Attachment of tyrosinase on mixed self-assembled monolayers for the construction of electrochemical biosensor

<正>A mixed self-assembled monolayers(SAMs) of thioctic acid(T-COOH) and thioctic acid amide(T-NH_2) were used to immobilize tyrosinase for fabricating biosensor.The results showed that the mixed SAMs prepared from solution at the ratio of 1:4 provided an excellent microenvironment for enzymatic reaction between tyrosinase and substrate.The biosensor exhibited a fast response and high sensitivity for sensing substrate.     

Self-assembly of C(60) pi-extended tetrathiafulvalene (exTTF) dyads on gold surfaces

The first self-assembly of a C60 pi-extended tetrathiafulvalene (exTTF) dyad on a gold surface is reported. Four fullerene derivatives, two of them containing p-quinonoid pi-extended tetrathiafulvalenes (exTTFs), have been synthesized, and their solution electrochemistry has been investigated by means of cyclic voltammetry. Fullerene-containing SAMs of thioctic acid derivatives 3 and 6 have also been investigated by cyclic voltammetry. The cyclic voltammograms of both compounds exhibit three reversible reduction waves, and for compound 6, one irreversible oxidation process corresponding to the oxidation of the exTTF subunit is observed. Stable self-assembled monolayers (SAMs) of fullerene derivative 3 were formed on gold surfaces, whereas dyad 6 does not present a very clear electrochemical response, most probably as a result of structural rearrangements on the monolayer or charge transfer between the C60 and exTTF moieties.     

Stereocontrolled synthesis of tricyclic fused oxazolidinone as antibacterial agent

Tricyclic fused oxazolidinone 3a and 3b have been synthesized as antibacterial agents in 12 and 11 steps respectively. The key intermediates 10a and 10b have been developed via opening of epoxide 9a and 9b and cyclization by the resulting oxygen anion attack.     

Comparison of the signaling and stability of electrochemical DNA sensors fabricated from 6- or 11-carbon self-assembled monolayers

We have characterized the solution-phase and dry storage stability of electrochemical E-DNA sensors fabricated using mixed self-assembled monolayers (SAMs) composed of 6- or 11-carbon (C6 and C11, respectively) alpha,omega-thiol alcohols and the analogous C6- or C11-thiol-terminated stem-loop DNA probe. We find that the solution-phase and dry storage stability of C6-based E-DNA sensors are limited and poorly reproducible. The use of stabilizing agents bovine serum albumin plus either glucose or trehalose significantly improves the dry storage shelf life of such sensors: when using these preservatives, we observe only 7-9% sensor degradation after 1 month of storage in air at room temperature. In comparison, the stability of C11-based E-DNA sensors is significantly greater than that of the C6-based sensors; we observe only minor (5-8%) loss of signal upon storing these sensors for a week under ambient solution conditions or for more than a month in air in the presence of preservatives. Moreover, whereas the electron-transfer rate through C11 SAMs is slower than that observed for C6 SAMs, it is rapid enough to support good sensor performance. It thus appears that C11 SAMs provide a reasonable compromise between electron-transfer efficiency and sensor stability and are well suited for use in electronic DNA-sensing applications.     

Copper(II)-mediated oxidative coupling of 2-aminonaphthalene homologues. Competition between the straight dimerization and the formation of carbazoles

Whereas the Cu(II)-mediated oxidative coupling of 2-aminonaphthalenes 7a and 7b results in the clean formation of 1,1'-binaphthyls 13a and 13b, respectively, their higher homologues and congeners 8-12 have been found to exhibit a different reaction pattern. Thus, 2-aminoanthracene (8) gave a approximately 1:1 mixture of the expected bianthryl derivative 15 and the carbazole 16, whereas the 9-aminophenanthrene (10), 3-phenyl-1-aminonaphthalene (11), and 2-aminochrysene (12) produced almost exclusively the corresponding carbazoles 19, 20, and 21, respectively. By contrast, the isomeric 3-aminophenanthrene (9) gave rise to the azo compound 17 as a result of the preferential oxidation on the nitrogen. The carbazoles have been shown to arise directly from the coupling reactions rather than from the primarily formed binaphthyls. Alternatively, carbazole 19 can also be prepared from 1b on reaction with hydrazine. On the other hand, treatment of 3a with hydrazine resulted in the formation of a approximately 2:7 mixture of amine 11 and arylhydrazine 22. 2,2'-Diamino-1,1'-bianthryl (15) has been resolved into enantiomers via cocrystallization with (-)-N-benzylcinchonidinium chloride and shown to have (R)-(-)-15 configuration by X-ray crystallography.     

