N',N',N'-pentamethyldiethylenetriamine). From their crystal structures, the 1?:?1, Na:Zn complex 3 can be classified as a lower-order zincate having three pyrrolyl ligands bound to zinc in a polymeric chain arrangement, while the 2?:?1, Na:Zn complexes 4 and 5 are molecular higher-order zincates having Zn centres fully saturated by four pyrrolyl ligands. Discussion of the structures of 1-5 focuses on the interplay of σ-bonding and π-bonding between the pyrrolyl ligands and the metal centres. Revealingly, the zinc-free sodiopyrrole complex [{(PMDETA)·Na(NC(4)H(4))}(2)] 6, made and characterised for comparison, shows that on its own sodium prefers the former type of bonding, but is forced to switch to the latter type when combined with the stronger Lewis acid zinc in the zincate compositions. Complexes 1-6 have also been characterised in solution by NMR spectroscopy.     

Intermolecular alkene and alkyne hydroacylation with beta-S-substituted aldehydes: mechanistic insight into the role of a hemilabile P-O-P ligand

A straightforward to assemble catalytic system for the intermolecular hydroacylation reaction of beta-S-substituted aldehydes with activated and unactivated alkenes and alkynes is reported. These catalysts promote the hydroacylation reaction between beta-S-substituted aldehydes and challenging substrates, such as internal alkynes and 1-octene. The catalysts are based upon [Rh(cod)(DPEphos)][ClO(4)] (DPEphos=bis(2-diphenylphosphinophenyl)ether, cod=cyclooctadiene) and were designed to make use of the hemilabile capabilities of the DPEphos ligand to stabilise key acyl-hydrido intermediates against reductive decarbonylation, which results in catalyst death. Studies on the stoichiometric addition of aldehyde (either ortho-HCOCH(2)CH(2)SMe or ortho-HCOC(6)H(4)SMe) and methylacrylate to precursor acetone complexes [Rh(acetone)(2)(DPEphos)][X] [X=closo-CB(11)H(6)Cl(6) or [BAr(F) (4)] (Ar(F)=3,5-(CF(3))(2)C(6)H(3))] reveal the role of the hemilabile DPEphos ligand. The crystal structure of [Rh(acetone)(2)(DPEphos)][X] shows a cis-coordinated diphosphine ligand with the oxygen atom of the DPEphos distal from the rhodium. Addition of aldehyde forms the acyl hydride complexes [Rh(DPEphos)(COCH(2)CH(2)SMe)H][X] or [Rh(DPEphos)(COC(6)H(4)SMe)H][X], which have a trans-spanning DPEphos ligand and a coordinated ether group. Compared to analogous complexes prepared with dppe (dppe=1,2-bis(diphenylphosphino)ethane), these DPEphos complexes show significantly increased resistance towards reductive decarbonylation. The crystal structure of the reductive decarbonylation product [Rh(CO)(DPEphos)(EtSMe)][closo-CB(11)H(6)I(6)] is reported. Addition of alkene (methylacrylate) to the acyl-hydrido complexes forms the final complexes [Rh(DPEphos)(eta(1)-MeSC(2)H(4)-eta(1)-COC(2)H(4)CO(2)Me)][X] and [Rh(DPEphos)(eta(1)-MeSC(6)H(4)-eta(1)-COC(2)H(4)CO(2)Me)][X], which have been identified spectroscopically and by ESIMS/MS. Intermediate species in this transformation have been observed and tentatively characterised as the alkyl-acyl complexes [Rh(CH(2)CH(2)CO(2)Me)(COC(2)H(4)SMe)(DPEphos)][X] and [Rh(CH(2)CH(2)CO(2)Me)(COC(6)H(4)SMe)(DPEphos)][X]. In these complexes, the DPEphos ligand is now cis chelating. A model for the (unobserved) transient alkene complex that would result from addition of alkene to the acyl-hydrido complexes comes from formation of the MeCN adducts [Rh(DPEphos)(MeSC(2)H(4)CO)H(MeCN)][X] and [Rh(DPEphos)(MeSC(6)H(4)CO)H(MeCN)][X]. Changing the ligand from DPEphos to one with a CH(2) linkage, [Ph(2)P(C(6)H(4))](2)CH(2), gave only decomposition on addition of aldehyde to the acetone precursor, which demonstrated the importance of the hemiabile ether group in DPEphos. With [Ph(2)P(C(6)H(4))](2)S, the sulfur atom has the opposite effect and binds too strongly to the metal centre to allow access to productive acetone intermediates.     

New monodentate amidine superbasic ligands with a single configuration in fac-[Re(CO)3(5,5'- or 6,6'-Me2bipyridine)(amidine)]BF4 complexes

Treatment of two precursors, fac-[Re(CO)(3)(L)(CH(3)CN)]BF(4) [L = 5,5'-dimethyl-2,2'-bipyridine (5,5'-Me(2)bipy) (1) and 6,6'-dimethyl-2,2'-bipyridine (6,6'-Me(2)bipy) (2)], with five C(2)-symmetrical saturated heterocyclic amines yielded 10 new amidine complexes, fac-[Re(CO)(3)(L)(HNC(CH(3))N(CH(2)CH(2))(2)Y)]BF(4) [Y = CH(2), (CH(2))(2), (CH(2))(3), NH, or O]. All 10 complexes possess the novel feature of having only one isomer (amidine E configuration), as established by crystallographic and (1)H NMR spectroscopic methods. We are confident that NMR signals of the other possible isomer (amidine Z configuration) would have been detected, if it were present. Isomers are readily detected in closely related amidine complexes because the double-bond character of the amidine C-N3 bond (N3 is bound to Re) leads to slow E to Z isomer interchange. The new fac-[Re(CO)(3)(L)(HNC(CH(3))N(CH(2)CH(2))(2)Y)]BF(4) complexes have C-N3 bonds with essentially identical double-bond character. However, the reason that the Z isomer is so unstable as to be undetectable in the new complexes is undoubtedly because of unfavorable clashes between the equatorial ligands and the bulky N(CH(2)CH(2))(2)Y ring moiety of the axial amidine ligand. The amidine formation reactions in acetonitrile (25 °C) proceeded more easily with 2 than with 1, indicating that the distortion in 6,6'-Me(2)bipy resulting from the proximity of the methyl substituents to the inner coordination sphere enhanced the reactivity of the coordinated CH(3)CN. Reaction times for 1 and 2 exhibited a similar dependence on the basicity and ring size of the heterocyclic amine reactants. Moreover, when the product of the reaction of 1 with piperidine, fac-[Re(CO)(3)(5,5'-Me(2)bipy)(HNC(CH(3))N(CH(2)CH(2))(2)CH(2))]BF(4), was challenged in acetonitrile-d(3) or CDCl(3) with a 5-fold excess of the strong 4-dimethylaminopyridine ligand, there was no evidence for replacement of the amidine ligand after two months, thus establishing that the piperidinylamidine ligand is a robust ligand. This chemistry offers promise as a suitable means for preparing isomerically pure conjugated fac-[(99m)Tc(CO)(3)L](n±) imaging agents, including conjugates with known bioactive heterocyclic amines.