New 7-substituted quinolone antibacterial agents. II. The synthesis of 1-ethyl-1,4-dihydro-4-oxo-7-(pyrazolyl,isoxazolyl, and pyrimidinyl)-1,8-naphthyridine and quinolone-3-carboxylic acids

Synthetic methods for the construction of certain aromatic heterocyclic side chains for the quinolone anti-bacterials have been provided. In particular a series of 7-(pyrazol-3 or 4-yl, 4- or 5-isoxazolyl and 4- or 5-pyrimidinyl)-1-ethyl-1,4-dihydro-4-oxo-1,8-naphthyridine and quinoline-3-carboxylic acids have been prepared. All of the heterocycles were prepared from masked 1,3-dicarbonyl derivatives of nalidixic acid ( 9,17 ) or 7-acetyl-1-ethyl-1,4-dihydro-4-oxo-3-quinoline carboxylic acids ( 8 ). These masked 1,3-dicarbonyl derivatives were prepared by the use of t-butoxy-bis-dimethylaminomethane on the activated methyls of 9,19 and 8 . The pyrimidinyl analogs, substituted with a 2-amino or a 2-aminomethyl moiety, were the only derivatives with substantial antibacterial activity.     

N-(α-Amidoalkyl)benzotriazole-mediated synthesis of β′-amido β-diketones: a general synthetic protocol for N-[β-(3,5-di and 1,3,5-trisubstituted pyrazol-4-yl)alkyl] amides

Various β′-amido-β-diketones were first synthesized with N-(α-amidoalkyl)benzotriazole-mediated amidoalkylation of 1,3-diketones in moderate yields. These intermediates undergo rapid condensation with hydrazines to give the corresponding N-[β-(3,5-di and 1,3,5-trisubstituted pyrazol-4-yl)alkyl]amides.     

Synthetic Applications of 2-(1,3-Dithian-2-yl)indoles. 7. Synthesis of Aspidospermidine

A new method of synthesizing the alkaloid aspidospermidine (1), based on building ring E on the pyridocarbazole [ABCD] ring structure, is reported. The preparation of the pyridocarbazole framework of Aspidosperma alkaloids is a new three-step synthetic application of 2-(1,3-dithian-2-yl)indoles. A tandem conjugate addition-alkylation reaction starting from indolyldithiane (4), 3-methylenelactam 6, and EtI yields the adduct 17. Treatment of lactam 17 with DIBALH leads to formation of the naphthyridoindole 18. Compound 18 isomerizes in aqueous AcOH to yield pyridocarbazole 3. Finally, closure of ring E and subsequent reduction of the dithiane ring produces aspidospermidine. Pyridocarbazoles 2 and 10 were prepared as models.     

Facile synthesis of substituted isoquinolines

A facile three-step protocol toward methoxy isoquinolines 7 starting with substituted 2-allylbenzaldehydes 9 was described. The overall synthetic process of skeleton 7 was carried out using the Grignard addition, PCC-oxidation, and one-pot oxidative cleavage of the olefinic group of skeleton 9 with OsO₄–NaIO₄ followed by the condensation of the resulting 1,5-dicarbonyl compounds with NH₄OAc. Skeleton 9 was prepared in high yield via the known Claisen rearrangement of skeleton 8 and O-methylation. Papaverine 2 is also synthesized via the simple three-step synthetic protocol.     

Approaches to the Synthesis of Dicarboxylic Derivatives of Bis(pyrazol-1-yl)alkanes

Carboxylation of bis(pyrazol-1-yl)alkanes by oxalyl chloride was studied. It was found that 4,4′-dicarboxylic derivatives of substrates with electron-donating methyl groups and short linkers (from one to three methylene groups) can be prepared using this method. Longer linkers lead to significantly lower product yields, which is probably due to instability of the intermediate acid chlorides that are initially formed in the reaction with oxalyl chloride. Thus, bis(pyrazol-1-yl)methane gave only monocarboxylic derivative even with a large excess of oxalyl chloride and prolonged reaction duration. An alternative approach involves the reaction of ethyl 4-pyrazolecarboxylates with dibromoalkanes in a superbasic medium (potassium hydroxide–dimethyl sulfoxide) and is suitable for the preparation of bis(4-carboxypyrazol-1-yl)alkanes with both short and long linkers independent of substitution in positions 3 and 5 of pyrazole rings. The obtained dicarboxylic acids are interesting as potential building blocks for metal-organic frameworks.     