Voltammetry of immobilized cytochrome c on novel binary self-assembled monolayers of thioctic acid and thioctic amide modified gold electrodes

Horse heart cytochrome c (cyt c) was adsorbed on the binary self-assembled monolayers (SAMs) composed of thioctic acid (T-COOH) and thioctic amide (T-NH₂) at gold electrodes via electrostatic interaction. The cyt c adsorbed on the modified gold electrode exhibited well-defined reversible electrochemical behavior in 10 mM phosphate buffer solution (PBS, pH 7.0). The surface concentration (Γ) of electroactive species, cyt c, on the binary SAMs was higher than that in single-component SAMs of T-COOH, and reached a maximum value of 9.2 × 10⁻¹² mol cm⁻² when the ratio of T-COOH to T-NH₂ in adsorption solution was of 3:2, and the formal potential (E^0′=(E_pa+E_pc)/2) of cyt c was −0.032 V (vs. Ag|AgCl (3 M NaCl)) in a 10 mM PBS. The interaction between cyt c and the binary SAMs made the E^0′ shift negatively when compared with that of cyt c in solution (+0.258 V vs. NHE, i.e., +0.058 V vs. Ag|AgCl (3 M NaCl)). The fractional coverage of bound cyt c was a 0.64 theoretical monolayer. The standard electron transfer rate constant of cyt c immobilized on the binary SAMs was also higher than that on single-component SAMs of T-COOH, and the maximum value of 15.8 ± 0.6 s⁻¹ was obtained when the ratio of T-COOH to T-NH₂ in adsorption solution was at 3:2. The results suggest that the electrode modified with the binary SAMs functions better than the electrode modified with single-component SAMs of T-COOH.     

New crown annelated tetrathiafulvalenes: synthesis, electrochemistry, self-assembly of thiol derivatives, and metal cation recognition

The synthesis of new S(2)O(4)-crown annelated tetrathiafulvalene (TTF) derivatives substituted with one terminal thiol group is described. Self-assembled monolayers (SAMs) of these compounds have been assembled on gold and platinum surfaces, the latter substrate giving improved quality films. SAMs of TTF derivative 16b are the most stable of those we have studied. Electrochemical data for SAMs of 5a, 5b, 8, 16a, and 16b in acetonitrile reveal two reversible one-electron waves, typical of the TTF system; the current increased linearly with scan rate, indicating a surface wave response. SAMs of 8, 16a, and 16b exhibited an electrochemical response in aqueous electrolytes, which was observed between 50 and 100 cycles. Moreover, if the potential scanned was limited to the first TTF oxidation, the cyclic voltammetry response was observed for at least 1000 cycles. Metal complexation by the crown ionophore of the SAMs in acetonitrile has been monitored by a positive shift in the first oxidation potential of the TTF unit (maximum DeltaE(1)(1/2) = 80 mV for Ag(+)). We also report the X-ray crystal structure of TTF-crown derivative 21 bearing two hydroxymethyl substituents, synthesized during the course of this work. The structure is characterized by infinite chains of molecules linked by strong intrachain hydrogen bonds between the terminal hydroxy groups.     

New semifluorinated dithiols self-assembled monolayers on a copper platform

New alpha,omega-semifluorinated dithiols HS-(CH2)11-(CF2)n-(CH2)11-SH, called DTn, and corresponding dithioacetate molecules CH3COS-(CH2)11-(CF2)n-(CH2)11-SCOCH3, called DTAn ( n = 4, 6, 8), were synthesized and used to create self-assembled monolayers (SAMs) on both untreated copper surfaces and electrochemically reduced ones. The aim of this study is to assess the organization of the resulting SAMs, particularly the effect of the presence of two perhydrogenated segments surrounding the perfluorinated one, and the ability of these difunctional molecules to bind copper substrates by only one end per molecule. In each case, the organization of the SAM is rather poor and only DTA8 molecules seem to adopt an upright position on reduced copper. In addition, the layers have been investigated by cyclic voltammetry (CV) to assess their coverage. DT4 SAMs reveal a covering ratio higher than 99%.     

