Postfunctionalization of periodic mesoporous silica SBA-1 with magnesium(II) and iron(II) silylamides

Magnesium silylamide complexes Mg[N(SiHMe(2))(2)](2)(THF)(2) and Mg[N(SiPhMe(2))(2)](2) were synthesized according to transsilylamination and alkane elimination protocols, respectively, utilizing Mg[N(SiMe(3))(2)](2)(THF)(2) and [Mg(n-Bu)](2) as precursors. Cage-like periodic mesoporous silica SBA-1 was treated with donor solvent-free dimeric [Mg{N(SiHMe(2))(2)}(2)](2), [Mg{N(SiMe(3))(2)}(2)](2) and monomeric Mg[N(SiPhMe(2))(2)](2), producing hybrid materials [Mg(NR(2))(2)]@SBA-1 with magnesium located mainly at the external surface. Consecutive grafting of [Mg{N(SiHMe(2))(2)}(2)](2) and [Fe(II){N(SiHMe(2))(2)}(2)](2) onto SBA-1 led to heterobimetallic hybrid materials which exhibit complete consumption of the isolated surface silanol groups, evidencing intra-cage surface functionalization. All materials were characterized by DRIFT spectroscopy, nitrogen physisorption and elemental analysis.     

Iron-arylimide clusters [Fe(m)()(NAr)(n)Cl(4)](2)(-) (m,n = 2, 2; 3, 4; 4, 4) from a ferric amide precursor: synthesis,characterization, and comparison to Fe-S chemistry

Tetrahedral FeCl[N(SiMe(3))(2)](2)(THF) (2), prepared from FeCl(3) and 2 equiv of Na[N(SiMe(3))(2)] in THF, is a useful ferric starting material for the synthesis of weak-field iron-imide (Fe-NR) clusters. Protonolysis of 2 with aniline yields azobenzene and [Fe(2)(mu-Cl)(3)(THF)(6)](2)[Fe(3)(mu-NPh)(4)Cl(4)] (3), a salt composed of two diferrous monocations and a trinuclear dianion with a formal 2 Fe(III)/1 Fe(IV) oxidation state. Treatment of 2 with LiCl, which gives the adduct [FeCl(2)(N(SiMe(3))(2))(2)](-) (isolated as the [Li(TMEDA)(2)](+) salt), suppresses arylamine oxidation/iron reduction chemistry during protonolysis. Thus, under appropriate conditions, the reaction of 1:1 2/LiCl with arylamine provides a practical route to the following Fe-NR clusters: [Li(2)(THF)(7)][Fe(3)(mu-NPh)(4)Cl(4)] (5a), which contains the same Fe-NR cluster found in 3; [Li(THF)(4)](2)[Fe(3)(mu-N-p-Tol)(4)Cl(4)] (5b); [Li(DME)(3)](2)[Fe(2)(mu-NPh)(2)Cl(4)] (6a); [Li(2)(THF)(7)][Fe(2)(mu-NMes)(2)Cl(4)] (6c). [Li(DME)(3)](2)[Fe(4)(mu(3)-NPh)(4)Cl(4)] (7), a trace product in the synthesis of 5a and 6a, forms readily as the sole Fe-NR complex upon reduction of these lower nuclearity clusters. Products were characterized by X-ray crystallographic analysis, by electronic absorption, (1)H NMR, and M?ssbauer spectroscopies, and by cyclic voltammetry. The structures of the Fe-NR complexes derive from tetrahedral iron centers, edge-fused by imide bridges into linear arrays (5a,b; 6a,c) or the condensed heterocubane geometry (7), and are homologous to fundamental iron-sulfur (Fe-S) cluster motifs. The analogy to Fe-S chemistry also encompasses parallels between Fe-mediated redox transformations of nitrogen and sulfur ligands and reductive core conversions of linear dinuclear and trinuclear clusters to heterocubane species and is reinforced by other recent examples of iron- and cobalt-imide cluster chemistry. The correspondence of nitrogen and sulfur chemistry at iron is intriguing in the context of speculative Fe-mediated mechanisms for biological nitrogen fixation.     

Scandium alkyl and amide complexes containing a cyclen-derived (NNNN) macrocyclic ligand: synthesis, structure and ring-opening polymerization activity toward lactide monomers

