Trends in radiometrics and mass spectrometry technologies: synergy in environmental analyses

The dominant development in the radiometrics techniques for the analysis of short and medium-lived radionuclides in the environment was the utilisation of large volume Ge detectors in underground laboratories with additional anti-cosmic shielding. In the mass spectrometry sector, applications of Accelerator Mass Spectrometry (AMS) and Inductively Coupled Plasma Mass Spectrometry (ICPMS) for the analysis of long-lived radionuclides in the environment are the most important recent achievements. These developments in both sectors did not only considerably decrease the detection limits for several radionuclides (up to several orders of magnitude), but they also enable to decrease sample volumes so that sampling, e.g. of the water column, can be much easier and more effective. Applications of radiometrics and mass spectrometry techniques in isotope oceanography, specifically on the distribution of ³H, ¹⁴C, ⁹⁰Sr, ¹²⁹I, ¹³⁷Cs, ²³⁹Pu and ²⁴⁰Pu in the water column of the North Pacific and South Indian Oceans are presented and discussed.     

New ultra-sensitive radioanalytical technologies for new science

Recent developments in radiometric and mass spectrometry technologies have been associated in the radiometric sector mainly with underground operations of large volume Ge detectors, while the mass-spectrometry sector, represented mainly by accelerator mass spectrometry and inductively coupled plasma mass spectrometry has become the most sensitive technique for ultra-low-level analyses of long-lived radionuclides. These new developments have had great impact on investigations of rare nuclear processes and applications of radionuclides in environmental, life and space sciences. New scientific investigations have been carried out therefore which have not been possible before either because of lack of sensitivity or required large sample size.     

Laser ionization mass spectrometry in inorganic trace analysis

Summary Among the different spectrometric techniques for trace analysis Laser Ionization Mass Spectrometry (LIMS) is well established as a trace analytical method. With the LIMS technique the sample material is evaporated and ionized by means of a focused pulsed laser in a laser microplasma, which is formed in the spot area of the irradiated sample. All chemical elements in the sample materials are evaporated and ionized in the laser plasma. The ions formed are separated according to their mass and energy by a time-of-flight, quadrupole or double focusing mass spectrometer. In this review the characteristics and analytical features, some recent developments and applications of laser ionization mass spectrometry in inorganic trace analysis are described.     

Ultra-sensitive radionuclide spectrometry: Radiometrics and mass spectrometry synergy

Summary Recent developments in radiometrics and mass spectrometry techniques for ultra-sensitive analysis of radionuclides in the marine environment are reviewed. In the radiometrics sector the dominant development has been the utilization of large HPGe detectors in underground laboratories with anti-cosmic or anti-Compton shielding for the analysis of short and medium-lived radionuclides in the environment. In the mass spectrometry sector, applications of inductively coupled plasma mass spectrometry (ICP-MS) and accelerator mass spectrometry (AMS) for the analysis of long-lived radionuclides in the environment are the most important recent achievements. The recent developments do not only considerably decrease the detection limits for several radionuclides (up to several orders of magnitude), but they also enable to decrease sample volumes so that sampling, e.g., of the water column can be much easier and more effective. A comparison of radiometrics and mass spectrometry results for the analysis of radionuclides in the marine environment shows a reasonable agreement - within quoted uncertainties, for wide range of activities and different sample matrices analyzed.     

生物质谱--蛋白质组研究的关键技术

介绍了近几年来国际上重点研究的几类新型生物质谱技术,综述了它们在蛋白质组研究中的最新进展,比较了各自的特点,简要评价了它们在蛋白质组研究中的应用和前景。     

Sample introduction systems for the analysis of liquid microsamples by ICP-AES and ICP-MS

There are many fields in which the available sample volume is the limiting factor for an elemental analysis. Over the last ten years, sample introduction systems used in plasma spectrometry (i.e., Inductively Coupled Plasma Atomic Emission Spectrometry, ICP-AES, and Mass Spectrometry, ICP-MS) have evolved in order to expand the field of applicability of these techniques to the analysis of micro- and nanosamples. A full understanding of the basic processes occurring throughout the sample introduction system is absolutely necessary to improve analytical performance. The first part of the present review deals with fundamental studies concerning the different phenomena taking place from aerosol production to analyte excitation/ionization when the liquid consumption rate does not exceed 100 μl/min. Existing sample introduction systems are currently far from the ideal and a significant effort has been made to develop new and efficient devices. Different approaches for continuously introducing small sample volumes (i.e., microsamples) have been reviewed and compared in the present work. Finally, applications as well as basic guidelines to select the best sample introduction system according to the sample particularities are given at the end of this review.     