Gold nanoparticles-enhanced bisphenol A electrochemical biosensor based on tyrosinase immobilized onto self-assembled monolayers-modified gold electrode

A novel electrochemical sensor based on the immobilization of tyrosinase(tyr) onto gold nanoparticles(nano-Au) and thioctic acid amide(T-NH2) self-assembled monolayers(SAMs)-modified gold electrode has been developed for the determination of bisphenol A(BPA).It was found that the nano-Au could significantly enhance the electrochemical response of tyr/nano-Au/T-NH2/Au electrode to BPA,and the enhancement effect of nano-Au on the current response was also related to the enzyme.The results indicated that the biosensor could be used as a detector for BPA determination with a linear range from3.99 ×10-7mol/L to 2.34 ×10-4mol/L and a detection limit of 1.33×10-7mol/L.In addition,this biosensor showed good reproducibility.     

Study on surface acid-base property of carboxylic acid-terminated self-assembled monolayers by cyclic voltammetry and electrochemical impedance spectroscopy

Cyclic voltammetry and electrochemical impedance spec-troscopy were used to study the surface acid-base property of carboxylic acid-terminated self-assembled monolayers(SAMs).A carboxylic acid-terminated thiol,such as thioctic acid(1,2-dithiolane-3-pentanoic acid),was self-assembled on gold electrodes.Electron transfer between the bulk solution and the SAM modified electrode was studied at different pH using Fe(CN)63-as a probe.The surface pka of thioctic acid was determined by cyclic voltammetry and electrochemical impedance spectroscopy to be 5.6 ±0.1 and 5.8±0.1,respectively.The method is compared with other methods of monolayer pKa measurement.     

Carboracycles: Macrocyclic Compounds Composed of Carborane Icosahedra Linked by Organic Bridging Groups

A family of macrocyclic compounds are described, together with their precursors. These cycles are composed of icosahedral carboranes linked via their carbon vertices through 1,3-trimethylene, alpha,alpha'-1,3-xylylene, or alpha,alpha'-2,6-lutidylene groups. The compounds cyclo-(1,3-trimethylene-1',2'-closo-1',2'-C(2)B(10)H(10))(4) (6a), cyclo-(1,3-trimethylene-1',2'-closo-9',12'-dimethyl-1',2'-C(2)B(10)H(8))(4) (6b), cyclo-(1,3-trimethylene-1',2'-closo-1',2'-C(2)B(10)H(10))(3) (9), cyclo-(alpha,alpha'-1,3-xylylene-1',2'-closo-1',2'-C(2)B(10)H(10))(2) (11a), cyclo-(alpha,alpha'-1,3-xylylene-1',7'-closo-1',7'-C(2)B(10)H(10))(2) (11b), cyclo-(alpha,alpha'-1,3-xylylene-1',7'-closo-9',10'-dimethyl-1,7-C(2)B(10)H(8))(2) (11c), cyclo-(alpha,alpha'-1,3-xylylene-1',2'-closo-1',2'-C(2)B(10)H(10))(4) (12), cyclo-(alpha,alpha'-1,3-xylylene-1',7'-closo-1',7'-C(2)B(10)H(10))(3) (13), cyclo-(alpha,alpha'-2,6-lutidylene-1',7'-closo-1',7'-C(2)B(10)H(10))(2) (19), and cyclo-(alpha,alpha'-2,6-lutidylene N-oxide-1',7'-closo-1',7'-C(2)B(10)H(10))(2) (20) have been synthesized. The structures of 6a, 6b, 9, 11a, 11b, 11c, 12, and 19 have been determined by X-ray crystallography. Crystal data: for 6a, triclinic, space group P&onemacr;, a = 11.131(2) ?, b = 12.642(2) ?, c = 12.996(2) ?, alpha = 84.383(6) degrees, beta = 65.884(6) degrees, gamma = 97.292(5) degrees, Z = 1, R = 0.079; for 6b, monoclinic, space group P2(1)/a, a = 13.500(2) ?, b = 31.141(3) ?, c = 13.831(2) ?, beta = 99.90(1) degrees, Z = 2, R = 0.097; for 11a, monoclinic, space group C2/c, a = 14.5682(8) ?, b = 14.5046(8) ?, c = 16.1998(8) ?, beta = 95.631(2) degrees, Z = 4, R = 0.081; for 11b, monoclinic, space group P2(1)/n, a = 11.650(2) ?, b = 10.606(2) ?, c = 11.730(2) ?, beta = 104.951(6) degrees, Z = 2, R = 0.069; for 11c, orthorhombic, space group Pbca, a = 12.532(2) ?, b = 14.271(2) ?, c = 18.143(3) ?, Z = 4, R = 0.076; for 19, orthorhombic, space group Pcab (No. 61, standard setting Pbca), a = 11.0428(6) ?, b = 11.3785(6) ?, c = 22.533(1) ?, Z = 4, R = 0.074.     

