Electrochemical investigations on stability and protonation behavior of pyridine-terminated aromatic self-assembled monolayers

Based on electrochemical methods such as cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS), Au(111) electrodes modified by self-assembled monolayers (SAMs) of a homologous series of pyridine-terminated thiols with aromatic backbones have been investigated. An important correlation between the chain structure and film integrity in electrolytic media was found. Monolayers with odd numbers of methylene spacers in the molecular chain showed superior barrier properties compared to even numbered counterparts. A positive influence of an increase in the number of attached phenyl rings on the integrity of SAMs was observed. Furthermore, cathodic desorption of the investigated SAMs is characterized by multiwave desorption peaks and extraordinarily large cathodic charges indicating an unusual desorption process. Moreover, protonation behavior of the SAMs has been investigated by X-ray photoelectron spectroscopy (XPS) and electrochemical methods. Protonation has been found to be reversible and surface pK(a) values have been determined to be around 5 for all investigated monolayers.     

Elucidation of the deposition processes and spatial structures of alkanethiol and arylthiol molecules adsorbed on Pt111 electrodes with in situ scanning tunneling microscopy

In situ scanning tunneling microscopy (STM) was used to examine the spatial structures of n-alkane thiols (1-hexanethiol, 1-nonanethiol, and 1-octahexanethiol) and arylthiols (benzenethiol and 4-hydroxybenzenethiol) adsorbed on well-ordered Pt111 electrodes in 0.1 M HClO4. The electrochemical potential and molecular flux were found to be the dominant factors in determining the growth mechanisms, final coverages, and spatial structures of these organic adlayers. Depending on the concentrations of the thiols, deposition of self-assembled monolayers (SAMs) followed either the nucleation-and-growth mechanism or the random fill-in mechanism. Low and high thiol concentrations respectively produced two ordered structures, (2 x 2) and (square root of 3 x square root of 3)R30 degrees , between 0.05 and 0.3 V. On average, an ordered domain spanned 500 A when the SAMs were made at 0.15 V, but this dimension shrank substantially once the potential was raised above 0.3 V. This potential-induced order-to-disorder phase transition resulted from a continuous deposition of thiols, preferentially at domain boundaries of (square root of 3 x square root of 3 x )R30 degrees arrays. All molecular adlayers were completely disordered by 0.6 V, and this restructuring event was irreversible with potential modulation. Since all thiols were arranged in a manner similar to that adopted by sulfur adatoms (Sung et al. J. Am. Chem. Soc. 1997, 119, 194), it is likely that they were adsorbed mainly through their sulfur headgroups in a tilted configuration, irrespective of the coverage. Both the sulfur and phenyl groups of benzenethiol admolecules gave rise to features with different corrugation heights in the molecular-resolution STM images. All thiols were adsorbed strongly enough that they remained intact at a potential as negative as -1.0 V in 0.1 M KOH.     

Inkjet deposition of alkanethiolate monolayers and DNA oligonucleotides on gold: evaluation of spot uniformity by wet etching

Inkjet printing allows localized, contact-free deposition of liquids onto arbitrary substrates. In this article we demonstrate the fast formation of high-quality self-assembled monolayers (SAMs) on gold surfaces. Using a selective etch process, we verify the uniformity of the deposited spots. A direct comparison with microcontact-printed SAMs on Au revealed similar resist quality as inkjet-deposited alkanethiolate SAMs. Likewise, inkjet printing of thiol-functionalized and non-thiolated single-stranded DNA oligomers formed molecular layers protecting Au from etchants. For all compounds used, we achieved etched patterns that were homogeneous and free of defects. These results indicate that an inkjet is a convenient tool for surface functionalization and the direct writing of molecular films and resists.     

Electrochemical release of amine molecules from carbamate-based, electroactive self-assembled monolayers

In this paper, carbamate-based self-assembled monolayers (SAMs) of alkanethiolates on gold were suggested as a versatile platform for release of amine-bearing molecules in response to the electrical signal. The designed SAMs underwent the electrochemical oxidation on the gold surface with simultaneous release of the amine molecules. The synthesis of the thiol compounds was achieved by coupling isocyanate-containing compounds with hydroquinone. The electroactive thiol was mixed with 11-mercaptoundecanol [HS(CH(2))(11)OH] to form a mixed monolayer, and cyclic votammetry was used for the characterization of the release behaviors. The mixed SAMs showed a first oxidation peak at +540 mV (versus Ag/AgCl reference electrode), indicating the irreversible conversion from carbamate to hydroquinone groups with simultaneous release of the amine molecules. The analysis of ToF-SIMS further indicated that the electrochemical reaction on the gold surface successfully released amine molecules.     

