Synthesis and evaluation of self-calibrating ratiometric viscosity sensors

We describe the design, synthesis and fluorescent profile of a family of self-calibrating dyes that provide ratiometric measurements of fluid viscosity. The design is based on covalently linking a primary fluorophore (reference) that displays a viscosity-independent fluorescence emission with a secondary fluorophore (sensor) that exhibits a viscosity-sensitive fluorescence emission. Characterization of fluorescent properties was made with separate excitation of the units and through Resonance Energy Transfer from the reference to the sensor dye. The chemical structures of both fluorophores and the linker length have been evaluated in order to optimize the overall brightness and sensitivity of the viscosity measurements. We also present an application of such ratiometric dyes for the detection of membrane viscosity changes in a liposome model.     

Immunolabeling for correlative light and electron microscopy on ultrathin cryosections.

Correlative labeling permits colocalization of molecular species for observation of the same sample in light (LM) and electron microscopy (EM). Myosin bands in ultrathin cryosections were labeled using both fluorophore conjugated to secondary antibody (IgG) and colloidal gold (cAu) particles conjugated to primary IgG as reporters for LM and transmission electron microscopy (TEM), respectively. This technique allows rapid evaluation of labeling via LM, prior to more time-consuming observations with TEM and also yields two complementary data sets in one labeling procedure. Quenching of the fluorescent signal was inversely related to the distance between fluorophore and cAu particles. The signal from fluorophore conjugated to secondary antibody was inversely proportional to the size of cAu conjugated to primary antibody. Where fluorophore and cAu were bound to the same antibody, the fluorescence signal was nearly completely quenched regardless of fluorophore excitation or emission wavelength and regardless of particle size, 3 nm and larger. Colloidal metal particles conjugated to primary antibody provide high spatial resolution for EM applications. Fluorophore conjugated to secondary antibody provides spatial resolution well within that of conventional fluorescence microscopy. Use of fluorescent secondary antibody moved the fluorophore a sufficient distance from the cAu particles on the primary antibody to limit quenching of fluorescence.     

Enhanced fluorescence of epicocconone in surfactant assemblies as a consequence of depth-dependent microviscosity

The extents of fluorescence enhancement of epicocconone are found to be different in the micelles of the surfactants sodium dodecyl sulfate (SDS) and Triton X100 (TX 100). A decrease in fluorescence, observed in the cationic cetyltrimethylammonium bromide (CTAB) micelles, is rationalized by the formation of anions of the fluorophore at the Stern layer. To understand the difference in the effects of SDS and TX 100, the nature of the excited-state process in the fluorophore has been investigated by fluorescence spectroscopy, supported by complementary quantum chemical calculations. The excited-state dynamics of epicocconone is found to depend on polarity and viscosity of the medium, with a more pronounced dependence on viscosity. An inspection of the molecular orbitals involved in the electronic absorption of the molecule reveals the possibility of photoisomerization, which conforms to the observed solvent dependence of the fluorescence spectral properties. An apparent mismatch between trends observed in steady-state spectra and those in temporal decays indicates a significant contribution of an ultrafast component, which cannot be detected in the time resolution of our instrument. The viscosity dependence of the fluorescence quantum yields provides an explanation for the difference in the extents of fluorescence enhancement in the two micelles, in the light of location of the fluorophore at different depths of the micelle. The enhancement of fluorescence, with an unchanged fluorescence maximum, opens up the possibility that the fluorophore could be a useful dual emitting marker for fluorescence microscopy of heterogeneous systems, as the fluorescence of protein-bound epicocconone has been previously reported to be significantly red-shifted.     