Recent developments in radiometric and mass spectrometry methods for marine radioactivity measurements

The most important recent developments in radiometric techniques have been the operation of high efficiency HPGe detectors with anticosmic or antiCompton shielding often placed underground, ship-board measurements of ²³⁴Th using gamma-spectrometry or beta-counting and underwater gamma-spectrometry. In mass spectrometry techniques, the availability of high resolution ICP-MS and applications of AMS for the analysis of long-lived radionuclides have opened doors for investigations which previously required too large samples, or were not possible because of lack of sensitivity. These developments are illustrated by several examples of marine radioactivity studies, which include contaminated sites (e.g., Fangataufa Atoll) and open ocean studies (e.g., the Atlantic Ocean) as well as analyses of IAEA reference materials. A comparison of Pu results obtained by alpha-spectrometry, ICP-MS and AMS has shown that a reasonably good agreement has been obtained between all three methods.     

Nanomaterials in mass spectrometry ionization and prospects for biological application

The rapid development of nanotechnology has revolutionized scientific developments in recent decades. Mass spectrometry (MS) measurements are no exception and have benefited greatly from integration of nanomaterials in every step of analysis. This brief review summarizes recent developments in the field with the focus on the use of nanomaterials as alternative media to facilitate analyte ionization in laser-desorption ionization–mass spectrometry (LDI–MS) and secondary ion mass spectrometry (SIMS). The biological applications of both techniques are also detailed. The use of nanomaterials in other aspects of MS analysis, for example in sample clean-up and indirect analyte quantification, is briefly discussed.     

Classical analysis including trace-matrix separation versus solid state mass spectrometry: A comparative study for the analysis of high purity Mo,W and Cr

The applicability of GDMS, SIMS, SSMS, NAA and TMS with AAS, ICP-OES and ICP-MS end determination for routine bulk ultratrace analysis of high purity refractory metals was investigated. Due to the heterogeneous distribution of trace elements in the sub-ppm range, sample consumption and analysis time have a tremendous influence on quantification with procedures of low sample consumption. As an example, GDMS, which is commonly used for ultrapure material certification by most of the manufacturers in Europe and the USA, exhibits discrepancies by more than one order of magnitude for repetitive analyses of a series of trace components in the same sample. Furthermore, results of different laboratories using the same instrument are frequently not comparable. Due to easy standardization and large sample consumption TMS procedures combined with FAAS, GFAAS, ICP-AES and ICP-MS as methods of end determination exhibit better precision and accuracy than GDMS and SIMS. Detection limits are comparably low or even better in case of ICP-MS end determination. TMS procedures are less expensive and less time consuming than highly sophisticated analytical techniques like GDMS, SIMS or NAA. Additionally, they can be easily applied by experienced personnel in a well equipped industrial analytical laboratory.List of Acronyms Used AAS Atomic Absorption Spectrometry - FAAS Flame Atomic Absorption Spectrometry - GDMB Gesellschaft Deutscher Metallhütten- und Bergleute - GDMS Glow Discharge Mass Spectrometry - GFAAS Graphite Furnace Atomic Absorption Spectrometry - ICP-AES Inductively Coupled Plasma Atomic Emission Spectrometry - ICP-MS Inductively Coupled Plasma Mass Spectrometry - IDMS Isotope Dilution Mass Spectrometry - NAA Neutron Activation Analysis - SIMS Secondary Ion Mass Spectrometry - SSMS Spark Source Mass Spectrometry - TMS Trace-Matrix Separation - VLSI Very Large Scale Integration - XRFS X-Ray fluorescence Spectroscopy Dedicated to Professor Günther Tölg on the occasion of his 60th birthday     