Studies of Self-assembled Monolayers Formed by Imidazoline on Iron Surface by SEM and SECM

Self-assembled monolayers (SAMs) formed from organic substances can improve the inhibition of metal corrosion, because uniform and closely packed films formed on the metal surface providing an insulating layer1, 2. SAMs on the iron surface are studied so far because iron is one active metal which is easily corroded in the air. In this paper, SECM and SEM have successfully been applied in the study of SAMs inhibition corrosion for iron. SECM has been used to study the electrochemically a…     

Reversible covalent patterning of self-assembled monolayers on gold and silicon oxide surfaces

This paper describes the generation of reversible patterns of self-assembled monolayers (SAMs) on gold and silicon oxide surfaces via the formation of reversible covalent bonds. The reactions of (patterned) SAMs of 11-amino-1-undecanethiol (11-AUT) with propanal, pentanal, decanal, or terephthaldialdehyde result in dense imine monolayers. The regeneration of these imine monolayers to the 11-AUT monolayer is obtained by hydrolysis at pH 3. The (patterned) monolayers were characterized by Fourier transform infrared reflection absorption spectroscopy, X-ray photoelectron spectroscopy, contact angle and electrochemical measurements, and atomic force microscopy. Imines can also be formed by microcontact printing of amines on terephthaldialdehyde-terminated substrates. Lucifer Yellow ethylenediamine was employed as a fluorescent amine-containing marker to visualize the reversible covalent patterning on a terephthaldialdehyde-terminated glass surface by confocal microscopy. These experiments demonstrate that with reversible covalent chemistry it is possible to print and erase chemical patterns on surfaces repeatedly.     

Self-assembled monolayers of alkanethiols on gold prepared in a hexagonal lyotropic liquid crystalline phase of Triton X-100/water system

In this paper, we have reported a new method of preparing self-assembled monolayers (SAMs) of decanethiol and hexadecanethiol on gold surface by using a lyotropic liquid crystalline phase as an adsorbing medium. The stability and blocking ability of these SAMs were characterized using grazing angle Fourier transform infrared (FTIR) spectroscopy and electrochemical techniques such as cyclic voltammetry and electrochemical impedance spectroscopy. The lyotropic liquid crystalline medium possesses a hexagonal structure consisting of a nonionic surfactant Triton X-100, water, and the corresponding thiol, which provides a highly hydrophobic environment to solubilize the alkanethiols and later to facilitate their delivery to the gold surface. We find that the SAMs formed from the hexagonal liquid crystalline phase are highly compact and have excellent electrochemical blocking ability towards the redox probes compared to conventional SAMs prepared from commonly used organic solvents such as ethanol. From the impedance studies, we have determined the capacitance of the monolayer-coated electrodes and the surface coverage of the SAM, which has been found to be >99.98% on gold surface. We have also estimated the extent of ionic permeability through the film and measured the rate constants for the redox reactions on the SAM-modified electrodes. Our results show that the rate constants of [Fe(CN)6](3-/4-) and [Ru(NH3)6](2+/3+) redox couples are very much lower in the case of monolayers prepared in liquid crystalline phase compared to the SAM formed in 1 mM thiol in ethanol solution, suggesting a better blocking ability of the SAMs in the former case. From the grazing angle FTIR spectroscopic studies and capacitance measurements, we have ruled out any coadsorption of surfactant molecules on the Au surface. These results suggest that SAMs of very low defect density and extremely low ionic permeability can be obtained when a hexagonal lyotropic liquid crystalline phase is used as an adsorbing medium.     

