Modulation analysis in spatial phase shifting electronic speckle pattern interferometry and application for automated data selection on biological specimens

In electronic speckle pattern interferometry (ESPI), for a fast and objective analysis of measurement data which occur with a high repetition rate, an automated data processing is of particular advantage. For this reason, investigations were carried out to determine if the modulation of speckle interferograms can be applied as a quality parameter for the selection of suitable interferogram data for further evaluation e.g. phase unwrapping when spatial phase shifting (SPS) is performed. Six methods for determining the modulation of speckle interferograms are characterised and compared. The applicability of the speckle interferogram modulation as a parameter for mask generation in the unwrapping process of the phase difference is demonstrated by the evaluation of measurement data obtained from experiments with a spatial phase shifting endoscopic ESPI system on a technical surface and on a human gastrectomy specimen.     

Separation of vibration fringe data from rotating object fringes using pulsed ESPI

In industrial and other types of non-controlled environments, an unbalanced rotating object may present characteristic out-of-plane vibration amplitude at a specific frequency. For this type of cases and as a first step towards a complete evaluation, it is only desired to visualize the effect of the vibration on the rotating object, or vice versa, for instance to achieve object balancing. Real time optical non-intrusive measurement techniques such as pulsed electronic speckle pattern interferometry (ESPI), are well suited to study this rotating-vibrating object. The advantage offered by ESPI is that real-time fringe data is qualitatively analyzed while being observed on a TV monitor. The present paper proposes a qualitative method, based on pulsed ESPI, to separate rotation fringes from fringes solely related to vibration. The method relies on a high precision scheme that synchronizes and fixes an object point during rotation, without the use of an optomechanical object derotator.     

Evaluation of elastic modulus of cantilever beam by TA-ESPI

The paper proposes an evaluation technique for the elastic modulus of a cantilever beam by vibration analysis based on time average electronic speckle pattern interferometry (TA-ESPI) and Euler-Bernoulli equation. General approaches for the measurement of elastic modulus of a thin film are the Nano indentation test, Buldge test, Micro-tensile test, and so on. They each have strength and weakness in the preparation of the test specimen and the analysis of experimental results. ESPI is a type of laser speckle interferometry technique offering non-contact, high-resolution and whole-field measurement. The technique is a common measurement method for vibration mode visualization and surface displacement. Whole-field vibration mode shape (surface displacement distribution) at resonance frequency can be visualized by ESPI. And the maximum surface displacement distribution from ESPI can be used to find the resonance frequency for each vibration mode shape. And the elastic modules of a test material can be easily estimated from the measured resonance frequency and Euler-Bernoulli equation. The TA-ESPI vibration analysis technique can be used to find the elastic modulus of a material requiring simple preparation process and analysis.     

Applications of electronic speckle interferometry (ESI) techniques for spacecraft structural components

Laser-based electronic speckle interferometry (ESI) techniques, viz., electronic speckle pattern interferometry (ESPI) and electronic speckle shearographic interferometry (ESSI) are used for testing of spacecraft structural components. The combined ESPI and ESSI system developed in house was successfully used for the non-destructive evaluation (NDE) of honeycomb sandwich panels and propellant tanks of Indian Space Research Organization (ISRO). Debonds between face sheet and the honeycomb core were identified using (i) thermal and (ii) dual vacuum stressing methods. On-line NDE of the propellant tanks under internal pressure loading for identification of the minute cracks and thickness reduction areas were successfully implemented by ESI.     

平行式向列液晶实现相移剪切电子散斑干涉术的研究

研究了向列型液晶的相位调制特性，采用平行式向列液昌作为相移器建立了相移剪切电子散斑干涉计量系统。该方法将相移技术引入到剪切电子散斑干涉术中，提高了检测精度，采用了相关条纹法求解相位，简化了计算；相移方法简单，可靠。用该系统进行应变场的测量实验，取得了满意的效果。     

双光路电子散斑振动测量系统

本文给出了一种双光路电子散斑振动测量系统,该系统结合了普通ESPI离面振动测量光路和退敏感光路,既能对较大振幅范围的振动进行定性观测,又能实现全场自动定量分析,同时避免了相位去包裹处理.系统具有较高的抗干扰能力,可以应用于实际工程中复杂非连续结构的振动特性分析.     

The system of double-optical-path ESPI for the vibration measurement

In this paper, a system of double-optical-path electronic speckle pattern interferometry (ESPI) for measuring larger vibration is proposed. This system combines the conventional ESPI optical path for measuring out-of plane vibration and the de-sensitized optical path. It can be used to observe qualitatively and analyze quantitatively the vibration mode. At the same time, the phase unwrapping is avoided. The anti-disturbance capability of this system is high, so it can be used to analyze the vibration characteristics of complex and discontinuous structure in actual engineering.     