Photoinduced electron transfer (PET) based Zn2+ fluorescent probe: transformation of turn-on sensors into ratiometric ones with dual emission in acetonitrile

Ratiometric sensors for the detection of metal ions have gained increasing attention due to its self-calibration tendency for the environmental effects. In this context, we have synthesized and characterized a dual emitting ratiometric Zn(2+) probe (1) having acridinedione as a fluorophore and N,N-bis(2-pyridylmethyl)amine (BPA) as a receptor unit. Existence of two different conformation of the molecule with photoinduced electron transfer (PET) from amine moiety to the acridinedione fluorophore leads to dual emission, namely locally excited (425 nm) and anomalous charge transfer emission (560 nm) in aprotic solvents. In the presence of one equivalent of Zn(2+), a 15-fold fluorescence enhancement in the locally excited state together with the quenching of charge transfer emission is observed. The intensity changes at the two emission peaks allow a ratiometric detection of Zn(2+) under PET signaling mechanism. The utilization of PET process for the ratiometric fluorescence change will further signify the importance of PET mechanism in sensing action. Addition of Zn(2+) to 1 in acetonitrile/water mixtures shows a single emission peak with fluorescence enhancement.     

Synthesis and light‐emitting properties of carbazole‐based copolymers bearing cyano‐substituted arylenevinylene chromophore

Two arylenevinylene compounds bearing the cyano group at α‐position ( 6 ) and β‐position ( 9 ) from the dialkoxylphenylene unit were synthesized, in which the molecular termini were functionalized with 3‐bromocarbazole. The Suzuki coupling copolymerization of these compounds with 1,4‐bis[(3′‐bromocarbazole‐9′‐yl)methylene]‐2,5‐didecyloxybenzene and 9,9‐dihexylfluorene‐2,7‐bis(boronic acid) was carried out to obtain copolymers ( cp67 and cp97 ) containing the cyano‐substituted arylenevinylene fluorophore of 7 mol %. Model compounds ( 6 ′ and 9 ′) corresponding to the arylenevinylene fluorophore were also prepared. The UV spectra of copolymers resembled that of homopolymer hp with no arylenevinylene segment in both CHCl₃ solution and thin film. The emission maxima of copolymers in CHCl₃ (394 nm) agreed with that of homopolymer indicating that the emission bands originated from the carbazole‐fluorene‐carbazole segment. The emission maximum wavelength of copolymer cp67 in thin film (477 nm) indicated fluorescence from the cyano‐substituted arylenevinylene fluorophore because of the occurrence of fluorescence resonance electron transfer. In contrast, copolymer cp97 showed fluorescence at 528 nm to suggest the formation of a new emissive species such as a charge‐transfer complex (exciplex). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 91–98, 2010     

Fluorescence resonance energy transfer by quencher adsorption into hydrogels containing fluorophores

We synthesized anionic hydrogels containing fluorophores and investigated the adsorption of a cationic quencher having an amino group into hydrogels by fluorescence resonance energy transfer (FRET). FRET from the fluorophore to the quencher in hydrogels was examined by fluorescence intensity and fluorescence decay using a fluorescence spectrophotometer and femtosecond laser spectroscopy. The fluorescence intensity of the fluorophore‐containing hydrogels decreased rapidly with increasing amounts of adsorbed cationic quencher. The fluorescence emission of the fluorophore in the quencher‐adsorbed hydrogels containing fluorophores decayed more rapidly than that of the original hydrogels. The aforementioned result indicates that the fluorescence of the fluorophore‐containing hydrogels is quenched due to FRET from the fluorophore to the quencher as the cationic quenchers can approach the fluorophores in hydrogels by electrostatic interactions. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3245–3252, 2006     

Excited-state intramolecular proton transfer in 2-(2'-arylsulfonamidophenyl)benzimidazole derivatives: the effect of donor and acceptor substituents