Inkjet printed Prussian blue films for hydrogen peroxide detection

An inkjet printing method is described to fabricate hydrogen peroxide (H(2)O(2)) sensors. Insoluble Prussian blue (PB) nanoparticles were dispersed in aqueous solvent, and were printed on screen printed carbon electrodes with a piezoelectric inkjet printer for H(2)O(2) detection. The electrochemical behavior of the printed sensors was studied by using cyclic voltammetry and chronoamperometry. The printed sensors showed great electrocatalytic activity toward H(2)O(2) and can be used for amperometric detection of H(2)O(2). The calibration curves for H(2)O(2) determination showed a linear range from 0.02 to 0.7 mM with a sensitivity of 164.82 μA M(-1) cm(-2) for the printed PB film. The results showed the feasibility of applying inkjet printing technology on surface modification; the results also provide an alternative way for manufacturing electrochemical sensors.     

Electrochemical stability of self-assembled alkylphosphate monolayers on conducting metal oxides

Alkylphosphate self-assembled monolayers (SAMs) were prepared on Nb-doped SrTiO(3) (Nb-STO) conducting metal oxide substrates. Unlike thiols on gold, the alkylphosphate SAMs on Nb-STO exhibited an electrochemical stability over a wide voltage range from -2 to 2 V. Cyclic voltammetry showed that the SAM modification inhibited the electrochemical activity of the underlying conducting substrate with an efficiency dependent on the chain length. Impedance spectroscopy showed that SAM-modified Nb-STO substrates have a significantly higher resistance than bare substrates.     

In situ STM evidence for the adsorption geometry of three N-heteroaromatic thiols on Au(111)

The electrochemical behavior of three heteroaromatic thiols (MBs) (2-mercaptobenzimidazole (MBI), 2-mercaptobenzothiazole (MBT), and 2-mercaptobenzoxazole (MBO)) on a Au(111) surface has been investigated by electrochemical scanning tunneling microscopy (ECSTM) and cyclic voltammetry (CV) in 0.1 M HClO(4) solution. All three thiols form oriented molecular cluster lines along the reconstruction line direction at 0.55 V. With the electrode potential shifting negatively, the molecules undergo a disordered-ordered structural transition. Molecularly resolved STM images show that all three molecules form striped adlayers in the desorption region on the Au(111) surface. The different heteroatoms in the heteroaromatic rings result in different electrochemical behavior of the MB self-assembled monolayers (SAMs). MBI, MBT, and MBO are proposed to interact with the substrate via the S-Au bonds from thiol group and the coordination interaction of N, S, and O with the substrate from the heteroaromatic ring, respectively. These results provide direct evidence of the electrochemical behavior and the adlayer structures of MB SAMs on the Au electrode.     

含酰胺结构的巯基自组装膜的设计与结构表征

提出了一种简便通用的合成巯基化合物的途径，以分子中的羧基CO2H为起始基团，与2-流基乙胺的氨基选择性缩合；合成了一系列具有RC（O）NHCH2CH2SH（R分别为偶氯苯衍生物，双炔衍生物及直链烷基）结构的化合物，并用接触角测量，电化学和掠角反射红外光谱（GIR-IR）等手段对这些化合物在金表面形成的自组装单分子膜进行了表征。发现4-（N－（2‘-巯基已基））酰胺偶氮苯的自组装膜表现出良好的电活性，电化学测定表面浓度为4．21×10(－10)mol·cm(-2)．当R为烷基链时，随烷基链的增长，膜的致密度与有序度增加GIR-IR证明在自组装腹中CH3（CH2）6C（O）NHCH2CH2SH的C＝O和N－H键与Au表面平行，分子轴线与Au表面近似垂直．     

Electroactive self-assembled monolayers of unique geometric structures by using rigid norbornylogous bridges

Herein, we describe the synthesis of straight (S) and L-shaped (L) norbornylogous bridges (NBs) with an anthraquinone moiety at the distal end as the redox-active head group and two thiol feet at the proximal end, by which the molecules assemble on gold surfaces. The NB molecules were shown to form self-assembled monolayers (SAMs) with a well-behaved surface redox process. The SAMs were characterized by using in situ IR spectroscopy, cyclic voltammetry, scanning tunnelling microscopy and electrochemical impedance spectroscopy. The surface selection rules associated with the IR band intensities allowed the estimation of the position of the anthraquinone moiety with respect to the surface and the tilt of the bridge with respect to the surface normal, both in pure and diluted monolayers. It is shown that the S- and L-NBs hold the plane of the anthraquinone moiety close to the surface normal or the surface tangent, respectively. Neither NB molecule changes its orientation if spaced by diluents on the surface. The difference in the structure of the S- and L-NB SAMs provides a suitable framework for the investigation of factors that govern electron transfer of anthraquinone moieties across self-assembled monolayers with limited structural ambiguity, as compared with the commonly used structurally flexible alkanethiol monolayers.     