The AFM measured force required to rupture the dithiolate linkage of thioctic acid to gold is less than the rupture force of a simple gold-alkyl thiolate bond

We show with atomic force microscopy that thioctic acid, a spatially constrained system with two sulfur linkages to gold, is less stable to tensile stress than a thiolate with a single attachment to gold. The force required to remove the dithiolate-linked thioctic acid was 0.31+/-0.13 nN, whereas the force required to remove a simple thiolate from the gold substrate was 1.05+/-0.29 nN. These results suggest that SAMs of densely packed or polypodal thiols may be substantially less stable under tensile stress than previously recognized and that the additional thiolate linkages may not only fail to increase the overall strength of attachment but could actually reduce it.     

Polyhedral monocarbaborane chemistry. Some C-phenylated seven, eight, nine, ten, eleven and twelve-vertex species

Some synthetic and structural systematics for monocarbaboranes, using the C-phenylated motif as the example, are investigated. The 10-vertex [6-Ph-nido-6-CB(9)H(11)](-) anion 1, from reaction of PhCHO with B(10)H(14) in KOH/H(2)O, is a useful entry synthon into C-phenyl monocarbaborane chemistry. Treatment of anion 1 with Na/thf yields the 10-vertex [1-Ph-closo-1-CB(9)H(9)](-) anion 2a, whereas treatment of anion 1 with iodine in alkaline solution yields the isomeric 10-vertex [2-Ph-closo-2-CB(9)H(9)](-) anion 2b, which isomerises quantitatively to 2a on heating under reflux in DME. Thermolysis of anion 1 yields the 9-vertex [4-Ph-closo-4-CB(8)H(8)](-) anion 5, whereas treatment of anion 1 with FeCl(3)/HCl gives neutral 9-vertex [4-Ph-arachno-4-CB(8)H(13)] 3. Compound 3 gives neutral 9-vertex [1-Ph-nido-1-CB(8)H(11)] 4 in refluxing toluene, and gives the 7-vertex [2-Ph-closo-2-CB(6)H(6)](-) anion 7 and the 8-vertex [1-Ph-closo-1-CB(7)H(7)](-) anion 6 in refluxing toluene with NEt(3). Reaction of 1 with [BH(3)(thf)] yields the 11-vertex [7-Ph-nido-7-CB(10)H(12)](-) anion 8 which can be converted to the 12-vertex [1-Ph-closo-1-CB(11)H(11)](-) anion 10 using [BH(3)(SMe(2))]; alternatively, anion 1 yields anion 10 directly on treatment with [BH(3)(NEt(3))]. Treatment of anion 8 with I(2)/KOH yields the 11-vertex [2-Ph-closo-2-CB(10)H(10)](-) anion 9. The structures of anions 1, 2a, 2b, 5, 6, 7, 8, 9 and 10 have been established by single-crystal X-ray diffraction analyses of their [NEt(4)](+) salts, and those of neutral 3 and 4 estimated by DFT calculations at the B3LYP/6-31G* level; similar calculations have also been applied to the new anionic closo species 2a, 2b, 5, 6, 7, 9 and 10. Crystals of the [NEt(4)](+) salt of the [2-Ph-closo-2-CB(6)H(6)](-) anion 7 required synchrotron X-radiation for sufficient diffraction intensity for molecular-structure elucidation. The syntheses are in principle generally applicable to give extensive derivative C-aryl and C-alkyl chemistries.     