A dual-function ESPI system for the measurement of out-of-plane displacement and slope

A dual-function ESPI system is developed for the measurement of out-of-plane displacement and its slope change. The proposed system is convenient and also efficient to switch over from an out-of-plane sensitive configuration to shearography. A difference-of-phase method with a five-step algorithm is used for speckle fringe analysis.     

大剪切电子散斑干涉的载频调制与位移场测量

将电子散斑干涉场的载波调制引入到大剪切电子散斑干涉中,通过对参考物的微小偏转引入载波条纹;利用傅里叶变换法,解调出了变形场的相位,从而实现了物体变形场的精确测量。讨论了大剪切载频的调制机理,理论分析表明,调制条纹的空间频率与参考面偏转的角度成正比;因此,控制参考面的偏转角度可实现不同位移量系统的调制。利用中心加载周边固定圆盘进行了典型实验,实验结果证明在大剪切电子散斑干涉技术中可以通过参考面的旋转高质量地实现电子散斑干涉条纹的调制,求解位移场。该系统具有系统简单,不需要专门引入参考光,条纹质量好等优点。该技术可扩展电子散斑干涉的应用范围,有一定的实际应用价值。     

Variational denoising method for electronic speckle pattern interferometry

Traditional speckle fringe patterns by electronic speckle pattern interferometry (ESPI) are inherently noisy and of limited visibility, so denoising is the key problem in ESPI. We present the variational denoising method for ESPI. This method transforms the image denosing to minimizing an appropriate penalized energy function and solving a partial differential equation. We test the proposed method on computer-simulated and experimental speckle correlation fringes, respectively. The results show that this technique is capable of significantly improving the quality of fringe patterns. It works well as a pre-processing for the fringe patterns by ESPI.     

The design of a non-cube beam-splitter used for electronic speckle pattern interferometry

A non-cube beam-splitter (NCBS) is proposed, by which an incident beam can be separated largely in a direction and then the lights from the test object and the lights from a reference surface placed adjacently to the test object can be combined to construct a simple electronic speckle pattern interferometry (ESPI) system. Two mainly useful quantitative ways, to calculate the phase change of the test object, the phase-shift and the fringe carrier method with Fourier transform, can be achieved in the ESPI system with the NCBS. Experiments with phase-shifting and fringe carrier method are completed. The experimental results show that the monolithic design of the proposed NCBS is effective in ESPI measurement and immunity to vibrations.     

Improved evaluation of electronic speckle pattern interferograms by photogrammetric image analysis

Electronic speckle pattern interferometry (ESPI) is a well-established tool for non-destructive testing. It allows the quantitative determination of surface deformations and micro-movements with a sub-micrometer resolution. In the case of objects which are extended in depth, however, the evaluation and interpretation of the resulting correlation fringe patterns can be affected by perspective image distortions as well as by a varying image size. In this paper a method for combination of ESPI with a photogrammetric 3D coordinate measurement is presented. In this way, interferogram data are precisely allocated in 3D-space. Furthermore, it is possible to take into account a spatially varying sensitivity vector. The utilizability of the method is demonstrated by a deformation measurement on a stone sculpture.     

Analysis of an internal crack of pressure pipeline using ESPI and shearography

In this study, shearography and ESPI have been used for quantitative analysis of an internal crack of pipeline and both of them have proved to be suitable to qualitatively detect inside crack. However, shearography needs several critical? factors including the amount of shearing, shearing direction and induced load for the quantitative evaluation of the inside crack. In this study, the factors were optimized for the quantitative analysis and the size of cracks has been determined. Although the critical? factors in shearography have been optimized, it is difficult to determine the factors exactly because they are related to the details of cracks. On the other hand, ESPI is independent of the details of a crack and only the induced load plays an important role. The out-of-plane displacement was measured under the optimized load and the measured results were numerically differentiated, which resulted in an equivalent to the shearogram. The size of cracks can be determined quantitatively without any detail of a crack.     

A simple and inexpensive optical technique to help students visualize mode shapes

An imaging technique is introduced that is suitable for visualizing the mode shapes of vibrating structures in an educational setting. The method produces images similar to those obtained using electronic speckle pattern interferometry (ESPI), but it can be implemented for less than 1/10 the cost of a commercial ESPI system, and the apparatus is simple enough that it can be constructed by undergraduate students. This technique allows for real-time visualization of the normal modes and deflection shapes of harmonically vibrating structures, including those with shapes that make generating Chladni patterns with sand or powder impossible. The theory of operation and construction details are discussed.     

