Cellulose-SO3H as a recyclable catalyst for the synthesis of tetrahydropyranols via Prins cyclization

Tetrahydropyranols are prepared in good yields and with high cis-selectivity by means of the Prins cyclization using cellulose-sulfonic acid under mild reaction conditions. This is the first report on the preparation of tetrahydropyranols using epoxides and homoallylic alcohols via Prins cyclization.     

Lewis acid-catalyzed one-pot crossed Prins cyclizations using allylchlorosilane as allylating agent

A one-pot multi-component Lewis acid-catalyzed Prins cyclization was developed with high yield and selectivity. The crossed 2,4,6-trisubstituted tetrahydropyran products were formed with high stereoselectivity. This catalytic method could also be used with α,β-unsaturated aldehydes affording moderate yields of products.     

HBF4·OEt2 as a versatile reagent for the Hosomi-Sakurai allylation and Prins cyclization: one-pot synthesis of symmetrical 4-fluorotetrahydropyrans

The synthesis of symmetrical 2,6-disubstituted 4-fluorotetrahydropyran derivatives has been achieved using HBF₄·OEt₂ via a tandem allylation and Prins cyclization. This is a highly efficient and diastereoselective approach for the preparation of 4-fluorotetrahydropyrans in a single step. The use of readily available and easy to handle reagent HBF₄·OEt₂ makes this method simple, convenient and practical.     

A new semi-empirical kinetic method for the determination of ion exchange constants for the counterions of cationic micelles

A new method, based upon semi-empirical kinetic approach, for the determination of ion exchange constant for ion exchange processes occurring between counterions at the cationic micellar surface is described in this review article. Basically, the method involves a reaction kinetic probe which gives observed pseudo-first-order rate constants (k_obs) for a nucleophilic substitution reaction between the nonionic and anionic reactants (R and S) in the presence of a constant concentration of both reactants as well as cationic micelles and varying concentrations of an inert inorganic or organic salt (MX). The observed data (k_obs, versus [MX]) fit satisfactorily (in terms of residual errors) to an empirical equation which could be derived from an equation explaining the mechanism of the reaction of the kinetic probe in terms of pseudophase micellar (PM) model coupled with another empirical equation. This (another) empirical equation explains the effect of [MX] on cationic micellar binding constant (K_S) of the anionic reactant (say S) and gives an empirical constant, K_X/S. The magnitude of K_X/S is the measure of the ability of X⁻ to expel S⁻ from a cationic micellar pseudophase to the bulk aqueous phase through ion exchange X⁻/S⁻. The values of K_X/S and K_Y/S (where Y⁻ is another inert counterion) give the ion exchange constant, K_X^Y (= K_X/K_Y where K_X and K_Y represent cationic micellar binding constants of X⁻ and Y⁻, respectively). The suitability of this method is demonstrated by the use of three different reaction kinetic probes and various MX.     

A mass spectrometric method to determine activities of enzymes involved in polyamine catabolism

An analytical method for the determination of three polyamines (putrescine, spermidine, and spermine) and five acetylpolyamines [N¹-acetylspermidine (N¹AcSpd), N⁸-acetylspermidine (N⁸AcSpd), N¹-acetylspermine, N¹,N⁸-diacetylspermidine, and N¹,N¹²-diacetylspermine] involved in the polyamine catabolic pathway has been developed using a hybrid tandem mass spectrometer. Heptafluorobutyryl (HFB) derivatives of these compounds and respective internal standards labeled with stable isotopes were analyzed simultaneously by TOF MS, based on peak areas appearing at appropriate m/z values. The isomers, N¹AcSpd and N⁸AcSpd were determined from their fragment ions, the acetylamidopropyl and acetylamidobutyl groups, respectively, using MS/MS with ¹³C₂-N¹AcSpd and ¹³C₂-N⁸AcSpd which have the ¹³C₂-acetyl group as an internal standard. The TOF MS method was successfully applied to measure the activity of enzymes involved in polyamine catabolic pathways, namely N¹-acetylpolyamine oxidase (APAO), spermine oxidase (SMO), and spermidine/spermine N¹-acetyltransferase (SSAT). The following natural substrates and products labeled with stable isotopes considering the application to biological samples were identified; for APAO, [4,9,12-¹⁵N₃]-N¹-acetylspermine and [1,4,8-¹⁵N₃]spermidine (¹⁵N₃-Spd), respectively; for SMO, [1,4,8,12-¹⁵N₄]spermine and ¹⁵N₃-Spd, respectively; and for SSAT, ¹⁵N₃-Spd and [1,4,8-¹⁵N₃]-N¹-acetylspermidine, respectively.     