Cyclic polyamine 1,4,7-trimethyl-1,4,7,10-tetraazacyclododecane, (Me(3)TACD)H (= Me(3)[12]aneN(4)), reacted with [K{N(SiHMe(2))(2)}] in benzene-d(6) to give [K{(Me(3)TACD)SiMe(2)N(SiHMe(2))}] (1) under hydrogen evolution. Single-crystal X-ray diffraction of 1 shows a dinuclear structure in the solid state, featuring a bridging μ-amido and a weak β-agostic Si-H bond. 1,7-Dimethyl-1,4,7,10-tetraazacyclododecane (Me(2)TACD)H(2) (= Me(2)[12]aneN(4)) and (Me(3)TACD)H were reacted with [Sc{N(SiHMe(2))(2)}(3)(thf)] in benzene-d(6) to give [{(Me(2)TACD)SiMe(2)N(SiHMe(2))}Sc{N(SiHMe(2))(2)}] (2) and [(Me(3)TACD)Sc{N(SiHMe(2))(2)}(2)SiMe(2)] (3), respectively. Both compounds are monomeric in solution and X-ray diffraction studies showed the scandium metal centers to be six-coordinate. The scandium alkyl complex [Sc(Me(3)TACD)(CH(2)SiMe(3))(2)] (4) was obtained by reacting (Me(3)TACD)H with [Sc(CH(2)SiMe(3))(3)(thf)] in benzene-d(6). The scandium amide complexes 2 and 3 catalyzed the ring-opening polymerization (ROP) of meso-lactide to give syndiotactic polylactides.     

Dinuclear cyano complexes of cobalt(III) and Iron(III) containing noninnocent 1,2,4,5-tetrakis(2-pyridinecarboxamido)benzene bridging ligands

Two new dinucleating ligands 1,2,4,5-tetrakis(2-pyridinecarboxamido)benzene, H(4)(tpb), and 1,2,4,5-tetrakis(4-tert-butyl-2-pyridinecarboxamido)benzene, H(4)(tbpb), have been synthesized, and the following dinuclear cyano complexes of cobalt(III) and iron(III) have been isolated: Na(2)[Co(III)(2)(tpb)(CN)(4)] (1); [N(n-Bu)(4)](2)[Co(III)(2)(tbpb)(CN)(4)] (2); [Co(III)(2)(tbpb(ox2))(CN)(4)] (3); [N(n-Bu)(4)](2)[Fe(III)(2)(tpb)(N(3))(4)] (4); [N(n-Bu)(4)](2)[Fe(III)(2)(tpb)(CN)(4)] (5); [N(n-Bu)(4)](2)[Fe(III)(2)(tbpb)(CN)(4)] (6). Complexes 2-4 and 6 have been structurally characterized by X-ray crystallography at 100 K. From electrochemical and spectroscopic (UV-vis, IR, EPR, M?ssbauer) and magnetochemical investigations it is established that the coordinated central 1,2,4,5-tetraamidobenzene entity in the cyano complexes can be oxidized in two successive one-electron steps yielding paramagnetic (tbpb(ox1))(3)(-) and diamagnetic (tbpb(ox2))(2)(-) anions. Thus, complex 6 exists in five characterized oxidation levels: [Fe(III)(2)(tbpb(ox2))(CN)(4)](0) (S = 0); [Fe(III)(2)(tbpb(ox1))(CN)(4)](-) (S = (1)/(2)); [Fe(III)(2)(tbpb)(CN)(4)](2)(-) (S = 0); [Fe(III)Fe(II)(tbpb)(CN)(4)](3)(-) (S = (1)/(2)); [Fe(II)(2)(tbpb)(CN)(4)](4)(-) (S = 0). The iron(II) and (III) ions are always low-spin configurated. The electronic structure of the paramagnetic iron(III) ions and the exchange interaction of the three-spin system [Fe(III)(2)(tbpb(ox1))(CN)(4)](-) are characterized in detail. Similarly, for 2 three oxidation levels have been identified and fully characterized: [Co(III)(2)(tbpb)(CN)(4)](2)(-) (S = 0); [Co(III)(2)(tbpb(ox1))(CN)(4)](-) (S = (1)/(2)); [Co(III)(2)(tbpb(ox2))(CN)(4)](0). The crystal structures of 2 and 3 clearly show that the two electron oxidation of 2 yielding 3 affects only the central tetraamidobenzene part of the ligand.     

Unusual iron(III) ate complexes stabilized by Li-pi interactions

Several iron(III) complexes incorporating diamidoether ligands are described. The reaction between [Li(2)[RN(SiMe(2))](2)O] and FeX(3) (X=Cl or Br; R=2,4,6-Me(3)Ph or 2,6-iPr(2)Ph) form unusual ate complexes, [FeX(2)Li[RN(SiMe(2))](2)O](2) (2, X=Cl, R=2,4,6-Me(3)Ph; 3, X=Br, R=2,4,6-Me(3)Ph; 4, X=Cl, R=2,6-iPr(2)Ph) which are stabilized by Li-pi interactions. These dimeric iron(III)-diamido complexes exhibit magnetic behaviour characteristic of uncoupled high spin (S= 5/2 ) iron(III) centres. They also undergo halide metathesis resulting in reduced iron(II) species. Thus, reaction of 2 with alkyllithium reagents leads to the formation of iron(II) dimer [Fe[Me(3)PhN(SiMe(2))](2)O](2) (6). Similarly, the previously reported iron(III)-diamido complex [FeCl[tBuN(SiMe(2))](2)O](2) (1) reacts with LiPPh(2) to yield the iron(II) dimer [Fe[tBuN(SiMe(2))](2)O](2) but reaction with LiNPh(2) gives the iron(II) product [Fe(2)(NPh(2))(2)[tBuN(SiMe(2))](2)O] (5). Some redox chemistry is also observed as side reactions in the syntheses of 2-4, yielding THF adducts of FeX(2): the one-dimensional chain [FeBr(2)(THF)(2)](n) (7) and the cluster [Fe(4)Cl(8)(THF)(6)]. The X-ray crystal structures of 3, 5 and 7 are described.     