A series of water-soluble 2-(2'-arylsulfonamidophenyl)benzimidazole derivatives containing electron-donating and accepting groups attached to various positions of the fluorophore pi-system has been synthesized and characterized in aqueous solution at 0.1 M ionic strength. The measured pK(a)'s for deprotonation of the sulfonamide group of monosubstituted derivatives range between 6.75 and 9.33 and follow closely Hammett's free energy relationship. In neutral aqueous buffer, all compounds undergo efficient excited-state intramolecular proton transfer (ESIPT) to yield a strongly Stokes-shifted fluorescence emission from the phototautomer. Upon deprotonation of the sulfonamide nitrogen at high pH, ESIPT is interrupted to yield a new, blue-shifted emission band. The peak absorption and emission energies were strongly influenced by the nature of the substituents and their attachment positions on the fluorophore pi-system. The fluorescence quantum yield of the ESIPT tautomers revealed a significant correlation with the observed Stokes shifts. The study provides valuable information regarding substituent effects on the photophysical properties of this class of ESIPT fluorophores in an aqueous environment and may offer guidelines for designing emission ratiometric pH or metal-cation sensors for biological applications.     

Installation/modulation of the emission response via click reaction

We have demonstrated the installation of a fluorescence property into a nonfluorescent precursor and modulation of an emission response of a pyrene fluorophore via click reaction. The synthesized fluorophores show different solvatochromicity and/or intramolecular charge transfer (ICT) feature as is revealed from the UV-visible, fluorescence photophysical properties of these fluorophores, and DFT/TDDFT calculation. We observed that some of the synthesized fluorophores showed purely ICT character while emission from some of them arose from the LE state. A structureless and solvent polarity-sensitive dual emission behavior was observed for one of the triazolylpyrene fluorophores that contains an electron-donating -NMe(2) substituent (fluorophore, 7a). Conversely, triazolylpyrene with an electron-withdrawing -CN group (fluorophore, 7b) showed a solvent polarity-independent vibronic emission. The effect of ICT on the photophysical properties of these fluorophores was studied by fluorescence emission spectra and DFT/TDDFT calculations. Fluorescence lifetimes were also measured in different solvents. All of our findings revealed the delicate interplay of structure and emission properties and thus having broader general utility. As the CT to LE intensity ratio can be employed as a sensing index, the dual emissive fluorophore can be utilized in designing the molecular recognition system too. We envisage that our investigation is of importance for the development of new fluorophores with predetermined photophysical properties that may find a wide range of applications in chemistry, biology, and material sciences.     

Cryptand derived fluorescence signaling systems for sensing Hg(II) ion: A comparative study

Two laterally non-symmetric aza-oxa cryptands have been derivatized with the electron-withdrawing fluorophore, 7-nitrobenz-2-oxa-1,3-diazole to obtain the corresponding mono-, bis- and tris-products. In each case, no appreciable emission is observed when the fluorophore is excited due to an efficient photoinduced intramolecular electron transfer (PET) from the lone pair on nitrogen present in the bridges. In the presence of a number of transition and heavy metal ions, their emission characteristics change. The electron-withdrawing ability of the fluorophore drastically alters the binding ability of the cryptand such that Hg(ii) affords largest enhancement of fluorescence. In contrast, mono-, bis- and tris-anthryl (electron-donating) derivatives of these cryptands do not exhibit any selectivity towards Hg(ii) and affords low fluorescence enhancement. Also, the difference in cavity dimension of the o-cryptand and m-cryptand plays a crucial role in terms of selectivity.     

The mechanism of pyrene fluorescence quenching by selective and nonselective quenchers during sol–gel transition

The process of pyrene fluorescence quenching by potassium iodide, acrylamide, and gaseous oxygen in silane sol during sol–gel transition was investigated. Pyrene fluorescence emission spectra were recorded vs concentrations of the added quencher on consecutive days of the gelling process. When using 0, 20, and 100% oxygen in the gas mixture as a quencher, time-resolved measurements were also made. On this basis, Stern–Volmer constants were determined on consecutive days of the gelling process, availability of fluorophore molecules to the quencher, and also rate constants of pyrene quenching by acrylamide, iodide ions, and oxygen were specified. Moreover, diffusion coefficients were determined for acrylamide and potassium iodide in the silane gel formed. The mechanism of fluorophore quenching in sol of growing viscosity and in gel was discussed in view of using this carrier in the construction of sensors and optical biosensors.     