大动态范围形变测量

本文对激光散斑物体轮廓及形变测量和相移轮廓测量原理进行类比,首次提出大动态范围物体三维轮廓及形变测量方法。该方法具有测量原理简单、系统操作简便、测量精度高、测量动态范围大等特点,形变测量范围从亚微米级到毫米级。另外本文还推导了基于减模式激光散斑物体轮廓及形变测量的相位值计算公式。     

Measurement of the biaxial properties of nineteenth century canvas primings using electronic speckle pattern interferometry

This paper reports on the use of electronic speckle pattern interferometry (ESPI) for the measurement of the biaxial tensile properties of English 19th century canvas primings and their constituent materials. Typically, such primings are comprised of a complex structure of layers, each with different mechanical properties. ESPI has been shown to be an effective technique for investigating complex composite structures and it is especially useful for understanding the behaviour of heterogeneous materials in which non-uniform strains can occur. The flexibility of canvas primings presents a more difficult application for both biaxial tensile testing and ESPI strain measurements. A series of experiments have been carried out to measure the Poisson's ratio of the three main constituents of a 19th Century priming as composites and of an original 19th century primed canvas. The samples have been uniaxially tensioned on a biaxial tensile tester designed specifically to investigate the mechanical properties of paintings on canvas. Measurements of deformation have made using a two-dimensional in-plane ESPI configuration. The results have shown that Poisson's ratio decreases as the constituents of a painting are built up. Preliminary tests on thermally aged and original primings suggest that for a painting without cracks it is the embrittled paint which determines the mechanical response of the painting at an relative humidity of 35–40%.     

电子散斑干涉载频调制形貌测量方法的分析

根据电子散斑干涉载频调制测量物体形貌的基本原理,物体表面的微小偏转可引入包含物体高度信息的载波干涉条纹。将物体的偏转视为变形,对物体变形与载波干涉条纹之间的关系进行了讨论,得出了离面位移引入载波和面内位移引入含有物体高度信息相位的结论。发现利用典型电子散斑干涉系统测量物体形貌效果最好,并通过实验得到了验证。     

Measuring thickness change of transparent plate by electronic speckle pattern interferometry and digital image correlation

The thickness change of transparent plates was measured by electronic speckle pattern interferometry (ESPI) method and digital image correlation (DIC) method. An out-of-plane ESPI system was developed based on the Michelson interferometer, and a new thickness measurement method was designed, which is on the basis of Snell's law of refraction and DIC. The main principles and experimental procedures of these two methods were presented. The thickness change of polymethyl specimens under uniaxial tensile loading were measured by the optical techniques and compared with each other. The results reveal that the data obtained with DIC method achieve better linearity than ESPI.     

Non-destructive testing of overlap shear joints using electronic speckle pattern interferometry

The electronic speckle pattern interferometry (ESPI)¹ which was used is capable of detecting debonded areas with certain limitations. These depend on the size of the defect and the thickness of metal used.Prepared specimens with debonded areas in the middle of adhesive joints and on the periphery of an overlap shear joint were tested using various loading techniques. It was found that the mechanical loading and vacuum chamber method gave the best results when using the ESPI system for detecting debonded areas.The aim of the present work was to develop a reliable method for the testing of an environmental degradation of an adhesive joint which would progressively deteriorate the joint around the periphery and progress inwards, thus weakening the joint.     

Mechanical characterization of unplasticised polyvinylchloride thick pipes by optical methods

In this work a number of techniques (electronic speckle pattern interferometry, holographic interferometry, strain gauge and finite element method) are brought to bear in order to establish consistency in the results of strain measurement. This is necessary if optical non-destructive testing methods, such as those used here, are to gain acceptance for routine industrial use. The FE model provides a useful check. Furthermore, ESPI fringe data facilitates the extension of FE models, an approach that is of growing importance in component testing.

The use of in-plane and out-of-plane sensitive electronic speckle pattern interferometry (ESPI) for non-destructive material characterization of thick unplasticised polyvinylchloride (uPVC) pipes is presented. A test rig has been designed for stressing pipes by internal pressure. ESPI gives a complete mapping of the displacement field over the area imaged by the video camera. The results for the strain of uPVC obtained from ESPI data and from strain gauges are in good agreement. The value of Young's modulus has been obtained from the fringe data and compared with results obtained using holographic interferometry and from strain gauge measurements. The FE model also produces fringe data that is consistent with the ESPI results.