Non-covalent immobilization of C60 on gold surfaces by SAMs of porphyrin derivatives

Three porphyrin derivatives, one containing thioctic ester groups (3) and the other two with thioether chains (4 and 5), were synthesized. The cyclic voltammograms of the porphyrin compounds exhibit two reversible reduction processes and one reversible oxidation. Stable self-assembled monolayers (SAMs) of the porphyrin compounds were formed on gold surfaces. Non-covalent immobilization of C₆₀ was accomplished upon incubation of some of the porphyrin SAMs in solutions of C₆₀.     

Self-Assembled Monolayers of Molecular Conductors with Terpyridine-Metal Redox Switching Elements: A Combined AFM,STM and Electrochemical Study

Self-assembled monolayers (SAMs) of terpyridine-based transition metal (ruthenium and osmium) complexes, anchored to gold substrate via tripodal anchoring groups, have been investigated as possible redox switching elements for molecular electronics. An electrochemical study was complemented by atomic force microscopy (AFM) and scanning tunneling microscopy (STM) methods. STM was used for determination of the SAM conductance values, and computation of the attenuation factor β from tunneling current–distance curves. We have shown that SAMs of Os-tripod molecules contain larger adlayer structures compared with SAMs of Ru-tripod molecules, which are characterized by a large number of almost evenly distributed small islands. Furthermore, upon cyclic voltammetric experimentation, Os-tripod films rearrange to form a smaller number of even larger islands, reminiscent of the Ostwald ripening process. Os-tripod SAMs displayed a higher surface concentration of molecules and lower conductance compared with Ru-tripod SAMs. The attenuation factor of Os-tripod films changed dramatically, upon electrochemical cycling, to a higher value. These observations are in accordance with previously reported electron transfer kinetics studies.     

Enantioselective transport by a steroidal guanidinium receptor

The cationic steroidal receptors 9 and 11 have been synthesized from cholic acid 3. Receptor 9 extracts N-acetyl-alpha-amino acids from aqueous media into chloroform with enantioselectivities (L:D) of 7-10:1. The lipophilic variant 11 has been employed for the enantioselective transport of N-acetylphenylalanine, a) through dichloromethane (DCM) and dichloroethane (DCE) bulk liquid membranes (U-tube apparatus), and b) through 2.5% (v/v) octanol/hexane via hollow fibre membrane contactors. Significant enantioselectivities and multiple turnovers were observed for both types of apparatus.     

First examples of oxaphosphirane pentacarbonylchromium(0) and -molybdenum(0) complexes: synthesis, structures and reactions

Synthesis of the first oxaphosphirane chromium(0) and molybdenum(0) complexes of the type [{(R(1)PCH(R(2))-O}M(CO)(5)] (R(1) = C(5)Me(5)) (8a-e, 15a-e) and (R(1) = CH(SiMe(3))(2)) (9a-e, 16a-e) via reaction of dichloro(organo)- (1, 2, 10, 11) and chloro(organo)phosphane complexes (3,4,12) with lithium bases and aldehydes 7a-e is reported. Furthermore, bicyclic 1,3-oxaphospholane complexes 17 and 18 have been obtained via O-protonation of oxaphosphirane complexes 8a and 15a with HCl. All complexes were characterized by NMR, IR spectroscopic, mass spectrometric investigations and, in addition, single-crystal X-ray structures of complexes 8a-e, 9a,c, 15a,b,e, 16a-c, 17, 18 are presented and discussed.     