A convenient synthesis of olefins via deacylation reaction

A convenient and environmentally-friendly synthetic method of olefins via deacylation reaction is described. The reaction gives olefins by condensation of aldehydes with a variety of 1,3-dicarbonyl compounds in the presence of anhydrous potassium carbonate at room temperature in high yields (70-90%) in one step. The synthetic potential of this strategy can be used as an alternative procedure to the Wittig, Wittig-Horner reactions. The stereochemistry of the resulted olefins was determined by NOE experiment with correct radio frequency and X-ray analysis. The E/Z selectivity of the deacylation reaction depends on the α-substituents of the 1,3-dicarbonyl compounds.     

Aqua mediated indium(III) chloride catalyzed synthesis of fused pyrimidines and pyrazoles

The utilization of water as solvent and indium trichloride as promoter for the three-component combinatorial synthesis of a variety of bioactive pyrimidine and pyrazole derivatives (2–10) from aldehydes, 1,3-dicarbonyl compounds, and electron-rich amino heterocycles like 6-amino-1,3-dimethyl uracil and 3-methyl-1-phenyl-1H-pyrazol-5-amine catalyzed by indium trichloride under reflux has been studied. A new class of pyrimidine derivatives (2) has also been synthesized and the structure was confirmed by single crystal X-ray analysis. The reactions are environmentally benign, reaction product could be isolated easily and the catalyst could be recycled, which makes it an appealing synthetic protocol.     

Sulfamic acid as a green,reusable catalyst for stepwise,tandem & one-pot solvent-free synthesis of pyrazole derivatives

Sulfamic acid (SA) is a bi-functional, cost-effective and reusable green catalyst for the synthesis of 4- (pyrazol-4-yl)methylenepyrazol-5(4H)-one derivatives by one-pot, three-component condensation of pyrazol-4-carbaxaldehydes, β-ketoesters and phenyl hydrazine (Route-I). In addition to this method, another simple condensation of pyrazol-4-carbaxaldehydes with pyrazolone in the presence of SA under the solvent-free condition in good yield is reported. The merits of these protocols are mild conditions, non-aqueous workup, high yields, easy availability of the catalyst, no chromatographic separation and inexpensive solid acid catalyst. Furthermore, SA could be recycled and reused for five times without losing its catalytic activity.     

4,4-Bis(methylthio)azetidin-2-ones as synthons of 1,2- and 1,3-dicarbonyl systems

The importance of β-lactams as synthetic building blocks has been widely recognized in organic synthesis due to possible ring cleavage at any of the four single bonds of the β-lactam ring. We now report reactions involving breaking of the N1-C4 bond in differently substituted at C3 4,4-bis(methylthio)azetidin-2-ones, leading to formation of 1,2- and 1,3-dicarbonyl systems.     

无催化剂、三组分一锅法合成2-氨基-3-氰基-4H-吡喃类化合物

4-H-吡喃类化合物在医药、化工、有机合成等方面应用广泛,因此,发展其有效的合成方法具有重要意义。本文主要研究无催化剂条件下,以水作为反应介质,乙醇作为辅助溶剂,促进芳香醛、丙二腈与多种1,3-二羰基化合物的三组分"一锅法"缩合反应,高产率地合成了3种超过50个2-氨基-3-氰基-4H-吡喃类化合物并进行了系统的结构表征。该方法具有反应条件温和、不使用催化剂、底物适用性广、反应和后处理过程简单以及环境友好等优点。     

Three-component,one-pot synthesis of 3,4-dihydropyrimidin-2-(1<Emphasis Type="Italic">H</Emphasis>)-ones catalyzed by bromodimethylsulfonium bromide

An efficient synthesis of 3,4-dihydropyrimidin-2-(1H)-one derivatives by one-pot three-component condensation reaction between an alkyl or aryl aldehyde, a 1,3-dicarbonyl compound, and urea or thiourea in the presence of catalytic amount of bromodimethylsulfonium bromide has been developed. The condensation product was obtained in excellent yields in refluxing ethanol and easily separated from the reaction mixture and purified.     

Functionally Substituted 3-Heterylpyrazoles: XI. 3-[3-Aryl(heteryl)pyrazol-4-yl]propenoic and Propanoic acids

3-Aryl(heteryl)-4-formylpyrazoles by condensation with malonic acid furnish 3-[3-aryl(heteryl)- pyrazol-4-yl]propenoic acids that in the presence of Raney nickel are reduced by hydrazine hydrate to 3-[3-aryl(heteryl)pyrazol-4-yl]propanoic acids. The successive conversion of both type acids into the corresponding acyl chlorides, esters, and amides was performed.     