Fluorescent dendritic polymers and nanostructured coatings for the detection of chemical warfare agents and other analytes

Polyamidoamine (PAMAM) dendrimers of generations zero (G0) to four (G4), and a hyperbranched polyurea (HB‐PU), were functionalized with 1,5‐dansyl (1,5‐D), 2,5‐dansyl (2,5‐D), 2,6‐dansyl (2,6‐D) and nitrobenzofurazan (NBD) fluorophores that change their fluorescence emission wavelength in response to chemical environment, and the resulting dendritic polymers were characterized by MALDI‐TOF mass spectrometry, ¹H NMR, ¹³C NMR, and fluorescence spectroscopy. Fluorophore‐functionalized dendritic polymers were then reacted further with 3‐acryloxypropyldimethoxymethylsilane (AOP‐DMOMS) at various fluorophore to DMOMS substitution ratios. The resulting materials were cast onto glass slides, and cured into robust nanostructured coatings. Coatings with 50% fluorophore–50% DMOMS substitution showed the strongest fluorescence and the best physical properties. Coated coupons were tested against a wide range of analytes including the chemical warfare agent simulants dimethyl methylphosphonate (DMMP) and chloroethylethylsulfide (CEES), and the water‐methanol‐ethanol series. It was found that the ability of the coatings to distinguish between analytes decreased with increasing cross‐link density for both dendrimer and hyperbranched polymer‐based coatings. It was also found that the percent fluorophore substitution and the type of dendritic polymer carrying the fluorophore had no significant effect upon fluorescence emission wavelength, but fluorescence emission wavelength became less dependent upon solvent with increasing dendrimer generation and molecular mass. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5101–5115, 2009     

Solid-state fluorescence organic materials as a tool for spectral modification of ZnS-based screen-printed thick layer electroluminescence devices

This work is focused on modification of spectral characteristic of light emitted by alternating current powder-based ZnS electroluminescent device by addition of a color conversion material. A suitable diketopyrrolopyrrole (DPP) derivative with absorption spectrum compatible with emission spectrum of phosphor was found and was added into the printing formulation. Electroluminescent panel was printed by screen printing method and the influence of fluorophore was evaluated from the emission spectra of the electroluminescent device. Color space coordinates of emitted light of pure phosphor and phosphor modified by DPP were plotted into the CIE space for better visualization of the color change. It was found that the presence of fluorophore increased the value of measured quantity—absolute spectral irradiance—more than seven times at 587 nm which corresponds to the maximum of fluorescence emission of DPP. This approach provides useful tool to obtain colors of various wavelengths and therefore various hues without the need to look for new challenging and expensive chemical modifications of the phosphor.     

Construction of artificial signal transducers on a lectin surface by post-photoaffinity-labeling modification for fluorescent saccharide biosensors

A new general method, post-photoaffinity-labeling modification (PPALM), for constructing fluorescent saccharide biosensors based on naturally occurring saccharide-binding proteins, lectins, is described in detail. An active-site-directed incorporation of a masked reactive site into a lectin was conducted by using a photoaffinity labeling technique followed by demasking and then chemical modification to yield a fluorescent lectin. Two photoaffinity labeling reagents were designed and synthesized in this study. The labeling reagent with a photoreactive site appended through a disulfide link to a mannoside unit was bound to the saccharide-binding pocket of the lectin concanavalin A (Con A). After light irradiation, the mannoside unit was cleaved by reduction. The unique thiol group thus produced was site-specifically modified with various fluorescent groups (dansyl, coumarin, or dimethylaminobenzoate derivatives) to afford fluorescent Con As. The labeling site was characterized by protease-catalyzed digestion followed by HPLC, MALDI-TOF MS, and tandem mass-mass spectrometry; these methods indicated that the photolabeling step is remarkably site specific. Strong fluorescence was observed in the engineered Con A with a fluorophore, and the emission changed sensitively upon saccharide complexation. The binding constants for various saccharides were determined by fluorescence titration and demonstrated that the binding selectivity and affinity of the engineered Con As are comparable to those of native Con A. The red shift of the emission maximum, the decrease in the fluorescence anisotropy of the dansyl unit, and the increase in the twisted intramolecular charge transfer emission caused by sugar binding to the engineered Con A explicitly indicate that the microenvironment of the appended fluorophores changes from a restricted and relatively hydrophobic environment into a rather freely mobile and hydrophilic environment.     