Characterization of self-assembled monolayers of porphyrins bearing multiple-thiol and photoelectric response

Self-assembled monolayers(SAMs) of thiol-derivatized porphyrin molecules on Au substrate have attracted extensively interest for use in sensing,optoelectronic devices and molecular electronics.In this paper,tetra-[p-(3-mercaptopropyloxy)-phenyl]porphyrin was synthesized and self-assembled with thiol on Au substrate for porphyrin SAMs(PPS 4).The electrochemical results demonstrated that PPS 4 could form excellent SAMs on gold surface.Self-assembled nanojunctions of PPS 4 were fabricated by using gold nanogap electrodes(gap width:ca.100 nm).With the light on/off,the nanojunctions showed current high/low as nanometer scaled photo switch.     

Characterization of self-assembled monolayers of porphyrins bearing multiple thiol-derivatized rigid-rod tethers

A series of multithiol-functionalized zinc porphyrins has been prepared and characterized as self-assembled monolayers (SAMs) on Au. The molecules, designated ZnPS(n) (n = 1-4), contain from one to four [(S-acetylthio)methyl]phenylethynylphenyl groups appended to the meso-position of the porphyrin; the other meso-substituents are phenyl groups. For the dithiol-functionalized molecules, both the cis- and the trans-appended structures were examined. The ZnPS(n) SAMs were investigated using X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, and various electrochemical methods. The studies reveal the following characteristics of the ZnPS(n) SAMs. (1) The ZnPS(n) molecules bind to the Au surface via a single thiol regardless of the number of thiol appendages that are available per molecular unit. (2) The porphyrins in the ZnPS(3) and ZnPS(4) SAMs bind to the surface in a more upright orientation than the porphyrins in the ZnPS(1), cis-ZnPS(2), and trans-ZnPS(2) SAMs. The porphyrins in the ZnPS(3) and ZnPS(4) SAMs are also more densely packed than those in the cis-ZnPS(2) and trans-ZnPS(2) SAMs. The packing density of the ZnPS(3) and ZnPS(4) SAMs is similar to that of the ZnPS(1) SAMs, despite the larger size of the molecules in the former SAMs. (3) The thermodynamics and kinetics of electron transfer are generally similar for all of the ZnPS(n) SAMs. The general similarities in the electron-transfer characteristics for all of the SAMs are attributed to the similar binding motif.     

Near-edge X-ray absorption fine structure spectroscopy of diamondoid thiol monolayers on gold

Diamondoids, hydrocarbon molecules with cubic-diamond-cage structures, have unique properties with potential value for nanotechnology. The availability and ability to selectively functionalize this special class of nanodiamond materials opens new possibilities for surface modification, for high-efficiency field emitters in molecular electronics, as seed crystals for diamond growth, or as robust mechanical coatings. The properties of self-assembled monolayers (SAMs) of diamondoids are thus of fundamental interest for a variety of emerging applications. This paper presents the effects of thiol substitution position and polymantane order on diamondoid SAMs on gold using near-edge X-ray absorption fine structure spectroscopy (NEXAFS) and X-ray photoelectron spectroscopy (XPS). A framework to determine both molecular tilt and twist through NEXAFS is presented and reveals highly ordered diamondoid SAMs, with the molecular orientation controlled by the thiol location. C 1s and S 2p binding energies are lower in adamantane thiol than alkane thiols on gold by 0.67 +/- 0.05 and 0.16 +/- 0.04 eV, respectively. These binding energies vary with diamondoid monolayer structure and thiol substitution position, consistent with different degrees of steric strain and electronic interaction with the substrate. This work demonstrates control over the assembly, in particular the orientational and electronic structure, providing a flexible design of surface properties with this exciting new class of diamond nanoparticles.     

