In Situ Acquisition of Equivalent Circuit Parameters of Crystal Resonance during Copper Deposition and Dissolution in Acidic Solution by Electrochemical Quartz Crystal Impedance System

Thequartzcrystalimpedancetechniqueisapowerfulmethodtocharacterizecrystalresonancesincemultipleinformationaboutcrystalresonanceincludingtheresonantfrequencyandchangesinsomephysicaland/orchemicalpropertiesofthetestsystemcanFigure1.Equivalentelectricalc...     

Balancing the Pauling bond orders in Kekuléan benzenoid hydrocarbons

We consider a cutting of the molecular graph B of a Kekuléan benzenoid molecule into two disconnected subgraphs, S and the other, by deleting from B certain edges. It is required that both subgraphs remain Kekuléan. The edges involved in this cutting are classified as starred and unstarred. A starred edge is incident to a starred carbon site of the subgraph S, whereas an unstarred edge to an unstarred carbon site of S. The following regularity is established: for any above-described cutting of any Kekuléan benzenoid system, the sum of the Pauling bond orders of the starred edges is equal to that for the unstarred edges.     

Reaction of bromine with 4,5-dimethyl-1,4-cyclohexadiene-1,2-dicarboxylic acid: a green chemistry puzzle for organic chemistry students

Abstract

Bromination of an alkene is a typical addition reaction covered in an introductory organic chemistry course and laboratory. In this undergraduate organic chemistry laboratory exercise, students studied the bromination of a 4,5-dimethyl-1,4-cyclohexadiene-1,2-dicarboxylic acid. The reaction has an unexpected outcome as bromination yields the aromatic product, 4,5-dimethylphthalic acid. Green chemistry modification involves application of a “bromide/peroxide reaction” with NaBr/H₂O₂ in an acidic medium as an in situ source of bromine. The experiment was carried out as a two-day exercise and the students integrated molecular modeling, interpretation of mass spectra, knowledge of stability of organic compounds, and knowledge of the reaction mechanisms of addition and elimination to explain the experimental outcome.     

Magnetically separated and N,S co-doped mesoporous carbon microspheres for the removal of mercury ions

Magnetically separated and N, S co-doped mesoporous carbon microspheres (N/S-MCMs/Fe₃O₄) are fabricated by encapsulating SiO₂ nanoparticles within N, S-containing polymer microspheres which were prepared using resorcinol/formaldehyde as the carbon source and cysteine as the nitrogen and sulfur co-precursors, followed by the carbonization process, silica template removal, and the introduction of Fe₃O₄ into the carbon mesopores. N/S-MCMs/Fe₃O₄ exhibits an enhanced Hg²⁺ adsorption capacity of 74.5 mg/g, and the adsorbent can be conveniently and rapidly separated from wastewater using an externalmagnetic field. This study opens up new opportunities to synthesize welldeveloped, carbon-based materials as an adsorbent for potential applications in the removal of mercury ions from wastewater.     

Electrochemical study of single wall carbon nanotubes/graphene/ferritin composite for biofuel cell applications

A single wall carbon nanotubes (SWNTs)/graphene/ferritin/GOx layer on a glassy carbon electrode (GCE) acting as a biofuel cell anode was fabricated using a SWNTs/graphene/ferritin composite as an electron transfer mediator from the enzyme to the electrode. In the presence of glucose, the SWNTs/graphene/ferritin/GOx composite showed a higher current response than SWNTs/graphene/GOx composite and the electrocatalytic oxidation of glucose on the anode increased linearly with increasing concentration of glucose. The highly distributed SWNTs/graphene/ferritin composite acts as a platform for enzyme immobilization resulted in an enhanced electrocatalytic activity towards glucose. The SWNTs/graphene/ferritin composite showed an enhanced electron transfer from enzyme to the electrode; therefore, SWNTs/graphene/ferritin/GOx composite can be used as an anode in biofuel cells.     