A dual role of phenylboronic acid as a receptor for carbohydrates as well as a quencher for neighboring pyrene fluorophore

A simple amino acid based compound (1) containing a phenyl boronic group and pyrene fluorophore showed an enhanced fluorescence in aqueous solutions at physiological pH through suppression of the photoinduced electron transfer from pyrene to boronic acid on carbohydrate binding. The compound exhibited an interesting fluorescence change depending on pH with decreased emission intensity at acidic pH but enhanced emission intensity at basic pH unlike the fluorescent carbohydrate chemosensors using a PET process with amine and aryl-boronic acid. We have characterized a dual role of phenylboronic acid as a receptor for carbohydrates as well as a quencher for the fluorescence of pyrene fluorophore.     

Fluorescent dye guest-host effects in advanced ferroelectric liquid crystals

Previous work has shown that guest-host ferroelectric systems incorporating dichroically absorbing dyes are suitable for use in colour display applications. These utilize either the dichroic absorption of a conventional dye, or the emission of a fluorescent dye. We present here the electrooptical properties of several advanced ferroelectric liquid crystals doped with a new fluorescent dye, coloured blue in emission. The data consists of measurements of tilt angle, response time, spontaneous polarization, and rotational viscosity, from which we conclude that certain hosts are not adversely affected by the fluorescent dopants. These results are then discussed in connection with the use of these mixtures in two novel colour display configurations, which are also presented, utilizing either the dichroic absorption or the polarized fluorescence of the fluorophore guests.     

Attachment of an electron-withdrawing fluorophore to a cryptand for modulation of fluorescence signaling

The laterally nonsymmetric aza cryptand synthesized by condensing tris(2-aminoethyl)amine (tren) with tris[2-[(3-(oxomethyl)phenyl)oxy]ethyl]mine readily forms mononuclear inclusion complexes with both transition- and main-group-metal ions. The fluorophore 7-nitrobenz-2-oxa-1,3-diazole is attached to one of the secondary amines, to give an integrated fluorophore-receptor configuration. The fluorophoric system does not show any appreciable emission when excited due to an efficient photoinduced intramolecular electron transfer (PET) from the nitrogen lone pair. When a metal ion enters the cavity, the PET is blocked, causing recovery of fluorescence; Cd(II) gives the highest quantum yield. The fluorophore, with pi-accepting ability, drastically alters the binding property of the cryptand. With perchlorate or tetrafluoroborate salts of Cd(II), the metal ion enters the cavity, causing recovery of fluorescence. However, in the presence of coordinating ions such as Cl-, N3-, and SCN-, the metal ion comes out of the cavity, causing PET to take place once again, and the fluorescence is lost. Thus, translocation of Cd(II) between the inside and outside of the cryptand cavity can lead to a reversible fluorescence on/off situation.     

Hyperbranched polyyne containing naphthalimide moiety as a fluorescent chemosensor for mercury ion

The development of multidimentional conjugated polymers as fluorescent sensor has been extremely attractive for detecting toxic ion in trace level. In this paper, a new hyperbranched polyyne with polytris(4-ethynylphenyl) amine (PTEPA) as the core, benzoyl thiourea-naphthalimide (NAP) as Hg (II) detected unit was designed and synthesized. The addition of Hg (II) ion transforms the thiourea unit of the chemodosimeter under THF conditions into an imidazoline moiety that is a much less electron-donating group, and hence results in a reduction in electron delocalization within the fluorophore. The emission maximum exhibits blue-shift and increase of fluorescent intensity. To confirm selectivity of the sensor towards mercury ions, it was also titrated with other divalent metal ions. No significant change was observed in the fluorescence spectra.     