Determination of oil reservoir radiotracer (SCN) in a single step using a plastic scintillator extractive resin

The analysis of radiotracers is important in the study of oil reservoir dynamics. One of the most widely used radiotracer is S¹⁴CN⁻. Prior to activity measurements by Liquid Scintillation (LS), routine determinations require the pretreatment steps of purification and concentration of the samples using anion exchange columns. The final elution media produces samples with high salt concentration that may lead to problems with phase separation during the LS measurement. Plastic Scintillation (PS) is an alternative technique that provides a solid surface that can be used as a platform for the immobilisation of selective extractants to obtain a PS resin. The proposed procedure unifies chemical separation and sample measurement preparation in a single step, serving to reduce the number of reagents needed and manpower required for the analysis while also avoiding mixed waste production by LS.     

Highly efficient deprotection of phenolic tetrahydropyranyl and methoxymethyl ethers and sequel cyclization to indanones using Sn(IV)Cl4 catalyst

Sn(IV)Cl₄ catalyst provided a rapid and efficient deprotection method for the phenolic THP and MOM ethers and sequel intramolecular Friedel–Crafts alkylation reaction of THP and MOM protected chalcone epoxides under mild conditions. The reaction took 2–3 min to give the products in excellent yield (90–98%) at 0 °C without affecting the other functional groups.     

Efficient synthesis of xanthenedione derivatives using cesium salt of phosphotungstic acid as a heterogeneous and reusable catalyst in water

Cs_2.5H_0.5PW₁₂O₄₀ has been reported to be an efficient catalyst for the synthesis of 1,8-dioxo-octahydroxanthene from aldehydes and 1,3-cyclohexanedione/dimedone in water. This approach is environmentally benign with clean synthetic procedure, short reaction time, easy workup procedure, excellent yield, and regeneration of catalyst, which made this protocol efficient and safe.     

A simple and efficient method for α-bromination of carbonyl compounds using N-bromosuccinimide in the presence of silica-supported sodium hydrogen sulfate as a heterogeneous catalyst

α-Bromination of carbonyl compounds (cyclic and acyclic ketones, amides and β-ketoesters) has been achieved efficiently by treatment with N-bromosuccinimide (NBS) and catalyzed by silica-supported sodium hydrogen sulfate (NaHSO₄·SiO₂). The products were formed in high yields under mild reaction conditions and in short reaction times.     

Potentiometric study of complexation of phenylaza-15-crown-5, 4-nitrobenzo-15-crown-5 and dibenzopyridino-18-crown-6 and other derivative of 18-crowns-6 with Na+ ion in methanol

The complexation reaction of phenylaza-15-crown-5, and 4-nitrobenzo-15-crown-5, benzo-15-crown-5 and dibenzopyrdino-18-crwon-6, dibenzo-18-crown-6,dicyclohexyl-18-crown-6(cis and trans), and 18-crown-6 with Na⁺ ion in methanol have been studied by potentiometric method. The Na⁺ ion-selective electrode has been used both as indicator and reference electrode. The stoichiometry and stability constants of complexes of these crown ethers with sodium ion were evaluated by MINIQUAD program. The major trend of stability of resulting complexes of these macrocycle with Na⁺ ion varied in the order DCY18C6 > DB18C6 > 18C6 > DBPY18C6 > phenylaza-15C5 > benzo-15C5 > 4-nitrobenzo-15C5. The obtained results in particular stability constant of complexes of DBPY18C6, phenylaza-15C5 and 4-nitrobenzo-15C5 with sodium ion in comparison with other crowns ether are novel, and interesting.     