Synthesis of peptides employing Fmoc-amino acid chlorides and commercial zinc dust

Coupling of Fmoc-amino acid chlorides mediated by activated commercial zinc dust for the synthesis of peptides is described. The reaction is carried out in an organic medium. The necessity of using an inorganic base like NaHCO₃/Na₂CO₃ or an organic base like DIEA/NMM/TEA/pyridine is circumvented. The coupling is reasonably fast, clean, racemization free and high yielding.     

Coupling of Biomolecular Logic Gates with Electronic Transducers: From Single Enzyme Logic Gates to Sense/Act/Treat Chips

The integration of biomolecular logic principles with electronic transducers allows designing novel digital biosensors with direct electrical output, logically triggered drug‐release, and closed‐loop sense/act/treat systems. This opens new opportunities for advanced personalized medicine in the context of theranostics. In the present work, we will discuss selected examples of recent developments in the field of interfacing enzyme logic gates with electrodes and semiconductor field‐effect devices. Special attention is given to an enzyme OR/Reset logic gate based on a capacitive field‐effect electrolyte‐insulator‐semiconductor sensor modified with a multi‐enzyme membrane. Further examples are a digital adrenaline biosensor based on an AND logic gate with binary YES/NO output and an integrated closed‐loop sense/act/treat system comprising an amperometric glucose sensor, a hydrogel actuator, and an insulin (drug) sensor.     

SnS2/graphene nanocomposite: A high rate anode material for lithium ion battery

In this work,via a facile solvothermal route,we synthesized an anode material for lithium ion batteries(LIBs)—SnS_2 nanoparticle/graphene(SnS_2 NP/GNs) nanocomposite.The nanocomposite consists of SnS_2nanoparticles with an average diameter of 4 nm and graphene nanosheets without restacking.The SnS_2 nanoparticles are firmly anchored on the graphene nanosheets.As an anode material for LIBs,the nanocomposite exhibits good Li storage performance especially high rate performance.At the high current rate of 5,10,and 20 A/g,the nanocomposite delivered high capacities of 525,443,and 378 mAh/g,respectively.The good conductivity of the graphene nanosheets and the small particle size of SnS_2contribute to the electrochemical performance of SnS_2 NP/GNs.     

Novel chiral liquid crystals based on amides and azo compounds derived from 2-amino-1,3,4-thiadiazoles: synthesis and mesomorphic properties

Novel chiral amides (Ia-Ie, II) and azo compounds (III, IV) with a 1,3,4-thiadiazole unit in the rigid core were synthesized and their liquid crystalline properties investigated by polarizing optical microscopy and differential scanning calorimetry. The amides Ia-Ie contain a chiral alkoxy chain derived from (R)-2-octanol and an achiral chain varying from 6 to 10 carbon atoms at the end of the rigid core. In amide II one of the terminal group is a chiral alkoxy chain derived from (S)-isoleucine and the other terminal substituent is an achiral n-decyloxy chain. Azo compounds III and IV contain an achiral n-decyloxy chain and a chiral alkoxy chain derived from (R)-2-octanol and (S)-isoleucine, respectively, at the end of the rigid core. The first homologue in the series of amides (Ia) exhibits enantiotropic smectic X (SmX)-chiral nematic (N*) dimorphism and the homologues Ib-Ie display enantiotropic SmX-chiral smectic C (SmC*)-N* mesomorphism. Amide II displays an enantiotropic smectic A phase. The azo compounds III and IV do not show smectic order and only an enantiotropic N* phase was observed. Thus, the mesomorphic behaviour depends on the nature of the central linkage and on the nature of the chiral alkoxy chain.     

根据角度节面及其对称性分布导出原子轨道形状

The shape of an atomic orbital not only depends on the azimuthal quantum number l, but also associates with the magnetic quantum number m. We discussed about how to derive the shape of an atomic orbital from the numbers and shapes of the angular nodal planes, and the symmetries of distribution of all angular nodal planes when l and|m|are known. According to the|m|, the compatibility of the symmetry of an atomic orbitals have also been also discussed.     