Surface organobarium and organomagnesium chemistry on periodic mesoporous silica MCM-41: convergent and sequential approaches traced by molecular models

The alkaline earth metal alkyl complexes [Ba(AlEt(4))(2)](n) and Mg(AlMe(4))(2) were directly grafted onto periodic mesoporous silica MCM-41, which had been dehydroxylated at 270 °C (specific surface area a(s): 1023 m(2) g(-1); pore volume V(p): 1.08 cm(3) g(-1); main pore diameter 3.4 nm). Alternatively, barium alkyl surface species were generated by sequential grafting of MCM-41 with Ba[N(SiHMe(2))(2)](2)(thf)(4) and AlEt(3) to yield the hybrid material AlEt(3)@Ba[N(SiHMe(2))(2)](2)(thf)(4)@MCM-41. For a better understanding of the surface chemistry, AlEt(3)@MCM-41 was also accessed. All hybrid materials were analyzed by diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy, elemental analysis, nitrogen physisorption, and solid-state NMR spectroscopy; this clearly revealed distinct surface chemistry for the alkylaluminate-treated materials [Ba(AlEt(4))(2)]@MCM-41 and Mg(AlMe(4))(2)@MCM-41. In an attempt to mimic the surface chemistry, the organometallic precursors were treated with HOSi(OtBu)(3). The reaction of equimolar amounts of {Ba[N(SiHMe(2))(2)](2)}(n) and HOSi(OtBu)(3) produced a mixed silylamido/siloxide cluster of Ba(3)[OSi(OtBu)(3)](3)[N(SiHMe(2))(2)](3) with bridging-only siloxide ligands as well as one bridging and two terminal silylamido ligands. The Schlenk equilibrium was found to govern the [Ba(AlEt(4))(2)](n)-HOSi(OtBu)(3) and Mg(AlMe(4))(2)-HOSi(OtBu)(3) reactions, leading to the isolation of complexes of [Ba(AlEt(4))(2) (toluene)](2) and Mg[OSi(OtBu)(3))](2)(AlMe(3))(2), respectively. Allowing for a donor-induced cleavage of Mg(AlMe(4))(2), the reaction of [MgMe(2)] with one or two equivalents of HOSi(OtBu)(3) was studied. While putative Mg[OSi(OtBu)(3)](Me) and Mg[OSi(OtBu)(3)](2) could not be crystallized from the reaction mixtures, cluster complexes Mg(5)(O)[OSi(OtBu)(3)](5)Me(3) and Mg(4)(OH)(2)[OSi(OtBu)(3)](6) could be unambiguously identified by X-ray crystallography.     

Synthesis and reactions of triphenylsilanethiolato complexes of manganese(II), iron(II), cobalt(II), and nickel(II)

Reactions of Fe[N(SiMe(3))(2)](2) with 1 and 2 equiv of Ph(3)SiSH in hexane afforded dinuclear silanethiolato complexes, [Fe(N(SiMe(3))(2))(mu-SSiPh(3))](2) (1) and [Fe(SSiPh(3))(mu-SSiPh(3))](2) (2), respectively. Various Lewis bases were readily added to 2, generating mononuclear adducts, Fe(SSiPh(3))(2)(L)(2) [L = CH(3)CN (3a), 4-(t)BuC(5)H(4)N (3b), PEt(3) (3c), (LL) = tmeda (3d)]. From the analogous reactions of M[N(SiMe(3))(2)](2) (M = Mn, Co) and [Ni(NPh(2))(2)](2) with Ph(3)SiSH in the presence of TMEDA, the corresponding silanethiolato complexes, M(SSiPh(3))(2)(tmeda) [M = Mn (4), Co (5), Ni (6)], were isolated. Treatment of 3a with (PPh(4))(2)[MoS(4)] or (NEt(4))(2)[FeCl(4)] resulted in formation of a linear trinuclear Fe-Mo-Fe cluster (PPh(4))(2)[MoS(4)(Fe(SSiPh(3))(2))(2)] (7) or a dinuclear complex (NEt(4))(2)[Fe(2)(SSiPh(3))(2)Cl(4)] (8). On the other hand, the reaction of 3a with [Cu(CH(3)CN)(4)](PF(6)) gave a cyclic tetranuclear copper cluster Cu(4)(SSiPh(3))(4) (9), where silanethiolato ligands were transferred from iron to copper. Silicon-sulfur bond cleavage was found to occur when the cobalt complex 5 was treated with (NBu(4))F in THF, and a cobalt-sulfido cluster Co(6)(mu(3)-S)(8)(PPh(3))(6) (10) was isolated upon addition of PPh(3) to the reaction system. The silanethiolato complexes reported here are expected to serve as convenient precursors for sulfido cluster synthesis.     