A new green approach for the synthesis of 12-aryl-8,9,10,12-tetrahydrobenzo[a]xanthene-11-one derivatives using task specific acidic ionic liquid[NMP]H_2PO_4

12-Aryl-8,9,10,12-tetrahydrobenzo[a]xanthene-11-one derivatives were synthesized by a convenient and environmentally benign procedure involving multicomponent condensation reactions of substituted aromatic aldehydes with 2,7-dihydroxynaphthalene/2-naphthols/2,6-dihydroxynaphthlene and cyclic 1,3-dicarbonyl compounds in task specific acidic ionic liquid[NMP]H_2PO_4 at 80 ℃.This protocol has proved to be efficient in terms of good yields,operational simplicity,easy workup,recyclability of reaction medium/catalyst,and short reaction time.     

Sulfanyl chloride induced heterocyclization of N-(pyrazolyl)styrylacetamides

Heterocyclization of N-(pyrazol-3-yl)styrylacetamides with arenesulfenyl chlorides yields the corresponding tetrahydrofuran-2-iminium perchlorates isolable after chromatography as trans-5-aryl-4-(arylthio)tetrahydrofuran-2-ones and 5-aryl-4-(arylthio)-1-(pyrazol-3-yl)pyrrolidin-2-ones, with the latter predominating. N-(Pyrazol-4-yl)styrylacetamides react under analogous conditions to give 5-aryl-4-(arylthio)-1-(pyrazol-4-yl)pyrrolidin-2-ones, 4-aryl-3-(arylthio)-4-chloro-N-(1-methylpyrazol-4-yl)butanamides, and tetrahydrofuran-2-iminium perchlorates which, when chromatographed, produce 5-aryl-4-(arylthio)dihydrofuran-2(3H)-ones and 4-aryl-3-(arylthio)-4-methoxy-N-(1-methyl-1H-pyrazol-4-yl)butanamides.     

Synthesis and characterization of some chalcones and their cyclohexenone derivatives

A series of chalcones and their derivatives have been synthesized. Chalcones, 1-(1,3-benzodioxol-5-yl)-3-(aryl)-prop-2-en-1-ones were prepared by the aldol condensation of 1-(1,3-benzodioxol-5-yl)ethanones and aryl aldehydes. Based-catalyzed condensation of 1-(1,3-benzodioxol-5-yl)-3-(aryl)prop-2-en-1-ones with ethyl acetoacetate yields corresponding ethyl 4-(1,3-benzodioxol-5-yl)-6-(aryl)-2-oxocyclohex-3-ene-1-carboxylates. Some of the synthesized chalcones were reported in the literature; the newly synthesized compounds were characterized by single crystal X-ray studies, IR, ¹H-NMR and LCMS mass spectral analysis.     

A Photochemical Protocol for the Synthesis of Weinreb and Morpholine Amides from Carboxylic Acids

In recent years, the development of light-mediated methods for synthetic applications has attracted high interest, because such methods constitute alternative approaches for the production of valuable chemical products. We study herein a photochemical protocol for the synthesis of Weinreb amides and morpholine amides from carboxylic acids. Various carboxylic acids were directly coupled to N,O-dimethylhydroxylamine, upon irradiation with either LED 370 nm or sunlight in the presence of 4-dimethylaminopyridine and bromotrichloromethane, providing Weinreb amides in moderate to high yields. Similarly, morpholine amides were obtained in satisfactory to high yields under sunlight or LED 370 nm irradiation. Thus, the versatile building blocks Weinreb amides and morpholine amides may be efficiently synthesized directly from carboxylic acids by light-mediated approaches, without the need of coupling reagents or pre-activation of carboxylic acids.     

Chemical Transformations of Tetracyclo[3.3.1.1<Superscript>3,7</Superscript>.0<Superscript>1,3</Superscript>]decane (1,3-Dehydroadamantane): VI. Reactions of 1,3-Dehydroadamantane with Carboxylic Acid Chlorides

1,3-Dehydroadamantane reacted with saturated carboxylic acid chlorides to give the corresponding 1-acyl-3-chloroadmantanes as the major products. In some cases, minor products of insertion into the C^α–H bond of acyl chloride were formed. The reactions of 1,3-dehydroadamantane with aromatic (heteroaromatic) carboxylic acid chlorides selectively afforded aryl (hetaryl) 3-chloroadamantan-1-yl ketones. The described reactions provide a synthetic route to difficultly accessible alkyl (aryl) ketones containing a 3-chloroadamantan- 1-yl group in one step under mild conditions with high yields.     