Synthesis of furo[3,2-g]chromones under microwave irradiation and their antitumor activity evaluation

A series of furo[3,2-g]chromone derivatives were synthesized via the reaction of furochromone carbaldehyde 1 with amines 3a - d and thioglycolic acid to give thiazolidinones 4a - d . The later react with benzaldehyde/thiourea or hydroxylamine and DMF-DMA in glacial acetic acid to give thiazolopyrimidines 5a - d or thiazoloisoxazoles 6a - d , respectively. Also, the synthesis of α-aminophosphonates via the one-pot reaction of 1 and amines 3a , b were trapped by dialkylphosphites 7a - c afforded the corresponding α-aminophosphonates 8a - f . Applying hexaalkyltriamidophosphites 9a , b to 1 gives alkylidenephosphorane ylides 11a , b in an open structure form. In the present investigation, the in vitro inhibition capacity of compounds ( 4a , 4c , 5b , 5c , 6b - d , 8a - f , and 11a ) was screened in three human cancer cell lines HCT-116, MCF-7, and HepG2. The anticancer activity results revealed that 8b and 8e had more potent cytotoxic inhibition activity against HCT-116 cell line; however, all the tested compounds had obviously less cytotoxic activity against MCF-7 cell line, while 5b , 5c , and 6d were potent against HepG2 cell line compared with that of doxorubicin.     

Surface structure and chemical switching of thioctic acid adsorbed on Au(111) as observed using near-edge X-ray absorption fine structure

Thioctic acid (alpha-lipoic acid) is a molecule with a large disulfide-containing base, a short alkyl chain with four CH2 units, and a carboxyl termination. Self-assembled monolayer (SAM) films ofthioctic acid adsorbed on Au(111) have been investigated with near-edge X-ray absorption fine structure (NEXAFS) spectroscopy and X-ray photoelectron spectroscopy (XPS) to determine film quality, bonding, and morphology. Using standard preparation protocols for SAMs, that is, dissolving thioctic acid in ethanol and exposing gold to the solution, results in poor films. These films are highly disordered, contain a mixture of carboxyl and carboxylate terminations, have more than monolayer coverage, and exhibit unbound disulfide. Conversely, forming films by dissolving 1 mmol thioctic acid into 5% acetic acid in ethanol (as previously reported with carboxyl-terminated alkanethiols) forms ordered monolayers with small amounts of unbound sulfur. NEXAFS indicates tilted over endgroups with the carboxyl group normal on average 38 degrees from the surface normal. Slight angle-dependent intensity modulations in other features indicate alkyl chains statistically more upright than prostrate on the surface. Reflection-absorption Fourier transform infrared (RA-FTIR) spectra indicate hydrogen bonding between neighboring molecules. In such well-formed monolayers, a stark reorientation occurs upon deprotonation of the endgroup by rinsing in a KOH solution. The carboxylate plane normal is now about 66 degrees from sample normal, a much more upright orientation. Data indicate this reorientation may also cause a more upright orientation to the alkyl portion of the molecules.     

Some nitro derivatives of 1,4-benzodioxino[2,3-b]pyridine. Crystal and molecular structure of 2,7,8-trinitro-1,4-benzodioxino[2,3-b]pyridine

The electrophilic nitration of 1,4-benzodioxino[2,3-b]pyridine 1 with nitric acid in sulfuric acid has been studied. Some of the products of nitration including 7 - and 8 -nitro derivatives 2a and 2b , respectively, 7,9-, 7,8- and 6,8-dinitro derivatives 3a , 3b and 3c , respectively, and 2,7,8-trinitro derivative 4 have been isolated and characterized. The structure of isomers have been assigned for derivatives 3b and 4 while tentative structures have been proposed for the other products. The cyclopentadienyliron complex of 1 gives the same reaction products under similar conditions while for some other milder nitrating reagents no reaction was observed. 2,7,8-Trinitro-1,4-benzodioxino[2,3-b]pyridine 4 crystallizes in the monoclinic system, space group P2₁/c; the dihedral angle between the planes of outer rings was found to be 174.65(8) degrees. The planes of the nitro groups have been found to be rotated with respect to the appropriate pyri-dine and benzene ring planes by 11.13(11) degrees for the 2-nitro group and 47.56(9) and 29.80(9) degrees for the 7-nitro and 8-nitro groups, respectively.