Structure and Properties of [Fe(4)S(4){2,6-bis(acylamino)benzenethiolato-S}(4)](2)(-) and [Fe(2)S(2){2,6-bis(acylamino)benzenethiolato-S}(4)](2)(-): Protection of the Fe-S Bond by Double NH.S Hydrogen Bonds

Iron-sulfur clusters containing a singly or doubly NH.S hydrogen-bonded arenethiolate ligand, [Fe(4)S(4)(S-2-RCONHC(6)H(4))(4)](2)(-) (R = CH(3), t-Bu, CF(3)), [Fe(4)S(4){S-2,6-(RCONH)(2)C(6)H(3)}(4)](2)(-), [Fe(2)S(2)(S-2-RCONHC(6)H(4))(4)](2)(-) (R = CH(3), t-Bu, CF(3)), and [Fe(2)S(2){S-2,6-(RCONH)(2)C(6)H(3)}(4)](2)(-), were synthesized as models of bacterial [4Fe-4S] and plant-type [2Fe-2S] ferredoxins. The X-ray structures and IR spectra of (PPh(4))(2)[Fe(4)S(4){S-2,6-(CH(3)CONH)(2)C(6)H(3)}(4)].2CH(3)CN and (NEt(4))(2)[Fe(2)S(2){S-2,6-(t-BuCONH)(2)C(6)H(3)}(4)] indicate that the two amide NH groups at the o,o'-positions are directed to the thiolate sulfur atom and form double NH.S hydrogen bonds. The NH.S hydrogen bond contributes to the positive shift of the redox potential of not only (Fe(4)S(4))(+)/(Fe(4)S(4))(2+) but also (Fe(4)S(4))(2+)/(Fe(4)S(4))(3+) in the [4Fe-4S] clusters as well as (Fe(2)S(2))(2+)/(Fe(2)S(2))(3+) in the [2Fe-2S] clusters. The doubly NH.S hydrogen-bonded thiolate ligand effectively prevents the ligand exchange reaction by benzenethiol because the two amide NH groups stabilize the thiolate by protection from dissociation.     

Rational synthesis of [Ge9{Si(SiMe3)3}3]- from its parent Zintl ion Ge9(4-)

Reported is the first rational synthesis of a trisubstituted deltahedral Zintl ion, [Ge(9){Si(SiMe(3))(3)}(3)](-) in this case, by the addition of the three substituents in a reaction of the parent naked deltahedral Zintl ion Ge(9)(4-) with {(Me(3)Si)(3)Si}Cl. The new species were crystallized and structurally characterized in [K(2,2,2-crypt)](2)[Ge(9){Si(SiMe(3))(3)}(3)] (monoclinic, P2(1)/c, a = 26.497(3) ?, b = 24.090(2) ?, c = 29.268(3) ?, β = 113.888(2)°, V = 17082(3) ?(3), Z = 8, R1/wR2 = 0.0436/0.0812 for the observed data and 0.1023/0.1010 for all data).     

Synthesis with structural and electronic characterization of homoleptic Fe(II)- and Fe(III)-fluorinated phenolate complexes

Four Fe(III) compounds and one Fe(II) compound containing mononuclear, homoleptic, fluorinated phenolate anions of the form [Fe(OAr)(m)](n-) have been prepared in which Ar(F) = C(6)F(5) and Ar' = 3,5-C(6)(CF(3))(2)H(3): (Ph(4)P)(2)[Fe(OAr(F))(5)], 1, (Me(4)N)(2)[Fe(OAr(F))(5)], 2, {K(18-crown-6)}(2)[Fe(OAr(F))(5)], 3a, {K(18-crown-6)}(2)[Fe(OAr')(5)], 3b, and {K(18-crown-6)}(2)[Fe(OAr(F))(4)], 6. Two dinuclear Fe(III) compounds have also been prepared: {K(18-crown-6)}(2)[(OAr(F))(3)Fe(μ(2)-O)Fe(OAr(F))(3)], 4, and {K(18-crown-6)}(2)[(OAr(F))(3)Fe(μ(2)-OAr(F))(2)Fe(OAr(F))(3)], 5. These compounds have been characterized with UV-vis spectroscopy, elemental analysis, Evans method susceptibility, and X-ray crystallography. All-electron, geometry-optimized DFT calculations on four [Ti(IV)(OAr)(4)] and four [Fe(III)(OAr)(4)](-) species (Ar = 2,3,5,6-C(6)Me(4)H, C(6)H(5), 2,4,6-C(6)Cl(3)H(2), C(6)F(5)) with GGA-BP and hybrid B3LYP basis sets demonstrated that, under D(2d) symmetry, π donation from the O 2p orbitals is primarily into the d(xy) and d(z(2)) orbitals. The degree of donation is qualitatively consistent with expectations based on ligand Br?nsted basicity and supports the contention that fluorinated phenolate ligands facilitate isolation of nonbridged homoleptic complexes due to their reduced π basicity at oxygen.     