自组装膜技术在电分析化学中的研究与应用

本文对自组膜（ＳＡＭｓ）在电分析化学中的研究和应用进行了比较全面的综述。ＳＡＭｓ是单分子膜化学修饰电极发展的最高形式，本文着重阐述了硫醇／金单分子层自组膜在微电极、生物电化学和生物传感器、液相色谱电化学、电催化、光谱电化学等电分析化学研究领域中的应用，并进行了展望。     

Electrochemical characteristics of thin nickel hexacyanoferrate films formed on gold and thiol self-assembled monolayers modified gold electrodes.

Nickel hexacyanoferrate (NiHCF) film was prepared and characterized on gold and thiol self-assembled monolayers (SAMs)-modified gold electrodes. It was found that the film exhibited some different electrochemical characteristics compared with that found on a carbon electrode. In the presence of K+, the film exhibited a redox peak at about 0.5 V. The peak potential shifted linearly with the K+ concentration over the range of about 0.1 mM - 0.1 M with slopes of 54 - 60 mV per log[K+]. However, in solutions containing Na+, Li+ or NH4+ ion the film did not generate well-defined peaks, or even a visible redox peak. Therefore, the film showed a selective potential response to K+. The voltammetric behavior of NiHCF film varied with thiols, the preparation procedure and the solution pH. Under certain conditions, the characteristics of the film could be improved to some extent.     

Tripodal Binding Units for Self-Assembled Monolayers on Gold: A Comparison of Thiol and Thioether Headgroups

Whereas thiols and thioethers are frequently used as binding units of oligodentate precursor molecules to fabricate self-assembled monolayers (SAMs) on coinage metal and semiconductor surfaces, their use for tridentate bonding configuration is still questionable. Against this background, novel tridentate thiol ligands, PhSi(CH(2)SH)(3) (PTT) and p-Ph-C(6)H(4)Si(CH(2)SH)(3) (BPTT), were synthesized and used as tripodal adsorbate molecules for the fabrication of SAMs on Au(111). These SAMs were characterized by X-ray photoelectron spectroscopy (XPS) and near edge X-ray absorption fine structure (NEXAFS) spectroscopy. The PTT and BPTT films were compared with the analogous systems comprised of same tripodal ligands with thioether instead of thiol binding units (anchors). XPS and NEXAFS data suggest that the binding uniformity, packing density, and molecular alignment of the thiol-based ligands in the respective SAMs is superior to their thioether counterparts. In addition, the thiol-based films showed significantly lower levels of contamination. Significantly, the quality of the PTT SAMs on Au(111) was found to be even higher than that of the films formed from the respective monodentate counterpart, benzenethiol. The results obtained allow for making some general conclusions on the specific character of molecular self-assembly in the case of tridentate ligands.     

Strong resistance of oligo(phosphorylcholine) self-assembled monolayers to protein adsorption

In this work, we demonstrate the strong resistance of oligo(phosphorylcholine) (OPC) self-assembled monolayers (SAMs) to protein adsorption and cell adhesion. OPC SAMs were characterized using X-ray photoelectron spectroscopy (XPS), and protein adsorption was measured using a surface plasmon resonance (SPR) sensor. Results are compared with those of phosphorylcholine (PC) SAMs. Despite the existence of negative charge on OPC SAMs and the simple synthesis procedure of OPC thiols, OPC SAMs resist protein adsorption as effectively as or better than PC SAMs formed from highly purified PC thiols. The ease of their preparation and the effectiveness of their function make OPC SAMs an attractive alternative for creating nonfouling surfaces.     

硫醇自组装膜对金电极上吡咯电化学聚合的影响

用电化学聚合法在多种烷基硫醇自组装膜修饰金电极上制备了聚吡咯.通过计时安培法、循环伏安法和交流阻抗技术研究了自组装膜的烷基链长和端基功能团对吡咯聚合过程和性质的影响.当自组装膜较完美时,聚吡咯沉积在自组装膜表面;而当自组装膜有一定缺陷时,吡咯在针孔处成核,然后继续生长并完全覆盖在自组装膜表面.研究结果表明,烷基硫醇的链越短,吡咯聚合越容易;疏水的烷基硫醇自组装膜有利于聚吡咯在电极表面的生长.