Dnd点群的几点释疑

Point group in crystallography is one of the important subjects in structural chemistry.Some topics are very difficult to understand.To name a few, why does point group of D_2d belong to tetragonal? Why are D_4d and D_6d not included in 32 kinds of crystallographic point groups? The two questions are easy to answer if we understand the following topic:for the D_nd point group, when n is odd, it contains an I_n symmetry axis; when n is even, it contains an I_2n symmetry axis.In this work, graphic method and matrix method are adopted to clarify why the D_nd point group includes an S_2n axis, and thus give explanations that D_2d belongs to tetragonal as well as D_4d and D_6d are not included in 32 kinds of crystallographic point groups.     

Mutant-Selective Allosteric EGFR Degraders are Effective Against a Broad Range of Drug-Resistant Mutations

Targeting epidermal growth factor receptor (EGFR) through an allosteric mechanism provides a potential therapeutic strategy to overcome drug-resistant EGFR mutations that emerge within the ATP binding site. Here, we develop an allosteric EGFR degrader, DDC-01-163, which can selectively inhibit the proliferation of L858R/T790M (L/T) mutant Ba/F3 cells while leaving wildtype EGFR Ba/F3 cells unaffected. DDC-01-163 is also effective against osimertinib-resistant cells with L/T/C797S and L/T/L718Q EGFR mutations. When combined with an ATP-site EGFR inhibitor, osimertinib, the anti-proliferative activity of DDC-01-163 against L858R/T790M EGFR-Ba/F3 cells is enhanced. Collectively, DDC-01-163 is a promising allosteric EGFR degrader with selective activity against various clinically relevant EGFR mutants as a single agent and when combined with an ATP-site inhibitor. Our data suggests that targeted protein degradation is a promising drug development approach for mutant EGFR.     

Ab initio and DFT calculations for the structure and vibrational spectra of cyclopentene and its isotopomers

Ab initio calculations using the MP2/cc-pVTZ basis set do an excellent job of predicting the inversion barrier (247 vs. 232 cm⁻¹) and dihedral angle (26°) of cyclopentene. DFT calculations also do an excellent job of predicting the vibrational frequencies of the d₀, d₁, d₄, and d₈ isotopomers. They have also allowed the reassignments of several of the vibrational frequencies.     

原位合成氧化镍硼/石墨炔杂化材料用于提高光/电催化产氢性能

当今世界面临严峻的能源紧缺和环境污染问题,发展高效无污染的清洁能源替代传统化石能源成为近几十年科研工作者的研究热点.其中,氢能由于具有高燃烧值和产物无污染等优点成为理想的替代能源.光/电催化水分解产生氢气是最有效的制氢方法之一.目前,高活性的产氢催化剂仍以贵金属为主,但贵金属价格高昂和稀缺性等限制了其大规模应用,因此,...     

A Stepwise Annulation for the Transformation of Cyclic Ketones to Fused 6 and 7‐Membered Cyclic Enimines and Enones

The efficient construction of functionalized polycyclic structures is an important objective in organic synthesis. Herein, we disclose a three‐step “[2 + n]” annulation method for the transformation of cyclic ketones to fused enimines and enones. The method relies on the Suzuki coupling reaction and the amide reductive alkenylation reaction. A series of fused bicyclic (6/6, 6/7, 8/7) and tricyclic (6/6/6; 6/6/7, 6/5/7) ring systems bearing an α,β‐enimine or an α,β‐enone functionality have been synthetized in good overall yields.     