Iron-mediated hydrazine reduction and the formation of iron-arylimide heterocubanes

The reaction of Fe(N{SiMe(3)}(2))(2) (1) with 1 equiv of arylthiol (ArSH) results in material of notional composition Fe(SAr)(N{SiMe(3)}(2)) (2), from which crystalline Fe(2)(μ-SAr)(2)(N{SiMe(3)}(2))(2)(THF)(2) (Ar = Mes) can be isolated from tetrahydrofuran (THF) solvent. Treatment of 2 with 0.5 equiv of 1,2-diarylhydrazine (Ar'NH-NHAr', Ar' = Ph, p-Tol) yields ferric-imide-thiolate cubanes Fe(4)(μ(3)-NAr')(4)(SAr)(4) (3). The site-differentiated, 1-electron reduced iron-imide cubane derivative [Fe(THF)(6)][Fe(4)(μ(3)-N-p-Tol)(4)(SDMP)(3)(N{SiMe(3)}(2))](2) ([Fe(THF)(6)][4](2); DMP = 2,6-dimethylphenyl) can be isolated by adjusting the reaction stoichiometry of 1/ArSH/Ar'NHNHAr' to 9:6:5. The isolated compounds were characterized by a combination of structural (X-ray diffraction), spectroscopic (NMR, UV-vis, Mo?ssbauer, EPR), and magnetochemical methods. Reactions with a range of hydrazines reveal complex chemical behavior that includes not only N-N bond reduction for 1,2-di- and trisubstituted arylhydrazines, but also catalytic disproportionation for 1,2-diarylhydrazines, N-C bond cleavage for 1,2-diisopropylhydrazine, and no reaction for hindered and tetrasubstituted hydrazines.     

Bis[tetraruthenium(IV)]-containing polyoxometalates: [{Ru(IV)4O6(H2O)9}2Sb2W20O68(OH)2]4- and [{Ru(IV)4O6(H2O)9}2{Fe(H2O)2}2{β-TeW9O33}2H]-

The reaction of [Sb(2)W(22)O(74)(OH)(2)](12-) and [Fe(4)(H(2)O)(10)(β-TeW(9)O(33))(2)](4-) with (NH(4))(2)[RuCl(6)] in aqueous solution resulted in the novel ruthenium(IV)-containing polyanions [{Ru(IV)(4)O(6)(H(2)O)(9)}(2)Sb(2)W(20)O(68)(OH)(2)](4-) and [{Ru(IV)(4)O(6)(H(2)O)(9)}(2){Fe(H(2)O)(2)}(2){β-TeW(9)O(33)}(2)H](-), exhibiting two cationic, adamantane-like, tetraruthenium(IV) units {Ru(4)O(6)(H(2)O)(9)}(4+) bound to the respective polyanion in an external, highly accessible fashion.     

A charge-transfer-induced spin transition in a discrete complex: the role of extrinsic factors in stabilizing three electronic isomeric forms of a cyanide-bridged co/fe cluster

A series of bimetallic, trigonal bipyramidal clusters of type {[Co(N-N)(2)](3)[Fe(CN)(6)](2)} are reported. The reaction of {Co(tmphen)(2)}(2+) with [Fe(CN)(6)](3)(-) in MeCN affords {[Co(tmphen)(2)](3)[Fe(CN)(6)](2)} (1). The cluster can exist in three different solid-state phases: a red crystalline phase, a blue solid phase obtained by exposure of the red crystals to moisture, and a red solid phase obtained by desolvation of the blue solid phase in vacuo. The properties of cluster 1 are extremely sensitive to both temperature and solvent content in each of these phases. Variable-temperature X-ray crystallography; (57)Fe Mossbauer, vibrational, and optical spectroscopies; and magnetochemical studies were used to study the three phases of 1 and related compounds, Na{[Co(tmphen)(2)](3)[Fe(CN)(6)](2)}(ClO(4))(2) (2), {[Co(bpy)(2)](3)[Fe(CN)(6)](2)}[Fe(CN)(6)](1/3) (3), and {[Ni(tmphen)(2)](3)[Fe(CN)(6)](2)} (4). The combined structural and spectroscopic investigation of 1-4 leads to the unambiguous conclusion that 1 can exist in different electronic isomeric forms, {Co(III)(2)Co(II)Fe(II)(2)} (1A), {Co(III)Co(II)(2)Fe(III)Fe(II)} (1B), and {Co(II)(3)Fe(III)(2)} (1C), and that it can undergo a charge-transfer-induced spin transition (CTIST). This is the first time that such a phenomenon has been observed for a Co/Fe molecule.     