Gold nanoparticle-fluorophore complex for conditionally fluorescing signal mediator

Fluorescent contrast agents with high specificity and sensitivity are valuable for accurate disease detection and diagnosis. Spherical gold nanoparticles (GNPs) can be smartly utilized for developing highly effective agents. The strong electromagnetic (plasmon) field on their surface can be very effective in influencing the electrons of fluorophores and, thus, manipulating the fluorescence output (i.e., either quenching or enhancement). Fluorescence quenching can be used for negative sensing, or for conditional de-quenching to increase the specificity. Fluorescence enhancement allows sensing to be more sensitive. The level of fluorescence alteration depends on the GNP size, the excitation and emission wavelengths and quantum yield of the fluorophore, and the distance between the GNP and the fluorophore. To understand the mechanisms of the fluorescence change by GNP, we have theoretically analyzed the parameters involved in the fluorescence alteration for commonly used fluorophores, with an emphasis on quenching. The results showed that the fluorescence of fluorophores with the excitation (Ex) and emission (Ex) wavelengths close to the GNP resonance peak tended to be significantly quenched by GNPs. For those fluorophores emitting fluorescence in red or near infrared, to achieve quenching, the distance between GNP and the fluorophore was required to be very short. In general, a shorter distance resulted in more quenching. Bigger GNPs require a shorter distance to achieve the same level of quenching. The fluorescence of a fluorophore with a lower quantum yield (especially the one with emission in far-red or near-infrared) is more difficult to be quenched by GNPs (requires very short distance). Instead, it can be enhanced. Based on the theoretical study, we have developed a near-infrared contrast agent, i.e., Cypate conjugated GNP via a short peptide spacer. Normally the fluorescence of Cypate was quenched. The spacer has a motif of a substrate for urokinase type plasminogen activator (uPA; cancer-secreting enzyme). This contrast agent emits fluorescence only in the presence of uPA, where the uPA cleaves the spacer. This design can be used in characterization of the cancer type and also in diagnosing other diseases with signature enzymes.     

Fluorescent dye guest-host effects in advanced ferroelectric liquid crystals

Abstract

Previous work has shown that guest-host ferroelectric systems incorporating dichroically absorbing dyes are suitable for use in colour display applications. These utilize either the dichroic absorption of a conventional dye, or the emission of a fluorescent dye. We present here the electrooptical properties of several advanced ferroelectric liquid crystals doped with a new fluorescent dye, coloured blue in emission. The data consists of measurements of tilt angle, response time, spontaneous polarization, and rotational viscosity, from which we conclude that certain hosts are not adversely affected by the fluorescent dopants. These results are then discussed in connection with the use of these mixtures in two novel colour display configurations, which are also presented, utilizing either the dichroic absorption or the polarized fluorescence of the fluorophore guests.     

Constrained photophysics of 3-acetyl-4-oxo-6,7-dihydro-12H indolo-[2,3-a] quinolizine in micellar environments: a spectrofluorometric study

Photophysical properties of 3-acetyl-4-oxo-6,7-dihydro-12H indolo-[2,3-a] quinolizine (AODIQ) have been studied in different aqueous micellar environments using steady-state and time-resolved emission spectroscopy. The charge transfer (CT) fluorescence exhibits appreciable hypsochromic shift, along with an enhancement in the fluorescence intensity in all the micellar media. This is associated with an increase in the fluorescence anisotropy (r), which suggests that the fluorophore molecule experiences motionally restricted environments upon binding with the micelles. Fluorescence spectral position and fluorescence quenching studies suggest that the fluorescing moiety does not penetrate into the core of the micellar units; rather it binds at the micelle-water interfacial region. The binding constant and free energy change during probe-micelle binding have been evaluated from relevant fluorescence data. Light has been thrown on the mode of action of urea on micelle bound probes. The results are interpreted in terms of the model that urea displaces water molecules from the micellar interface and the consequent destabilization leads to the expulsion of the probe molecules from the interfacial region. Polarity and viscosity of the microenvironments around the probe have been determined in the micellar systems.