Forty years of Umpolung in organometallic chemistry: from carbanionic nucleophiles to metallic electrophiles

The evolution of mechanistic insight into the nature of organometallic reactions over the last forty years is recounted from the personal perspective of a chemist trained in the empirical tradition of organometallic chemistry. Starting from the viewpoint prevailing in the 1950s of organometallics as potential carbanionic nucleophiles, this investigator has become persuaded by his researches with Group 13 organometallics of the merits of treating these reagents as organometallic electrophiles. The profound effects that a tricoordinate boron center can exert on the structure and reactivity of boracyclopolyenes is a telling illustration of such boron electrophilicity operating in an intramolecular fashion. The elucidation of the mechanisms of both the carbalumination and the hydroalumination of olefins and acetylenes has adduced cogent evidence for the rate-determining step being the electrophilic attack of tricoordinate aluminum on the carbon-carbon π-electron cloud of the substrate. Finally, in an investigation of the molecular basis for Ziegler-Natta catalysis, the Breslow-Natta soluble catalyst for the polymerization of ethylene, Cp₂TiCl₂-R_nAlCl_3−n, was examined in detail and compelling evidence has been adduced that the active catalyst site is the solvent-separated ion-pair, [Cp₂TiR]⁺ [R_nAlCl_4−n]⁻.. Here again, the polymerization reaction is initiated by an organometallic electrophile, indeed by an even more powerful cationic electrophile. The net effect of these studies has been an Umpolung in the manner with which this chemist and many of his colleagues view organometallic reaction mechanisms.     

双功能聚二甲基硅氧烷/铜纳米线复合薄膜的制备与性能

通过环境友好的葡萄糖模板法和改进的湿化学还原法制备了聚二甲基硅氧烷/铜纳米线(PDMS/CuNWs)复合薄膜, 其采用的“类夹心结构”有效解决了铜在空气中易氧化进而导致电导率大幅度下降的问题, 同时获得了具有优异电磁屏蔽和光热转化性能的双功能轻质柔性复合薄膜. CuNWs面密度为1.6 g/cm²的复合薄膜在重复弯折1000次后性能保持率最高可达99.07％; CuNWs面密度为2.4 g/cm²的复合薄膜在X波段下总电磁屏蔽效能达到30.1 dB, 屏蔽效率达到99.9％; 同时, 在2 W/cm²的近红外光照射下, 复合薄膜在仅加热15 s后其表面温度高达211.2 ℃, 具有十分快速的光热响应和转化效率.     

Ir2S3/ZnIn2S4催化下可见光诱导发生的烯烃/炔烃的高效硫氢化反应:Ir2S3的作用

C–S键的构建在化学中具有非常重要的意义.利用硫醇和烯烃/炔烃的硫氢化反应来构建C?S键是一种绿色、可持续和低成本的方法.本文以ZnCl2,InCl3,硫代乙酰胺为前驱体,在微量IrCl3存在条件下,通过一步溶剂热法制备得到了含有不同Ir摩尔比(0.5 mol％,1 mol％和2 mol％)的Ir2S3/ZnIn2S4...     

Toward the Total Synthesis of Bryostatin 11: Stereoselective Construction of the C13-Exocyclic Enoate in the C1–C16 Fragment

We have utilized a spiroketal template in an approach to the C1–C16 fragment of bryostatin. The stereoselective construction of an exocyclic enoate at C13 and insertion of a vinyl group on C15 were accomplished by using Peterson–Yamamoto olefination and copper-catalyzed addition of vinyl magnesium bromide, respectively.      

多价MnOx/C电催化剂用于高效氮还原反应

氨在人类的生产生活中起着重要的作用,但目前工业上合成氨广泛采用的Haber-Bosch法耗能大,且污染严重。 而N₂电还原反应(ENRR)被认为是一种有效的替代方法,由于N₂的键能较高,目前仍然缺乏高活性的催化剂。 在这里,通过简单的浸渍法和氧化还原法制备了多价态的MnO_x/C催化剂,该催化剂具有较高的氮还原反应活性(氨产率达到7.8 μg_NH3/(h·mg_cat),法拉第效率高达9.2%) 。进一步研究表明,多价态MnO_x/C催化剂具有高氮还原反应活性的主要原因是不同价态的Mn离子(Mn²⁺、Mn³⁺、Mn⁴⁺)之间存在协同效应。