Synthesis, crystal structures, and magnetic properties of a new family of heterometallic cyanide-bridged Fe(III)2M(II)2 (M=Mn, Ni, and Co) square complexes

New heterobimetallic tetranuclear complexes of formula [Fe(III){B(pz)(4)}(CN)(2)(μ-CN)Mn(II)(bpy)(2)](2)(ClO(4))(2)·CH(3)CN (1), [Fe(III){HB(pz)(3)}(CN)(2)(μ-CN)Ni(II)(dmphen)(2)](2)(ClO(4))(2)·2CH(3)OH (2a), [Fe(III){B(pz)(4)}(CN)(2)(μ-CN)Ni(II)(dmphen)(2)](2)(ClO(4))(2)·2CH(3)OH (2b), [Fe(III){HB(pz)(3)}(CN)(2)(μ-CN)Co(II)(dmphen)(2)](2)(ClO(4))(2)·2CH(3)OH (3a), and [Fe(III){B(pz)(4)}(CN)(2)(μ-CN)Co(II)(dmphen)(2)](2)(ClO(4))(2)·2CH(3)OH (3b), [HB(pz)(3)(-) = hydrotris(1-pyrazolyl)borate, B(Pz)(4)(-) = tetrakis(1-pyrazolyl)borate, dmphen = 2,9-dimethyl-1,10-phenanthroline, bpy = 2,2'-bipyridine] have been synthesized and structurally and magnetically characterized. Complexes 1-3b have been prepared by following a rational route based on the self-assembly of the tricyanometalate precursor fac-[Fe(III)(L)(CN)(3)](-) (L = tridentate anionic ligand) and cationic preformed complexes [M(II)(L')(2)(H(2)O)(2)](2+) (L' = bidentate α-diimine type ligand), this last species having four blocked coordination sites and two labile ones located in cis positions. The structures of 1-3b consist of cationic tetranuclear Fe(III)(2)M(II)(2) square complexes [M = Mn (1), Ni (2a and 2b), Co (3a and 3b)] where corners are defined by the metal ions and the edges by the Fe-CN-M units. The charge is balanced by free perchlorate anions. The [Fe(L)(CN)(3)](-) complex in 1-3b acts as a ligand through two cyanide groups toward two divalent metal complexes. The magnetic properties of 1-3b have been investigated in the temperature range 2-300 K. A moderately strong antiferromagnetic interaction between the low-spin Fe(III) (S = 1/2) and high-spin Mn(II) (S = 5/2) ions has been found for 1 leading to an S = 4 ground state (J(1) = -6.2 and J(2) = -2.7 cm(-1)), whereas a moderately strong ferromagnetic interaction between the low-spin Fe(III) (S = 1/2) and high-spin Ni(II) (S = 1) and Co(II) (S = 3/2) ions has been found for complexes 2a-3b with S = 3 (2a and 2b) and S = 4 (3a and 3b) ground spin states [J(1) = +21.4 cm(-1) and J(2) = +19.4 cm(-1) (2a); J(1) = +17.0 cm(-1) and J(2) = +12.5 cm(-1) (2b); J(1) = +5.4 cm(-1) and J(2) = +11.1 cm(-1) (3a); J(1) = +8.1 cm(-1) and J(2) = +11.0 cm(-1) (3b)] [the exchange Hamiltonian being of the type H? = -J(S?(i)·S?(j))]. Density functional theory (DFT) calculations have been used to substantiate the nature and magnitude of the exchange magnetic coupling observed in 1-3b and also to analyze the dependence of the exchange magnetic coupling on the structural parameters of the Fe-C-N-M skeleton.     

Extremely bulky amido-group 14 element chloride complexes: potential synthons for low oxidation state main group chemistry

The preparation of a series of extremely bulky secondary amines, Ar*N(H)SiR(3) (Ar* = C(6)H(2){C(H)Ph(2)}(2)Me-2,6,4; R(3) = Me(3), MePh(2) or Ph(3)) is described. Their deprotonation with either LiBu(n), NaH or KH yields alkali metal amide complexes, several monomeric examples of which, [Li(L){N(SiMe(3))(Ar*)}] (L = OEt(2) or THF), [Na(THF)(3){N(SiMe(3))(Ar*)}] and [K(OEt(2)){N(SiPh(3))(Ar*)], have been crystallographically characterised. Reactions of the lithium amides with germanium, tin or lead dichloride have yielded the first structurally characterised two-coordinate, monomeric amido germanium(II) and tin(II) chloride complexes, [{(SiR(3))(Ar*)N}ECl] (E = Ge or Sn; R = Me or Ph), and a chloride bridged amido-lead(II) dimer, [{[(SiMe(3))(Ar*)N]Pb(μ-Cl)}(2)]. DFT calculations on [{(SiMe(3))(Ar*)N}GeCl] show its HOMO to exhibit Ge lone pair character and its LUMO to encompass its Ge based p-orbital. A series of bulky amido silicon(IV) chloride complexes have also been prepared and several examples, [{(SiR(3))(Ar*)N}SiCl(3)] (R(3) = Me(3), MePh(2)) and [{(SiMe(3))(Ar*)N}SiHCl(2)], were crystallographically characterised. The sterically hindered group 14 complexes reported in this study hold significant potential as precursors for kinetically stabilised low oxidation state and/or low coordination number group 14 complexes.     

