共查询到20条相似文献,搜索用时 578 毫秒
1.
中空磁性金属微纳米材料因其具有超大比表面积,生物相容性及优异的电、光、化学和磁特性,在国防民生、催化、能源环境、生物医学等领域广泛应用。结合国内外研究现状,就中空磁性金属微纳米材料的吸波性能、催化特性、电化学特性、生物相容性和磁特性及其应用等方面的研究进展、尚存问题和未来发展趋势展开述评。 相似文献
2.
不同液化条件下生物质残渣的燃烧特性研究 总被引:1,自引:0,他引:1
对锯屑在不同液化条件(溶剂、气氛、温度、催化剂)下所得液化残渣在热天平上进行了燃烧特性研究,通过比较液化残渣燃烧的三个特征温度,着火点ti、燃烧峰温tp和燃烬温度tb,分析了液化条件对残渣燃烧特性的影响。同时通过热重曲线所得数据探讨了液化残渣燃烧过程的动力学,并计算了活化能和频率因子 。结果表明,不同溶剂下所得液化残渣的燃烧特性显著不同,以四氢萘为溶剂所得液化残渣具有较好的燃烧特性;不同气氛下所得残渣的燃烧特性没有明显的不同;350℃下所得液化残渣的燃烧特性要好于300℃下所得液化残渣的燃烧特性;由于催化剂的影响,加入1%Mo后降低了所得液化残渣的燃烧特性;液化残渣的燃烧反应符合两段一级反应动力学。 相似文献
3.
碳量子点(carbon dots,CDs)是一种具有强荧光、荧光波长可调、无光漂白等特性的新型荧光纳米粒子,其制备简单、成本低,而且具有良好的生物相容性和低毒性,在光电器件、生物传感及药物载体等领域展现出广阔的应用前景。其具有的独特激发依赖荧光特性是指随着激发波长的改变,其发射波长将随之改变,所以,通过调节激发波长即可实现CDs的连续全色发射,可为其在多色成像生物领域提供可能性。此外,在长波长激发下,CDs发射波长甚至可以延续到近红外区域,展现出在活体成像领域的应用前景。因此,探索CDs激发依赖荧光特性的机理是非常重要的,这将为实现CDs的激发依赖荧光特性提供理论指导。本文就近年来人们对于CDs激发依赖荧光特性的研究进行了综述,重点概述了CDs激发依赖荧光特性的机理、调控实现CDs激发依赖荧光特性的方法及CDs激发依赖荧光特性的应用。目前,CDs激发依赖荧光特性的机理主要包括:不同表面态的分布、宽的尺寸分布、碳核结构的存在及周围慢的溶剂弛豫;实现CDs激发依赖荧光特性的方法主要有:对表面态的控制、尺寸分布的控制及碳核结构的控制;CDs激发依赖荧光特性的应用主要表现在细胞成像和光电器件。最后,对这一特性研究中尚存在的问题进行了总结并且展望了其发展前景。 相似文献
4.
设计了两种热力学关系记忆图,一种是矢量图,另一种是弧线图。将特性函数所对应的特征变量、特性函数之间的关系、特性函数的微分表示、Maxwell关系式和状态参量的偏微分表示纳入其中。用简单易记的形式使系统的热力学性质推演中常用的繁杂的公式记忆简化,有利于提高记忆的准确度和牢固度。 相似文献
5.
从煤质材料、生产制备工艺方面介绍了影响煤、焦炭标准样品物理化学特性稳定性的因素,以实际煤、焦炭国家标准样品为例,考察了煤、焦炭标准样品物理化学特性值的稳定性,介绍了煤、焦炭标准样品稳定性评价的方法.根据稳定性考察结果,提出了保证煤、焦炭标准样品物理化学特性稳定性的措施. 相似文献
6.
7.
8.
9.
国内火电厂目前对于煤质的检测主要是通过常规的工业分析检测燃煤挥发分、碳、灰分和发热量等指标信息,指导锅炉的运行。在这些常规分析指标中,反映煤的燃烧特性主要是挥发分的多少。但是,仅凭挥发分来衡量煤的燃烧特性是不完全的[1]。此外由于条件限制,目前火电厂对于着火、燃尽等燃烧特性,无法得到。此前,国内一些研究单位采用热重分析技术对我国动力煤燃烧特性进行系统研究,并得到相应的指标。但由于热分析仪大都是从国外进口,仪器成本过高而无法推广和普及。本研究采用基于CO2气体释放法的煤燃烧特性研究可以较快得出煤的着火点、… 相似文献
10.
引言高分子溶液的特性粘数是一个十分重要的物理量。它和大分子的化学结构、分子量和大分子在溶液中的形态、尺寸大小等重要特性有关。特性粘数和分子量之间的联系更被广泛地利用于测定分子量。因此,如何准确而又简便地测定特性粘数值一向被人们所重视。无数实验事实表明,高分子溶液并非牛顿流体。特性粘数随切变速度的增加而下降,其下降量的大小随分子链刚硬程度、溶剂性能良好程度和分子量的增 相似文献
11.
用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%. 相似文献
12.
Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction
Laurent Gavara Thomas Boisse Jean-Pierre Hénichart Adam Daïch Philippe Gautret 《Tetrahedron》2010,66(38):7544-5571
In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments. 相似文献
13.
The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula. 相似文献
14.
Rebecca J. Burton Mandy L. CrowtherNeal J. Fazakerley Shaun M. FilleryBarry M. Hayter Jason G. KettleCaroline A. McMillan Paula PerkinsPeter Robins Peter M. SmithEmma J. Williams Gail L. Wrigley 《Tetrahedron letters》2013
The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines. 相似文献
15.
KMnO4-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields. 相似文献
16.
N. A. Nedolya 《Chemistry of Heterocyclic Compounds》2008,44(10):1165-1219
The review contains a concise historical account and information on the most significant researches undertaken by the staff
at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry
of Heterocyclic Compounds.
Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee.
Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008. 相似文献
17.
Regiospecific and direct imidation of the methyl C(sp3)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products. 相似文献
18.
19.
《Tetrahedron》2014,70(21):3377-3384
The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative. 相似文献
20.
Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields. 相似文献