Trends in surface and interface analysis

Summary The rapid progress in high technology constantly poses new challenges for Analytical Chemistry and prompts the development of new techniques and procedures. The influence is particularly strong in surface and interface analysis, which is developing at a rapid pace. This paper discusses some of the frontier areas like high-resolution depth-distribution analysis of trace elements, quantitative depth distribution analysis of ultra thin-layer systems, quantitative trace element analysis in monolayers, 3-dimensional stereometric analysis, molecular analysis, in-situ atomic resolution analysis of surfaces (chemical nanoscopy). Methodological approaches are discussed as well as results obtained mainly with solid state mass spectrometry and atomic force microscopy.Abbreviations and acronyms AES Auger Electron Spectrometry - AEM Analytical Electron Microscopy - AFM Atomic Force Microscopy - BSE Back Scattered Electrons - EPMA Electron Probe Micro Analysis - LRI-SNMS Laser Resonance Ionization Sputtered Neutrals Mass Spectrometry - SE Secondary Electrons - SEM Scanning Electron Microscopy - SIMS Secondary Ion Mass Spectrometry - STM Scanning Tunneling Microscopy - TEM Transmission Electron Microscopy - TOF-MS Time-of-Flight Mass Spectrometer - TXRF Total Reflection X-Ray Spectrometry - XPS X-Ray Photoelectron Spectroscopy Dedicated to Professor Dr. Wilhelm Fresenius on the occasion of his 80th birthday     

Developments in radioanalytics: from Geiger counters to single atom counting

Progress in radioanalytical science, mainly in radiometrics and mass spectrometry technologies for ultra-sensitive analyses of radionuclides applied in natural sciences is shortly reviewed. While in the radiometrics sector the greatest developments have been made in underground Ge gamma-spectrometry, in the mass spectrometry sector the accelerator mass spectrometry had dominant position reaching the status of single atom counting and compound specific analysis for some long-lived radionuclides.     

Recent developments in the high-resolution gas chromatography of polychlorinated biphenyls.

The capillary gas chromatography of polychlorinated biphenyls (PCBs) is reviewed. Focus is on the most recent developments in the separation and detection of PCBs rather than sample preparation methods. Included are a comprehensive look at stationary phases that have been used to separate PCBs and the relatively new work on chiral separations of PCBs. Mass spectrometry and atomic emission are presented as selective detection techniques. Suggestions for additional research are proposed where appropriate.     

Preliminary investigation into suitable techniques to measure the chemical yield of radionuclides in thermal neutron irradiated samples at AWE (Atomic Weapons Establishment)

Radiochemical separation methods are required for the accurate measurement of radionuclides in complex matrices. To be able to quantify the results after the separation of radionuclides, known amounts of either radioactive tracers or inactive carrier solutions are added at the start of the separation. The added isotopes/elements are then measured at the end of the analysis to calculate the chemical yield for the element or isotope. The chemical yield data is applied to the counting data of the analytes of interest to produce quantified results. Recently, changes have been made to the techniques used to measure chemical yields at the Atomic Weapons Establishment for samples containing fission products. Preliminary development work using wavelength dispersive X-ray fluorescence and inductively coupled plasma–atomic emission spectrometry is discussed, including a comparison of results and evaluation of measurement uncertainty. The use of the techniques to measure fission products in a thermal neutron irradiated uranium sample is described.     

聚苯胺及聚邻甲基苯胺的直接裂解质谱研究

本文用直接裂解质谱和裂解色谱/质谱研究了不同氧化程度聚苯胺(PAn)和聚邻甲基苯胺(POT)的裂解过程及链结构,并用碰撞诱导解离(CID)和联合扫描(B/E)等技术探讨了链的断裂机理。结果表明,聚苯胺及其衍生物在650℃下裂解时产生5个单元的线状齐聚物,PAn及POT中苯二胺和醌亚胺两种结构单元共存。并提出了PAn和POT的自由基过渡态热解机理。     

Analysis of long-lived radionuclides by ICP-MS

Inductively Coupled Plasma Mass Spectrometry ICP-MS has been applied to the characterisation of various nuclear waste forms. Long-lived radionuclides can be determined with similar sensitivities. The installation of an ICP-MS in a glove box and applications and limitations of the methods to nuclear materials, with especial emphasis on isobaric interferences are described.     