Li ion diffusion in Li4Ti5O12 thin film electrode prepared by PVP sol-gel method

Li₄Ti₅O₁₂ thin films for rechargeable lithium batteries were prepared by a sol-gel method with poly(vinylpyrrolidone). Interfacial properties of lithium insertion into Li₄Ti₅O₁₂ thin film were examined by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and potentiostatic intermittent titration technique (PITT). Redox peaks in CV were very sharp even at a fast scan rate of 50 mV s⁻¹, indicating that Li₄Ti₅O₁₂ thin film had a fast electrochemical response, and that an apparent chemical diffusion coefficient of Li⁺ ion was estimated to be 6.8×10⁻¹¹ cm² s⁻¹ from a dependence of peak current on sweep rates. From EIS, it can be seen that Li⁺ ions become more mobile at 1.55 V vs. Li/Li⁺, corresponding to a two-phase region, and the chemical diffusion coefficients of Li⁺ ion ranged from 10⁻¹⁰ to 10⁻¹² cm² s⁻¹ at various potentials. The chemical diffusion coefficients of Li⁺ ion in Li₄Ti₅O₁₂ were also estimated from PITT. They were in a range of 10⁻¹¹-10⁻¹² cm² s⁻¹.     

空气中合成M2B4O7:Eu3+(M=Na,K)荧光体及其性质表征

以M2B4O7(M=Na,K)为基质,在空气中掺杂稀土元素Eu3+得到了Na2B4O7:Eu3+和K2B4O7:Eu3+荧光体.探讨了体系的烧结条件和荧光性质,分析了晶体的结构.结果表明,虽然两种体系的最佳合成条件不同,但是体系中都同时存在[BO4]和[BO3]结构;稀土离子Eu3+的发光以电偶极跃迁5D0-7F2为主,处于非中心对称的格位上,并且可以很好地存在于基质中,Na2B4O7:Eu3+具有较强的发光强度.     

Efficient synthesis of mono- and disubstituted 2,3-dihydroquinazolin-4(1H)-ones using KAl(SO4)2·12H2O as a reusable catalyst in water and ethanol

KAl(SO₄)₂·12H₂O was found to catalyze efficiently a one-pot three-component cyclocondensation of isatoic anhydride and primary amines or ammonia sources such as (NH₄)₂CO₃, NH₄OAc and NH₄Cl with aromatic aldehydes under mild conditions to afford the corresponding mono- and disubstituted 2,3-dihydroquinazolin-4(1H)-ones in good yields.     

Development of an improved method to extract pesticide residues in foods using acetonitrile with magnesium sulfate and chloroform

A multiresidue method was developed based on extraction of 10 g sample with 10 mL acetonitrile and subsequent liquid–liquid partitioning formed by adding 4 g MgSO₄ plus 1 mL chloroform. During the partitioning process, the extraction recoveries of polar analytes were found to be essentially determined by the acetonitrile content in the aqueous phase. The use of MgSO₄ gave the least acetonitrile left in the aqueous phase (lower than 5%) and thus promoting complete partitioning of analytes into the organic phase. At the same time, removal of water from the acetonitrile phase was achieved by adding only a small amount of chloroform with no influence on the acetonitrile content in the aqueous phase, thus leading to decreasing the co-extraction of polar matrix components. The most complete mutual separation of acetonitrile and water was achieved by the joint use of MgSO₄ and chloroform and thus the optimal extraction recovery and analytical selectivity were obtained simultaneously. The new method, with higher recoveries of polar analytes, better analytical selectivity and simpler manipulation, is a claimed improvement to the original QuEChERS method. The proposed method was finally validated by the determination of 20 pesticides in a mixed food matrix by using liquid chromatography tandem mass spectrum (LC–MS/MS). Acceptable linearity, sensitivity, recovery, precision and selectivity results were obtained.