Synthesis, structure and reactivity of novel pyridazine-coordinated diiron bridging carbene complexes

[{mu-(Pyridazine-N(1):N(2))}Fe(2)(mu-CO)(CO)(6)](1) reacts with aryllithium reagents, ArLi (Ar = C(6)H(5), m-CH(3)C(6)H(4)) followed by treatment with Me(3)SiCl to give the novel pyridazine-coordinated diiron bridging siloxycarbene complexes [(C(4)H(4)N(2))Fe(2){mu-C(OSiMe(3))Ar}(CO)(6)](2, Ar = C(6)H(5); 3, Ar =m-CH(3)C(6)H(4)). Complex 2 reacts with HBF(4).Et(2)O at low temperature to yield a cationic bridging carbyne complex [(C(4)H(4)N(2))Fe(2)(mu-CC(6)H(5))(CO)(6)]BF(4)(4). Cationic 4 reacts with NaBH(4) in THF at low temperature to afford the diiron bridging arylcarbene complex [(C(4)H(4)N(2))Fe(2){mu-C(H)C(6)H(5)}(CO)(6)](5). Unexpectedly, the reaction of 4 with NaSCH(3) under similar conditions gave the bridging arylcarbene complex 5 and a carbonyl-coordinated diiron bridging carbene complex [Fe(2){mu-C(SCH(3))C(6)H(5)}(CO)(7)](6), while the reaction of NaSC(6)H(4)CH(3)-p with 4 affords the expected bridging arylthiocarbene complex [(C(4)H(4)N(2))Fe(2){mu-C(SC(6)H(4)CH(3)-p)C(6)H(5)}(CO)(6)](7), which can be converted into a novel diiron bridging carbyne complex with a thiolato-bridged ligand, [Fe(2)(mu-CC(6)H(5))(mu-SC(6)H(4)CH(3)-p)(CO)(6)](8). Cationic can also react with the carbonylmetal anionic compound Na(2)[Fe(CO)(4)] to yield complex 5, while the reactions of 4 with carbonylmetal anionic compounds Na[M(CO)(5)(CN)](M = Cr, Mo, W) produce the diiron bridging aryl(pentacarbonylcyanometal)carbene complexes [(C(4)H(4)N(2))Fe(2)-{mu-C(C(6)H(5))NCM(CO)(5)}(CO)(6)](9, M = Cr; 10, M = Mo; 11, M = W). The structures of complexes 2, 5, 6, 8, and 9 have been established by X-ray diffraction studies.     

Synthesis and characterization of new biphenolate and binaphtholate rare-Earth-metal amido complexes: catalysts for asymmetric olefin hydroamination/cyclization

Monomeric diolate amido yttrium complexes [Y[diolate][N(SiHMe(2))(2)](thf)(2)] can be prepared in good yield by treating [Y[N(SiHMe(2))(2)](3)(thf)(2)] with either 3,3'-di-tert-butyl-5,5',6,6'-tetramethyl-1,1'-biphenyl-2,2'-diol (H(2)(Biphen)), 3,3'-bis(2,4,6-triisopropylphenyl)-2,2'-dihydroxy-1,1'-dinaphthyl (H(2)(Trip(2)BINO)) or 3,3'-bis(2,6-diisopropylphenyl)-2,2'-dihydroxy-1,1'-dinaphthyl (H(2)(Dip(2)BINO)) in racemic and enantiopure form. The racemic complex [Y(biphen)[N(SiHMe(2))(2)](thf)(2)] dimerizes upon heating to give the heterochiral complex (R,S)-[Y(biphen)[N(SiHMe(2))(2)](thf)](2). The corresponding dimeric heterochiral lanthanum complex was the sole product in the reaction of H(2)(Biphen) with [La[N(SiHMe(2))(2)](3)(thf)(2)]. Single-crystal X-ray diffraction of both dimeric complexes revealed that the two Ln(biphen)[N(SiHMe(2))(2)](thf) fragments are connected through bridging phenolate groups of the biphenolate ligands. The two different phenolate groups undergo an intramolecular exchange process in solution leading to their equivalence on the NMR timescale. All complexes were active catalysts for the hydroamination/cyclization of aminoalkynes and aminoalkenes at elevated temperature, with [Y((R)-dip(2)bino)[N(SiHMe(2))(2)](thf)(2)] being the most active one giving enantioselectivities of up to 57 % ee. Kinetic resolution of 2-aminohex-5-ene proceeded with this catalyst with 6.4:1 trans selectivity to give 2,5-dimethylpyrrolidine with a k(rel) of 2.6.     