金属组学：高通量分析技术进展与展望

金属组学是系统研究一种细胞、组织或完整生物体内全部金属原子的分布、含量、化学种态及其功能的新兴综合学科,它的提出受到人们越来越多的关注。本文综述了金属组学的研究方法,并对各种方法的特点和局限性做了比较说明．ICP-MS与NAA技术可实现多元素同时定量分析,同步辐射微束CT及μRF,EDX,PIXE,SIMS及LA-ICP—MS亦可实现金属组分布研究．金属组学研究目前正处于发展初期,仍有许多困难特别是分析仪器及方法方面的问题有待解决．已有的金属组形态及结构分析工作大多数采用的是较低效率的分析方法,一些正在发展中的关键技术平台,如HTXAS可真正实现高通量的形态或结构分析．此外,生物信息学有望成为金属组学研究的重要工具之一．     

Measurement of lead isotope ratios in wine by ICP-MS and its applications to the determination of lead concentration by isotope dilution

 Methods are described for the accurate and precise determination of lead concentrations and the isotopic composition of lead in wine samples using Inductively Coupled Plasma Mass Spectrometry (ICP-MS). This method needs little sample preparation. A comparison with lead isotope ratios measured by Thermal Ionization Mass Spectrometry (TIMS) in three wine samples reveals a good agreement between the two techniques. The lead concentration in three certified wine samples were measured by isotope dilution (ID) and the results are compared with those obtained by external calibration ICP-MS. Received: 10 June 1996/Revised: 23 September 1996/Accepted: 30 September 1996     

Is it biologically relevant to measure the structures of small peptides in the gas-phase?

Recent developments in sample introduction of biologically relevant molecules have heralded a new era for gas-phase methods of structural determination. One of the biggest challenges is to relate gas-phase structures, often measured in the absence of water and counter ions, with in vivo biologically active structures. An advantage of gas-phase based techniques is that a given peptide can be analysed in a variety of different forms, for example, as a function of charge state, or with additional water molecules. Molecular modelling can provide insight into experimental findings and help elucidate the differences between structural forms. Combining experiment and theory provides a thorough interrogation of candidate conformations. Here two important naturally occurring peptide systems have been examined in detail and results are assessed in terms of their biological significance.The first of these is gonadotropin-releasing hormone (GnRH), a decapeptide which is the central regulator of the reproductive system in vertebrates. We have examined several naturally occurring variants of this peptide using Ion Mobility Mass Spectrometry and Electron Capture Dissociation (ECD) in conjunction with Fourier Transform Ion Cyclotron Mass Spectrometry (FT-ICR-MS). Candidate conformations are modelled using the AMBER force field. Single amino acid changes, for example Gly6 → Ala6, or Ala6 → D-Ala6, have observable effects on the gas phase structure of GnRH. It has been shown that evolutionary primary sequence variations are key to the biological activity of GnRH, and it is thought that this is due to different binding affinities at target receptors. This work provides strong evidence that this activity is structurally based. The second system examined is the relationship between the quaternary structure and activity of two novel β-defensins. FT-ICR mass spectrometry has been employed to characterize di-sulphide bridging and dissociation based experiments utilised to investigate their structural core. Defr1, with five cysteines, exists as a covalently bound disulphide linked dimer; Defr1 Y5C with six cysteines also is observed as a dimer, but non-covalently bound, suggesting that this defensin has a tendency to aggregate. The activity of Defr1 is 10 times higher than that of Defr1 Y5C when tested against the pathogen Pseudomonas aeruginosa. The results from these studies could inform future design of novel GnRH type ligands and anti-microbial agents, and illustrate the power of gas-phase based techniques for solving peptide structures.     

Isotopic abundance measurements on solid nuclear-type samples by glow discharge mass spectrometry

A double-focusing Glow Discharge Mass Spectrometer (GDMS) installed in a glovebox for nuclear sample screening has been employed for isotopic measurements. Isotopic compositions of zirconium, silicon, lithium, boron, uranium and plutonium which are elements of nuclear concern have been determined. Interferences arising from the matrix sample and the discharge gas (Ar) for each of these elements are discussed. The GDMS results are compared with those from Thermal Ionization Mass Spectrometry (TIMS). For boron and lithium at microg/g-ng/g levels, the two methods gave results in good agreement. In samples containing uranium the isotopic composition obtained by GDMS was in agreement with those from TIMS independently of the enrichment. Attempts for the determination of plutonium isotopic composition were also made. In this case, due to the interferences of uranium at mass 238 and americium at mass 241, the GDMS raw data are complementary with those values obtained from physical non-destructive techniques.