Rational synthesis of meso-substituted chlorin building blocks

Chlorins provide the basis for plant photosynthesis, but synthetic model systems have generally employed porphyrins as surrogates due to the unavailability of suitable chlorin building blocks. We have adapted a route pioneered by Battersby to gain access to chlorins that bear two meso substituents, a geminal dimethyl group to lock in the chlorin hydrogenation level, and no flanking meso and beta substituents. The synthesis involves convergent joining of an Eastern half and a Western half. A 3,3-dimethyl-2,3-dihydrodipyrrin (Western half) was synthesized in four steps from pyrrole-2-carboxaldehyde. A bromodipyrromethane carbinol (Eastern half) was prepared by sequential acylation and bromination of a 5-substituted dipyrromethane followed by reduction. Chlorin formation is achieved by a two-flask process of acid-catalyzed condensation followed by metal-mediated oxidative cyclization. The latter reaction has heretofore been performed with copper templates. Investigation of conditions for this multistep process led to copper-free conditions (zinc acetate, AgIO(3), and piperidine in toluene at 80 degrees C for 2 h). The zinc chlorin was obtained in yields of approximately 10% and could be easily demetalated to give the corresponding free base chlorin. The synthetic process is compatible with a range of meso substituents (p-tolyl, mesityl, pentafluorophenyl, 4-[2-(trimethylsilyl)ethynyl]phenyl, 4-iodophenyl). Altogether four free base and four zinc chlorins have been prepared. The chlorins exhibit typical absorption spectra, fluorescence spectra, and fluorescence quantum yields. The ease of synthetic access, presence of appropriate substituents, and characteristic spectral features make these types of chlorins well suited for incorporation in synthetic model systems.     

A convenient approach to heterocyclic building blocks: synthesis of novel ring systems containing a [5,6]Pyrano[2,3-c]pyrazol-4(1H)-one moiety

Starting from commercially available educts, a straightforward synthetic route to new heterocyclic building blocks is exemplified with the one- or two-step synthesis of tri-, tetra-, or pentacyclic ring systems. Representatives of the following novel ring systems are prepared from 3-methyl-1-phenyl-2-pyrazolin-5-one and the corresponding o-halo-arenecarbonyl chloride using calcium hydroxide in refluxing 1,4-dioxane: pyrimidino[4',5':5,6]pyrano[2,3-c]pyrazol-4(1H)-one, thieno[3',2':5,6]pyrano[2,3c]pyrazol- 4-(1H)-one, thieno[3',4':5,6]pyrano[2,3-c]pyrazol-4(1H)-one, thieno[3',2':4',5']thieno[2',3':5,6]-pyrano[2,3-c]pyrazol-4(1H)-one, [1,3]dioxolo[5',6'][1]benzothieno[2',3':5,6]pyrano-[2,3-c]- pyrazol-4(1H)-one, pyridazino[4',3':5,6]pyrano[2,3-c]pyrazol-4(1H)-one and pyrazolo-[4',3':5',6']pyrido[3',4':5,6]pyrano[2,3-c]pyrazol-4(1H)-one. While the latter two ring systems are directly obtained due to a spontaneous intramolecular substitution reaction, in the other reactions uncyclised 4-aroylpyrazol-5-ols are produced, which are cyclised into the target heterocycles in a subsequent synthetic step (i.e. treatment with NaH in DMF). Detailed NMR spectroscopic investigations ((1)H-, (13)C-, (15)N-) with the obtained compounds were undertaken to unambiguously prove the new structures.     

pTSA-catalyzed one-pot synthesis of 12-aryl-8,9,10,12-tetrahydrobenzo[a]xanthen-11-ones in ionic liquid and neat conditions

Multi-component condensation of β-naphthol, aromatic aldehydes, and cyclic 1,3-dicarbonyl compounds catalyzed by p-toluenesulfonic acid has been accomplished for the synthesis of a series of 12-aryl-8,9,10,12-tetrahydrobenzo[a]xanthen-11-ones in ionic liquid([bmim]BF₄) and in solvent-free media. High yields, ease of recovery, and reusable reaction medium (ionic liquid) with consistent activity makes this protocol efficient and environmentally benign.