Iron(II) complexes with tetradentate bis(aminophenolate) ligands: synthesis and characterization, solution behavior, and reactivity with O(2)

Tetradentate bis(aminophenolate) ligands H(2)salan(X) and H(2)bapen(X) (where X refers to the para-phenolate substituent = H, Me, F, Cl) react with [Fe{N(SiMe(3))(2)}(2)] to form iron(II) complexes, which in the presence of suitable donor ligands L (L = pyridine or THF) can be isolated as the complexes [Fe(salan(X))(L)(2)] and [Fe(bapen(X))(L)(2)]. In the absence of donor ligands, either mononuclear complexes, for example, [Fe(salan(tBu,tBu))], or dinuclear complexes of the type [Fe(salan(X))](2) are obtained. The dynamic coordination behavior in solution of the complexes [Fe(salan(F))(L)(2)] and [Fe(bapen(F))(L)(2)] has been investigated by VT (1)H and (19)F NMR spectroscopy, which has revealed equilibria between isomers with different ligand coordination topologies cis-α, cis-β and trans. Exposure of the iron(II) salan(X) complexes to O(2) results in the formation of oxo-bridged iron(III) complexes of the type [{Fe(salan(X))}(2)(μ-O)] or [{Fe(salan(X))(L)}(2)(μ-O)]. The lack of catalytic activity of the iron(II) salan and bapen complexes in the oxidation of cyclohexane with H(2)O(2) as the oxidant is attributed to the rapid formation of stable and catalytically inactive oxo-bridged iron(III) complexes.     

Selective C-C coupling of Ir-ethene and Ir-carbenoid radicals

The reactivity of the paramagnetic iridium(II) complex [Ir(II)(ethene)(Me(3)tpa)](2+) (1) (Me(3)tpa=N,N,N-tris(6-methyl-2-pyridylmethyl) amine) towards the diazo compounds ethyl diazoacetate (EDA) and trimethylsilyldiazomethane (TMSDM) was investigated. The reaction with EDA gave rise to selective C--C bond formation, most likely through radical coupling of the Ir-carbenoid radical species [Ir(III){CH(.)(COOEt)}(MeCN)(Me(3)tpa)](2+) (7) and (the MeCN adduct of) 1, to give the tetracationic dinuclear complex [(MeCN)(Me(3)tpa)Ir(III){CH(COOEt)CH(2)CH(2)}Ir(III)(MeCN)(Me(3)tpa)](2+) (4). The analogous reaction with TMSDM leads to the mononuclear dicationic species [Ir(III){CH(2)(SiMe(3))}(MeCN)(Me(3)tpa)](2+) (11). This reaction probably involves a hydrogen-atom abstraction from TMSDM by the intermediate Ir-carbenoid radical species [Ir(III){CH(.)(SiMe(3))}(MeCN)(Me(3)tpa)](2+) (10). DFT calculations support pathways proceeding via these Ir-carbenoid radicals. The carbenoid-radical species are actually carbon-centered ligand radicals, with an electronic structure best described as one-electron-reduced Fischer-type carbenes. To our knowledge, this paper represents the first reactivity study of a mononuclear Ir(II) species towards diazo compounds.     

Synthesis and characterization of iron complexes with monoanionic and dianionic N,N',N' '-trialkylguanidinate ligands

Trisubstitued N,N',N' '-tri(alkyl)guanidinate anions have been used in the synthesis of a family of Fe(II) and Fe(III) complexes. Complexes FeCl[((i)PrN)(2)C(HN(i)Pr)](2) (1), [Fe[micro-((i)PrN)(2)C(HN(i)Pr)][((i)PrN)(2)C(HN(i)Pr)]](2) (2), and [Fe[mgr;-(CyN)(2)C(HNCy)][(CyN)(2)C(HNCy)]](2) (3) were prepared from the reaction of the appropriate lithium tri(alkyl)guanidinate and FeCl(3) or FeBr(2). The complex [FeBr[micro-(CyN)(2)C(HNCy)]](2) (4), an apparent intermediate in the formation of 3, has also been isolated and characterized. Complexes 1 and 2 react with alkyllithium reagents to yield products that depend on the identity of the reagent as well as the reaction stoichiometry. Reaction of 2 with MeLi (1:2 ratio) produces Li(2)[Fe[micro-((i)PrN)(2)C=N(i)Pr][((i)PrN)(2)C(HN(i)Pr)]](2) (5). Reaction of 1 with an equimolar amount of LiCH(2)SiMe(3) results in reduction to Fe(II) and generation of 2 while reaction with 4 LiCH(2)SiMe(3) proceeds by a combination of reduction, substitution, and deprotonation of guandinate to yield Li(4)(THF)(2)[Fe[((i)PrN)(2)CN(i)Pr](CH(2)SiMe(3))(2)](2) (7). Both complexes 5 and 7 posssess dianionic guanidinate ligands. The reaction of 2 with 1 equiv of LiCH(2)SiMe(3) generated Fe(2)[micro-((i)PrNCN(i)Pr)(2)(N(i)Pr)][((i)PrN)(2)C(HN(i)Pr)](2) (6). Compound 6 has a dianionic biguanidinate ligand derived from the coupling of the two bridging guanidinate ligands of 2.